One-dimensional Differential Quadrature Method Research Articles

Theoretical and numerical analysis of free vibrations of piezoelectric circular plate reinforced with boron nitride

PurposeThe purpose of this research is to extract the natural frequencies of a circular plate containing a central hole reinforced with boron nitride nanotubes (BNNTs) and containing piezoelectric layers.Design/methodology/approachA unit cell shall be taken into account for the simulation of BNNT's volume fraction. A rectangular micromechanical model is used to obtain the mechanical properties of unit cell of piezoelectric fiber-reinforced composite (PFRC). The three-dimensional (3D) elasticity method is presented to provide the relationship between displacements and stresses. The one-dimensional differential quadrature method (1D-DQM) and the state-space methodology are combined to create the semi-analytical technique. The state-space approach is utilized to implement an analytical resolution in the thickness direction, and 1D-DQM is used to implement an approximation solution in the radial direction. The composite consists of a polyvinylidene fluoride (PVDF) matrix and BNNTs as reinforcement.FindingsA study on the PFRC is carried, likewise, the coefficients of its properties are obtained using a micro-electromechanical model known as the rectangular model. To implement the DQM, the plate was radially divided into sample points, each with eight state variables. The boundary situation and DQM are used to discretize the state-space equations, and the top and bottom application surface conditions are used to determine the natural frequencies of the plate. The model's convergence is assessed. Additionally, the dimensionless frequency is compared to earlier works and ABAQUS simulation in order to validate the model. Finally, the effects of the thickness, lateral wavenumber, boundary conditions and BNNT volume fraction on the annular plate's free vibration are investigated. The important achievements are that increasing the volume fraction of BNNTs increases the natural frequency.Originality/valueThe micromechanical “XY rectangle” model in PFRC along with the three-dimensional elasticity model is used in this literature to assess how the piezoelectric capabilities of BNNTs affect the free vibration of polymer-based composite annular plates under various boundary conditions.

The thermal and Pasternak foundation effect on the transient behaviors of the rectangular plate using a novel semi-analytical method

This paper carries out the transient behaviors of a thin rectangular plate considering different boundary conditions, Pasternak foundation, and thermal environment simultaneously. The governing differential equations of the system are derived by employing the Kirchhoff’s classical plate theory and Hamilton’s principle. This paper proposes a novel semi-analytical methodology, which integrates Laplace transform, the one-dimensional differential quadrature method, Fourier series expansion technique, and Laplace numerical inversion to analyze plates’ transient response. The proposed method can obtain dynamic response of the rectangular efficiently and accurately, which fills the gap of transient behaviors in semi-analytical method. A comparison between semi-analytical results and numerical solutions from the publication on this subject is presented to verify the method. Specifically, the results also agree well with the data generated by the Navier’s method. The convergence tests indicate that the semi-analytical algorithm is a quick convergence method. The effects of various variables, such as geometry, boundary conditions, temperature, and the coefficients of the Pasternak foundation, are further studied. The parametric studies show that geometry and temperature change are significant factors that affect the dynamic response of the plate.

Three-dimensional free vibration analysis of multi-directional functionally graded piezoelectric annular plates on elastic foundations via state space based differential quadrature method

The three-dimensional free vibration analysis of a multi-directional functionally graded piezoelectric (FGP) annular plate resting on two parameter (Pasternak) elastic foundations is investigated under different boundary conditions. The material properties are assumed to vary continuously along the radial and thickness directions and have exponent-law distribution. A semi-analytical approach named the state space based differential quadrature method (SSDQM) is used to provide an analytical solution along the thickness using the state space method (SSM) and an approximate solution along the radial direction using the one-dimensional differential quadrature method (DQM). The influence of the Winkler and shear stiffness of the foundation, the material property graded variations, and the circumferential wave number on the non-dimensional natural frequency of multi-directional FGP annular plates is studied.

Semi-analytical solution for three-dimensional transient response of functionally graded annular plate on a two parameter viscoelastic foundation

Abstract The three-dimensional transient analysis of functionally graded annular plates with arbitrary boundary conditions is carried out in this paper. The material properties of the FGM plate are assumed to vary smoothly in an exponential law along the thickness direction. The plate is assumed to rest on a two parameter viscoelastic foundation. A semi-analytical method, which integrates the state space method (SSM), Laplace transform and its inversion, as well as the one-dimensional differential quadrature method (DQM), is proposed to obtain the transient response of the plate. The state space method is used to obtain the analytical solution in the thickness direction. The differential quadrature method is employed to approximate the solution in the radial direction. The Laplace transform and the numerical inversion are used to obtain the solution in time domain. Numerical results show a good agreement between the response histories obtained by the present method and finite element method. The effects of the boundary conditions at the edges, the material graded index, the Winkler and shearing layer elastic coefficients, and the damping coefficient are studied. Numerical examples show that the peak response decreases as the material graded index, the Winkler and shearing layer elastic coefficients, and the damping coefficient increase. The results obtained in this paper can serve as benchmark data in further research.

