Optical Single Sideband Modulation Research Articles

100 Gb/s/λ polarization multiplexing PON downlink based on simplified heterodyne coherent reception

In this work, we experimentally demonstrate a 100Gb/s/λ downstream transmission link for coherent passive optical networks (PONs) up to 50 km, achieving an optical power budget of 29 dB through polarization multiplexing (PolMux) of two 50 Gb/s channels using multiband carrierless amplitude phase modulation (multiCAP) and optical single side band (OSSB) modulation. Additionally, we introduce a separate PolMux 50 Gb/s link that presents an optical power budget of 38.7 dB. Both links have been achieved using a simplified polarization-demultiplexing heterodyne coherent receiver. The robustness of the system is experimentally evaluated by analyzing its response to various input states of polarization. The transmission has been accomplished using 10 GHz electrical bandwidth devices at both the transmission and receiving ends, thereby paving the way for low-cost 100G links suitable for applications such as PONs.

Photonic architecture for remote multi-parameter measurement and transmission of microwave signals

A photonic architecture for remote multi-parameter measurement and transmission of microwave signals is proposed and demonstrated, which utilizes a dual-parallel dual-drive Mach-Zehnder modulator (DP-DDMZM) in the antenna unit and a dual-drive Mach-Zehnder modulator (DDMZM) in the processing unit. Doppler frequency shift (DFS) and angle of arrival (AOA) can be determined by analyzing the down-converted intermediate frequency signals. Introducing a reference signal in the processing unit ensures DFS measurement without directional ambiguity. The proposed architecture can also be applied for instantaneous frequency measurement based on down-conversion. Due to the use of optical single sideband modulation, long-distance transmission of radio frequency (RF) signals without dispersion-induced power fading can be achieved. Experiments for accurate and stable DFS and AOA measurement as well as long-distance RF signal transmission with dispersion-induced power fading are presented. The approach avoids the use of optical filters and polarization-related devices, facilitating wideband and stable operation, which is highly desirable. The proposed architecture is a potential solution for microwave photonic antenna remoting, offering support for both remote transmission and multi-parameter measurement.

Long distance QKD propagation using optical single sideband scheme

Implementation of the passive radio over-fiber technique permits modulating the low-frequency sub-carrier onto an optical channel for dissemination through a light-wave fiber network. Single-sideband modulation for optical signals allows the impressive utilization of channel capacity in optical fiber. Dispersion reduction techniques limit the pulse spreading of a propagated signal in any photonic scheme. To control pulse-spreading effects, the optical single-sideband modulation technique at different phase shifts is modeled, analyzed, and compared to examine the performance of a sub-carrier multiplexing system. Hence, in this paper, a quantum key distribution network using a single sideband modulation technique based on a Li-Nb Mach-Zehnder modulator has been proposed at different electrical phase shifts. In this suggested model, the Optisystem 14.2 simulator is used to analyze the nonlinear characteristics. We have designed a single-sideband contour reduction and amplification with each couplet of 120 km by increasing the distance up to 720 km, and the phase between quantum states is determined. The system performance of the suggested model is investigated and compared based on output power (dBm), quality factor, eye diagram, bit error rate (BER), extinction ratio (ER), and optical spectrum of the received signal by varying link distance (km), channel spacing (nm), input power (dBm), and fiber dispersion (ps/ns/km).

A long-reach radio over free space optics (Ro-FSO) system using hybrid orthogonal frequency division multiplexing (OFDM)-multibeam concept with enhanced detection

Abstract This paper focuses on designing of a 10 Gbit/s-10GHz hybrid Orthogonal frequency division multiplexing (FDM) based Radio over Free Space Optics (Ro-FSO) transmission link using optical single sideband modulation format and its performance has been compared using a different number of transmission beams. The proposed link has been simulated and compared using 1-beam, 2-beam, and 4-beam in the system. We show that by using the 4-beam system in the OFDM-Ro-FSO link, a 3000 m range has been achieved reliably, which a notable improvement when compared to previous work is. Also, we show an improved performance of the system by using an enhanced detection mechanism using a Square root module (SRm) at the receiver side.

