One-pot Cascade Reaction Research Articles

Synthesis, Characterization, and Thin-Film Properties of Post-Functionalized N,N-Dimethylanilinoethynyl-Substituted Cyclobutenofullerenes.

A π-extended cyclobutenofullerene containing an N,N-dimethylanilinoethynyl group was synthesized via a one-pot cascade reaction of C60 with the corresponding propargylic phosphate. The cyclobutenofullerene was further modified using either one-pot or sequential post-functionalization methods, yielding derivatives containing altered addend structures. During one-pot post-functionalization, hydration reaction of the alkyne moiety continued after the formation of cyclobutenofullerenes. The sequential post-functionalization approach involved introducing the tetracyanobutadiene structure through formal [2 + 2] cycloaddition and a subsequent retroelectrocyclization reaction with tetracyanoethylene. The electronic and optical properties of the derivatives in solution, as well as their field-effect transistor behavior in thin films, were thoroughly assessed to elucidate the optoelectronic differences arising from various addend structures. The properties of the three characteristic cyclobutenofullerene derivatives in the solution and thin films significantly varied depending on the addends. Among the three derivatives studied, only cyclobutenofullerene, featuring a folded structure induced by the hydration of the alkyne moiety, exhibited n-type semiconductor behavior in the thin films. The findings of this study present a novel methodology for synthesizing and functionalizing fullerene derivatives, together with a conceptual framework for tailoring molecular properties.

Iron-Catalyzed One-Pot Cascade Reactions of Oximes with Inactivated Saturated Ketones: Entry to Highly Substituted Pyridines.

An iron-catalyzed oxidative [3 + 3] annulation of oxime esters with inactivated saturated ketones is described. This cascade strategy allows one-step rapid synthesis of various structurally important pyridines through an oxidative dehydrogenation/annulation/oxidative aromatization sequence via direct α,β-dehydrogenation of simple saturated ketones followed by annulation with oximes. This method shows good functional group tolerance, readily accessible starting materials, a wide substrate scope, high chemoselectivity, and no need for extra stoichiometric oxidant and is also applicable to the late-stage functionalization of natural products.

An engineered aldolase enables the biocatalytic synthesis of 2′-functionalized nucleoside analogues

AbstractNucleosides functionalized at the 2′-position play a crucial role in therapeutics, serving as both small-molecule drugs and modifications in therapeutic oligonucleotides. However, the synthesis of these molecules often presents substantial synthetic challenges. Here we present an approach to the synthesis of 2′-functionalized nucleosides based on enzymes from the purine nucleoside salvage pathway. Initially, active-site variants of deoxyribose-5-phosphate aldolase were generated for the highly stereoselective synthesis of d-ribose-5-phosphate analogues with a broad range of functional groups at the 2-position. Thereafter, these 2-modified pentose phosphates were converted into 2′-modified purine analogues by construction of one-pot multienzyme cascade reactions, leading to the synthesis of guanosine (2′-OH) and adenosine (2′-OH, 2′-Me, 2′-F) analogues. This cascade allows for the control of the 2′-functional group alongside 2-stereochemistry. Our findings demonstrate the capability of these biocatalytic cascades to efficiently generate 2′-functionalized nucleosides, starting from simple starting materials.

Construction of Spatially Separated Acid-Base Sites inside and outside Metal-Organic Framework Nanocrystals for Efficient Cascade Reactions.

The development of acid-base catalysts for one-pot cascade reactions remains challenging because of the inherent incompatibility of inorganic acid and base active sites. Here, we introduced an innovative approach that employs spatial separation to construct separated inorganic acid-base sites, achieving sequence control of acid-base cascade reactions. The as-prepared bifunctional catalyst applied metal-organic framework (MOF) nanocrystals as spatial separators, with the inside microcavities loaded with 1 nm inorganic polyoxometalate acid H3PMo12O40 clusters (NENU-5) and the outside crystal surface covered with basic CuCo layered double hydroxide (CuCo-LDH) nanosheets. By applying the resultant NENU-5@CuCo-LDH catalyst to cascade deacetalization-Knoevenagel condensation, over 99% of the benzaldehyde dimethyl acetal (BDMA) was transformed into the final benzylidene cyanoacetate (BCA) with a 99% yield at 80 °C and solvent-free conditions. Compared to the random NENU-5+CuCo-LDH, the NENU-5@CuCo-LDH with spatially separated acid-base sites indicated a higher reaction rate due to the designed reaction sequence and the shorter mass transfer pathway. Moreover, this hierarchical structure showed inherent shape selectivity and extraordinary stability. This study introduces spatial separation to address the incompatibility issue between inorganic acid and base active sites, offering novel perspectives for acid-base systems.

