Organ-like Structures Research Articles

Low concentrations of saracatinib promote definitive endoderm differentiation through inhibition of FAK-YAP signaling axis

Optimizing the efficiency of definitive endoderm (DE) differentiation is necessary for the generation of diverse organ-like structures. In this study, we used the small molecule inhibitor saracatinib (SAR) to enhance DE differentiation of human embryonic stem cells and induced pluripotent stem cells. SAR significantly improved DE differentiation efficiency at low concentrations. The interaction between SAR and Focal Adhesion Kinase (FAK) was explored through RNA-seq and molecular docking simulations, which further supported the inhibition of DE differentiation by p-FAK overexpression in SAR-treated cells. In addition, we found that SAR inhibited the nuclear translocation of Yes-associated protein (YAP), a downstream effector of FAK, which promoted DE differentiation. Moreover, the addition of SAR enabled a significant reduction in activin A (AA) from 50 to 10 ng/mL without compromising DE differentiation efficiency. For induction of the pancreatic lineage, 10 ng/ml AA combined with SAR at the DE differentiation stage yielded a comparative number of PDX1+/NKX6.1+ pancreatic progenitor cells to those obtained by 50 ng/ml AA treatment. Our study highlights SAR as a potential modulator that facilitates the cost-effective generation of DE cells and provides insight into the orchestration of cell fate determination.Graphical

Organoids, Biocybersecurity, and Cyberbiosecurity—A Light Exploration

Organoids present immense promise for studying organ systems and their functionality. Recently, they have become the subject of exploration outside of purely biomedical uses in multiple directions. We will explore the rapidly evolving landscape of organoid research over the 21st century, discussing significant advancements in organoid research and highlighting breakthroughs, methodologies, and their transformative impact on our understanding of physiology and modeling. In addition, we will explore their potential use for biocomputing and harnessing organoid intelligence, investigate how these miniaturized organ-like structures promise to create novel computational models and processing platforms allowing for innovative approaches in drug discovery, personalized medicine, and disease prediction. Lastly, we will address the ethical dilemmas surrounding organoid research by dissecting the intricate ethical considerations related to the creation, use, and potential implications of these in vitro models. Through this work, the goal of this paper is to provide introductory perspectives and bridges that will connect organoids to cybersecurity applications and the imperative ethical discourse accompanying its advancements with commentary on future uses.

Three-Dimensional Cell Culture Models to Investigate the Epithelial Barrier in Eosinophilic Esophagitis.

The squamous epithelium of the esophagus is directly exposed to the environment, continuously facing foreign antigens, including food antigens and microbes. Maintaining the integrity of the epithelial barrier is critical for preventing infections and avoiding inflammation caused by harmless food-derived antigens. This article provides simplified protocols for generating human esophageal organoids and air-liquid interface cultures from patient biopsies to study the epithelial compartment of the esophagus in the context of tissue homeostasis and disease. These protocols have been significant scientific milestones in the last decade, describing three-dimensional organ-like structures from patient-derived primary cells, organoids, and air-liquid interface cultures. They offer the possibility to investigate the function of specific cytokines, growth factors, and signaling pathways in the esophageal epithelium within a three-dimensional framework while maintaining the phenotypic and genetic properties of the donor. Organoids provide information on tissue microarchitecture by assessing the transcriptome and proteome after cytokine stimulation. In contrast, air-liquid interface cultures allow the assessment of the epithelial barrier integrity through transepithelial resistance (TEER) or macromolecule flux measurements. Combining these organoids and air-liquid interface cultures is a powerful tool to advance research in impaired esophageal epithelial barrier conditions.

Prostate Cancer Organoids for Tumor Modeling and Drug Screening.

