On-line Separator Research Articles

Efficient Tuning of an Isotope Separation Online System Through Safe Bayesian Optimization with Simulation-Informed Gaussian Process for the Constraints

Optimizing process outcomes by tuning parameters through an automated system is common in industry. Ideally, this optimization is performed as efficiently as possible, using the minimum number of steps to achieve an optimal configuration. However, care must often be taken to ensure that, in pursuing the optimal solution, the process does not enter an “unsafe” state (for the process itself or its surroundings). Safe Bayesian optimization is a viable method in such contexts, as it guarantees constraint fulfillment during the optimization process, ensuring the system remains safe. This method assumes the constraints are real-valued and continuous functions. However, in some cases, the constraints are binary (true/false) or classification-based (safe/unsafe), limiting the direct application of safe Bayesian optimization. Therefore, a slight modification of safe Bayesian optimization allows for applying the method using a probabilistic classifier for learning classification constraints. However, violation of constraints may occur during the optimization process, as the theoretical guarantees of safe Bayesian optimization do not apply to discontinuous functions. This paper addresses this limitation by introducing an enhanced version of safe Bayesian optimization incorporating a simulation-informed Gaussian process (GP) for handling classification constraints. The simulation-informed GP transforms the classification constraint into a piece-wise function, enabling the application of safe Bayesian optimization. We applied this approach to optimize the parameters of a computational model for the isotope separator online (ISOL) at the MYRRHA facility (Multipurpose Hybrid Research Reactor for High-Tech Applications). The results revealed a significant reduction in constraint violations—approximately 80%—compared to safe Bayesian optimization methods that directly learn the classification constraints using Laplace approximation and expectation propagation. The sensitivity to the accuracy of the simulation model was analyzed to determine the extent to which it is advantageous to use the proposed method. These findings suggest that incorporating available information into the optimization process is valuable for reducing the number of unsafe outcomes in constrained optimization scenarios.

Production and purification of molecular 225Ac at CERN-ISOLDE

AbstractThe radioactive nuclide 225Ac is one of the few promising candidates for cancer treatment by targeted-$$\alpha$$ α -therapy, but worldwide production of 225Ac faces significant limitations. In this work, the Isotope Separation On-Line method was used to produce actinium by irradiating targets made of uranium carbide and thorium carbide with 1.4-GeV protons. Actinium fluoride molecules were formed, ionized through electron impact, then extracted and mass-separated as a beam of molecular ions. The composition of the mass-selected ion beam was verified using time-of-flight mass spectrometry, $$\alpha$$ α - and $$\gamma$$ γ -ray decay spectrometry. Extracted quantities of $$^{225}\textrm{Ac}^{19}\textrm{F}_2^{+}$$ 225 Ac 19 F 2 + particles per $$\upmu$$ μ C of incident protons were $$3.9(3)\times 10^7$$ 3.9 ( 3 ) × 10 7 from a uranium carbide target and $$4.3(4)\times 10^7$$ 4.3 ( 4 ) × 10 7 for a thorium carbide target. Using a magnetic mass separator, the long-lived contamination 227 Ac is suppressed to $$<5.47\times 10^{-7}$$ < 5.47 × 10 - 7 (95% confidence interval) with respect to 225Ac by activity. Measured rates scale to collections of 108 kBq$$\upmu$$ μ A$$^{-1}$$ - 1 h$$^{-1}$$ - 1 of directly produced $$^{225}\textrm{Ac}^{19}\textrm{F}_2^{+}$$ 225 Ac 19 F 2 + .

High-Precision Mass Measurements of Neutron Deficient Silver Isotopes Probe the Robustness of the N=50 Shell Closure.