WITHDRAWN: Zn(OTf)2-catalyzed One-Pot Cascade Reaction to Construct Benzyl-pyrazolyl Coumarin Derivatives

The article has been withdrawn at the request of the authors. Bentham Science apologizes to the readers of the journal for any inconvenience this may have caused. The Bentham Editorial Policy on Article Withdrawal can be found at https://benthamscience.com/editorial-policies-main.php BENTHAM SCIENCE DISCLAIMER: It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Furthermore, any data, illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication.

Spatial segregation of catalytic sites within Pd doped H-ZSM-5 for fatty acid hydrodeoxygenation to alkanes

Spatial control over features within multifunctional catalysts can unlock efficient one-pot cascade reactions, which are themselves a pathway to aviation biofuels via hydrodeoxygenation. A synthesis strategy that encompasses spatial orthogonality, i.e., one in which different catalytic species are deposited exclusively within discrete locations of a support architecture, is one solution that permits control over potential interactions between different sites and the cascade process. Here, we report a Pd doped hierarchical zeolite, in which Pd nanoparticles are selectively deposited within the mesopores, while acidity is retained solely within the micropores of ZSM-5. This spatial segregation facilitates hydrodeoxygenation while suppressing undesirable decarboxylation and decarbonation, yielding significant enhancements in activity (30.6 vs 3.6 moldodecane molPd−1 h−1) and selectivity (C12:C11 5.2 vs 1.9) relative to a conventionally prepared counterpart (via wet impregnation). Herein, multifunctional material design can realise efficient fatty acid hydrodeoxygenation, thus advancing the field and inspiring future developments in rationalised catalyst design.

One-pot cascade conversion of furfural to isopropyl levulinate catalyzed by sulfonic acid-functionalized UiO-66

A porous sulfonic acid-functionalized zirconium-based metal–organic framework possessing both Lewis acid and Brønsted acid sites (UiO-66-SO3H) was synthesized and tested for the selective conversion of furfural (FUR) to isopropyl levulinate (IPL) through one-pot cascade reaction. UiO-66-SO3H exhibited excellent catalytic performance, and the conversion of FUR as well as the yield and selectivity of IPL reached 96.4 %, 86.0 %, and 89.2 %, respectively. UiO-66-SO3H could be simply recovered and reused, but the catalytic performance was significantly decreased. The FUR conversion and IPL yield dropped to 73.8 % and 65.1 %, respectively, after 1 cycle, and the reason for the decrease in the catalyst activity were also investigated. It was found that the decrease was mainly caused by the loss of some −SO3H groups, and the cyclic performance of UiO-66-SO3H could be restored by supplementing a small amount of BDC-SO3Na. A plausible mechanism for the selective synthesis of IPL from FUR was proposed, wherein both Lewis acid and Brønsted acid sites played important roles. This work provides guidance for the selective conversion of FUR into IPL, and the high-valued utilization of biomass and its derivatives.

Designing Cobalt(II) Complex for Chemoselective Synthesis of 2-Aryl-3-Formyl Indoles from Amino Alcohols and Alcohols†.

An air-stable, inexpensive, and isolable cobalt(II) complex (C1) of N-((1-methyl-1H-imidazol-2-yl)methyl)-2-(phenylselanyl)ethan amine (L1) was synthesized and characterized. The complex was used to catalyze a one-pot cascade reaction between 2-(2-aminophenyl)ethanols and benzyl alcohol derivatives. Interestingly, 2-aryl-3-formylindole derivatives were formed instead of N-alkylated or C-3 alkylated indoles. A broad substrate scope can be activated using this protocol with only 5.0 mol % catalyst loading to achieve up to 87 % yield of 2-aryl-3-formylindole derivatives. The mechanistic studies suggested that the reaction proceeds through tandem imine formation followed by cyclization.

