On-resin Cyclization Research Articles

Total Synthesis and Bioactivity Evaluation of Hydrophobic Microcionamide-Inspired Peptides.

In this report, we describe the facile synthesis of four microcionamide-inspired peptides where the atypical 2-phenylethylenamine (2-PEA) functional group in the marine natural product, microcionamide A, was replaced with a similarly-aromatic but more easily incorporated tryptophan (Trp) residue. Compounds 1-4 were synthesized using a standard Fmoc-based solid-phase synthesis strategy followed by iodine-mediated on-resin cyclization for disulfide-bridged compounds 1-3. Compound 1 showed antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa, with minimum inhibitory concentrations (MICs) of 9.1 μM and 15 μM, respectively. The inactivity of alanine analogs 2-4 against these pathogens suggests that the N-terminal Val, the cyclic scaffold, the contiguous Ile residues, and consequently, the hydrophobicity of compound 1 are essential for antibacterial activity. Compound 1 also favorably exhibited minimal cytotoxicity against normal mammalian cell lines. In summary, we have synthesized an analog of microcionamide A where replacement of the 2-PEA moiety with a Trp residue retained the antibacterial activity and with favorably low cytotoxicity.

2-Methoxy-4-methylsulfinylbenzyl Alcohol as a Safety-Catch Linker for the Fmoc/tBu Solid-Phase Peptide Synthesis Strategy.

Fmoc and Boc group are the two main groups used to protect the α-amino function in Solid-Phase Peptide Synthesis (SPPS). In this regard, the use of the Mmsb linker allows the combination of these two groups. Peptide-O-Mmsb-Resin is stable to the piperidine and trifluoroacetic acid (TFA) treatment used to remove Fmoc and Boc, respectively. The peptide is detached in a two-step protocol, namely reduction of the sulfoxide to the sulfide with Me3SiCl and Ph3P, and then treatment with TFA. The advantage of this strategy has been demonstrated by the following: preparation of peptide with no diketopiperazine formation in sequences prone to this side reaction; on-resin cyclization without the concourse of common organic reagents such as Pd(0) but of difficult use in a biological laboratory; and on-resin disulfide formation in a total side-chain unprotected peptide. The use of Mmsb linker together with Msib (4-(methylsulfinyl)benzyl) and Msbh (4,4'-bis(methylsulfinyl)benzhydryl) described in the accompanying manuscript add a fourth dimension to the SPPS protecting group scheme.

Synthesis of [1-8-NαC]-zanriorb A1, alanine-containing analogues, and their cytotoxic and anti-inflammatory activity.

The synthesis of the orbitide[1-8-NαC]-zanriorb A1, isolated from the medicinal plant Zanthoxylum riedelianum, was investigated by solution-phase macrocyclization of a linear peptide and on-resin solid-phase macrocyclization with an acylsulfonamide safety-catch linker. The solution-phase route produced a mixture of proline rotamers, and the main component was assigned as the trans, cis rotamer, identical to the natural product. The on-resin cyclization was less successful, producing mainly a linear peptide, and minor cyclic products as rotameric mixtures. Although the natural product was reported to be significantly cytotoxic against Jurkat leukemia T cells, our synthetic peptides were inactive, suggesting the presence of other rotamers or impurities in the naturally isolated material. Additional analogues of zanriorb A1 were synthesized in which proline and glycine residues were replaced with alanine. While these analogues were not cytotoxic, several of them inhibited the production of nitric oxide in lipopolysaccharide (LPS)-stimulated macrophages. The most active compound, cyclic[Ala5,6,8 ]-zanriorb A1 had an IC50 of 22 μM and was more potent compared with the standard NG-monomethyl-l-arginine acetate (L-NMMA) with an IC50 of 98 μM, indicating their strong anti-inflammatory potential.

Three Methods for Peptide Cyclization Via Lactamization.

