One-pot Multicomponent Approach Research Articles

One-pot multicomponent approach towards the synthesis of 5-substituted 1H-tetrazoles using lanthanum (III) nitrate hexahydrate as a catalyst

One-pot multicomponent approach towards the synthesis of 5-substituted 1H-tetrazoles using lanthanum (III) nitrate hexahydrate as a catalyst

Green Synthesis of 2-isonicotinoyl-4,6-dihydroimidazo[4,5-c] Pyrazol-5 (2H)-one Derivatives via One-pot Multicomponent Approach as a Potent Antifungal Agent

Green Synthesis of 2-isonicotinoyl-4,6-dihydroimidazo[4,5-c] Pyrazol-5 (2H)-one Derivatives via One-pot Multicomponent Approach as a Potent Antifungal Agent

Dicyanopyridine derivatives: One-pot preparation, ACQ-to-AIE transformation, light-conversion quality and photostability

Low cost and strong fluorescence emission are two important guarantees for luminogens used as light conversion agents. By one-pot multicomponent approach and inexpensive starting materials, three dicyanopyridine (DP) derivatives named as DCP (2-amino-6-methoxy-4-phenylpyridine-3,5-dicarbonitrile), DCO (2-amino-6-methoxy-4-(4-methoxyphenyl) pyridine-3,5-dicarbonitrile) and DCC (2-amino-4-(4-cyanophenyl)-6-methoxypyridine-3,5-dicarbonitrile) were designed and synthesized.Meanwhile, the ACQ-to-AIE transformation was successfully realized by altering substituent groups rather than traditional rotor–stator theory. Based on crystal analysis and theoretical calculations, the ACQ-to-AIE transformation is attributed to the tunable stacking modes and intermolecular weak interactions. Owing to matched fluorescence emission, low lost, high yield, and AIE activity, DCC is used as light conversion agents and doped in EVA matrix. The light conversion quality confirms that DCC can not only convert ultraviolet light, but also significantly improve the transmittance of 25 %/40 % EVA, whose photosynthetic photon flux density at 400–500 nm and 600–700 nm increased to 30.67 %/30.21 % and 25.37 %/37.82 % of the blank film, respectively. After 20 h of UV irradiation (365 nm, 40 W), the fluorescence intensities of DCC films can maintain 92 % of the initial values, indicating good photostability in the doping films. This work not only provides an excellent and low-cost light conversion agent, but also has important significance for ACQ-to-AIE transformation of luminogens.

Greener Approach for Synthesis of δ-MnO2 Nanoparticles: Access to Pharmaceutically Important Pyrimidines and their Antimicrobial Activity Studies.

A sustainable approach for pharmaceutically important pyrimidine derivatives is achieved by using biogenically produced single-phase δ-MnO2 NPs under external ligand-free conditions. The phytochemicals that comprise the extract of Areca Nut Husk (ANH) have been discovered to serve as reducing agents. The role of phytochemicals is not only to aid in the reduction of Mn(VII) into Mn(IV), but they also have an important role in stabilizing the catalyst. The establishment of δ-MnO2 NPs was confirmed inveterate by FE-SEM, p-XRD, ICP-OES (Mn content = 43.17% w/w), EDX, and with an active Mn content of 43.17% w/w. A series of pyrimidine derivatives were prepared in good yields using a one-pot multicomponent synthesis approach under atmospheric conditions. In addition, hot filtration tests, control experiments, gram-scale synthesis, and mechanistic investigations were demonstrated. Additionally, antimicrobial activity studies of δ-MnO2 NPs and pyrimidine derivatives against the Gram-negative bacteria E. coli, growth curve and minimum inhibitory concentration were studied.

An efficient one-pot and simple multicomponent approach to the synthesis of highly functionalized furans containing dialkyl phenol.

In this study, arylglyoxals, acetylacetone, and 2,6-dimethyl phenol or 2,6-di-tert-butyl phenol are combined to efficiently synthesize a series of 1-(4-(3,5-dialkylphenyl)-2-methyl-5-phenylfuran-3-yl) ethan-1-one derivatives in excellent yields. These reactions were carried out in acetone at reflux under catalyst-free conditions in the presence of triethylamine as a base for 3 h. NMR, FT-IR, EI-MS, and elemental studies were used to characterize the products' structural characteristics. The present study has also several benefits, such as excellent yields and the ease of workup procedure, making it an appealing, practical, and acceptable one-pot method for producing functionalized derivatives of dialkyl furan.