Biocatalysis enables the scalable conversion of biobased furans into various furfurylamines

Biobased furans have emerged as chemical building blocks for the development of materials because of their diverse scaffolds and as they can be directly prepared from sugars. However, selective, efficient, and cost-effective scalable conversion of biobased furans remains elusive. Here, we report a robust transaminase (TA) from Shimia marina (SMTA) that enables the scalable amination of biobased furanaldehydes with high activity and broad substrate specificity. Crystallographic and mutagenesis analyses provide mechanistic insights and a structural basis for understanding SMTA, which enables a higher substrate conversion. The enzymatic cascade process established in this study allows one-pot synthesis of 2,5-bis(aminomethyl)furan (BAMF) and 5-(aminomethyl)furan-2-carboxylic acid from 5-hydroxymethylfurfural. The biosynthesis of various furfurylamines, including a one-pot cascade reaction for BAMF generation using whole cells, demonstrates their practical application in the pharmaceutical and polymer industries.

Synthesis and glycosidase inhibition of 3,4,5-trihydroxypiperidines using a one-pot amination-cyclisation cascade reaction

Trihydroxypiperidines are a therapeutically valuable class of iminosugar. We applied a one-pot amination-cyclisation cascade reaction to synthesise 3,4,5-trihydroxypiperidine stereoisomers in three steps from commercially available pentoses and in excellent overall yields. Using our methodology, the yields of the syntheses of meso-1, meso-2 and 3L are the highest reported to date. The synthetic methodology was readily extended to the three-step synthesis of N-alkyl derivatives by replacing the ammonia nitrogen source with a primary amine. The trihydroxypiperidines and N-alkyl analogues were screened for enzyme inhibitory activity using Fabrazyme (Fabry disease), GCase (Gaucher's disease), Agrobacterium sp. β-glucosidase, and Escherichia coli β-galactosidase. N-Phenylethyl 3,4,5-trihydroxypiperidine (N-phenylethyl-1-(3R,4R,5S)-piperidine-3,4,5-triol) showed good inhibitory activity of Fabrazyme (Ki = 46 μM). This activity was abolished when the N-phenylethyl group was removed or replaced with a non-aromatic alkyl chain.

Cascade enzymatic synthesis of a statin side chain precursor - the role of reaction engineering in process optimization.

Statins are an important class of drugs used to lower blood cholesterol levels and are often used to combat cardiovascular disease. In view of the importance of safe and reliable supply and production of statins in modern medicine and the global need for sustainable processes, various biocatalytic strategies for their synthesis have been investigated. In this work, a novel biocatalytic route to a statin side chain precursor was investigated in a one-pot cascade reaction starting from the protected alcohol N-(3-hydroxypropyl)-2-phenylacetamide, which is oxidized to the corresponding aldehyde in the first reaction step, and then reacts with two equivalents of acetaldehyde to form the final product N-(2-((2S,4S,6S)-4,6-dihydroxytetrahydro-2H-pyran-2-yl)ethyl)-2-phenylacetamide (phenylacetamide-lactol). To study this complex reaction, an enzyme reaction engineering approach was used, i.e. the kinetics of all reactions occurring in the cascade (including side reactions) were determined. The obtained kinetic model together with the simulations gave an insight into the system and indicated the best reactor mode for the studied reaction, which was fed-batch with acetaldehyde feed to minimize its negative effect on the enzyme activity during the reaction. The mathematical model of the process was developed and used to simulate different scenarios and to find the reaction conditions (enzyme and coenzyme concentration, substrate feed concentration and flow rate) at which the highest yield of phenylacetamide-lactol (75%) can be obtained. In the end, our goal was to show that this novel cascade route is an interesting alternative for the synthesis of the statin side chain precursor and that is why we also calculated an initial estimate of the potential value addition.

Establishing an Artificial Pathway for the Biosynthesis of Octopamine and Synephrine.

In this study, we designed an artificial pathway composed of tyramine β-hydroxylase (TBH) and phenylethanolamine N-methyltransferase (PNMT) for the biosynthesis of both octopamine and synephrine. As most TBH and PNMT originate from eukaryotic animals and plants, the heterologous expression and identification of functional TBH and PNMT are critical for establishing the pathway in mode microorganisms like Escherichia coli. Here, three TBHs were evaluated, and only TBH from Drosophila melanogaster was successfully expressed in the soluble form in E. coli. Its expression was promoted by evaluating the effects of different expression strategies. The specific enzyme activity of TBH was optimized up to 229.50 U·g-1, and the first step in the biosynthetic pathway was successfully established and converted tyramine to synthesize 0.10 g/L of octopamine. Furthermore, the second step to produce synephrine from octopamine was developed by screening PNMT, enhancing enzyme activity, and optimizing reaction conditions, with a maximum synephrine production of 2.02 g/L. Finally, based on the optimization of the reaction conditions for each individual reaction, the one-pot cascade reaction for synthesizing synephrine from tyramine was constructed by combining the TBH and PNMT. The synthetic synephrine reached 30.05 mg/L with tyramine as substrate in the two-step enzyme cascade system. With further optimization and amplification, the titers of octopamine and synephrine were increased to 0.45 and 0.20 g/L, respectively, with tyramine as substrate. This work was the first achievement of the biosynthesis of octopamine and synephrine to date.