Lactamization is the key step in the synthesis of many compounds with macrocyclic structure. As the interest for these types of molecules grows in various fields such as drug discovery and nanomaterials, different methodologies to access them are being developed. Three different strategies to obtain cyclic peptides via lactamization are described in this chapter: solution-phase macrocyclization following solid-phase peptide synthesis (SPPS) of the linear precursor, SPPS and on-resin cyclization on the 2-chlorotrityl chloride (2-CTC) resin, and SPPS and on-resin cyclization by native chemical ligation on the amino-PEGA resin.

Total Synthesis of Analogs of A54145D and A54145A1 for Structure-Activity Relationship Studies.

The total solid-phase synthesis and in vitro biological activity of a series of analogs of A54145 factor D (A5D) and A54145 factor A1 (A5A1), two cyclic lipodepsipeptide antibiotics, are reported. An on-resin cyclization strategy was employed to prepare A5A1 analogs in which Thr4, the residue involved in the depsi (ester) bond, was replaced with either diaminopropionic acid (DAPA), (2S,3R)-diaminobutyric acid (DABA), or serine, effectively replacing the ring-closing ester bond with an amide linkage or with a primary ester. Antibacterial studies with these four analogs revealed that, contrary to a previous report, replacing the ester bond with an amide bond significantly reduces biological activity, and that both the ester bond and the methyl group at the γ-position of Thr4 are crucial for activity. Consistent with literature reports, we found that the single substitution of either 3-hydroxyasparagine (HOAsn) or 3-methoxyaspartate (MeOAsp) with Asn or Asp, respectively, in A5D is more detrimental to activity than the double substitution where both HOAsn and MeOAsp are replaced with Asn or Asp, respectively.

Cyclic Tetrapeptides from Nature and Design: A Review of Synthetic Methodologies, Structure, and Function.

Small cyclic peptides possess a wide range of biological properties and unique structures that make them attractive to scientists working in a range of areas from medicinal to materials chemistry. However, cyclic tetrapeptides (CTPs), which are important members of this family, are notoriously difficult to synthesize. Various synthetic methodologies have been developed that enable access to natural product CTPs and their rationally designed synthetic analogues having novel molecular structures. These methodologies include the use of reversible protecting groups such as pseudoprolines that restrict conformational freedom, ring contraction strategies, on-resin cyclization approaches, and optimization of coupling reagents and reaction conditions such as temperature and dilution factors. Several fundamental studies have documented the impacts of amino acid configurations, N-alkylation, and steric bulk on both synthetic success and ensuing conformations. Carefully executed retrosynthetic ring dissection and the unique structural features of the linear precursor sequences that result from the ring dissection are crucial for the success of the cyclization step. Other factors that influence the outcome of the cyclization step include reaction temperature, solvent, reagents used as well as dilution levels. The purpose of this review is to highlight the current state of affairs on naturally occurring and rationally designed cyclic tetrapeptides, including strategies investigated for their syntheses in the literature, the conformations adopted by these molecules, and specific examples of their function. Using selected examples from the literature, an in-depth discussion of the synthetic techniques and reaction parameters applied for the successful syntheses of 12-, 13-, and 14-membered natural product CTPs and their novel analogues are presented, with particular focus on the cyclization step. Selected examples of the three-dimensional structures of cyclic tetrapeptides studied by NMR, and X-ray crystallography are also included.

Structure-Function Studies of Polymyxin B Lipononapeptides.

