One-dimensional Nanowires Research Articles

Template-directed synthesis of one-dimensional hexagonal PdTe nanowires for efficient ethanol electrooxidation.

A template-directed synthesis of one-dimensional hexagonal PdTe nanowires using Te nanowires as a template through a two-step hydrothermal process is developed, which exhibit excellent mass activity of 4.4 A mgPd-1 for ethanol electrooxidation in an alkaline medium. This work enriches the controlled synthesis of one-dimensional noble metal chalcogenide nanomaterials.

In Situ STEM Observation of Phase Transition Triggered by Mo Migration in MoTe2.

The heterostructure of transition metal dichalcogenides (TMDs), such as one-dimensional (1D) nanowires embedded in two-dimensional (2D) nanosheets, has drawn much research attention due to its unique electronic, spintronic, magnetic, and catalytic properties. The general approach for preparing such a heterostructure is through electron beam lithography or annealing on the 2D template, triggering direct formation of the 1D component within the 2D matrix. However, the thermodynamic mechanism behind the transition from 2D to 1D is still not well clarified. Here, by in situ scanning transmission electron microscopy (STEM), we present a direct observation of two metastable phases, M-Mo1+xTe2 and M-Mo6Te6, which enable a smooth transition from 2D 2H-MoTe2 nanosheets to 1D Mo6Te6 nanowires (NWs). As a result, an atomically sharp "NW-MoTe2-NW" heterojunction is formed, with a coherent interface between 2D 2H-MoTe2 and 1D Mo6Te6 NWs. The study provides a deep understanding of the growth of 1D Mo6Te6 NWs from 2D MoTe2 and a pathway for predictive and controlled atomic-level manipulation for the directed synthesis of the 1D/2D heterostructure.

Innovative multiphase ultrasonic-assisted method for high-purity, stable, and cost-effective copper nanowire synthesis

The synthesis of copper nanowires (CuNWs) using modified polyols with hexadecylamine or octadecylamine as capping agents, known for their ease of operation, rapid reaction, and suitability for mass production, often encounters challenges such as the presence of copper particles, numerous copper nanorods, difficulty in purifying organic compounds, and air instability as by-products. In addressing these issues, this study introduces an innovative multiphase ultrasonic-assisted separation method. By utilizing ultrasound to accelerate the dissolution of hexadecylamine and facilitate the separation movement of CuNWs and by-products in hydrophilic and hydrophobic phases, the aim of achieving high purification of CuNWs is realized. Through the introduction of an ultra-thin hexadecylamine layer (~ 3.5 nm) on the surface of CuNWs and leveraging the active adsorption of silver seed crystals, combined with the control CuNWs reaction concentration, silver-coated CuNWs with a dense and uniform surface thickness of 12–15 nm are obtained. By enhancing purity, stability, and cost-effectiveness, this research represents a significant advancement in the field of one-dimensional nanowires and their devices.

Synthesis of Novel One-Dimensional Selenium Nanowires for Ultrafast Fiber Lasers in Different Bands

Synthesis of Novel One-Dimensional Selenium Nanowires for Ultrafast Fiber Lasers in Different Bands

High-Performance Gate-Voltage-Tunable Photodiodes Based on Nb2Pd3Se8/WSe2 Mixed-Dimensional Heterojunctions.

The mixed-dimensional (MD) van der Waals (vdWs) heterojunction for photodetectors has garnered significant attention owing to its exceptional compatibility and superior quality. Low-dimensional material heterojunctions exhibit unique photoelectric properties attributed to their nanoscale thickness and vdWs contact surfaces. In this work, a novel MD vdWs heterojunction composed of one-dimensional (1D) Nb2Pd3Se8 nanowires and two-dimensional (2D) WSe2 nanosheets is proposed. The heterojunction's energy band engineering is accomplished by manipulating the Fermi level of the bipolar 2D material via gate voltage, resulting in a rectification characteristic that can be adjusted with gate voltage. Under 685 nm laser irradiation, it demonstrates exceptional self-powered photodetection performance, attaining a photoresponsivity of 1.45 A W-1, an ultrahigh detectivity of 6.8 × 1012 Jones, and an ultrafast response time of 37/64 μs at zero bias. In addition, a broadband photodetector from 255 to 1064 nm is realized. These results demonstrate the great potential of Nb2Pd3Se8/WSe2 MD heterostructures for advanced electronic and optoelectronic devices.