Aquivion-Based Spray Freeze-Dried Composite Materials for the Cascade Production of γ-Valerolactone.

The development of multifunctional catalysts is a necessary step to effectively carry out one-pot cascade reactions, such as that from furfural to γ-valerolactone. This research effort faces the challenge posed by the intrinsic limit of how many kinds of catalytic sites a single material can bear. In this work, the application of Spray-Freeze Drying (SFD) as a synthetic technique for the preparation of a wide range of innovative composite multi-functional catalysts is reported. Herein we show that by the proper combination of Aquivion as a highly active Brønsted acid catalyst and metal oxides as both support materials and Lewis acids (LAS) enable to achieve highly unique efficient and effective dual acid composite catalysts that are able to carry out the cascade reaction from furfural to γ-valerolactone. The dual catalytic system comprised of Aq/ZrO2 with 30 % polymer content prepared via spray-freeze drying exhibited GVL yields of 25 % after only 2 h at 180 °C and a remarkably high productivity of 4470 μmolGVL gCat -1 h-1, one of the highest reported results. Mechanistic studies based on experimental and advanced characterisation and spectroscopic techniques, such as, SEM, TEM, 15N MAS NMR and 19F MAS NMR indicate that activity arises from the proper tuning of BAS/LAS (Brønsted Acid Site/Lewis Acid Site) acidic properties.

Mechanism-Guided Computational Design Drives meso-Diaminopimelate Dehydrogenase to Efficient Synthesis of Aromatic d-amino Acids.

Aromatic d-amino acids (d-AAs) play a pivotal role as important chiral building blocks and key intermediates in fine chemical and drug synthesis. Meso-diaminopimelate dehydrogenase (DAPDH) serves as an excellent biocatalyst in the synthesis of d-AAs and their derivatives. However, its strict substrate specificity and the lack of efficient engineering methods have hindered its widespread application. Therefore, this study aims to elucidate the catalytic mechanism underlying DAPDH from Proteus vulgaris (PvDAPDH) through the examination of its crystallographic structure, computational simulations of potential energies and molecular dynamics simulations, and site-directed mutagenesis. Mechanism-guided computational design showed that the optimal mutant PvDAPDH-M3 increased specific activity and catalytic efficiency (kcat/Km) for aromatic keto acids up to 124-fold and 92.4-fold, respectively, compared to that of the wild type. Additionally, it expanded the substrate scope to 10 aromatic keto acid substrates. Finally, six high-value-added aromatic d-AAs and their derivatives were synthesized using a one-pot three-enzyme cascade reaction, exhibiting a good conversion rate ranging from 32 to 84% and excellent stereoselectivity (enantiomeric excess >99%). These findings provide a potential synthetic pathway for the green industrial production of aromatic d-AAs.

Unspecific Peroxygenase (UPO) can be Tuned for Oxygenation or Halogenation Activity by Controlling the Reaction pH.

Unspecific Peroxygenases (UPOs) are increasingly significant enzymes for selective oxygenations as they are stable, highly active and catalyze their reactions at the expense of only hydrogen peroxide as the oxidant. Their structural similarity to chloroperoxidase (CPO) means that UPOs can also catalyze halogenation reactions based upon the generation of hypohalous acids from halide and H2O2. Here we show that the halogenation and oxygenation modes of a UPO can be stimulated at different pH values. Using simple aromatic compounds such as thymol, we show that, at a pH of 3.0 and 6.0, either brominated or oxygenated products respectively are produced. Preparative 100 mg scale transformations of substrates were performed with 60-72 % isolated yields of brominated products obtained. A one-pot bromination-oxygenation cascade reaction on 4-ethylanisole, in which the pH was adjusted from 3.0 to 6.0 at the halfway stage, yielded sequentially brominated and oxygenated products 1-(3-bromo-4-methoxyphenyl)ethyl alcohol and 3-bromo-4-methoxy acetophenone with 82 % combined conversion. These results identify UPOs as an unusual example of a biocatalyst that is tunable for entirely different chemical reactions, dependent upon the reaction conditions.