The emerging threat of infections caused by highly drug-resistant bacteria has prompted a resurgence in the use of the lipodecapeptide antibiotics polymyxin B and colistin as last resort therapies. Given the emergence of resistance to these drugs, there has also been a renewed interest in the development of next generation polymyxins with improved therapeutic indices and spectra of action. We report structure-activity studies of 36 polymyxin lipononapeptides structurally characterised by an exocyclic FA-Thr2-Dab3 lipodipeptide motif instead of the native FA-Dab1-Thr2-Dab3 tripeptide motif found in polymyxin B, removing one of the positively charged residues believed to contribute to nephrotoxicity. The compounds were prepared by solid phase synthesis using an on-resin cyclisation approach, varying the fatty acid and the residues at position 2 (P2), P3 and P4, then assessing antimicrobial potency against a panel of Gram-negative bacteria, including polymyxin-resistant strains. Pairwise comparison of N-acyl nonapeptide and decapeptide analogues possessing different fatty acids demonstrated that antimicrobial potency is strongly influenced by the N-terminal L-Dab-1 residue, contingent upon the fatty acid. This study highlights that antimicrobial potency may be retained upon truncation of the N-terminal L-Dab-1 residue of the native exocyclic lipotripeptide motif found in polymyxin B. The strategy may aid in the design of next generation polymyxins.

An Efficient Chemical Synthesis of Lassomycin Enabled by an On-Resin Lactamisation–Off-Resin Methanolysis Strategy and Preparation of Chemical Variants

An efficient synthesis of the naturally occurring cyclic peptide lassomycin that bears a unique Asp–Gly isopeptide bond and a C-terminal methyl ester is described. On-resin cyclisation between 1Gly and side chain 8Asp and a subsequent solution-phase transesterification reaction afforded synthetic lassomycin in high yield. Several analogues were also prepared using the optimised methodology. None of the cyclised peptides, including the synthetic natural product, exhibited any significant activity against Mycobacterium tuberculosis. Comparison of the spectroscopic data for synthetic lassomycin with naturally occurring lassomycin concluded they were otherwise identical.

Recent progress of on-resin cyclization for the synthesis of clycopeptidomimetics

Cyclopeptidomimetics are class of cyclopeptides with unnatural linkage. They usually displayed unique constrained structure, enhanced proteolytic stability, and other drug-like character; and have been widely used in medicinal chemistry. Therefore, development of efficient strategies for the synthesis of cyclopeptidomimetics has received many attentions. On-resin cyclization strategy is one of the effective approaches developed to overcome the competing side reaction such as oligomerization and cyclooligomers occurred in solution cyclization. This approach took advantage of the “pseudo-dilution” effect to avoid these undesired by-products and greatly simplified the downstream product purification process. This review summarized the recent on-resin peptide cyclization strategies for the synthesis of cyclopeptidomimetics.

An alternative approach to the synthesis of peptides containing a cystathionine bridge

A new method for the synthesis of cystathionine containing cyclic peptides has been developed. Conventionally such systems are typically made with relatively late-stage on-resin cyclisation involving reaction between a chlorohomoalanine and cysteine residue. We offer a different approach involving early incorporation of a cystathionine residue through on-resin reaction between a cysteine residue and an N-Alloc iodohomoalanine cumyl ester. Subsequent cyclisation then involves amide bond formation. The success of this method was demonstrated by applying it to the synthesis of a cystathionine analogue of the disulfide bridge cyclic peptide, N-acetylated cyclic peptide c[CVDINNNC]-NH2, a biologically active iNOS binding epitope mimetic that binds tightly to the protein, SPSB2. Our method expands the repertoire of synthetic options towards the construction of cystathionine containing cyclic peptides.

A new strategy for total solid-phase synthesis of polymyxins

Polymyxin B and E are used as a ‘last line’ therapy for infections caused by serious Gram-negative bacteria due to their highly efficient antibacterial activity and nephrotoxicity. Many research groups have been performed on designing polymyxin analogues by chemical synthesis in order to decrease the nephrotoxicity and increase the antibacterial activity simultaneously. In this study, we developed a new strategy for total solid phase synthesis of polymyxins and their analogues. This method is achieved by anchoring the amine side chain of Dab9 on resin first and on-resin cyclization at last. Comparing to the mostly used chemical synthetic method for polymyxins which involves solid phase peptide synthesis followed by liquid phase cyclization, the method reported here is more convenient and efficient. Therefore, this new strategy may be a good replacement for current chemical synthetic method in designing polymyxin analogues.

Diaminodiacid-based solid-phase synthesis of all-hydrocarbon stapled α-helical peptides.