Ternary MXene/PANI/ZnO-based composite with a built-in p–n heterojunction for high-performance supercapacitor applications

Abstract Two-dimensional (2D) Ti3C2T x MXene-based materials have attracted widespread attraction in the field of energy storage owing to their high conductivity and accordion-like structure. However, challenges such as restacking and oxidative degradation of the Ti3C2T x MXene structure lead to poor stability, low conductivity, low specific capacitance and, consequently, a low specific energy, hindering their extensive adoption at an industrial scale. In this study, a ternary MXene/polyaniline (PANI)/ZnO (MPZ) composite has been synthesized via surface engineering of two-dimensional (2D) MXene using one-dimensional (1D) PANI nanowires and ZnO nanoparticles to enhance its specific energy and stability while sustaining its specific power. 1D PANI nanowires and ZnO nanoparticles act as spacers to prevent restacking, while also exposing the suppressed redox active sites of 2D MXene and preventing it from being oxidized by forming a porous conductive network all over the surface of the MXene. PANI and ZnO also provide additional electroactive redox sites by forming p–n heterojunctions, thus enhancing faradaic redox reactions and the specific capacitance of the MPZ composite. As a result, the overall electrochemical performance and stability of the ternary MPZ composite are enhanced due to the synergistic interactions among the individual components within the ternary MPZ composite. At a low current density of 0.1 A g−1, the ternary MPZ composite exhibited a maximum specific capacitance of 651.96 F g−1 and a highest specific energy of 32.59 Wh Kg−1 while maintaining a specific power of 60 W Kg−1 as compared to MXene and binary MP composite. Furthermore, it showcased exceptional cyclic stability over 10 000 cycles with 94.75% and 92.95% capacitive retention at 0.6 A g−1 current density and 40 mV s−1 scan rate, respectively. Thus, this current study highlights an effective strategy to enhance the specific energy of MXene-based supercapacitors through surface engineering and the construction of p–n heterojunctions within the composite.

A novel molecularly imprinted electrochemical sensor based on quasi-three-dimensional nanomaterials Nb2CTx/AgNWs for specific detection of sulfadiazine.

A novel molecularly imprinted electrochemical sensor (MIECS) was constructed for the specific detection of sulfadiazine (SDZ) in food. Niobium carbide (Nb2CTx) as a typical two-dimensional lamellar nanomaterial has good electrical conductivity and unique structure, which was assembled with one-dimensional silver nanowires (AgNWs) to form quasi-three-dimensional composite nanomaterials (Nb2CTx/AgNWs). As spacer material, AgNWs prevented the aggregation of Nb2CTx and the collapse of Nb2CTx layers. At the same time, a fast electron transport channel was constructed through the synergistic effect between nanomaterialsthe two. The Nb2CTx/AgNWs realized the enhancement of electrical signals. Molecularly imprinted polymers (MIPs) endowed the sensor with selectivity, achieving the specific detection of sulfadiazine. Under the optimal experimental conditions, the method has a wide linear range (1 × 10-8-1 × 10-4 mol L-1) and a low limit of detection (1.30 × 10-9 mol L-1). The sensor was used to detect sulfadiazine in pork, chicken, and feed samples, and the recovery was 82.61-94.87%. The results were in good agreement with the HPLC results, which proved the accuracy and practicability of the method.

Preparation of unique corn-stalk-like MnO₂/CoNi nanowires via in situ epitaxial attachment growth for monitoring environmental pollutant hydrazine

This paper presents the synthesis of a novel corn-stalk-like MnO₂/CoNi oxide composite using an in situ epitaxial attachment growth strategy, in which CoNi oxide nanosheets are anchored onto MnO₂ nanowires. The one-dimensional MnO₂ nanowires, with their large specific surface area, serve as a support to enhance the electronic conductivity of the CoNi oxides. Hexamethylenetetramine (HMTA) is employed as an alkaline linking agent, playing a key role in shaping the CoNi oxide nanosheets and ensuring their successful growth on the MnO₂ nanowires. The MnO₂/CoNi oxide composite-based electrochemical sensor exhibits excellent synergistic and interfacial effects, promoting electron transfer and charge migration. This composite material shows outstanding electrocatalytic performance for hydrazine detection, with a broad linear range (0.48−6106.58 μM), low detection limit (0.286 μM, S/N = 3), and high sensitivity (0.037 μA μM⁻1). Moreover, when tested for hydrazine detection in water samples, the sensor achieved a recovery rate of 95.7–105 %, highlighting its high sensitivity and rapid response in practical applications.