Prostate cancer (PCa) is the second most common malignancy and the fifth leading cause of cancer death in men worldwide. Despite its prevalence, the highly heterogenic PCa has shown difficulty to establish representative cell lines that reflect the diverse phenotypes and different stages of the disease in vitro and hence hard to model in preclinical research. The patient-derived organoid (PDO) technique has emerged as a groundbreaking three-dimensional (3D) tumor modeling platform in cancer research. This versatile assay relies on the unique ability of cancer stem cells (CSCs) to self-organize and differentiate into organ-like mini structures. The PDO culture system allows for the long-term maintenance of cancer cells derived from patient tumor tissues. Moreover, it recapitulates the parental tumor features and serves as a superior preclinical model for in vitro tumor representation and personalized drug screening. Henceforth, PDOs hold great promise in precision medicine for cancer. Herein, we describe the detailed protocol to establish and propagate organoids derived from isolated cell suspensions of PCa patient tissues or cell lines using the 3D semisolid Matrigel™-based hanging-drop method. In addition, we highlight the relevance of PDOs as a tool for evaluating drug efficacy and predicting tumor response in PCa patients.

Three-dimensional cell cultivation and bioprinting

The paper presents approaches to the formation of flat and three-dimensional cellular patterns using bioprinting methods, discusses the features of three-dimensional culture, when due to more intensive intercellular interactions the cell ensemble has properties that are not typical for single cells, the conditions necessary for the emergence of self-organization processes are created in the system of interacting cells, transformation into tissue-like and organ-like structures. Modern bioprinting methods provide increased productivity of these processes by engineering the additional levels of organization.

Organoid intelligence: Integration of organoid technology and artificial intelligence in the new era of in vitro models

Organoid Intelligence ushers in a new era by seamlessly integrating cutting-edge organoid technology with the power of artificial intelligence. Organoids, three-dimensional miniature organ-like structures cultivated from stem cells, offer an unparalleled opportunity to simulate complex human organ systems in vitro. Through the convergence of organoid technology and AI, researchers gain the means to accelerate discoveries and insights across various disciplines. Artificial intelligence algorithms enable the comprehensive analysis of intricate organoid behaviors, intricate cellular interactions, and dynamic responses to stimuli. This synergy empowers the development of predictive models, precise disease simulations, and personalized medicine approaches, revolutionizing our understanding of human development, disease mechanisms, and therapeutic interventions. Organoid Intelligence holds the promise of reshaping how we perceive in vitro modeling, propelling us toward a future where these advanced systems play a pivotal role in biomedical research and drug development.

In vitro microvascular engineering approaches and strategies for interstitial tissue integration.

The increasing gap between clinical demand for tissue or organ transplants and the availability of donated tissue highlights the emerging opportunities for lab-grown or synthetically engineered tissue. While the field of tissue engineering has existed for nearly half a century, its clinical translation remains unrealised, in part, due to a limited ability to engineer sufficient vascular supply into fabricated tissue, which is necessary to enable nutrient and waste exchange, prevent cellular necrosis, and support tissue proliferation. Techniques to develop anatomically relevant, functional vascular networks in vitro have made significant progress in the last decade, however, the challenge now remains as to how best incorporate these throughout dense parenchymal tissue-like structures to address diffusion-limited development and allow for the fabrication of large-scale vascularised tissue. This review explores advances made in the laboratory engineering of vasculature structures and summarises recent attempts to integrate vascular networks together with sophisticated in vitro avascular tissue and organ-like structures. STATEMENT OF SIGNIFICANCE: The ability to grow full scale, functional tissue and organs in vitro is primarily limited by an inability to adequately diffuse oxygen and nutrients throughout developing cellularised structures, which generally results from the absence of perfusable vessel networks. Techniques to engineering both perfusable vascular networks and avascular miniaturised organ-like structures have recently increased in complexity, sophistication, and physiological relevance. However, integrating these two essential elements into a single functioning vascularised tissue structure represents a significant spatial and temporal engineering challenge which is yet to be surmounted. Here, we explore a range of vessel morphogenic phenomena essential for tissue-vascular co-development, as well as evaluate a range of recent noteworthy approaches for generating vascularised tissue products in vitro.

