Online Signature Research Articles

Correlation Fuzzy measure of multivariate time series for signature recognition.

Distinguishing different time series, which is determinant or stochastic, is an important task in signal processing. In this work, a correlation measure constructs Correlation Fuzzy Entropy (CFE) to discriminate Chaos and stochastic series. It can be employed to distinguish chaotic signals from ARIMA series with different noises. With specific embedding dimensions, we implemented the CFE features by analyzing two available online signature databases MCYT-100 and SVC2004. The accurate rates of the CFE-based models exceed 99.3%.

Online Signature Classification Based on Dynamic Nature of Features Selection Framework

Online Signature Classification Based on Dynamic Nature of Features Selection Framework

Relative position matrix and multi-scale feature fusion for writer-independent online signature verification

Online signature verification (OSV) is widely used in finance, law and other fields, and is one of the important research projects on biological characteristics. However, its data set has a small scale and has high requirements for generalization of certification models. Therefore, how to overcome these problems is of great value to improve the practicality and security of online handwriting signature technology. We propose a writer-independent online handwritten signature verification method, which adopts the relative position matrix method to convert the traditional temporal features into images for processing. This method enriched the features of the signatures, serving the purpose of data augmentation. Then two-dimensional multi-scale feature fusion based Siamese neural network (2D-MFFnet) is built for representing and learning the importance of each channel adaptively combined with the attention mechanism. Finally, a temporal convolutional network is designed to construct the classifier. The results illustrate that compared with traditional time series models, the algorithm has reduced the equal error rate by at least 2.52 % on the open datasets MCYT-100 and SVC2004 task2.

Kruskal Wallis and mRMR Feature Selection based Online Signature Verification System using Multiple SVM and KNN

Signature verification is a very important research area. Signature has been widely accepted as a person authentication method for centuries. It is mostly used in financial transactions, document authentication and agreements. It is more susceptible to being forged than any other biometrics. Online signature verification is used in real-time applications like e-commerce, online resource access, online financial transactions, physical access into a restricted area and many more. In order to achieve high efficiency in online signature verification systems, feature extraction and feature selection play a significant role. A suitable signature verification system is needed to prevent forgery and accept the genuine signer. We have extracted 30 global features from all 40 signers for verification. Here, k fold cross-validation technique is used to enhance the model's performance on unseen data. User-specific feature selection and ranking are done using Kruskal Wallis and Minimum Redundancy Maximum Relevance (mRMR) algorithm to hunt which performs better in our case. Kruskal-Wallis method tests if two or more classes have an equal median and gives the value of P based on which discriminative features are selected, whereas the mRMR algorithm ranks the whole feature set according to its importance. It evaluates the relevance of a feature and penalizes redundancy. Finally, multiple SVM and KNN classifiers are trained and tested with various selected features using Kruskal Wallis and mRMR to determine which combination performs best for the online signature verification system. Our model is trained, validated and tested on the SVC 2004 Task 1 database, which consists of skill forgery signatures. Here, one to one verification is done using each user's genuine and skill forgery signatures, which is the hardest to detect. Best average testing accuracy achieved in our case is 90.25% using Weighted KNN and Kruskal Wallis selected 15 features.

Inf-Att-OSVNet: information theory based feature selection and deep attention networks for online signature verification

Inf-Att-OSVNet: information theory based feature selection and deep attention networks for online signature verification

A Comparative Analysis of Machine Learning Algorithms for Online Signature Recognition

A Comparative Analysis of Machine Learning Algorithms for Online Signature Recognition

LEGAL PROTECTION FOR USER STUDENTS E-MONEY AS A NON-CASH PAYMENT TOOL IN THE ISLAMIC BOARDING SCHOOL ENVIRONMENT

Electronic money, or what is known as e-money according to the Bank Indonesia Regulation Number 20/6/PBI/2018 concerning Electronic Money, is a faster transaction process when compared to cash because there is no need for online authorization, signature or PIN, and balance e-money can be filled in from various means provided by the publisher. This research evaluates the legal protection for students who use e-money as a non-cash payment in the Islamic boarding school environment.

Online Signature Biometrics for Mobile Devices.