Controlled Vapor-Liquid-Solid Growth of Long and Remarkably Thin Pb1-xSnxTe Nanowires with Strain-Tunable Ferroelectric Phase Transition.

The Pb1-xSnxTe family of compounds possess a wide range of intriguing and useful physical properties, including topologically protected surface states, robust ferroelectricity, remarkable thermoelectric properties, and potential topological superconductivity. Compared to bulk crystals, one-dimensional (1D) nanowires (NWs) offer a unique platform to enhance the functional properties and enable new capabilities, e.g., to realize 1D Majorana zero modes for quantum computations. However, it has been challenging to achieve controlled synthesis of ultrathin Pb1-xSnxTe (0 ≤ x ≤ 1) nanowires in the truly 1D region. In this work, we report on a Au-catalyzed vapor-liquid-solid (VLS) growth of remarkably thin (20-30 nm) and sufficiently long (several to tens of micrometers) Pb1-xSnxTe nanowires of high single-crystalline quality in a controlled fashion. This controlled growth was achieved by enhancing the incorporation of Te into the Au catalyst particle to facilitate the precipitation of the Sn/Pb species and suppress the enlargement of the particle, which we identified as a major challenge for the growth of ultrathin nanowires. Our growth strategy can be easily extended to other compound and alloy nanowires, where the constituent elements have different incorporation rates into the catalyst particle. Furthermore, the growth of thin Pb1-xSnxTe nanowires enabled strain-dependent electrical transport measurements, which shows an enhancement of electrical resistance and ferroelectric transition temperature induced by uniaxial tensile strain along the nanowire axial direction, consistent with density functional theory calculations of the structural phase stability.

High-Performance Ultraviolet to Near-Infrared Antiambipolar Photodetectors Based on 1D CdSxSe1-x/2D Te Heterojunction.

Antiambipolar heterojunctions are regarded as a revolutionary technology in the fields of electronics and optoelectronics, enabling the switch between positive and negative transconductance within a single device, which is crucial for diverse logic circuit applications. This study pioneers a mixed-dimensional photodetector featuring antiambipolar properties, facilitated by the van der Waals integration of one-dimensional CdSxSe1-x nanowires and two-dimensional Te nanosheets. This antiambipolar device enables flexible control over carrier transport via gate voltage, thus paving new paths for future optoelectronic devices. Furthermore, by precisely managing the stoichiometry of the ternary alloy CdSxSe1-x nanowires, fine-tuning of the nanowire band structure is achieved. This allows for customizable heterojunction band alignment (Type I and Type II), enabling adjustable band alignment. Through sophisticated band engineering, optimal Type II band alignment is achieved at the CdSxSe1-x/Te interface, significantly enhancing the device's photoelectric conversion efficiency through the synergistic effect of different dimensional materials. Exhibiting outstanding photoresponse across a broad spectral range from ultraviolet to near-infrared, especially under 450 nm illumination, the CdSxSe1-x/Te heterojunction photodetector demonstrates superior performance, including an impressive responsivity of 284 A W-1, a high detectivity of 1.07 × 1017 Jones, an elevated external quantum efficiency of 7.83 × 104 %, and a swift response time of 11 μs. Ultimately, this customizable antiambipolar photodetector lays a solid foundation for the advancement of next-generation optoelectronic technologies.

