Signal Timing Optimization Research Articles

Development of the intelligent traffic light system based on image processing and fuzzy control techniques

In Viet Nam's current traffic conditions, congestion and jams—especially at intersections during peak hours—present major challenges. Traditional traffic light systems, which rely on fixed timing principles, often fail to manage traffic flow efficiently, particularly when vehicle density varies significantly across different directions. This research aims to develop an intelligent traffic light system where the signal timings automatically adjust based on the vehicle density at intersections. The study uses an object recognition algorithm to identify, classify, and count vehicles. The data was then fed into a fuzzy logic model to calculate the optimal signal timings. Experimental results demonstrate an accuracy of approximately 88% in vehicle detection. The fuzzy logic model and the programmable logic controller were able to effectively compute reasonable signal timings based on real-time vehicle density. Future developments include expanding the system's functionalities, creating a user-friendly interface, and developing a management application for mobile devices.

MODELS FOR REAL-TIME TRAFFIC FLOW MANAGEABILITY AND DECISION-MAKING IN INTELLIGENT TRANSPORTATION SYSTEMS

This article explores models in Intelligent Transportation Systems for real-time traffic flow manageability, focusing on decision-making processes. It covers forecasting, planning, implementing, and controlling strategies to manage traffic flow and ease congestion. Traffic flow prediction models, like dynamic route guidance and traffic flow prediction, utilize historical data and real-time inputs for proactive decision-making. Traffic flow planning models, such as dynamic route guidance index and route efficiency factor, aid in route selection and signal timing optimization. In order to streamline the boundless complexity, the authors assume that it is effective to delineate the managerial capacity paradigm of intelligent transportation systems into the two separate scenarios of “stable and known situation” and “unstable and with large uncertainty situation”. The article proposes a hypothesis to improve the decision-making process in traffic flow. The distinction between these two situations is essential for the smooth running of the business and requires a thorough understanding of the traffic flow in real time, making decisions in intelligent transport systems in order to direct the traffic. The article focuses on data-driven decisions for smoother traffic flow.

Multimodal Signal Retiming Projects: A Survey-Based Exploration of Traffic Signal Professionals’ Practices and Challenges

In the realm of traffic signal operations, the Signal Timing Manual second edition (STM2) serves as a foundational guide for professionals engaged in multimodal signal retiming projects. However, it is acknowledged that the STM2 has its limitations, and real-world conditions often necessitate adaptations in the established procedures. Considering this context, this research endeavors to bridge this gap by conducting a comprehensive survey aimed at traffic signal professionals. This study presents the findings of a comprehensive survey conducted among traffic signal professionals to explore the methodologies, challenges, and practices involved in multimodal signal retiming projects. The survey aimed to obtain detailed insights into the current state of signal retiming, the types of data and tools utilized, and the adaptations necessary to address the complexities of multimodal urban transportation networks. The survey highlights and summarizes responses from 36 professionals across North America, providing insight into both the common strategies and unique challenges faced by those responsible for optimizing signal timings in diverse and dynamic urban environments. The survey results reveal a reliance on diverse tools and data types for signal optimization, highlighting the complexities of accommodating different transportation needs. The findings underscore the importance of tailored approaches and advanced technologies in enhancing signal retiming processes. The insights gained from this study will inform future strategies and enhance the effectiveness of signal retiming procedures in urban areas, thereby contributing to improved traffic management and multimodal transportation efficiency.

Analysis of pedestrian second crossing behavior based on physics-informed neural networks

Pedestrian two-stage crossings are common at large, busy signalized intersections with long crosswalks and high traffic volumes. This design aims to address pedestrian operation and safety by allowing navigation in two stages, negotiating each traffic direction separately. Understanding crosswalk behavior, especially during bidirectional interactions, is essential. This paper presents a two-stage pedestrian crossing model based on Physics-Informed Neural Networks (PINNs), incorporating fluid dynamics equations to determine characteristics such as speed, density, acceleration, and Reynolds number during crossings. The study shows that PINNs outperform traditional deep learning methods in calculating and predicting pedestrian fluid properties, achieving a mean squared error as low as 10–8. The model effectively captures dynamic pedestrian flow characteristics and provides insights into pedestrian behavior impacts. The results are significant for designing pedestrian facilities to ensure comfort and optimizing signal timing to enhance mobility and safety. Additionally, these findings can aid autonomous vehicles in better understanding pedestrian intentions in intelligent transportation systems.