This paper addresses issues concerning biometric authentication based on handwritten signatures. Our research aimed to check whether a handwritten signature acquired with a mobile device can effectively verify a user's identity. We present a novel online signature verification method using coordinates of points and pressure values at each point collected with a mobile device. Convolutional neural networks are used for signature verification. In this paper, three neural network models are investigated, i.e., two self-made light SigNet and SigNetExt models and the VGG-16 model commonly used in image processing. The convolutional neural networks aim to determine whether the acquired signature sample matches the class declared by the signer. Thus, the scenario of closed set verification is performed. The effectiveness of our method was tested on signatures acquired with mobile phones. We used the subset of the multimodal database, MobiBits, that was captured using a custom-made application and consists of samples acquired from 53 people of diverse ages. The experimental results on accurate data demonstrate that developed architectures of deep neural networks can be successfully used for online handwritten signature verification. We achieved an equal error rate (EER) of 0.63% for random forgeries and 6.66% for skilled forgeries.

Compactnet: a lightweight convolutional neural network for one-shot online signature verification

Compactnet: a lightweight convolutional neural network for one-shot online signature verification

An Efficient, Fast and Accurate Online Signature Verification Using Blended Feature Vector and Deep Learning

Online signature verification is one of the biometric authentication techniques. Online signature verification reduces the human error that may occur due to physical signature verification. Many researchers have provided a method of online signature verification still there is a scope for improvement. In this paper, a novel blended feature vector (BFV) is formed by combining two feature vectors. The first of these feature vectors is formed using a raw online signature database and the other feature vector is formed of the features extracted from the grayscale images obtained from the signature database. The algorithm makes use of the probability distribution of the features to provide a feature vector that results in an enhanced verification system. Two online signature databases, namely SVC2004 and ATVS-SSig are used. BFV is used to train the proposed mixed sequence deep neural network (MS-DNN). The use of a blended feature vector in the training of MS-DNN, instead of a whole online signature database, improves the training time of deep neural network to a great extent. This reduction in training time might be useful for new user registration. The performance parameters considered are validation efficiency and equal error rate. Results are compared with the existing state of technology and the comparison shows that the use of a blended feature vector as a classification vector improves the validation efficiency (99.5%) and also there is an improvement in the verification success rate in terms of equal error rate (EER 1.5%) as compared to the existing research.

Spatio-temporal trajectory data modeling for fishing gear classification

International Organizations urge the protection of our oceans and their ecosystems due to their immeasurable importance to humankind. Since illegal fishing activities, commonly known as IUU fishing, cause irreparable damage to these ecosystems, concerned organisms are pushing to detect and combat IUU fishing practices. The automatic identification system allows to locate the position and trajectory of fishing vessels. In this study we address the task of detecting vessels’ fishing gears based on the trajectory behavior defined by GPS position data, a useful task to prevent the proliferation of IUU fishing practices. We present a new database including trajectories that span 7 different fishing gears and analyze these as in a time sequence analysis problem. We leverage from feature extraction techniques from the online signature verification domain to model vessel trajectories, and extract relevant information in the form of both local and global feature sets. We show how, based on these sets of features, the kinematics of vessels according to different fishing gears can be effectively classified using common supervised learning algorithms with accuracies up to 90%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$90\\%$$\\end{document}. Furthermore, motivated by the concerns raised by several organizations on the adverse impact of bottom trawling on marine biodiversity, we present a binary classification experiment in which we were able to distinguish this kind of fishing gear with an accuracy of 99%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$99\\%$$\\end{document}. We also illustrate in an ablation study the relevance of factors such as data availability and the sampling period to perform fishing gear classification. Compared to existing works, we highlight these factors, especially the importance of using sampling periods in the order of minutes instead of hours.

Research Paper on Blockchain Technology

Blockchain is a Peer to Peer software technology that protects the integrity of a digital piece of information. It was invented to create the alternative currency Bitcoin but may be used for other cryptocurrencies, online signature services, voting systems and many other applications. In this video we explain how it works and what makes it special. Everyone uses paper money. When you get a 10 dollar bill you trust that it's not fake. If instead someone sent you an email saying "here's 10 dollars" you probably wouldn’t trust it. But when we "transfer money", use an ATM or pay with a deposit card that's pretty much exactly what we do. We're sending money in a digital message. To make sure no one's cheating or sending money they don't have, these “messages” go through a few trusted banks that keep a record of everything. They know how much money everyone has and deduct it properly for every transaction. Now But this has become expensive when there is a millions of transactions around towards the world every minute. The Economist estimates that banks charged us more than 1.7 trillion dollars to process these payments in 2014. That’s about 2% of the entire world economy! With blockchain we can save a lot of this cost because it lets us send money just like sending an email. Alternately sending a lot of payment information through a few servers, blockchain uses thousands of personal computers on the internet. All transactions are copied and cross checked between every computer in a system wide accounting book called the ledger, which becomes very safe at scale. Blockchain doesn’t just allow us to create safe money online, it lets us protect any piece of digital information. This could be online Identity cards, voter ballots, contracts and many other “legal instruments”, bringing bureaucracy into the 21st century.