Mass production of lumenogenic human embryoid bodies and functional cardiospheres using in-air-generated microcapsules

Organoids are engineered 3D miniature tissues that are defined by their organ-like structures, which drive a fundamental understanding of human development. However, current organoid generation methods are associated with low production throughputs and poor control over size and function including due to organoid merging, which limits their clinical and industrial translation. Here, we present a microfluidic platform for the mass production of lumenogenic embryoid bodies and functional cardiospheres. Specifically, we apply triple-jet in-air microfluidics for the ultra-high-throughput generation of hollow, thin-shelled, hydrogel microcapsules that can act as spheroid-forming bioreactors in a cytocompatible, oil-free, surfactant-free, and size-controlled manner. Uniquely, we show that microcapsules generated by in-air microfluidics provide a lumenogenic microenvironment with near 100% efficient cavitation of spheroids. We demonstrate that upon chemical stimulation, human pluripotent stem cell-derived spheroids undergo cardiomyogenic differentiation, effectively resulting in the mass production of homogeneous and functional cardiospheres that are responsive to external electrical stimulation. These findings drive clinical and industrial adaption of stem cell technology in tissue engineering and drug testing.

Advances in organoid technology for veterinary disease modeling.

Organoids are in vitro organ-like structures that faithfully recapitulate many characteristics of a specific organ. During the past decades, major progress has been accomplished in establishing three-dimensional (3D) culture systems toward stem cell-derived organoids. As a significant technological breakthrough, these amazing 3D organoid constructs bridge the conventional 2D in vitro models and in vivo animal models and provide an unprecedented opportunity to investigate the complexities of veterinary diseases ranging from their pathogenesis to the prevention, therapy, or even future organ replacement strategies. In this review, we briefly discuss several definitions used in organoid research and highlight the currently known achievements in modeling veterinary diseases, including infectious and inflammatory diseases, cancers, and metabolic diseases. The applications of organoid technology in veterinary disease modeling are still in their infancy stage but the future is promising.

Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications.

Vat photopolymerization (VP), including stereolithography (SLA), digital light processing (DLP), and volumetric printing, employs UV or visible light to solidify cell-laden photoactive bioresin contained within a vat in a point-by-point, layer-by-layer, or volumetric manner. VP-based bioprinting has garnered substantial attention in both academia and industry due to its unprecedented control over printing resolution and accuracy, as well as its rapid printing speed. It holds tremendous potential for the fabrication of tissue- and organ-like structures in the field of regenerative medicine. This review summarizes the recent progress of VP in the fields of tissue engineering and regenerative medicine. First, it introduces the mechanism of photopolymerization, followed by an explanation of the printing technique and commonly used biomaterials. Furthermore, the application of VP-based bioprinting in tissue engineering was discussed. Finally, the challenges facing VP-based bioprinting are discussed, and the future trends in VP-based bioprinting are projected.

Antibody-dependent cellular cytotoxicity-inducing antibodies enhance the natural killer cell anti-cancer response against patient-derived pancreatic cancer organoids.

Pancreatic cancer is associated with poor prognosis, and limited treatment options are available for the majority of patients. Natural killer (NK) cells in combination with antibodies inducing antibody-dependent cell-mediated cytotoxicity (ADCC) could be a highly effective new therapeutic option in pancreatic cancer. Accurate predictive preclinical models are needed to develop successful NK cell immunotherapy. Tumor organoids, in vitro 3D organ-like structures that retain important pathophysiological characteristics of the in vivo tumor, may provide such a model. In the current study, we assessed the cytotoxic potential of adoptive NK cells against human pancreatic cancer organoids. We hypothesized that NK cell anti-tumor responses could be enhanced by including ADCC-triggering antibodies. We performed cytotoxicity assays with healthy donor-derived IL-2-activated NK cells and pancreatic cancer organoids from four patients. A 3D cytotoxicity assay using live-cell-imaging was developed and enabled real-time assessment of the response. We show that NK cells migrate to and target pancreatic cancer organoids, resulting in an increased organoid death, compared to the no NK cell controls (reaching an average fold change from baseline of 2.1±0.8 vs 1.4±0.6). After 24-hours of co-culture, organoid 2D growth increased. Organoids from 2 out of 4 patients were sensitive to NK cells, while organoids from the other two patients were relatively resistant, indicating patient-specific heterogeneity among organoid cultures. The ADCC-inducing antibodies avelumab (anti-PD-L1) and trastuzumab (anti-HER2) increased NK cell-induced organoid cell death (reaching an average fold change from baseline of 3.5±1.0 and 4.5±1.8, respectively). Moreover, combination therapy with avelumab or trastuzumab resulted in complete disintegration of organoids. Finally, inclusion of ADCC-inducing antibodies was able to overcome resistance in NK-organoid combinations with low or no kill. These results support the use of organoids as a relevant and personalized model to study the anti-tumor response of NK cells in vitro and the potential of ADCC-inducing antibodies to enhance NK cell effector function.