One flask cascade approach to a complex pyrano[2,3-c]pyrazole-pyrazolone hybrid heterocyclic system and its initiatory neurobiological profiling.

A one-pot multicomponent approach towards a hybrid heterocyclic pyrano[2,3-c]pyrazole-pyrazolone framework involving tandem Knoevenagel condensation, sequential intermolecular 1,6-Michael addition, and 6-endo dig cyclization between diynones and pyrazolones, mediated by DBU, has been discovered. This process embodies several green and sustainable chemistry features. Preliminary bioactivity profiling of the new chemical entities indicates neuroprotective and AChE inhibitory activities.

A photoinduced multicomponent intramolecular cyclization/hydroxytrifluoromethylation cascade: facile access to polyfunctionalized 3,4-dihydroquinazolinones

Herein, we report a modular assembly of CF3-modified 3,4-dihydroquinazolinones from basic building blocks using a one-pot light-driven multicomponent approach.

Synthesis, Characterization, and Catalytic Application of SnP2O7 for the Highly Efficient Synthesis of Xanthene Derivatives

This study introduces a mono-ammonium phosphate-based heterogeneous catalyst that possesses characteristics of simplicity, reusability, and recoverability, making it well-suited for multicomponent reactions. The prepared catalyst underwent comprehensive characterization using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) patterns, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). Employing this catalyst in a one-pot multicomponent approach, it becomes possible to synthesize xanthene derivatives efficiently. The results showcase the impressive performance of the novel SnP2O7, which acts as a heterogeneous catalyst in traditional reactions, leading to the desired products with yields ranging from good to excellent and within a short reaction time. Notably, SnP2O7 exhibits remarkable stability in its catalytic activity, enabling its use for up to five cycles without experiencing a significant decrease in yield.

Antifungal activity of novel azetidine tethered chitosan synthesized via multicomponent reaction approach.

The increasing incidences of fungal infections among Covid-19 infected patients is a global public concern and urgently demands novel antifungals. Biopolymers like chitosan hold unique structural properties and thus can be utilized in the synthesis of biologically important scaffolds. To address the current scenario, the author's synthesized novel chitosan-azetidine derivative by adopting one-pot multicomponent reaction approach. The influence of chemical modification on the structural characteristics was investigated by means of spectroscopic techniques viz. FT-IR and 1HNMR and elemental analysis. Additionally, the authors investigated the antifungal potential of chitosan-azetidine derivative against Aspergillus fumigatus 3007 and the results indicated higher antifungal effect with an antifungal inhibitory index of 26.19%. The SEM and confocal microscopy images also reflected a significant inhibitory effect on the morphology of fungal mycelia, thus reflecting the potential of synthesized chitosan-azetidine derivativeas a potential antifungal agent.

New class of fused [3,2-b][1,2,4]triazolothiazoles for targeting glioma in vitro

Glioma is aggressive malignant tumor with limited therapeutic interventions. Herein we report the synthesis of fused bicyclic 1,2,4-triazolothiazoles by a one-pot multi-component approach and their activity against C6 rat and LN18 human glioma cell lines. The target compounds 2-(6-phenylthiazolo[3,2–b][1,2,4]triazol-2-yl) isoindoline-1,3-diones and (E)-1-phenyl-N-(6-phenylthiazolo[3,2–b][1,2,4]triazol-2-yl) methanimines were obtained by the reaction of 5-amino-4H-1,2,4-triazole-3-thiol with substituted phenacyl bromide, phthalic anhydride, and different aromatic aldehydes in EtOH/HCl under reflux conditions. In C6 rat glioma cell lines, compounds 4g and 6i showed good cytotoxic activity with IC50 values of 8.09 and 8.74 μM, respectively, resulting in G1 and G2-M phase arrest of the cell cycle and activation of apoptosis by modulating phosphorylation of ERK and AKT pathway.

Effective Synthesis and Biological Evaluation of Functionalized 2,3-Dihydrofuro[3,2-c]coumarins via an Imidazole-Catalyzed Green Multicomponent Approach.