Handwritten online signature verification and Forgery Detection for Online Handwritten Signature using Hybrid Wavelet Transform-1 with HMM classifier

Online signature verification employs a distinctive biometric trait by utilizing both static and dynamic features extracted from 2D signature images. A hybrid wavelet transform, denoted as HWT-1 with a size of 256, is formed through the Kronecker product of two orthogonal transforms, such as DCT, DHT, Haar, Hadamard, and Kekre, each with sizes 4 and 64. This HWT facilitates signal analysis at both global and local levels, akin to traditional wavelet transforms. Specifically, HWT-1 processes the 256 samples of online handwritten signatures, yielding 128 samples that constitute the feature vectors for signature verification and forgery detection. These feature vectors are then inputted into the Left-Right and Ergodic Hidden Markov Model (HMM) classifiers for further analysis. The HMMs are trained using 10 randomly selected genuine signature samples and subsequently tested with the remaining 10 genuine signatures and 20 forged signatures from the SVC 2004 signature database, repeating this process 20 times to compute average values. Among all possible combinations of HWT-1 utilizing DCT, DHT, Haar, Hadamard, and Kekre transforms for the Left-Right HMM model, the combination of DCT 4 and Haar 64 demonstrates the best performance with a False Rejection Rate (FRR) and False Acceptance Rate (FAR) of 1.05% and 0.99%, respectively, at state 3. Similarly, considering all feasible combinations of HWT-1 for the Ergodic HMM model, the combination of DCT 4 and Kekre 64 yields the optimal performance with an FRR and FAR of 1.24% and 1.33%, respectively, at state 3.

Handwritten Online Signature Verification and Forgery Detection Using Hybrid Wavelet Transform-2 with HMM Classifier

Online signature verification stands out as a distinctive biometric feature, offering both static and dynamic attributes within 2D signature images. A Hybrid Wavelet Transform-2 (HWT-2) with a size of 256 is constructed by employing the Kronecker product of two orthogonal transforms: DCT, DHT, Haar, Hadamard, and Kekre, each with sizes of 4 and 64. The HWT enables the analysis of signals at both global and local levels, akin to wavelet transforms. HWT-2 is applied to 256 samples of online handwritten signatures, and the first 128 samples of the output are utilized as feature vectors for the verification and forgery detection of online handwritten signatures. These feature vectors are inputted into Left-Right and Ergodic Hidden Markov Model (HMM) classifiers for analysis. The HMMs are trained using 10 randomly selected genuine signature samples, and subsequently tested on the remaining 10 genuine signatures and 20 forged signatures from 40 users of the SVC 2004 signature database. This process is repeated 20 times, and the average values are computed. Among all possible combinations of HWT-2 using DCT, DHT, Haar, Hadamard, and Kekre transforms for the Left-Right HMM model, the combination of DCT 4 and DHT 64 demonstrates the best performance, with False Rejection Rate (FRR) and False Acceptance Rate (FAR) values of 3.96% and 1.48%, respectively, for state 5. Similarly, for the Ergodic HMM model, the combination of DCT 4 and DHT 64 exhibits the best performance, with FRR and FAR values of 1.10% and 2.88%, respectively, for state 5. These results indicate that combinations of HWT-2 outperform individual orthogonal transforms, and further, that HWT-2 combinations within the Ergodic HMM model offer superior performance compared to the Left-Right HMM model.

Comparative Analysis of Handwritten Online Signature Verification and Forgery Detection Using Hybrid Wavelet Transform-1 and 2 with HMM Classifier

Online signature verification is a unique biometric feature. Provides static and dynamic features for 2D signature images. Hybrid wavelet transform -1 and 2 (HWT-1 and HWT-2) of size 256 is created using the Kronecker product of two orthogonal transforms such as DCT, DHT, Haar, Hadamard and Kekre with size 4 and 64. HWT has the ability to analyze signals such as wavelet transform at global and local levels. HWT-1 and HWT-2 are used for the 256 samples of the online Handwritten signature and the first 128 samples of the output are used as feature vectors for handwritten online signature verification and forgery detection. This feature vector is given to the Left-Right and Ergodic modelled HMM classifier for analysis. HMM is trained using 10 randomly chosen genuine signature samples and is used to test remaining 10 genuine signatures and 20 forged signatures of 40 users of SVC 2004 signature database. This process is iterated 20 times and then average values are calculated. Considering all the possible combination of HWT-1 and HWT-2 for DCT, DHT, Haar, Hadamard and Kekre transform for Left Right HMM model, DCT 4 Haar 64 HWT-1 offers best performance of FRR, FAR of 1.05%, 0.99% respectively for state 3. Considering all the possible combination of HWT-1 and HWT-2 for DCT, DHT, Haar, Hadamard and Kekre transform for Ergodic HMM model, DCT 4 DHT 64 offers best performance of FRR, FAR of 1.10%, 2.88% respectively for state 5. We conclude that comparing HWT-1 and HWT-2 combinations for Left Right and Ergodic HMM model, HWT-1 for Left Right model offer better performance.