Evaluating the performance of implementing regionally coordinating bus priority signals under different control schemes

Bus Rapid Transit (BRT) proves its effectiveness in alleviating traffic congestion, especially in urban areas. The implementation of Transit Signal Priority (TSP) for BRT has shown a significant reduction in delays. However, in densely populated urban areas, this priority can inadvertently cause additional delays for other modes of transportation. In this paper, we propose a control strategy for Regionally Coordinating Bus Priority Signals Control (RCBPSC) at urban intersections. The aim is not only to reduce bus delays but also to consider minimizing delays for pedestrians and other vehicles. To achieve this, we modeled two consecutive intersections along the Amman BRT. Essentially, we evaluated three different control scenarios in addition to the current base scenario. These scenarios include adaptive traffic signal control, RCBPSC with no signal timing optimization, and RCBPSC with signal optimization. Simulation results indicate that the adaptive traffic signal timing has the worst operational performance in terms of average delay and Level of Service (LOS) compared to the base scenario. Additionally, the results show that BRT delays significantly decrease at both intersections when we implement RCBPSC scenarios. When implementing RCBPSC with optimization scenarios, the results show an average reduction of more than 60% in intersection delay, a decrease in emissions of more than 50%, and an improved LOS for system users compared to the base scenario. The findings of this work can help agencies improve the current operational condition of BRT when implementing RCBPSC.

Distributed optimization for multi-commodity urban traffic control

A distributed method for concurrent traffic signal and routing control of traffic networks is proposed. The method is based on the multi-commodity store-and-forward model, in which the destinations are the commodities. The system benefits from the communication between vehicles and infrastructure, providing optimal signal timings to intersections and routes to vehicles on a link-by-link basis. Using the augmented Lagrangian to model the constraints into the objective, the baseline centralized problem is decomposed into a set of objective-coupled subproblems, one for each intersection, enabling the solution to be computed by a distributed-gradient projection algorithm. The intersection agents only need to communicate and coordinate with neighboring intersections to ensure convergence to the optimal solution while tolerating suboptimal iterations that offer more flexibility, unlike other distributed approaches. Through microsimulation, we demonstrate the effectiveness of the proposed algorithm in traffic networks with time-varying demand. Computational analysis shows that the distributed problem is suitable for real-time applications. A robustness analysis show that the distributed formulation enables a graceful degradation of the system in case of failure.

Integration Traffic Signal Control From Synchro to SUMO

This study investigates the feasibility and challenges of transferring traffic signal control schemes from the macroscopic signal timing optimization tool Synchro to the microscopic traffic simulator SUMO, focusing on Downtown Seattle as a case study. The research assesses the process of sharing and importing traffic signal timing plans, a crucial aspect of transportation simulations, between these two platforms. We conduct a detailed analysis of the traffic signal characteristics and data formats unique to each simulator and identify elements suitable for conversion. Subsequently, a four-stage framework is developed for semi-automatic integration of traffic signal control between the two. Our results indicate a successful conversion rate of approximately 85% of signalized intersections from Synchro to SUMO. This research not only illustrates the challenges and solutions in converting signal control across different platforms but also paves the way for future studies aimed at improving the interoperability of various traffic simulation tools.

Traffic State Comparison of Signalized Intersections Using SIDRA and SYNCHRO Software

The number of shopping malls and vehicles in Baghdad has quickly increased along with the city's population. This has resulted in an increase in daily trips, which affects the roadway network's traffic flow and causes congestion, particularly on Al-Mansour Street and Al-Rowad Street near the city center. To determine the best signal time, the 14th Ramadan signalized intersection was evaluated and analyzed using the SIDRA 8.0 and SYNCHRO 11.0 software. First, the findings revealed that the chosen traffic facility is presently experiencing a substantial reduction in service level that is leading to forced conditions (LOS "F"). It is suggested that the cycle time at the intersection of the 14th Ramadan be changed from 240 seconds to 160 seconds and 125 seconds in SIDRA and SYNCHRO, respectively. Signal timings have reduced the delay for the 14th Ramadan intersection (76.8%), thus improving LOS from (F) to (D) for the intersection. The best delays after optimization in SYNCHRO 11.0, however, were 31% reduction with LOS of (E and D). Cycle times have also been lowered for the intersection to 25% as part of the optimum signal timing optimization. In SYNCHRO 11.0, which is better than SIDRA 8.0, the back of the queue has improved at the 14th Ramadan intersection by 33%. However, SYNCHRO has a better representation than SIDRA for current traffic saturation