For the first time, an eco-friendly and efficient one-pot green multicomponent approach has been described to synthesize functionalized trans-2,3-dihydrofuro[3,2-c]coumarins (DHFCs). In this synthesis, imidazole and water were used as the catalyst and solvent, respectively, under mild conditions. Applications of the developed catalytic process in a water medium revealed the outstanding activity, productivity, and broad functional group tolerance, affording a series of newly designed DHFC and derivatives in excellent yields (72–98%). Moreover, the human serum albumin (HSA) binding ability of the synthesized DHFC derivatives has been uncovered through the detailed in silico and in vitro-based structure-activity analysis. The ability to bind HSA, the most abundant serum protein, in the low micromolar ranges unequivocally reflects the suitable absorption, distribution, metabolism, and elimination profile of the synthesized compounds, which may further be envisaged for their therapeutic usage endeavors.

Deep Eutectic Solvent (DES)-Mediated One-Pot Multicomponent Green Approach for Naphthalimide-Centered Acridine-1,8-dione Derivatives and Their Photophysical Properties.

An efficient and green methodology to assemble various functionalized naphthalimide-centered acridine-1,8-dione derivatives involving a one-pot multicomponent protocol has successfully been developed. Herein, a variety of aromatic aldehydes, 1,3-diketones, 1,8-naphthanoic anhydride, and hydrazine hydrate have been condensed under a reusable, inexpensive, and biodegradable deep eutectic solvent (DES) of N,N′-dimethyl urea and l-(+)-tartaric acid to obtain the desired targets under operationally mild reaction conditions with outstanding conversions. Strikingly, in this strategy, the DES plays a dual role of a catalyst and solvent and was recycled efficiently in four consecutive runs with no substantial drop in the yield of the desired product. Interestingly, the easy recovery and high reusability of the DES make this simple yet efficient protocol environmentally desirable. Moreover, the preliminary photophysical properties of thus-prepared valuable molecules have also been investigated by ultraviolet–visible (UV–vis) and fluorescence spectroscopy.

Concise One-Pot Multicomponent Reaction Approach to Mono­fluo­rinated Spiro-pyrazole-pyridine Derivatives without Additional Catalyst

AbstractMonofluorinated bis-heterocyclic spirocycles: functionalized ethyl 9-fluoro-8-methyl-1,4-dioxo-2,3,6,10-tetraphenyl-2,3,7-triazaspiro[4.5]dec-7-ene-9-carboxylate derivatives were efficiently synthesized from readily available 1,2-diphenylpyrazolidine-3,5-dione, ethyl 2-fluoroacetoacetate, aromatic aldehydes, and ammonium acetate via one-pot four-component reactions in the absence of additional catalyst. In the protocols, ammonium acetate serves not only as the fourth component but also as the catalyst.

A sequential multistep process for the fully mechanochemical, one-pot synthesis of the antiepileptic drug rufinamide

ABSTRACT Mechanochemistry is a powerful tool to develop environmentally benign syntheses of active pharmaceutical ingredients. In this context, we report here the synthesis of the anti-epileptic agent rufinamide through a one-pot sequential multi-component approach, which was fully carried out applying a ball milling method. This solid-state synthesis of rufinamide has proved to be more efficient in terms of sustainability than the equivalent conventional synthetic process in solution. The mechanochemical method presents several advantages such as shorter reaction times, pot economy, the absence of external heating and solvent use. The ball milling-based synthesis of rufinamide has shown excellent green metrics and it is in agreement with several principles of Green Chemistry.

BF3-etherate promoted facile access to vinyloxyimidazopyridines: a metal-free sustainable approach.

A convenient and metal-free synthesis of vinyloxyimidazopyridine derivatives has been attained via BF3.OEt2 promoted one-pot multicomponent approach. This procedure involves a facile coupling of 2-aminopyridine derivatives with arylglyoxal and alkyne derivatives. BF3.OEt2 complexation has successfully catalyzed the reaction at room temperature. Utilization of transition metal-free catalyst, mild reaction conditions, easy handling and operational simplicity are key features of developed process.