Enhancing Recognition in Multimodal Biometric Systems: Score Normalization and Fusion of Online Signatures and Fingerprints

Multimodal biometrics employs multiple modalities within a single system to address the limitations of unimodal systems, such as incomplete data acquisition or deliberate fraud, while enhancing recognition accuracy. This study explores score normalization and its impact on system performance. To fuse scores effectively, prior normalization is necessary, followed by a weighted sum fusion technique that aligns impostor and genuine scores within a common range. Experiments conducted on three biometric databases demonstrate the promising efficacy of the proposed approach, particularly when combined with Empirical Modal Decomposition (EMD). The fusion system exhibits strong performance, with the best outcome achieved by merging the online signature and fingerprint modalities, resulting in a normalized Min-Max score-based Equal Error Rate (EER) of 1.69%.

DWSCNN Online Signature Verification Algorithm Based on CAE-MV Feature Dimensionality Reduction

DWSCNN Online Signature Verification Algorithm Based on CAE-MV Feature Dimensionality Reduction

Ghost Module Based Residual Mixture of Self-Attention and Convolution for Online Signature Verification

Ghost Module Based Residual Mixture of Self-Attention and Convolution for Online Signature Verification

Online Handwritten Signature Verification Method Based on Uni-Feature Correlation Coefficient between Signatures

Online handwritten signature verification is a crucial direction of research in the field of biometric recognition. Recently, many studies concerning online signature verification have attempted to improve performance using multi-feature fusion. However, few studies have provided the rationale for selecting a certain uni-feature to be fused, and few studies have investigated the contributions of a certain uni-feature in the multi-feature fusion process. This lack of research makes it challenging for future researchers in related fields to gain inspiration. Therefore, we use the uni-feature as the research object. In this paper, the uni-feature is one of the X and Y coordinates of the signature trajectory point, pen pressure, pen tilt, and pen azimuth feature. Aiming to solve the unequal length of feature vectors and the low accuracy of signature verification when using uni-features, we innovatively introduced the idea of correlation analysis and proposed a dynamic signature verification method based on the correlation coefficient of uni-features. Firstly, an alignment method of two feature vector lengths was proposed. Secondly, the correlation coefficient calculation formula was determined by analyzing the distribution type of the feature data, and then the correlation coefficient of the same uni-feature between the genuine signatures or between the genuine and forged signatures was calculated. Finally, the signature was verified by introducing a Gaussian density function model and combining it with the signature verification discrimination threshold. Experimental results showed that the proposed method could improve the performance of dynamic signature verification based on uni-features. In addition, the pen pressure feature had the best signature verification performance, with the highest signature verification accuracy of 93.46% on the SVC 2004 dataset.

Synergy of on-surface and in-air trajectories: Exploratory analysis of forensic online signatures implementing lessons learned from biometrics

With the increased use of digital devices, forensic document examiners (FDEs) encounter increasing number of dynamic or online signatures during their physical examinations. This shift expands the possibility of examinations and creates new challenges for FDEs. As such, FDEs require new examination skills using data science-based analyses with artificial intelligence and machine-learning techniques. In recent years, automated signature verification has gained significant interest in biometric research and could be useful in forensic investigations. However, the use of complex black-box systems inconveniencing FDEs in explaining the rationale behind their final assessment, especially when dealing with limited signature samples and various types of forged signatures. Therefore, a new forensic method is needed to assist FDEs’ analysis. To tackle these challenges and incorporate lessons learned from biometrics into forensics, this study proposes a novel forensic online signature analysis method. The proposed method uses a single-template strategy based on recent scientific findings in biometrics while updating the strategy for forensic use. This strategy creates a mean-template set from known signature samples that serve as a writer’s signature master pattern. Consequently, FDEs can evaluate intra-writer and inter-item variations using the mean-template set and a questioned signature. Furthermore, to take advantage of recent digital devices, we focused on both on-surface and in-air trajectories of online signatures, which could improve the discriminative power because in-air trajectories are invisible for imposters. Finally, we demonstrate the effectiveness and applicability of the proposed method in a forensic scenario using a public forensic online signature dataset.