The Impact of Gold Nanoparticles on Somatic Embryogenesis Using the Example of Arabidopsis thaliana.

Although the influence of nanoparticles (NPs) on developmental processes is better understood, little is known about their impact on somatic embryogenesis (SE). This process involves changes in the direction of cell differentiation. Thus, studying the effect of NPs on SE is essential to reveal their impact on cell fate. This study aimed to examine the influence of gold nanoparticles (Au NPs) with different surface charges on the SE of 35S:BBM Arabidopsis thaliana, with particular emphasis on the spatiotemporal localization of pectic arabinogalactan proteins (AGPs) and extensin epitopes in cells changing the direction of their differentiation. The results show that under the influence of nanoparticles, the explant cells of 35S:BBM Arabidopsis thaliana seedling origin did not enter the path of SE. Bulges and the formation of organ-like structures were observed in these explants, in contrast to the control, where somatic embryos developed. Additionally, spatiotemporal changes in the chemical composition of the cell walls during the culture were observed. Under the influence of Au NPs, the following effects were observed: (1) explant cells did not enter the SE pathway, (2) the impacts of Au NPs with different surface charges on the explants were variable, and (3) the compositions of the analyzed pectic AGPs and extensin epitopes were diverse in the cells with different developmental programs: SE (control) and non-SE (treated with Au NPs).

The tumor immune microenvironment of nasopharyngeal carcinoma after gemcitabine plus cisplatin treatment.

Gemcitabine plus cisplatin (GP) chemotherapy is the standard of care for nasopharyngeal carcinoma (NPC). However, the mechanisms underpinning its clinical activity are unclear. Here, using single-cell RNA sequencing and T cell and B cell receptor sequencing of matched, treatment-naive and post-GP chemotherapy NPC samples (n = 15 pairs), we show that GP chemotherapy activated an innate-like B cell (ILB)-dominant antitumor immune response. DNA fragments induced by chemotherapy activated the STING type-I-interferon-dependent pathway to increase major histocompatibility complex class I expression in cancer cells, and simultaneously induced ILB via Toll-like receptor 9 signaling. ILB further expanded follicular helper and helper type 1 T cells via the ICOSL-ICOS axis and subsequently enhanced cytotoxic T cells in tertiary lymphoid organ-like structures after chemotherapy that were deficient for germinal centers. ILB frequency was positively associated with overall and disease-free survival in a phase 3 trial of patients with NPC receiving GP chemotherapy ( NCT01872962 , n = 139). It also served as a predictor for favorable outcomes in patients with NPC treated with GP and immunotherapy combined treatment (n = 380). Collectively, our study provides a high-resolution map of the tumor immune microenvironment after GP chemotherapy and uncovers a role for B cell-centered antitumor immunity. We also identify and validate ILB as a potential biomarker for GP-based treatment in NPC, which could improve patient management.