Traffic Traps: An Investigation into Road Congestion Management

Abstract: Urban traffic congestion presents a significant global challenge, necessitating effective traffic management for seamless transportation system operations. This study emphasizes the implementation of an Intelligent Traffic Management System (ITMS) capable of real-time monitoring and control. Focusing on Mattoor Junction in Ernakulam, Kerala, this research applies distinct algorithms in Python and MATLAB, introducing three key equations: Average Traffic Flow (ATF), Traffic Variability Index (TVI), and Time-of-Day Congestion Index (CI). The methodology involves a detailed survey of the route, traffic volume counts, spot speed studies, and roadside interviews to gather data. The ATF, TVI, and CI equations are used to analyze traffic patterns, variability, and congestion levels. The findings reveal significant congestion on critical routes intersecting at Mattoor Junction, particularly during peak hours. To address this, the study proposes the implementation of an automated traffic signal system, optimizing signal timings. This intervention aims to enhance traffic flow and reduce congestion. The research underscores the potential of ITMS for real-time traffic management, offering a data-driven approach to urban traffic challenges. The integration of theoretical models with empirical data provides a comprehensive framework for future ITMS strategies, contributing to more efficient and adaptive urban traffic management

An adaptive coupled control method based on vehicles platooning for intersection controller and vehicle trajectories in mixed traffic

AbstractConnected and autonomous driving technologies offer a novel solution for intersection control optimization. Connected and autonomous vehicles (CAVs) can access signal plans and optimize trajectories to minimize delays and reduce fuel consumption. However, optimizing trajectories for individual vehicles significantly increases complexity, especially for joint optimization of traffic signals and vehicle trajectories. Given the current technical, regulatory, and policy constraints, a superior intersection management approach is necessary before fully automated driving is achieved. This paper introduces an adaptive coupling control (ACC) method based on vehicle platooning to optimize signal timings and vehicle trajectories in mixed traffic. Initially, vehicle platoon segmentation is conducted, led by CAVs. The study then proposes a single‐layer coupled optimization model based on vehicle platoons, simplifying the joint optimization model. To address logistic constraint difficulties, a linearization of the coupled model (LCM) method is developed. Numerical experiments demonstrate that the ACC method significantly reduces vehicle delay and fuel consumption. At high CAV penetration rates (0.8 < R <1) and high traffic volumes (over 900 pcu/h), vehicle platoon control delivers excellent performance, with delays and fuel consumption even lower than in a fully automated environment (R = 1). This surprising result suggests that the mixed platoon system (ACC method) positively impacts mixed traffic.

Dynamic traffic signal control for heterogeneous traffic conditions using Max Pressure and Reinforcement Learning

Optimization of green signal timing for each phase at a signalized intersection in an urban area is critical for efficacious traffic management and congestion mitigation. Many algorithms are developed, yet very few are for cities in developing nations where traffic is characterized by its heterogeneous nature. While some of the recent studies have explored different variants of Max Pressure (MP) and Reinforcement Learning (RL) for optimizing phase timing, the focus is limited to homogeneous traffic conditions. In developing nations, such as India, control systems, like fixed and actuated, are still predominantly used in practice. Composite Signal Control Strategy (CoSiCoSt) is also employed at a few intersections. However, there is a notable absence of advanced models addressing heterogeneous traffic behavior, which have a great potential to reduce delays and queue lengths. The present study proposes a hybrid algorithm for an adaptive traffic control system for real-world heterogeneous traffic conditions. The proposed algorithm integrates Max Pressure with Reinforcement Learning. The former dynamically determines phase order by performing pressure calculations for each phase. The latter optimizes the phase timings for each phase to minimize delays and queue lengths using the proximal policy optimization algorithm. In contrast to the past RL models, in which the phase timing is determined for all phases at once, in the proposed algorithm, the phase timings are determined after the execution of every phase. To assess the impact, classified traffic volume is extracted from surveillance videos of an intersection in Ludhiana, Punjab and simulated using Simulation of Urban Mobility (SUMO). Traffic volume data is collected over three distinct time periods of the day. The results of the proposed algorithm are compared with benchmark algorithms, such as Actuated, CoSiCoSt, and acyclic & cyclic Max Pressure, Reinforcement Learning-based algorithms. To assess the performance, queue length, delay, and queue dissipation time are considered as key performance indicators. Of actuated and CoSiCoSt, the latter performs better, and thus, the performance of the proposed hybrid algorithm is compared with CoSiCoSt. The proposed algorithm effectively reduces total delay and queue dissipation time in the range of 77.07%–87.66% and 53.95%–62.07%, respectively. Similarly, with respect to the best-performing RL model, the drop in delay and queue dissipation time range from 55.63 to 77.12% and 22.13 to 43.7%, respectively, which is significant at 99% confidence level. The proposed algorithm is deployed on a wireless hardware architecture to confirm the feasibility of real-world implementation. The findings highlight the algorithm’s potential as an efficient solution for queues and delays at signalized intersections, where mixed traffic conditions prevail.