An alternative stapling strategy is described herein using Fmoc-solid phase peptide synthesis (SPPS) that employed pre-prepared diaminodiacid building blocks to introduce all-hydrocarbon staples into peptides by on-resin cyclization. Compared to unstapled native peptides, diaminodiacid-based stapled peptides exhibited an increased α-helicity ratio and stability toward protease. Moreover, the linkage length was found to affect the bioactivity of the peptides and their ability to inhibit the Wnt pathway. Therefore, the new stapling method provides an alternative way to obtain stapled peptides with tunable linkers of diaminodiacids.

Triazene as a powerful tool for solid-phase derivatization of phenylalanine containing peptides: zygosporamide analogues as a proof of concept.

A novel method for the synthesis of para-substituted phenylalanine containing cyclic peptides is described. The main features of this strategy are the coupling of phenylalanine to the solid support through its side chain via a triazene linkage, on-resin cyclization of the peptide chain, cleavage of the cyclic peptide from the resin under mild acidic conditions and further transformation of the resulting diazonium salt. The usefulness of this approach is exemplified by the solid-phase synthesis of some derivatives of the naturally occurring cyclic depsipeptide zygosporamide.

Glaser oxidative coupling on peptides: Stabilization of β-turn structure via a 1,3-butadiyne constraint

The Glaser–Eglinton reaction between either two C or N propargylglycine (Pra or NPra) amino acids, in the presence of copper(II), led to cyclic hexa- and octapeptides constrained by a butadiyne bridge. The on-resin cyclization conditions were analyzed and optimized. The consequences of this type of constraint on the three dimensional structure of these hexapeptides and octapeptides were analyzed in details by NMR and molecular dynamics. We show that stabilized short cyclic peptides could be readily prepared via the Glaser oxidative coupling either with a chiral (Pra), or achiral (NPra) residue. The 1,3-butadiyne cyclization, along with disulfide bridged and lactam cyclized hexapeptides expands the range of constrained peptides that will allow exploring the breathing of amino acids around a β-turn structure.

Cyclic pentapeptide analogs based on endomorphin-2 structure: Cyclization studies using liquid chromatography combined with on-line mass spectrometry and tandem mass spectrometry

The cyclization of linear analogs based on endomorphin-2 structure, Tyr/Dmt-d-Lys-Phe-Phe-Asp-NH2 and Tyr/Dmt-d-Cys-Phe-Phe-Cys-NH2 (where Dmt=2′,6′-dimethyltyrosine), resulting in obtaining lactam or disulfide derivatives, was studied using liquid chromatography combined with on-line mass spectrometry (LC–MS) and tandem mass spectrometry (LC–MS/MS). In case of cyclization via an amide bond, the formation of the cyclic monomers, cyclic but not linear dimers and even traces of cyclic trimers was observed. Disulfide bridge containing peptides was obtained by the solid-phase synthesis of the linear sequences, followed by either in-solution or on-resin cyclization. In case of the in-solution cyclization, the expected cyclic monomers were the only products. When oxidation of the cysteine residues was performed when the peptides were still on the resin, cyclic monomer and two cyclodimers, parallel and antiparallel, were found. Digestion of the isolated cyclodimers with α-chymotrypsin allowed for their unambiguous identification. The comparison of the cyclic monomer/dimer ratios for analogs with Tyr versus Dmt in position 1 revealed that the presence of the exocyclic Dmt favored formation of the cyclic monomer, most likely due to the increased steric bulk of this amino acid side-chain as compared with Tyr.