Different temperature-dependent fluorescence properties of CsPbBr3 nanorods and nanowires

Abstract The morphology of totally inorganic metal halide perovskites has a certain influence on their optoelectronic properties. In this study, one-dimensional CsPbBr3 nanorods (NRs) and nanowires (NWs) were arranged utilizing a boiling injection strategy. By controlling the processing time, NRs with a length of roughly 63 nm and NWs with a length of 300 nm were obtained, and it was found that the nanowires were grown from the nanorods. Temperature-dependent photoluminescence (PL) measurements were conducted on CsPbBr3 NRs and NWs, and NRs exhibit a more stable excitonic state at high temperatures (>240 K). This study provides a method to change the morphology of one-dimensional metal halide perovskite nanomaterials without doping, further promoting the application of one-dimensional all-inorganic perovskite materials in the field of optoelectronics.

Construction of 2D/1D rGO/H2Ti3O7 composite as anode for high performance lithium-ion batteries

Ultrafine one-dimensional (1D) H2Ti3O7 nanowires were prepared by a hydrothermal reaction with high concentration of KOH as base source. Then 2D/1D rGO/H2Ti3O7 architecture was constructed and investigated as the anode material for lithium-ion batteries. Benefiting from the addition of rGO nanosheets and the retention of ultrafine 1D H2Ti3O7 nanowires, the rGO/H2Ti3O7 electrode presented superior electrochemical performance with excellent rate capability, long cycling stability and high capacity in half cells. It delivered high reversible capacities of 274 mAh g−1 at 0.1 A g−1 and 163 mAh g−1 at 1 A g−1, as well as a long-term cycling performance (259.3 mAh g−1 at 0.2 A g−1 after 1000 cycles). The excellent electrochemical performance of the composite can be attributed to the unique architecture with smaller diameter of 1D H2Ti3O7 nanowires and conductive rGO nanosheets to shorten the transmission distance of electrons and Li+ and improve the electrical conductivity in rGO/H2Ti3O7 composite.

High-Performance 1D CdS/2D Te Heterojunction Photodetector

Abstract Van der Waals heterostructures facilitate the versatile combination of two-dimensional (2D) materials with semiconductors that possess distinctive band structures, offering a promising platform for developing photodetectors with extensive spectral range and high sensitivity. This study showcases the flawless integration of one-dimensional (1D) CdS nanowires with 2D Te nanosheets, resulting in the creation of a high-performance, mixed-dimensional heterojunction photodetector. Bandgap engineering at the CdS/Te interface promotes Type II band alignment, markedly improving the separation and transport of photo-generated charge carriers. Additionally, the interaction between materials of different dimensions significantly enhances the device’s photoresponsivity and detectivity. When operated at low bias, the photodetector displays an impressive rectification ratio of up to 8.57×103, along with superior photoelectric performance spanning the ultraviolet to visible light spectrum. Particularly under 450 nm wavelength laser illumination, the device displayed a high photoresponsivity of up to 126 A W−1, a high detectivity of 1.03×1010 Jones, an external quantum efficiency of up to 3.49×102%, and a rapid response time of 35 ms. The photoresponsivity of this device was at least an order of magnitude higher than other reported mixed-dimensional heterojunction photodetectors. The development of the 1D CdS/2D Te heterostructure opens new pathways for high-sensitivity, broad-spectrum photodetection technologies.

Contact Geometry-Dependent Excitonic Emission in Mixed-Dimensional van der Waals Heterostructures.

Manipulation of excitonic emission in two-dimensional (2D) materials via the assembly of van der Waals (vdW) heterostructures unlocks numerous opportunities for engineering their photonic and optoelectronic properties. In this work, we introduce a category of mixed-dimensional vdW heterostructures, integrating 2D materials with one-dimensional (1D) semiconductor nanowires composed of vdW layers. This configuration induces spatially distinct localized excitonic emissions through a tailored interfacial heterolayer atomic arrangement. By precisely adjusting both the axial and sidewall facet orientations of bottom-up grown PbI2 vdW nanowires and by transferring them onto 1L WSe2 flakes, we establish vdW heterointerfaces with either perpendicular or parallel interatomic arrangements. The edge-standing heterojunction, featuring perpendicular PbI2 layers atop WSe2, promotes efficient charge transfer through the edges and coupled localized states, leading to an enhanced redshifted excitonic emission. Conversely, the layer-by-layer heterointerface, where PbI2 layers are in parallel contact with WSe2, exhibits substantial quenching due to deep midgap states in a type-II alignment, as evidenced by power-dependent measurements and first-principle calculations. Our results introduce a method for actively manipulating excitonic emissions in 2D transition metal dichalcogenides (TMDs) through edge engineering, highlighting their potential in the development of various quantum devices.