A Novel 3D‐Bioprinting Technology of Orderly Extruded Multi‐Materials via Photopolymerization (Adv. Mater. Technol. 12/2023)

3D-Bioprinting The novel Photopolymerization of Orderly Extruded Multi-materials (POEM) technique enables rapid, high-resolution, and precise biofabrication of multi-layered, multi-material 3D live constructs, as presented in article number 2201926 by Rahim Esfandyarpour and co-workers. With the ultimate goal of mimicking the in-vivo configuration of human organs and tissues, POEM represents a cutting-edge approach to 3D biomanufacturing of complex, organ-like structures in-vitro.

Legal regulation of additive technologies in modern biomedicine

Research reveals the legal problems that arise due to the rapid pace of development of additive technologies (3D printing) in biomedicine (bioprinting). The purpose of the research is to analyze the legislation that defines the legal regime of additive technologies, identify the main gaps in regulation, carry out a comparative legal study, which allows to formulate recommendations to improve Russian legislation. Special strategies are used as an object of comparative research; they contribute to fix the priority development of 3D printing. The employed methods are as follows: the method of analysis of legal regulation, comparative legal and formal legal. Results. Attention is paid to the main trends and risks of progress in this direction, which are reflected in decentralization of production; improving its efficiency and reducing waste; reduction of development time and their introduction into mass production with a simultaneous rise in quality of the finished product; expanding the population's access to material goods; minimizing the state control. Particular attention is paid to the legal assessment of the applicability of bioprinting in transplantology, the manufacture of implants, surgical planning, and the use of printed organs for experiments. Conclusions: when adjusting the legal framework, institutional readiness should be taken into account - the ability of the entire Russian healthcare system to use additive technologies properly (which will require significant changes in healthcare legislation). An independent direction is the use of bioprinting in the testing of drugs. 3D printing creates small organ-like structures (they are called organoids) on which experiments can be carried out for the screening of pharmaceuticals. This will require changes in the legal regime for the circulation of medicines, as well as the main functions of the state regulator (the Russian Ministry of Health and Roszdravnadzor). It is noted that additive technologies make it possible to manufacture medicines, but world experience indicates a cautious attitude towards this type of production. Research argues for the need to follow a risk-based approach in the legal regulation of bioprinting, as well as to introduce the general approach of Hospital Exemption (pharmaceutical exclusion) used in the countries of the European Union, as well as some other countries aimed at the development of regenerative medicine.

Stemming Tumoral Growth: A Matter of Grotesque Organogenesis.

The earliest metazoans probably evolved from single-celled organisms which found the colonial system to be a beneficial organization. Over the course of their evolution, these primary colonial organisms increased in size, and division of labour among the cells became a remarkable feature, leading to a higher level of organization: the biological organs. Primitive metazoans were the first organisms in evolution to show organ-type structures, which set the grounds for complex organs to evolve. Throughout evolution, and concomitant with organogenesis, is the appearance of tissue-specific stem cells. Tissue-specific stem cells gave rise to multicellular living systems with distinct organs which perform specific physiological functions. This setting is a constructive role of evolution; however, rebel cells can take over the molecular mechanisms for other purposes: nowadays we know that cancer stem cells, which generate aberrant organ-like structures, are at the top of a hierarchy. Furthermore, cancer stem cells are the root of metastasis, therapy resistance, and relapse. At present, most therapeutic drugs are unable to target cancer stem cells and therefore, treatment becomes a challenging issue. We expect that future research will uncover the mechanistic "forces" driving organ growth, paving the way to the implementation of new strategies to impair human tumorigenesis.

Applications for Colon Organoid Models in Cancer Research

Organoids are 3D organ-like structures grown from stem cells in vitro that mimic the organ or disease from which they are derived. Due to their stem cell origin, organoids contain a heterogeneous population of cells reflecting the diversity of cell types seen in vivo. Similarly, tumour organoids reflect intratumoural heterogeneity in a way that traditional 2D cell culture and cell lines do not, and, therefore, they show greater promise as a more relevant model for effective disease modelling and drug testing. Tumour organoids arise from cancer stem cells, which contribute to many of the greatest challenges to cancer treatment, including therapy resistance, tumour recurrence, and metastasis. In this review, we outline methods for generating colon organoids from patient-derived normal and tumour tissues. Furthermore, we discuss organoid biobanking, applications of organoids in disease modelling, and a range of platforms applicable to high-throughput drug testing, including apical-out/reverse-polarity colon organoids.

