One-step Strip Research Articles

Anti-corrosive properties of vermiculite-enhanced waterborne epoxy resins with two-dimensional exfoliation

Abstract Although waterborne epoxy resin coatings are widely used in the field of anti-corrosion, micropores and micro defects in their coatings are the key factors restricting their further development. The exfoliated vermiculite was stripped by a physical one-step stripping method, with good water dispersion and dense lamellar structure. As the nano-filler, it can effectively fill the micro defects in the coating, make the coating structure more compact, and effectively prevent the intrusion of corrosive media. When exfoliated vermiculite was added at 1%, two orders of magnitude increased the electrochemical impedance modulus to 2.276×106 Ω cm2 and the corrosion current was correspondingly reduced to 1.186×10−8 A cm−2, showing excellent corrosion resistance. Adding 1% exfoliated vermiculite creates a “labyrinth effect” in the coating that extends the penetration path of the corrosion particles, thus effectively preventing corrosion of the underlying metal substrate. This enables the coating to better cope with harsh corrosive environments and provides a viable idea for coating protection.

Recovery of Vanadium from Carbonated Solution by Extraction with Transformed Aliquat 336 and Stripping-Precipitation

ABSTRACT The leaching solution from the direct reduction-sodium smelting process of ultra-poor vanadium-bearing titanomagnetite contained sodium, vanadium, and impurities. It was carbonated to ensure sodium recovery, and the recovery of vanadium proved challenging. This study proposed and optimized a novel process of extracting vanadium from this alkaline carbonated solution using the transformed organic phase of 20 vol% (0.44 mol/L) Aliquat 336, 8 vol% 2-octanol, and 72 vol% sulfonated kerosene. To achieve superior vanadium extraction, Aliquat 336 in the organic phase was transformed into carbonate type by successively washing with NaHCO3 and NaOH solutions. The single-stage extraction efficiency of vanadium exceeded 85% at a pH of 8.0‒9.0 and an organic-to-aqueous phase ratio of 1:1. The thermodynamics of the vanadium extraction process was examined, confirming that the extraction process is an exothermic reaction (ΔH 0 = −9.56 kJ/mol). Furthermore, using a solution of 4 mol/L NH4Cl and 1 mol/L NH4OH with a pH of 8.8 as the effective stripping reagent to realize one-step stripping and precipitation of vanadium, the single-stage stripping efficiency of vanadium was 99.8%, and the precipitation efficiency was about 95%. Through this stripping-precipitation process, solid ammonium metavanadate with a purity of 98.14% was obtained in one step. The mechanisms of transformation, extraction, and stripping were studied via infrared spectra of the organic phases.

Highly selective extraction of Pd(II) using functionalized molecule of 2-[(2-ethylhexyl)thio]benzoxazole and its Pd(II) extraction mechanism

• A functionalized extractant EHBXS with three heteroatoms (S, N and O atoms) which can selectively coordinated with Pd(II) was synthesized by one-step reaction. • EHBXS has high selectivity for Pd(II) and can effectively remove Pd(II) from multi-metal solution at desired extraction conditions. • The coordination mechanism between Pd(II) and EHBXS was proved by slope method, FT-IR, 1 H NMR, 13 C NMR spectroscopies, and the X-ray crystal structure of Pd(EHBXS) 2 Cl 2 . In view of the separation and recycling of Pd(II) from multi-metal aqueous solution, a functionalized extractant of 2-[(2-ethylhexyl)thio]benzoxazole (EHBXS) with excellent selectivity for Pd(II) was synthesized and used to extract Pd(II) for the first time. The effects of EHBXS concentration, HCl concentration, organic/aqueous (O/A) phase ratio, contact time, and regeneration of EHBXS were investigated in detail. The extraction efficiency of Pd(II) was almost 100 % while the co-extraction efficiencies of Pt(IV), Rh(III), Cu(II), Fe(III) and Ni(II) existed in the aqueous solution were less than 10 %, which indicates that EHBXS is an effective extractant and can effectively remove Pd(II) from other metals at desired extraction conditions. Thiourea ((NH 2 ) 2 CS) solution (1.0 mol/L) could be used as an effective Pd(II) stripping agent and the one-step stripping efficiency of Pd(II) was higher than 98 %. EHBXS has excellent regeneration ability and the extraction efficiency of Pd(II) with regenerated EHBXS reaches to 87% even after 7 cycles. Moreover, the coordination mechanism between EHBXS and Pd(II) has been proven via the slope method, FT-IR spectra, 1 H NMR, 13 C NMR and single X-ray diffraction. Pd(II) and EHBXS formed a 1:2 complex of Pd(EHBXS) 2 Cl 2 during extraction. Pd(II) was coordinated with two Cl atoms and two EHBXS, and thus formed Pd(EHBXS) 2 Cl 2 molecule, in which EHBXS was coordinated with Pd(II) via the N atom in the benzoxazole ring as neutral unidentate ligand.