Optical carrier-suppressed single sideband modulation based on a thin-film lithium niobate IQ modulator for FMCW ranging application

Optical carrier-suppressed single sideband modulation based on a thin-film lithium niobate IQ modulator for FMCW ranging application

Electro-Optic Modulator With Tunable Multimode Interference Couplers Based on LiNbO$_{3}$ Waveguides and Optical Single-Sideband Modulation

Electro-Optic Modulator With Tunable Multimode Interference Couplers Based on LiNbO$_{3}$ Waveguides and Optical Single-Sideband Modulation

High sideband suppression silicon single sideband modulator integrated with a radio frequency branch line coupler

We demonstrate a single-chip silicon optical single sideband (OSSB) modulator composed of a radio frequency (RF) branch line coupler (BLC) and a silicon dual-parallel Mach–Zehnder modulator (DP-MZM). A co-design between the BLC and the DP-MZM is implemented to improve the sideband suppression ratio (SSR). The modulator has a modulation efficiency of V π L π ∼ 1.75 V · cm and a 3 dB electro-optical (EO) bandwidth of 48.7 GHz. The BLC can generate a pair of RF signals with equal amplitudes and orthogonal phases at the optimal frequency of 21 GHz. We prove through theoretical calculation and experiment that, although the BLC’s performance in terms of power balance and phase orthogonality deteriorates in a wider frequency range, high SSRs can be realized by adjusting relevant bias phases of the DP-MZM. With this technique, the undesired sidebands are completely suppressed below the noise floor in the frequency range from 15 GHz to 30 GHz when the chip operates in the full carrier OSSB (FC-OSSB) mode. In addition, an SSR > 35 dB and an carrier suppression ratio (CSR) > 42 dB are demonstrated at 21 GHz in the suppressed carrier OSSB (SC-OSSB) mode.

A High Performance Silicon Nitride Optical Delay Line With Good Expansibility

In this paper, based on the double strip silicon nitride platform, we designed and fabricated a low loss continuously tunable broadband optical delay line, which contains a 5-bit optical switched delay line and a single tunable optical ring resonator working at “off-resonance”. Optical double sideband modulation link measurement results show it can achieve continuous delay tuning of 395.5 ps and in-band delay fluctuations of about 4 ps and 1 ps were obtained in 8 GHz and 5 GHz working bandwidths, respectively. In addition, the proposed optical delay line has a low on-chip insertion loss of 3 dB and a very low optical loss delay ratio of 0.0022 dB/ps. Moreover, it's delay tuning range can be easily increased by cascading more thermo-optic switches. The delay bandwidth can be expanded by adopting the optical single sideband modulation or increasing the FSR of the optical ring resonator. This integrated tunable optical delay line with good overall performances and expand ability shows great potential for microwave photonic applications.

Optical single-sideband modulation for a coherent Doppler lidar.

The first, to the best of our knowledge, implementation of optical single-sideband modulation (OSSBM) in coherent Doppler lidar (CDL) is demonstrated for use with short pulse widths. It is shown that by providing more bandwidth through a higher intermediate frequency (IF), the OSSBM CDL addresses cross talk between the IF and baseband spectra, reducing spectral distortion. Ultimately, a 4-ns pulse width with a 1-GHz IF is achieved and the effectiveness of the OSSBM CDL is confirmed through velocimetry experiments. This represents a several fold improvement over current fiber-based CDL implementations.

Robust single-sideband-modulated Raman light generation for atom interferometry by FBG-based optical rectangular filtration.

Low-phase-noise and pure-spectrum Raman light is vital for high-precision atom interferometry by two-photon Raman transition. A preferred and prevalent solution for Raman light generation is electro-optic phase modulation. However, phase modulation inherently brings in double sidebands, resulting in residual sideband effects of multiple laser pairs beside Raman light in atom interferometry. Based on a well-designed rectangular fiber Bragg grating and a plain electro-optic modulator, optical single-sideband modulation has been realized at 1560 nm with a stable suppression ratio better than -25 dB despite of intense temperature variations. After optical filtration and frequency doubling, a robust phase-coherent Raman light at 780 nm is generated with a stable SNR of better than -19 dB and facilitates measuring the local gravity successfully. This FBG-based all-fiber single-sideband-modulated Raman light source, proposed for the first time and characterized as robust, compact and low-priced, is practical and potential for field applications of portable atom interferometry.