Interpenetrated Multinetwork Hybrid Aerogels by Layered Montmorillonite and One-Dimensional Hydroxyapatite Fibers for Heat and Fire Insulation.

It is of practical significance to develop aerogels with effective thermal insulation characteristics together with fireproof properties as well as high mechanical strength. Here, an interpenetrated multinetwork hybrid aerogel realizing thermal insulation, flame retardancy, and high compression modulus is demonstrated. Specifically, one-dimensional hydroxyapatite nanowires (HAP) played dual roles as the aerogel support skeleton to entangle with layered montmorillonite (MMT) each other to form a three-dimensional interpenetrated multinetwork structure and to optimize the thermal conductivity by adjusting the pore space in current HAP/MMT/PVA hybrid aerogels. Therefore, the interpenetrated multinetwork hybrid aerogels exhibit superior thermal insulation performance in room temperature (0.033 W m-1 K-1, 298 K, air conditions) and largely enhanced ultrahigh compression modulus (80 MPa). Moreover, the obtained hybrid aerogels also exhibit excellent flame retardancy and self-extinguishing smoke suppression properties (peak heat release rate and total smoke production as low as 92.44 kW m-2 and 0.1 m2, respectively), which is the outstanding interpenetrated multinetwork hybrid aerogel that has achieved synergistic improvement in heat and fire insulation and mechanical performance. Therefore, the interpenetrated multinetwork hybrid aerogels are promising candidates for efficient heat insulation, fire prevention, and mechanically robust applications.

Constrained patterning of orientated metal chalcogenide nanowires and their growth mechanism

One-dimensional metallic transition-metal chalcogenide nanowires (TMC-NWs) hold promise for interconnecting devices built on two-dimensional (2D) transition-metal dichalcogenides, but only isotropic growth has so far been demonstrated. Here we show the direct patterning of highly oriented Mo6Te6 NWs in 2D molybdenum ditelluride (MoTe2) using graphite as confined encapsulation layers under external stimuli. The atomic structural transition is studied through in-situ electrical biasing the fabricated heterostructure in a scanning transmission electron microscope. Atomic resolution high-angle annular dark-field STEM images reveal that the conversion of Mo6Te6 NWs from MoTe2 occurs only along specific directions. Combined with first-principles calculations, we attribute the oriented growth to the local Joule-heating induced by electrical bias near the interface of the graphite-MoTe2 heterostructure and the confinement effect generated by graphite. Using the same strategy, we fabricate oriented NWs confined in graphite as lateral contact electrodes in the 2H-MoTe2 FET, achieving a low Schottky barrier of 11.5 meV, and low contact resistance of 43.7 Ω µm at the metal-NW interface. Our work introduces possible approaches to fabricate oriented NWs for interconnections in flexible 2D nanoelectronics through direct metal phase patterning.

Platinum nanowires/MXene nanosheets/porous carbon ternary nanocomposites for in situ monitoring of dopamine released from neuronal cells

Dopamine is an important neurotransmitter in the body and closely related to many neurodegenerative diseases. Therefore, the detection of dopamine is of great significance for the diagnosis and treatment of diseases, screening of drugs and unraveling of relevant pathogenic mechanisms. However, the low concentration of dopamine in the body and the complexity of the matrix make the accurate detection of dopamine challenging. Herein, an electrochemical sensor is constructed based on ternary nanocomposites consisting of one-dimensional Pt nanowires, two-dimensional MXene nanosheets, and three-dimensional porous carbon. The Pt nanowires exhibit excellent catalytic activity due to the abundant grain boundaries and highly undercoordinated atoms; MXene nanosheets not only facilitate the growth of Pt nanowires, but also enhance the electrical conductivity and hydrophilicity; and the porous carbon helps induce significant adsorption of dopamine on the electrode surface. In electrochemical tests, the ternary nanocomposite-based sensor achieves an ultra-sensitive detection of dopamine (S/N = 3) with a low limit of detection (LOD) of 28 nM, satisfactory selectivity and excellent stability. Furthermore, the sensor can be used for the detection of dopamine in serum and in situ monitoring of dopamine release from PC12 cells. Such a highly sensitive nanocomposite sensor can be exploited for in situ monitoring of important neurotransmitters at the cellular level, which is of great significance for related drug screening and mechanistic studies.