Nanoplasmonic biochips for rapid label-free detection of imidacloprid pesticides with a smartphone.

The widespread and intensive use of neonicotinoid insecticides induces negative cascading effects on ecosystems. It is desirable to develop a portable sensitive sensing platform for on-site screening of high-risk pesticides. We combined an indirect competitive immunoassay, highly sensitive surface plasmon resonance (SPR) biochip and a simple portable imaging setup for label-free detection of imidacloprid pesticides. The SPR biochip consists of several capped nanoslit arrays with different periods which form a spectral image on the chip. The qualitative and semiquantitative analyses of pesticides can be directly observed from the spot shift on the chip. The precise semiquantitative analyses can be further completed by using image processing in a smartphone. We demonstrate simultaneous detection of four different concentrations of imidacloprid pesticides. The visual detection limit is about 1ppb, which is well below the maximum residue concentration permitted by law (20ppb). Compared to the one-step strip assay, the proposed chip is capable of performing semiquantitative analyses and multiple detection. Compared to the enzyme-linked immunosorbent assay, our method is label-free and requires simple washing steps and short reaction time. In addition, the label-free chip has a comparable sensitivity but wider working range than those labeling techniques.

Cephalexin Residue Detection in Milk and Beef by ELISA and Colloidal Gold Based One-Step Strip Assay

An evaluation of a rapid enzyme-linked immunosorbent assay (ELISA) and colloidal gold based one-step strip assay for cephalexin (CEX) residue detection in milk and beef is described. A monoclonal antibody (mAb) against CEX was produced using cephalexin-bovine serum albumin (CEX-BSA) conjugate as the immunogen, which exhibited no cross-reactivity with applied chemicals in the studied concentration range. The detection limit of rapid ELISA was calculated as 0.39 microg/kg in PBS and 19.5 microg/kg in beef and milk, which was quite lower than the European Union Maximum Residue Limit (MRL) of 100 microg/kg in milk and 200 microg/kg in muscle. Spiked samples were detected with a mean recovery of 82.8-124% and coefficient of variation of 4.88-25%, which indicated a good agreement with the spiked concentration. Accuracy and reproducibility were determined using spiked samples with four different final concentrations of 1, 2, 5, and 10 microg/kg of CEX (n = 7). Mean intra-assay variation of 6.67% and inter-assay variation of 10.66% were obtained. In contrast, the strip test for CEX had a visual detection limit of 0.5 microg/kg, which could be evaluated within 3-10 min. However, positive samples should be further quantified by more sensitive and accurate competitive indirect ELISA method. In conclusion, the described strip test is rapid, simple, and cost-effective as well as sensitive and specific enough for reliable and accurate on-site screening.

Gold immunochromatographic assay for simultaneous detection of carbofuran and triazophos in water samples

Using a simple test for rapid identification and quantification of pesticide multiresidues in food and environmental samples is a long-cherished approach for practical monitoring purposes. Here two gold-based lateral-flow strips (strip A and strip B) were investigated for simultaneous detection of carbofuran and triazophos. For the strip A format, a bispecific monoclonal antibody (BsMcAb) against both carbofuran and triazophos was employed to prepare the immunogold probe. For the strip B format, anti-carbofuran monoclonal antibody (McAb) and anti-triazophos McAb separately labeled with colloidal gold were combined as detector reagents. By comparison of visual results from pesticide standard tests between the two formats, the strip B assay manifested higher sensitivities for both pesticides. Analysis of spiked water samples by the preferable strip indicated that the detection limits for carbofuran and triazophos were 32 and 4 μg/L, respectively. The strength of the portable one-step strip assay was in the simultaneous screening for two pesticides within a short time (8–10 min) without any equipment.

Optimization of Nickel Salicide Strip Process Using Taguchi Method

A one-step strip scheme of NiPt salicide has been developed to replace an existing two-step strip scheme for better throughput and defects. Taguchi method was utilized to fine-tune three key process factors including thickness of nickel, temperature and duration of the NiSi RTP-1. Optimization was obtained considering the complicated salicide formation such as crystalline structure, dopant type, and dimension of Si. Using signal-to-noise ratio analysis, ANOVA, and multi-objectives compromise, an optimal process was achieved with significant improvements in resistance shift, resistance uniformity, salicide surface roughness, and reverse linewidth effect.