Photonic Techniques for Generating a Single RF Sideband With No Second Order Sidebands

Two structures that can realise optical single sideband modulation without generating both second order upper and lower sidebands are presented. They are based on a dual-parallel Mach Zehnder modulator (DP-MZM) with an optical filter and a dual-polarisation dual-parallel Mach Zehnder modulator (DPol-DPMZM) with a 90° hybrid coupler. The former is an all-optical structure and hence it has a very wide bandwidth. The latter uses one DP-MZM to realise single sideband suppressed carrier modulation while the other DP-MZM simply passes the optical carrier. It also suppresses the third order sideband on the same side as the wanted fundamental RF modulation sideband. Hence, in an ideal situation, there is no second order harmonic component generated after photodetection. Experimental results are presented for the novel structures, which demonstrate the realisation of optical single sideband modulation without second order sidebands. The results also show large fundamental to second order harmonic power ratio over a wide input RF signal frequency range even after inserting a long single mode fibre into the system for signal transmission. The new optical single sideband modulators find applications in improving the multioctave spurious free dynamic range in a long-haul fibre optic link and reducing measurement errors in an optical vector analyser.

A linearized optical single-sideband modulation RoF link with tunable optical carrier-to-sideband ratio

In this paper, an optical single-sideband (OSSB) modulation radio over fiber (RoF) link with tunable optical carrier-to-side-band ratio (OCSR) and simultaneous third-order intermodulation distortion (IMD3) and power fading suppression is proposed. In the proposed link, a phase-modulated signal and an optical carrier are polarization multiplexed using a Sagnac loop. The periodic power fading caused by chromatic dispersion is avoided by filtering the lower sideband. By adjusting the polarization state, the IMD3 is suppressed and a tunable OCSR can be achieved. Compared with the traditional Mach–Zehnder modulator (MZM) based link, the spurious free dynamic range (SFDR) of the proposed link is improved by more than 18 dB with different RF frequencies. In the broadband characteristic test, the proposed link exhibits lower error vector amplitude (EVM) and higher adjacent channel power ratio (ACPR) in a larger input RF power range.

Analysis of Optical Single Sideband Modulators for Radio Over Fiber Link with and without Second Order Sidebands

The analysis of Optical Single Sideband (OSSB) generation with and without second-order sidebands for Radio over Fiber (RoF) is presented. The performance of systems based on hybrid coupler with distinct phase angle and Dual-Parallel Dual-Drive Mach-Zehnder Modulator (DP-DDMZM) is compared using simulation. Impact of parameters like Single-Mode Fiber (SMF) length, Radiofrequency (RF) amplitude, and laser linewidth on Signal-to-Noise Ratio (SNR) has been investigated. It has been observed that eliminating one of the second-order sidebands with 120° hybrid coupler improves peak SNR in comparison to 90° hybrid coupler with both second-order sidebands and DP-DDMZM-based system without second-order sidebands irrespective of Continuous Wave (CW) laser linewidth.

High Modulation Efficiency and Dynamic Range Optical Single Sideband Modulation Without Gain Penalty in Nonlinear Distortion Suppression

The optical single sideband (OSSB) modulation with tunable optical carrier to sideband ratio (OCSR) is a promising and popular technique in wideband analog signal transmission and microwave signal processing, which can improve modulation efficiency and combat the fiber chromatic dispersion. However, in all reported schemes for achieving OSSB modulation with tunable OCSR, the spurious free dynamic ranges (SFDR) of the systems are all limited by the third-order intermodulation distortion (IMD3). In this paper, our object is to improve the SFDR and suppress the IMD3 in a novel OSSB modulation with tunable OCSR. The proposed system consists of a primary channel and a secondary channel. In primary channel, an OSSB modulation with tunable OCSR is implemented. In secondary channel, the optical carrier and first-order sidebands are perfectly cancelled out, which can suppress the IMD3 without gain penalty at the same received optical power. In this way, a large-SFDR OSSB modulation with tunable OCSR is realized. Experimental results exhibit that the IMD3 gets effective cancellations without gain penalty under unchanged total received power, and the output microwave signal power obtains about 11-dB improvement by optimizing the OCSR. A greatly increased SFDR of over 128 dBHz4/5 is achieved in the proposed system.