Protruding cantilever microelectrode array to monitor the inner electrical activity of cerebral organoids.

Stem cell-derived cerebral organoids are artificially grown miniature organ-like structures mimicking embryonic brain architecture. They are composed of multiple neural cell types with 3D cell layer organization exhibiting local field potential. Measuring the extracellular electrical activity by means of conventional planar microelectrode arrays is particularly challenging due to the 3D architecture of organoids. In order to monitor the intra-organoid electrical activity of thick spheroid-shaped samples, we developed long protruding microelectrode arrays able to penetrate the inner regions of cerebral organoids to measure the local potential of neurons within the organoids. A new microfabrication process has been developed which, thanks to the relaxation of internal stresses of a stack of materials deposited over a sacrificial layer, allows one to build a protruding cantilever microelectrode array placed at the apex of beams which rise vertically, over two hundred microns. These slender beams inserted deeply into the organoids give access to the recording of local field potential from neurons buried inside the organoid. This novel device shall provide valuable tools to study neural functions in greater detail.

Towards spatially-organized organs-on-chip: Photopatterning cell-laden thiol-ene and methacryloyl hydrogels in a microfluidic device.

Micropatterning techniques for 3D cell cultures enable the recreation of tissue-level structures, but the combination of patterned hydrogels with organs-on-chip to generate organized 3D cultures under microfluidic perfusion remains challenging. To address this technological gap, we developed a user-friendly in-situ micropatterning protocol that integrates photolithography of crosslinkable, cell-laden hydrogels with a simple microfluidic housing, and tested the impact of crosslinking chemistry on stability and spatial resolution. Working with gelatin functionalized with photo-crosslinkable moieties, we found that inclusion of cells at high densities (≥ 107/mL) did not impede thiol-norbornene gelation, but decreased the storage moduli of methacryloyl hydrogels. Hydrogel composition and light dose were selected to match the storage moduli of soft tissues. To generate the desired pattern on-chip, the cell-laden precursor solution was flowed into a microfluidic chamber and exposed to 405 nm light through a photomask. The on-chip 3D cultures were self-standing and the designs were interchangeable by simply swapping out the photomask. Thiol-ene hydrogels yielded highly accurate feature sizes from 100 - 900 μm in diameter, whereas methacryloyl hydrogels yielded slightly enlarged features. Furthermore, only thiol-ene hydrogels were mechanically stable under perfusion overnight. Repeated patterning readily generated multi-region cultures, either separately or adjacent, including non-linear boundaries that are challenging to obtain on-chip. As a proof-of-principle, primary human T cells were patterned on-chip with high regional specificity. Viability remained high (> 85%) after 12-hr culture with constant perfusion. We envision that this technology will enable researchers to pattern 3D co-cultures to mimic organ-like structures that were previously difficult to obtain.

Geometric engineering of organoid culture for enhanced organogenesis in a dish.

Here, we introduce a facile, scalable engineering approach to enable long-term development and maturation of organoids. We have redesigned the configuration of conventional organoid culture to develop a platform that converts single injections of stem cell suspensions to radial arrays of organoids that can be maintained for extended periods without the need for passaging. Using this system, we demonstrate accelerated production of intestinal organoids with significantly enhanced structural and functional maturity, and their continuous development for over 4 weeks. Furthermore, we present a patient-derived organoid model of inflammatory bowel disease (IBD) and its interrogation using single-cell RNA sequencing to demonstrate its ability to reproduce key pathological features of IBD. Finally, we describe the extension of our approach to engineer vascularized, perfusable human enteroids, which can be used to model innate immune responses in IBD. This work provides an immediately deployable platform technology toward engineering more realistic organ-like structures in a dish.