3D elasticity solution for static analysis of functionally graded piezoelectric annular plates on elastic foundations using SSDQM

Three-dimensional elasticity solution for static analysis of functionally graded piezoelectric (FGP) annular plates with and without elastic foundations through using state-space based differential quadrature method (SSDQM) at different boundary conditions is presented in this paper. The material properties are assumed to have an exponent-law variation along the thickness. A semi-analytical approach which makes use of state-space method in thickness direction and one-dimensional differential quadrature method in radial direction is utilized to obtain the mechanical behavior of FGP annular plates. The state variables include a combination of electric potential, electric displacement, three mechanical displacement parameters and three stress parameters. Numerical results are given to demonstrate the convergency and accuracy of the present method. Both closed circuit and open circuit effects are studied and the influences of the Winkler and shearing layer elastic coefficients of the foundations, the material property graded index, radius, thickness, mechanical load and boundary conditions on the deflection response of the FGP annular plates are investigated. The new results can be used as a benchmark solutions for future researches.

Three-dimensional free vibration analysis of functionally graded piezoelectric annular plates via SSDQM and comparative modeling by ANN

This work deals with the study of the free vibration analysis of functionally graded piezoelectric (FGP) annular plates with different boundary conditions. In order to carry out the analysis, a state-space based differential quadrature method (SSDQM) and comparative behavior modeling by an artificial neural network (ANN) are used. The material properties are assumed to have an exponent-law variation through the thickness. A semi-analytical approach (SSDQM) which makes use of the state-space method in the thickness direction and the one-dimensional differential quadrature method in the radial direction is used to obtain the vibrational frequencies. The governing equations are based on 3D piezoelectricity. Numerical results are given to demonstrate the convergence and accuracy of the present method. Also an optimal ANN is selected, trained and tested by the obtained numerical results. In addition to the quantitative input parameters, types of the boundary conditions are also considered as a qualitative input in NN modeling. Eventually the results of SSDQM and ANN are compared and the influence of thickness of the annular plate, the material property graded index and the circumferential wave number on the non-dimensional natural frequency of annular FGP plates with different boundary conditions are investigated. The new results can be used as benchmark solutions for future studies.

Three-Dimensional Free Vibration Analysis of Functionally Graded Annular Plates on Elastic Foundations via State-Space Based Differential Quadrature Method

In this paper, free vibration of functionally graded annular plates on elastic foundations, based on the three-dimensional theory of elasticity, using state-space based differential quadrature method for different boundary conditions is investigated. The foundation is described by the Pasternak or two-parameter model. Assuming the material properties having an exponent-law variation along the thickness, a semi-analytical approach that makes use of state-space method in thickness direction and one-dimensional differential quadrature method in radial direction is used to obtain the vibration frequencies. Supposed state variables in the present method are different from what have been used for functionally graded annular plate so far. They are a combination of three displacement parameters and three stresses parameters. Numerical results are given to demonstrate the convergency and accuracy of the present method. In addition, the influences of the Winkler and shearing layer elastic coefficients of the foundations and some parameters are also investigated.

Three-dimensional free vibration analysis of functionally graded piezoelectric annular plates on elastic foundations

Three-dimensional free vibration analysis of functionally graded piezoelectric (FGPM) annular plates resting on Pasternak foundations with different boundary conditions is presented. The material properties are assumed to have an exponent-law variation along the thickness. A semi-analytical approach which makes use of state-space method in thickness direction and one-dimensional differential quadrature method in radial direction is utilized to obtain the influences of the Winkler and shearing layer elastic coefficients of the foundations on the non-dimensional natural frequencies of functionally graded piezoelectric annular plates. The analytical solution in the thickness direction can be acquired using the state-space method and approximate solution in the radial direction can be obtained using the one-dimensional differential quadrature method. Numerical results are given to demonstrate the convergency and accuracy of the present method. The influences of the material property graded index, circumferential wave number and thickness of the annular plate on the dynamic behavior are also investigated. Since three-dimensional free vibration analysis of FGPM annular plates on elastic foundations has not been implemented before, the new results can be used as benchmark solutions for future researches.

Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN

This paper deals with three-dimensional analysis of functionally graded annular plates through using state-space based differential quadrature method (SSDQM) and comparative behavior modeling by artificial neural network (ANN) for different boundary conditions. The material properties are assumed to have an exponent-law variation along the thickness. A semi-analytical approach which makes use of state-space method in thickness direction and one-dimensional differential quadrature method in radial direction is used to obtain the vibration frequencies. The state variables include a combination of three displacement parameters and three stress parameters. Numerical results are given to demonstrate the convergency and accuracy of the present method. Once the semi-analytical method is validated, an optimal ANN is selected, trained and tested by the obtained numerical results. In addition to the quantitative input parameters, support type is also considered as a qualitative input in NN modeling. Eventually the results of SSDQM and ANN are compared and the influence of thickness of the annular plate, material property graded index and circumferential wave number on the non-dimensional natural frequency of annular functionally graded material (FGM) plates with different boundary conditions are investigated. The results show that ANN can acceptably model the behavior of FG annular plates with different boundary conditions.