Development of a straightforward and efficient protocol for the one-pot multicomponent synthesis of substituted alpha-aminoallylphosphonates under catalyst-free condition

A catalyst-free practical version of Kabachnik-Fields strategy has been developed for the efficient and straightforward one-pot synthesis of diversely substituted α-aminoallylphosphonates, a limitedly reported class of biologically important α-aminophosphonates family. The protocol offers many advantages including avoidance of additive/catalyst, one-pot multicomponent approach, operational simplicity, excellent regioselectivity, good to excellent yields, relatively short reaction-time, gram-scale applicability, high atom-economy and low E-factor.

Synthesis, Crystal Structure and DFT Studies of 4-(2-(4,5-Dimethyl-2-(3,4,5-trimethoxyphenyl)-1H-imidazol-1-yl)ethyl)morpholine

The title compound 4-(2-(4,5-dimethyl-2-(3,4,5-trimethoxyphenyl)-1H-imidazol-1-yl)morpholine (DMTPM) was synthesized using a one-pot multicomponent approach. The molecular structure of the compound was charcterized with 1H & 13C NMR, HR-MS and single-crystal X-ray diffraction. In the ground-state, DMTPM molecular geometry was determined using the DFT based on B3LYP/6-31G(d,p) and compared to the experimental results. In addition, molecular electrostatic potential (MEP) map and molecular frontier orbitals (MFO) were performed and the results obtained were compatible with the electronic properties.

Cu-catalyzed one-pot multicomponent approach for the synthesis of symmetric and asymmetric 1,4-dihydropyridine (1,4-DHP) linked 1,2,3-triazole derivatives

Synthesis of various symmetric and asymmetric 1,4-DHP linked 1,2,3-triazole derivatives from economical and readily available starting materials via a convenient methodology in a single-pot method using CuSO4·5H2O as an efficient catalyst has been reported. The reaction proceeded efficiently under the optimized reaction conditions with excellent functional group compatibility providing the desired products in good yields. The method appears to be an efficient combinatorial strategy for the synthesis of new 1,4-DHP linked triazole derivatives.

Novel, green and sustainable route for synthesis of 5-aryl-4-phenyl-1,2,4-triazolidine-3-thiones

A highly efficient, one-pot, novel and greener straightforward multi-component approach has been disclosed for the facile synthesis of 5-aryl-4-phenyl-1,2,4-triazolidine-3-thiones from reaction of phenyl isothiocyanate, hydrazine hydrate and diverse aromatic aldehydes/cyclic ketones/isatins in the presence of a novel Lewis acid-surfactant-combined catalyst. High yields, use of ambient temperature and water as a universally accepted green solvent, simple work-up procedure, easy isolation of product, high atom economy makes the present method attractive, sustainable and economical.

L-Cysteine Catalyzed Environmentally Benign One-pot Multicomponent Approach Towards the Synthesis of Dihydropyrano[2,3-c]pyrazole Derivatives.

The pyrano[2,3-c]pyrazole derivatives are important building blocks of many biologically active compounds owing to their diverse biological potential for example, anti-inflammatory, anticancer, anti-microbial and anti-oxidant properties. Keeping in mind the wide range of applications of pyrano[2,3-c]pyrazoles, herein we intended to develop a novel synthetic methodology for dihydropyranopyrazoles. We were also interested in determining the influence of amino acids and dipeptides as a catalyst on the synthesis of pyrano[2,3-c]pyrazole derivatives. To achieve our objectives, we used a one-pot multi-component reaction of ethyl 3-oxobutanoate, propanedinitrile, hydrazine monohydrate and several substituted benzaldehydes by using different catalysts and solvents to synthesize our desired products in the presence of various catalysts. We found that optimal conditions for the preparation of pyrano[2,3-c]pyrazoles were L-cysteine (0.5 mol) in the presence of water:ethanol (9:1) at 90 °C. Various 1,4-dihydropyrano[2,3- c]pyrazoles were afforded by using several substituted benzaldehydes in 66-97% yields. We described a green and environmentally benign method to synthesize pyrano[2,3-c]pyrazoles in a one-pot four component reaction of ethyl 3-oxobutanoate, propanedinitrile, hydrazine monohydrate and different substituted benzaldehyde in the presence of L-cysteine in aqueous ethanol (9:1) at 90 oC. Excellent yields of the products, simple work-up, easily available starting materials, use of green solvents, naturally occurring catalyst, non-toxicity, non-chromatographic purification and environmentally benign reaction conditions are some main advantages of this protocol.