Ultrahigh Bipolar Photoresponse in a Self-Powered Ultraviolet Photodetector Based on GaN and In/Sn-Doped Ga2O3 Nanowires pn junction.

Self-powered ultraviolet photodetectors with bipolar photoresponse have great potential in the fields of ultraviolet optical communication, all-optical controlled artificial synapses, high-resolution ultraviolet imaging equipment, and multiband photoelectric detection. However, the current low optoelectronic performance limits the development of such polar switching devices. Here, we construct a self-powered ultraviolet photodetector based on GaN and In/Sn-doped Ga2O3 (IGTO) nanowires (NWs) pn junction structure. This unique nanowire/thin film structure allows GaN and IGTO to dominate the absorption of light at different wavelengths, resulting in a highly bipolar photoresponse. The device has a responsivity of 2.04 A/W and a normalized detectivity of 7.18 × 1013 Jones at 254 nm and a responsivity of -2.09 A/W and a normalized detectivity of -7 × 1013 Jones at 365 nm, both at zero bias. In addition, it has an extremely high Ilight/Idark ratio of 1.05 × 105 and ultrafast response times of 2.4/1.9 ms (at 254 nm) and 5.7/5.2 ms (at 365 nm). These excellent properties are attributed to the high specific surface area of the one-dimensional nanowire structure and the abundant voids generated by the nanowire network to enhance the absorption of light, and the p-n junction structure enables the rapid separation and transfer of photogenerated electron-hole pairs. Our findings provide a feasible strategy for high-performance wavelength-controlled polarity switching devices.

Hexagonal Bipyramidal Mn3Ge5 Cluster and Its One-Dimensional Ferrimagnetic Sandwich Nanowire: Mn3Ge3 Rings as Structural Motifs.

Bipyramidal structures featuring planar rings serve as potential building blocks for one-dimensional (1D) nanostructures. Pure Ge atoms typically prefer to form three-dimensional rather than planar structures. Although a few-metal-doped bipyramids with pure Ge planar rings are predicted for constructing Ge-based 1D nanostructures, there is limited knowledge about those with both Ge and doped atoms on the same planar rings. Here, we report a hexagonal bipyramidal Mn3Ge5 cluster containing a Mn3Ge3 six-membered ring with the potential to construct a 1D germanium-based nanostructure. We investigated the structures and properties of Mn3Ge5-/0 using anion photoelectron spectroscopy and theoretical calculations. Mn3Ge5- has a C3v symmetric distorted hexagonal bipyramidal structure, while Mn3Ge5 has a C2v symmetric hexagonal bipyramidal structure. Chemical bonding analyses show that Mn3Ge5- could be considered as a [Mn3]V[Ge5]6- complex. First-principles calculations indicate that Mn3Ge5 may be used to construct a 1D ferrimagnetic [Mn3Ge5]∞ nanostructure.

Novel one-dimensional/two-dimensional composite films: Ag nanowires/ZnO nanowalls

We synthesized novel Ag nanowires/ZnO nanowalls composite films successfully, which integrated the beneficial characteristics of one-dimensional Ag nanowires and two-dimensional ZnO nanowalls. And the resulting Ag nanowires/ZnO nanowalls composite films exhibited outstanding photoelectric properties and enhanced light trapping abilities. The evenly distributed and interlaced Ag nanowires/ZnO nanowalls composite structures were clearly observed. By measuring the total transmittance (TT), diffuse transmittance (DT) and sheet resistance of the composite films, it can be seen that the haze value at 550 nm is 0.26, and the sheet resistance value is 42.5 Ω/sq. These indicated that the photoelectric and light trapping properties of the Ag nanowires/ZnO nanowalls composite films were enhanced significantly compared with those of the simplex films.