Performance Analysis Of Optical Modulation Techniques Based On Reduction Of Second Order Harmonics And Chromatic Dispersion on OFDM Signals

ABSTRACT This work explains the theoretical and mathematical investigations of the transmission performance of an optical Single Sideband (SSB) modulation technique generated by a Mach Zehnder Modulator (MZM) with a 90° and 120° phase shift using hybrid coupler (Modified SSB) in addition to the Vestigial Sideband technique (VSB). The problem addressed in this paper is the effect of non-linearity of the transmitter system and the chromatic dispersion in single mode fiber due to the presence of second- and higher order harmonics. The non-linearity of the transmitter generates second and higher order harmonics, which affects the system performance leading to reduction in the data rate and increased distortion. The transmission performance of SSB, M-SSB and VSB is evaluated based on the extinction ratio of the MZM, different transmission lengths of the fiber, optical signal modulation index and the receiver sensitivity. A mathematical model has been developed for all the systems representing the modulation techniques till the second order. The baseband modulation consists of an RF signal of frequency 18 GHz and an Orthogonal Frequency Division Multiplexing (OFDM) signal with 4-QAM modulation technique converted to optical signal, using the MZM and transmitted over a SMF of distance of 75 Km. Our results show that the M-SSB technique proves to be more immune toward transmitter nonlinearity and chromatic dispersion as compared to its counterparts. In addition to this, it improves the receiver sensitivity by 6.56 dBm. The results generated by software simulation are in tandem with the mathematical model.

Performance optimization of RSOA based mm-wave radio-over-fibre access network

In this paper, a Reflective Semiconductor Optical Amplifier based, Radio-over-Fibre access network configuration has been proposed to feed future millimeter-wave radio systems. The system architecture combines several approaches to overcome the challenges of millimeter-wave signal transmission. Reflective semiconductor optical amplifier modulator realizes a colorless and relatively cost-effective Remote Antenna Unit. The same optical carrier is used for both downlink and uplink. Optical single-sideband modulation is used at the downlink, which is robust against chromatic dispersion, but the complex realization of this modulation format is not possible at the Remote Antenna Unit. Optical intermediate frequency transmission is applied at the uplink direction, and the required local oscillator signal originates from the central station. The critical element is the reflective optical amplifier, as it compensates for the optical loss and works as an external intensity modulator. The operation of the reflective optical amplifier is modeled by multisection rate and wave equation-based description. The amplification and modulation behaviors of an available reflective optical amplifier are also measured. The experimental work validated the colorless operation and the quality of the modulation versus bias current and input optical power. Finally, system simulation was realized. The uplink and downlink power budgets were balanced, and optimal values for the optical coupling rate and RSOA bias current have been selected.

A novel bidirectional RoF link with compensated SBS and RB for 16-QAM OFDM based mm-wave downlink and uplink vector signal generation and transmission on a single fiber

A novel bidirectional RoF link with compensated SBS and RB for 60 GHz OFDM-based 16-QAM downlink and uplink vector signal generation and co-propagation over a single fiber is proposed. At the central station (CS), 60 GHz optical mm-wave is generated and modulated in the optical single-sideband modulation (OSSB) technique by the 16-QAM OFDM downlink vector signal. At the base station (BS), the 60 GHz downlink signal is detected by a high-speed photodetector (PD). The 60 GHz electrical mm-wave signal is transmitted to the user end by an antenna. The uplink carrier is extracted from the unmodulated sideband of the mm-wave downlink vector signal. This reduces the complexity of BS and makes it free from the laser source. The 16-QAM OFDM-based mm-wave uplink signal is received from the user end through an antenna and down-converted to a 10 GHz uplink vector signal. The uplink signal modulates the extracted blank carrier in the OSSB technique. The uplink and downlink vector signals are co-propagated through the standard single bidirectional fiber. Although the carrier reuse over a single fiber reduces the fiber capacity by half, it generates non-linear backscattering such as Rayleigh Backscattering (RB) and Stimulated Brillouin Scattering (SBS). A theoretical analysis is made on the backscattered power and its effect on the fiber transmission. The compensation of SBS by maintaining the SBS threshold and mitigation of RB is carried out by appropriate modulation technique. In addition, downlink and uplink signal with different data rate is transmitted through the compensated bidirectional RoF link, and the transmission performance is analyzed. Based on the analysis, the theoretical model for simultaneous downlink and uplink signal transmission over a single fiber is proposed and verified by the software simulation. The compensated bidirectional RoF link shows up a better performance up to 75 km with negligible power penalty.