Performance Evaluation of Signalized Intersection- A Case study of Prithivi Chowk, Pokhara

Prithivi Chowk, a heavily trafficked signalized intersection in Pokhara, Nepal, currently relies on manual traffic control, leading to significant issues during peak hours. This study employs the Highway Capacity Manual (HCM) methodology to evaluate the intersection's performance, aiming to address congestion and recommend improvements. Data collected from July 10-12, 2023, during peak hours, indicated traffic volumes of 6369.5 PCU/h in the morning and 6275.5 PCU/h in the evening, demonstrating over-saturation. The analysis included 12 vehicular and 4 pedestrian directions, with peak hour factors of 0.942 and 0.954, respectively.Initial assessments of three lane configurations and signal phasing plans revealed all phase plans exceeded capacity, resulting in a Level of Service (LOS) 'F'. Subsequent evaluations involved geometric enhancements, such as adding lanes. Increasing lanes in the Eastbound Through, Northbound Right Turn, and Westbound Right Turn directions significantly improved performance, achieving LOS 'D' in the third iteration of Phase Plan I. Optimal signal timings were designed using the Webster method, resulting in cycle lengths of 123 seconds for the morning peak and 116 seconds for the evening peak. The study highlights critical challenges and proposes targeted measures to enhance traffic flow at Prithivi Chowk, offering valuable contributions to transportation engineering and urban planning in Nepal. These findings emphasize the need for systematic traffic management improvements to mitigate congestion and enhance intersection performance.

Reducing Two-Way Ranging Variance by Signal-Timing Optimization

Reducing Two-Way Ranging Variance by Signal-Timing Optimization

Research on Intelligent Signal Timing Optimization of Signalized Intersection Based on Deep Reinforcement Learning Using Floating Car Data

Research on Intelligent Signal Timing Optimization of Signalized Intersection Based on Deep Reinforcement Learning Using Floating Car Data

Dynamically Signal Timing Optimization of Isolated Intersection Traffic Lights Based on a Dual-Layer Framework

Dynamically Signal Timing Optimization of Isolated Intersection Traffic Lights Based on a Dual-Layer Framework

Integrated optimization of traffic signal timings and vehicle trajectories considering mandatory lane-changing at isolated intersections

Intersections are the predominant bottlenecks in urban areas due to the intricate conflicts among vehicles with different movements. With the advent of connected and automated vehicles (CAVs), it is more effective to reorganize urban traffic in a coordinated manner, and integrate the planning of both the traffic signal timings and vehicle trajectories. Most existing studies in this field assume that all vehicles are in their intended lanes initially, and only optimize the trajectories in the longitudinal dimension for simplicity, which is ideal and unrealistic. Therefore, this paper considers mandatory lane-changing for the integrated optimization of traffic signal timings and vehicle trajectories at isolated intersections. The entire planning horizon is segmented into a series of time-slots, based on which we select phases and plan the trajectories. First, a single-layer mixed integer programming (MIP) model is formulated to obtain global optimal solutions. Nevertheless, for large-scale cases, the MIP model is not applicable due to its computational complexities. Thus, we regulate vehicles into multi-lane platoons that correspond to green phases to reduce the solution space, and propose a beam-search-based platoon formation planning (BPFP) framework for efficient optimization. A beam search procedure is proposed to select phases for each time-slot, which incorporates a vehicle assignment algorithm to design the platoon formation as a subroutine. The two-dimensional vehicle trajectories are subsequently planned according to the platoon formation profiles. Numerical experiments illustrate that BPFP is capable of acquiring near-optimal solutions and considerably outperforms the baselines, while the computation time is within seconds even in over-saturated scenarios.

Collaborative Optimization of Dynamic Lane Assignment and Signal Timing for Incident-Affected Intersections

Traffic accidents can lead to rapid changes in the traffic supply and demand at urban intersections, thus causing a severe traffic supply/demand imbalance during specific periods. Responding to accidents requires dynamic and accurate adjustments to optimize intersection resources collaboratively and enhance the real-time reliability and stability of traffic flows during such accidents. Currently, research on traffic incidents rarely considers real-time data-based collaborative optimization theories. Therefore, this study, supported by real-time incident detection technology and accident data, first considers the location and intensity of traffic incidents to update dynamically the changes in intersection traffic demand and supply. Subsequently, a dynamically collaborative optimization method is proposed based on lane assignment and signal timings to minimize the sum of variances of the degree of saturation of various approach lanes. Finally, various traffic demand scenarios are set, and the effectiveness of the proposed model is validated based on numerical and sensitivity analyses. The results demonstrate that compared with signal-only optimization and the highway capacity methods (HCM), the collaborative optimization method presented in this study reduces the average vehicular delay percentages by 8.54% and 16.47%, respectively. Sensitivity analysis indicates that, under various detour rates and detour modes, collaborative optimization methods have effectively mitigated the average vehicular delay at upstream intersections to varying degrees. In the context of real-time accident response, collaborative optimization methods demonstrate a capacity to promptly address the urgency of incidents occurring and maintain a sustained reduction in overall delay levels following detours.