Adaptive maleimide-fused macrocyclic clamps: Synthesis, structures, and complexations with polycyclic aromatic hydrocarbons

The photoactive macrocyclic molecules attract attention because of their important roles in supramolecular chemistry as well as photoelectronic applications. Herein, two D-A conjugated macrocycles containing two maleimide nodes have been successfully obtained via an one-pot cascade reaction of Perkin and imidization condensations. Owing to the incorporation of two bulky 1,4-dimethoxybenzene moieties at the narrow maleimide corners, the obtained conjugated macrocycles have been equipped with two adaptive clamps, which can adjust to the guest sizes to capture the guest molecules. Interestingly, the co-crystallization with larger-sized polycyclic aromatic hydrocarbons (PAHs) leads to the 1:1 host-guest complexes, while with smaller-sized solvents results in the 1:2 complexes. Furthermore, the rotatable 1,4-dimethoxybenzene moieties endowed such macrocyclic fluorophores with pronounced solvatochromic and aggregation-induced emission enhancement (AIEE) phenomena.

Synthesis of Fluorine-Containing Multisubstituted Oxa-Spiro[4,5]cyclohexadienones via a Fluorinated Alcohol-Catalyzed One-Pot Sequential Cascade Strategy.

In recent years, the application of fluorinated alcohols as solvents, cosolvents, or additives has become important in modern organic synthesis. However, their potential as efficient catalysts in organic synthesis has not been well-explored. In this article, we report on the development of a one-pot sequential cascade reaction of p-quinone methides with difluoroenoxysilanes using hexafluoroisopropanol as catalyst. This reaction allows for the preparation of fluorinated multisubstituted oxa-spiro[4,5]cyclohexadienones. By using 50 mol % 1,1,1,3,3,3-Hexafluoroisopropanol (HFIP), the reaction proceeds smoothly to yield 1,6-conjugated products, which are then subjected to oxidative dearomatization/hemiacetalization using PhI(OAc)2. The overall process affords moderate to high yields and excellent diastereoselectivities.

Identification and Characterization of Glycosyltransferases Involved in the Biosynthesis of Neodiosmin.

Glycosylation plays a very important role in plant secondary metabolic modifications. Neodiosmin, identified as diosmetin-7-O-neohesperidoside, not only acts to mitigate bitterness and enhance the flavor of food but also serves as a pivotal metabolite that reinforces plant immunity. Investigating its biosynthetic pathway in plants is crucial for optimizing fruit quality and fortifying plant immune responses. In this study, through analysis of transcriptomic data from Astilbe chinensis, we identified two novel uridine diphosphate (UDP)-glycosyltransferases (UGTs): Ach14791 (AcUGT73C18), responsible for flavonoid 7-O-glycosylation and Ach15849 (AcUGT79B37), involved in flavonoid-7-O-glucoside-2″-O-rhamnosylation. By delving into enzymatic properties and catalytic promiscuity, we developed a biosynthesis route of neodiosmin by establishing a one-pot enzyme-catalyzed cascade reaction. Simultaneously, lonicerin and rhoifolin were also successfully synthesized using the same one-pot dual-enzyme catalytic reaction. Taken together, our findings not only identified two novel UGTs involved in neodiosmin biosynthesis but also provided important biocatalytic components for the microorganism-based biosynthesis of flavonoid-7-O-disaccharide compounds.

Total Synthesis of Tetracyclic Spirooxindole Alkaloids via a Double Oxidative Rearrangement/Cyclization Cascade.

Skeleton rearrangement could rapidly transfer simple molecules to complex structures and has significant potential in the total synthesis of natural products. We developed a one-pot reaction cascade of double oxidative rearrangement of furan and indole followed by a nucleophilic cyclization that was successfully applied for the formal synthesis of rhynchophylline/isorhynchophylline and the first total synthesis of (±)-7(R)-geissoschizol oxindole/(±)-7(S)-geissoschizol oxindole. In addition, the geissoschizol oxindoles were revised to their C3 epimers, and the mechanism for the reversed stereochemistry through the retro-Mannich/Mannich cascade was proposed and supported by density functional theory calculations.

Preparation of Spirocyclic Vinylic Carbonates from Allylic Alcohols.

We present the synthesis of exo- and endo-spirovinylethylene carbonates, starting from various cyclic allylic alcohols. This one-pot cascade reaction to the spirocyclic scaffold was optimized using a design of experiments approach. The introduction of spirovinylethylene carbonates broadens the scope of using these in catalytic applications and provides an easy synthetic entry into spirocyclic scaffolds of various ring sizes.