Wideband Doppler frequency shift measurement and direction discrimination based on optical single sideband modulation with a fixed low-frequency reference signal

A wideband Doppler frequency shift (DFS) measurement and direction discrimination method based on optical single sideband (OSSB) modulation with a fixed low-frequency reference signal is proposed and experimentally demonstrated. In the proposed approach, the transmitted signal and the fixed low-frequency reference signal are applied to the lower and upper Mach–Zehnder modulators (MZMs) of a dual-drive dual-parallel MZM (DD-DPMZM) respectively, for realizing OSSB modulation independently. The echo signal is applied to a conventional MZM for optical double sideband (ODSB) modulation. A low-speed photodetector (PD) is used to implement optical-to-electrical conversion and generate three low-frequency beating signals. Both the value and direction of the DFS can be simply obtained by analyzing the frequencies of the three low-frequency beating signals. The proposed scheme has a simple structure, a wideband operating frequency range, and a low requirement of the receiving circuit. Experiments demonstrate that wideband DFS measurement and direction discrimination within 5∼18 GHz with a measurement error of less than ±0.06 Hz are achieved by using a 20 MHz reference signal.

A photonic transmission link with enhanced dynamic range by incorporating phase shifters in dual drive dual parallel Mach–Zehnder modulator

Abstract A linearization scheme is proposed for microwave photonic link to enlarge spurious free dynamic range using a dual-electrode dual parallel Mach–Zehnder modulator (MZM). This scheme employs phase control method to improve performance of the link by adjusting phase of radio frequency (RF) signals and bias voltages of optical modulator. Optical single sideband modulation is achieved through sub-modulators of dual parallel MZM which increases efficiency of the link. The simulated results show that third order intermodulation distortion is suppressed by 28 dB when the input RF signals are 9.1 and 9.5 GHz and noise floor is at −161 dBm/Hz. The spurious free dynamic range is also improved by 12.6 dB.

QAM Vector mm-Wave Signal Generation Based on Optical Orthogonal Polarization SSB Scheme By a Single Modulator

Millimeter-wave (mm-wave) has become an attractive technique in the fifth generation (5G) because it meets the demand of explosive increase in data traffic. In this study, we propose and demonstrate the generation of quadrature amplitude modulated (QAM) vector mm-wave signal employing optical orthogonal polarization single sideband (SSB) modulation, which employs a single polarization-division multiplexing MachZehnder modulator (PDM-MZM). Based on our scheme, there is no inter-band crosstalk and inter-polarization signal-signal beat interference (SSBI). In our scheme, the two sub-modulators in PDM-MZM both work within their linear modulation range. After PDM-MZM, the two optical SSB signals are orthogonally polarized. By using an interleaver (IL), the low sideband (LSB) and upper sideband (USB) optical signals in the two polarization directions are extracted respectively. In addition, IL also suppresses the unwanted components of the opposite orthogonally polarized signal. We demonstrate the generation of two independent 28 GHz 12 Gbaud quadrature-phase-shift-keying (QPSK) and 6 Gbaud 16-ary quadrature amplitude modulation (16-QAM) signals. 65 km single-mode fiber (SMF) transmission is achieved with the bit-error-rate (BER) below 20% forward-error-correction (FEC) soft-decision threshold of 2.4 102 without dispersion compensation. We also demonstrate the generation of two independent 28GHz 1 Gbaud 64-QAM signals and transmission SMF over 10-km with the BER below 20% FEC soft-decision threshold of 2.4 102. Since the LSB and USB signals are on opposite polarization sides, the inter-band crosstalk and the inter-polarization SSBI can be significantly reduced. Because SSB modulation scheme is deployed, our proposed QAM vector signal generation system is robust to fiber dispersion.