Elasticity solution of functionally graded circular and annular plates integrated with sensor and actuator layers using differential quadrature

Based on three-dimensional theory of elasticity axisymmetric static analysis of functionally graded circular and annular plates imbedded in piezoelectric layers is investigated using differential quadrature method (DQM). The plate has various edges boundary conditions and its material properties are assumed to vary in an exponential law with the Poisson ratio to be constant. This method can give an analytical solution along the graded direction using the state space method (SSM) and an effective approximate solution along the radial direction using the one-dimensional DQM. The method is validated by comparing numerical results with the results obtained in the literature. Both the direct and the inverse piezoelectric effects are investigated and the influence of piezoelectric layers on the mechanical behavior of plate is studied. The effects of the gradient index, thickness to radius ratio, and edges boundary conditions on the static behavior of FG circular and annular plates are investigated.

Semi-analytical solution for three-dimensional vibration of functionally graded circular plates

Based on the three-dimensional theory of elasticity and assuming that the mechanical properties of the materials vary continuously in the thickness direction and have the same exponent-law variations, the three-dimensional free and forced vibration analysis of functionally graded circular plate with various boundary conditions is achieved in this paper. A semi-analytical method, which makes use of the state space method and the one-dimensional differential quadrature method, is used to obtain the vibration frequencies and dynamic responses of circular plates. The analytical solution in the thickness direction can be acquired using the state space method and approximate solution in the radial direction can be obtained using the one-dimensional differential quadrature method. Numerical results are given to demonstrate the accuracy and superiority of the presented method. The influences of the material property graded index, the circumferential wave number and the forced frequencies on the dynamic behavior for different functionally graded circular plates are also studied.

Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges

Assuming that the mechanical properties of the materials vary continuously along the thickness direction and have the same exponential distribution, the free and forced vibration of functionally graded annular sectorial plates with simply supported radial edges and arbitrary circular edges is studied in this paper using a semi-analytical approach (SSM-DQM). The new SSM-DQM method can give an analytical solution along the graded direction using the state space method (SSM) and an effective approximate solution along the radial direction using the one-dimensional differential quadrature method (DQM). The accuracy and convergence of the presented method are demonstrated through numerical examples. For free vibration problems, the influences of various thickness ratios, radii ratios, sector angles, the material property graded indexes and circumferential wave numbers on the lowest non-dimensional frequency are investigated under different circular boundary conditions. And for forced vibration problems, the dynamic response of functionally graded annular sectorial plates under different forcing frequency is studied.

Imperfection sensitivity of the post-buckling behavior of higher-order shear deformable functionally graded plates

This paper investigates the sensitivity of the post-buckling behavior of shear deformable functionally graded plates to initial geometrical imperfections in general modes. A generic imperfection function that takes the form of the product of trigonometric and hyperbolic functions is used to model various possible initial geometrical imperfections such as sine type, local type, and global type imperfections. The formulations are based on Reddy’s higher-order shear deformation plate theory and von Karman-type geometric nonlinearity. A semi-analytical method that makes use of the one-dimensional differential quadrature method, the Galerkin technique, and an iteration process is used to obtain the post-buckling equilibrium paths of plates with various boundary conditions that are subjected to edge compressive loading together with a uniform temperature change. Special attention is given to the effects of imperfection parameters, which include half-wave number, amplitude, and location, on the post-buckling response of plates. Numerical results presented in graphical form for zirconia/aluminum (ZrO 2/Al) graded plates reveal that the post-buckling behavior is very sensitive to the L2-mode local type imperfection. The influences of the volume fraction index, edge compression, temperature change, boundary condition, side-to-thickness ratio and plate aspect ratio are also discussed.

Semi-analytical solution for nonlinear vibration of laminated FGM plates with geometric imperfections

This paper investigates the nonlinear vibration of imperfect shear deformable laminated rectangular plates comprising a homogeneous substrate and two layers of functionally graded materials (FGMs). A theoretical formulation based on Reddy's higher-order shear deformation plate theory is presented in terms of deflection, mid-plane rotations, and the stress function. A semi-analytical method, which makes use of the one-dimensional differential quadrature method, the Galerkin technique, and an iteration process, is used to obtain the vibration frequencies for plates with various boundary conditions. Material properties are assumed to be temperature-dependent. Special attention is given to the effects of sine type imperfection, localized imperfection, and global imperfection on linear and nonlinear vibration behavior. Numerical results are presented in both dimensionless tabular and graphical forms for laminated plates with graded silicon nitride/stainless steel layers. It is shown that the vibration frequencies are very much dependent on the vibration amplitude and the imperfection mode and its magnitude. While most of the imperfect laminated plates show the well-known hard-spring vibration, those with free edges can display soft-spring vibration behavior at certain imperfection levels. The influences of material composition, temperature-dependence of material properties and side-to-thickness ratio are also discussed.