A Multi-Objective Optimization Method for Single Intersection Signals Considering Low Emissions

The exponential growth of urban centers has exacerbated the prevalence of traffic-related issues. This surge has amplified the conflict between the escalating need for travel among individuals and the constricted availability of road infrastructure. Consequently, the escalation of traffic accidents and the exacerbation of environmental pollution have emerged as increasingly pressing concerns. Urban road intersections, serving as pivotal junctures for vehicle convergence and dispersal, have remained a focal point for scholarly inquiry regarding enhanced operational efficacy and safety. Concurrently, vehicles navigating intersections are subject to external influences, such as pedestrian crossings and signal controls, causing frequent fluctuations in their operational dynamics. These fluctuations contribute to heightened exhaust emissions, exacerbating air pollution and posing health risks to pedestrians frequenting these intersections. A reasonable signal timing scheme can enable more vehicles to pass through the intersection safely and smoothly and reduce the pollutants generated by transportation. Therefore, optimizing signal timing schemes at intersections to alleviate traffic problems is a topic that needs to be studied urgently. In this paper, the emission model based on specific power is analyzed. Through an analysis of the correlation between specific power distribution intervals and the emission rates of individual pollutants, it has been observed that vehicle emission rates are at their lowest during idle speed, progressively increasing with rising vehicle speeds. Investigation into specific power distribution based on variables, such as vehicle type, frequency of stops, and varying delays, has led to the deduction that the peak specific power of vehicles at intersections consistently occurs within the (0, 1) interval. Furthermore, it has been established that high-saturation intersections exhibit higher peak specific power compared to low-saturation intersections.

Traffic Management using Real-time Density-Based Traffic Light Control System

Abstract: In modern times, cities commonly encounter a big challenge dealing with traffic issues. It's hard to find empty roads nowadays, and waiting at red lights takes forever. The traffic lights are set based on average traffic, but this causes issues at certain spots where traffic suddenly gets heavy. That's why we need a smart system that can handle traffic jams better by looking at how much traffic there is. This system would change the traffic lights in real-time, making things smoother and reducing wait times. In simple terms, we need a clever system to fix the traffic mess in our cities. One of the solution is to manage traffic on signal, traffic signal timing (TST) optimization is one of the fastest and most economical ways to curtail congestion at the intersections and improve traffic flow in the urban network. In this paper we are going to discuss some of the existing traffic light control systems, their drawbacks as well as our proposed system where we are trying to avoid the drawbacks of existing systems. The main objective of our project is to provide a smooth flow of traffic and to reduce the time duration for which one has to stand at the traffic signal. The cameras will monitor the density of vehicles standing at the signal using image processing.This camera takes pictures, and those pictures are analyzed to figure out the density of vehicles in particular lanes. The camera can also recognize sirens and, when it does, it changes the traffic light to green so that emergency vehicles like ambulances and fire trucks can pass through.

Advancing the white phase mobile traffic control paradigm to consider pedestrians

AbstractCurrent literature on joint optimization of intersection signal timing and connected automated vehicle (CAV) trajectory mostly focuses on vehicular movements paying no or little attention to pedestrians. This paper presents a methodology to safely incorporate pedestrians into signalized intersections with CAVs and connected human‐driven vehicles (CHVs). The movements of vehicles are controlled using both traffic lights and mobile CAV controllers during our newly introduced “white phase.” CAVs navigate platoons of CHVs through the intersection when the white phases are active. In addition to optimizing CAV trajectories, the model optimally selects the status of the traffic light signal among white and green indications for vehicular and walk and do‐not‐walk intervals for pedestrian movements. A receding horizon‐based methodology is used to capture the stochastic nature of the problem and to reduce computational complexity. The case study results show the successful operation of fleets consisting of pedestrians, CAVs, and CHVs with various demand levels through isolated intersections. The results also show that increasing the CAV market penetration rate (MPR) can decrease average intersection delay by up to 27%. Moreover, the average pedestrian, CHV, and CAV delays decrease as the CAV MPR increases and reach their minimum values with a fully CAV fleet. In addition, the presence of the white phase can decrease the intersection average delay by up to 14.7%.