Development of a one-step strip for the detection of triazophos residues in environmental samples

Environmental and food safety issues now are recognized internationally, and pesticide residues play key roles as environment and food pollutants. It is crucial to develop methods for rapid determination of pesticide residues in environments and foods. A one-step strip based on nanocolloidal-gold-labeled monoclonal antibodies for detection of triazophos residue was developed. The nanocolloidal gold, with an average particle diameter of 25 nm (G25), was labeled to an antitriazophos monoclonal antibody. This conjugate was dispensed on the conjugate pad of a porous glass fiber. Ovalbumin hapten and goat anti-mouse IgG were dispensed on the nitrocellulose membrane and served as the test line (T-line) and control line (C-line), respectively. After conditions optimization, the one-step strip was finally developed for the residue determination of triazophos. The limit of detection (LOD) of the strip was 4 ng/mL for standard. The detection was not affected by the pH of the liquid sample but low total ion concentration will induce illegible C-line and T-line. The LOD for spiked samples of soil and water was 5 ng/mL, with run time of no more than 10 min.

Development of an immunochromatographic assay for the rapid detection of bromoxynil in water

A rapid immunochromatographic one-step strip test was developed to specifically determine bromoxynil in surface and drinking water by competitive inhibition with the nano colloidal gold-conjugated monoclonal antibody (mAb). Bromoxynil standard samples of 0.01-10 mg L(-1) in water were tested by this method and the visual limit was 0.06 mg L(-1). The assay only required 5 min and one-step by dispensing a drop of sample solution onto a strip. Parallel analysis of water samples with bromoxynil showed comparable results from one-step strip test and ELISA. Therefore, the one-step strip test is very useful as a screening method for qualitative detection of bromoxynil in water.

Development of a One-Step Strip Test for the Diagnosis of Chicken Infectious Bursal Disease

A rapid diagnostic strip for chicken infectious bursal disease (IBD) was developed based on membrane chromatography using high-affinity monoclonal antibodies directed to chicken infectious bursal disease virus (IBDV). The diagnostic strip has high specificity for detection of chicken IBDV antigen and recognizes a variety of the virus isolates, including virulent and attenuated strains, with no cross-reactivity to other viruses, such as Newcastle disease virus, Marek's disease virus, infectious bronchitis virus, infectious laryngotracheitis virus, and egg-drop-syndrome virus. The results showed that its specificity was highly consistent with the agar-gel precipitation test (AGP). The diagnostic strip detected as low as 800 median egg lethal dose (ELD50) viruses in the IBDV BC6/85-infected sample, which was comparable with AC-ELISA (400 ELD50) and 32 times more sensitive than the AGP test (2.56 x 10(4) ELD50). In experimental infection, IBDV was detected in the bursa as early as 36 hr postinfection with the diagnostic strip before the clinical signs and gross lesions appeared. It takes only 1-2 min to do a strip test to detect chicken IBDV antigen after the specimen is grounded in a whirl pack with finger massage.

Nanocolloidal Gold-Based Immunoassay for the Detection of the N-Methylcarbamate Pesticide Carbofuran

Nanocolloidal gold particles were prepared and labeled to an anti-carbofuran monoclonal antibody (Mab). This conjugate was dispensed on the conjugated pad of a porous glass fiber. Ovalbumin (OVA)-carbofuran and goat anti-mouse IgG were dispensed on the nitrocellulose (NC) membrane and served as the test line and control line, respectively. The carbofuran-containing sample migrated to the NC membrane and reacted with the anti-carbofuran Mab labeled with the colloidal gold. The mixture diffused along the membrane and passed through the OVA-carbofuran in the test line via capillary action. The more analyte present in the sample, the more effectively it will compete with the carbofuran immobilized on the test line for binding to the limited amount of antibody labeled with colloidal gold. An adequate amount of carbofuran could prevent attachment of the colored conjugate to the test line. The presence or absence of a colored band on the test line could indicate a negative or positive result, respectively. When measured to the water sample spiked with carbofuran, this was obtained at or above 0.25 mg/L of carbofuran. The major advantages of the one-step strip test are that the detection time needed was <10 min and all of the reagents are included in the test device.

Liposome Dehydration on Nitrocellulose and Its Application in a Biotin Immunoassay

The feasibility of utilizing dehydrated liposomes in the development of a simple immunoassay device for point-of-care diagnostics or field assays was demonstrated. The recovery of liposomes after a cycle of dehydration and rehydration was studied using biotin-tagged, dye-loaded liposomes with antibiotin antibodies immobilized in a defined zone on nitrocellulose strips. Liposomes were vacuum-dehydrated on the strip at a location below the antibiotin zone. The strip was placed in a tube containing a carrier solution and capillary action brought the solution to the dehydrated liposomes, rehydrated them, and caused them to migrate to the antibody zone where intact liposomes were captured and measured optically. High concentrations of either trehalose or sucrose external to the liposomes and both polyvinylpyrrolidone and gelatin in the membane blocking reagent were essential for preservation of the dehydrated/rehydrated liposomes on nitrocellulose. Between 70 and 80% of the liposomes were recovered on the nitrocellulose strips after a cycle of dehydration and rehydration. The dehydrated liposomes on the strips were stable for at least 1 year when stored in vacuum-sealed plastic bags at 4°C. The technique was successfully applied to the development of a rapid one-step strip immunoassay for biotin.