Global Analysis of Peptide Cyclization Efficiency

Cyclic peptides are of considerable interest in drug discovery and nanotechnology. However, macrocyclization of peptides and other compounds has often been perceived as synthetically challenging and the cyclization yields are affected by several factors including the ring size, peptide sequence, and the reaction conditions. Through the screening of combinatorial peptide libraries, we analyzed the cyclization efficiency of >2 million peptide sequences to determine the effect of ring size, peptide sequence, and solvent on the backbone (N-to-C) cyclization of peptides. Our results show that on-resin cyclization of medium- and large-sized rings (cyclohexapeptides and above) with PyBOP is essentially quantitative for ≥ 99.96% of the sequences, with small amounts of dimer formation observed for <4% of these sequences. Cyclization of small rings (cyclotetrapeptides and cyclopentapeptides) is considerably more difficult and accompanied by significant cyclic dimer formation. Peptides that are difficult to cyclize are generally rich in Lys(Boc) and Arg(Pbf) residues as well as sterically hindered residues [e.g., Thr(tBu)] at the N-terminus. The majority of these difficult sequences can be cyclized to completion by the addition of aqueous additives to the cyclization reaction.

MRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid-phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on-resin solid-phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide--cyclo[Link-M-WFRHY-K]--as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link-M-WFRHY-K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link-M-WFRHY-K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link-M-WFRHY-K] is an attractive candidate for developing a cost-effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest.

Synthesis of trifunctional cyclo-β-tripeptide templates.

The concept of template-assembled synthetic proteins (TASP) describes a central scaffold that predefines the three dimensional structure for diverse molecules linked to this platform. Cyclic β-tripeptides are interesting candidates for use as templates due to their conformationally defined structure, stability to enzymatic degradation, and ability to form intermolecular stacked tubular structures. To validate the applicability of cyclic β-tripeptides within the TASP concept, an efficient synthesis of the cyclopeptide with orthogonal functionalization of the side chains is desired. A solid-phase-supported route with on-resin cyclization is described, employing the aryl hydrazide linker cleavable by oxidation. An orthogonal protection-group strategy allows functionalization of the central cyclic β-tripeptide with up to three different peptide fragments or fluorescent labels.

Design and synthesis of unprecedented cyclic γ-AApeptides for antimicrobial development

Antimicrobial drug resistance is one of the greatest threats facing mankind. Antimicrobial peptides (AMPs) can potentially circumvent drug resistance, probably through a bacterial membrane-disruption mechanism. However, they suffer from low in vivo stability, potential immunogenicity, and difficulty in optimization. The development of antimicrobial peptidomimetics is therefore an emerging research area as they avoid the potential disadvantages of AMPs. Cyclic peptidomimetics are of significant interest since constraints induced by cyclization are expected to further improve their antimicrobial activity. Nonetheless, the report of cyclic oligomeric peptidomimetics for antimicrobial development is rare. Herein, for the first time, we report the design and synthesis of cyclic γ-AApeptides via an on-resin cyclization. These cyclic γ-AApeptides are potent and broad-spectrum active against fungus and multi-drug resistant Gram-positive and Gram-negative bacterial pathogens. Our results demonstrate the potential of cyclic γ-AApeptides as a new class of antibiotics to circumvent drug resistance by mimicking the bactericidal mechanism of AMPs. Meanwhile, the facile synthesis of cyclic γ-AApeptides may further expand the applications of γ-AApeptides in biomedical sciences.

Click to Join Peptides/Proteins Together

Copper(I) is able to catalyze Huisgen 1,3-dipolar cycloaddition in a "click" fashion. This copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction presents excellent chemoselectivity and occurs over a wide-range of reaction conditions. It shows tolerance to variation in both pH and solvent polarity, thereby facilitating the ligation of peptides and proteins to produce peptidomimetics and synthetic proteins. In addition, the only product formed is a 1,4-disubstituted-1,2,3-triazole moiety, in many aspects resembling the natural peptide bond, including hydrogen-bonding capability, planarity, distance between the 1 and 4 substituents, and conformational restriction of the peptide backbone; thus the triazole-backbone-modified peptide, in which a triazole replaces the amide bond, may be anticipated to present a secondary structure similar to that of its natural counterpart. This Focus Review describes the scope and applications of copper(I)-catalyzed alkyne–azide cycloaddition in synthetic peptide/protein chemistry.