High-precision mass measurements of exotic ^{95-97}Ag isotopes close to the N=Z line have been conducted with the JYFLTRAP double Penning trap mass spectrometer, with the silver ions produced using the recently commissioned inductively heated hot cavity catcher laser ion source at the Ion Guide Isotope Separator On-Line facility. The atomic mass of ^{95}Ag was directly determined for the first time. In addition, the atomic masses of β-decaying 2^{+} and 8^{+} states in ^{96}Ag have been identified and measured for the first time, and the precision of the ^{97}Ag mass has been improved. The newly measured masses, with a precision of ≈1 keV/c^{2}, have been used to investigate the N=50 neutron shell closure, confirming it to be robust. Empirical shell-gap and pairing energies determined with the new ground-state mass data are compared with the state-of-the-art abinitio calculations with various chiral effective field theory Hamiltonians. The precise determination of the excitation energy of the ^{96m}Ag isomer in particular serves as a benchmark for abinitio predictions of nuclear properties beyond the ground state, specifically for odd-odd nuclei situated in proximity to the proton dripline below ^{100}Sn. In addition, density functional theory calculations and configuration-interaction shell-model calculations are compared with the experimental results. All theoretical approaches face challenges to reproduce the trend of nuclear ground-state properties in the silver isotopic chain across the N=50 neutron shell and toward the proton dripline.

Design and commissioning of the ISOL beamline at the RAON facility

The Rare isotope Accelerator complex for ON-line experiment (RAON) located at the Daejeon site of the Institute for Basic Science (IBS) is the first Radioactive Isotope (RI) beam facility in Korea. The RAON facility employs an in-flight method using RI beams produced using an Isotope Separator On-Line (ISOL) method to explore unstable nuclei in uncharted regions. A high-power ISOL facility is critical for providing the required high-quality, intense RI beams. The design, construction, and installation of the ISOL system have been completed, and the beam transport line commissioning with stable isotope beams has been conducted. As a result, all requirements, such as the transmission and the mass-resolving power, for the beamlines were satisfied, and the beams from the Target Ion Source (TIS) were transported to the end of the ISOL beamline, which is the entrance to the superconducting linear accelerator system. The ISOL beamline is now ready for the transport of RI beams.

Precision mass measurements in the zirconium region pin down the mass surface across the neutron midshell at N = 66

Precision mass measurements of 104Y, 106Zr, 104,104m,109Nb, and 111,112Mo have been performed with the JYFLTRAP double Penning trap mass spectrometer at the Ion Guide Isotope Separator On-Line facility. The order of the long-lived states in 104Nb was unambiguously established. The trend in two-neutron separation energies around the N=66 neutron midshell appeared to be steeper with respect to the Atomic Mass Evaluation 2020 extrapolations for the 39Y and 40Zr isotopic chains and less steep for the 41Nb chain, indicating a possible gap opening around Z=40. The experimental results were compared to the BSkG2 model calculations performed with and without vibrational and rotational corrections. All of them predict two low-lying minima for 106Zr. While the unaltered BSkG2 model fails to predict the trend in two-neutron separation energies, selecting the more deformed minima in calculations and removing the vibrational correction, the calculations are more in line with experimental data. The same is also true for the 21+ excitation energies and differences in charge radii in the Zr isotopes. The results stress the importance of improved treatment of collective corrections in large-scale models and further development of beyond-mean-field techniques.

Detailed structure of Sn131 populated in the β decay of isomerically purified In131 states

The excited structure of the single-hole nucleus Sn131 populated by the β− decay of In131 was investigated in detail at the ISOLDE facility at CERN. This new experiment took advantage of isomeric purification capabilities provided by resonant ionization, making it possible to independently study the decay of each isomer for the first time. The position of the first-excited νh11/2 neutron-hole state was confirmed via an independent mass spectroscopy experiment performed at the Ion Guide Isotope Separator On-Line facility at the University of Jyväskylä. The level scheme of Sn131 was notably expanded with the addition of 31 new γ-ray transitions and 22 new excited levels. The γ-emitting excited levels above the neutron separation energy in Sn131 were investigated, revealing a large number of states, which in some cases decay by transitions to other neutron-unbound states. Our analysis showed the dependence between the population of these states in Sn131 and the β-decaying In131 state feeding them. Profiting from the isomer selectivity, it was possible to estimate the direct β feeding to the 3/2+ ground and 11/2− isomeric states, disentangling the contributions from the three indium parent states. This made possible to resolve the discrepancies in logft for first-forbidden transitions observed in previous studies, and to determine the β-delayed neutron decay probability (Pn) values of each indium isomers independently. The first measurement of subnanosecond lifetimes in Sn131 was performed in this work. A short T1/2=18(4)−ps value was measured for the 1/2+ neutron single-hole 332-keV state, which indicates an enhanced l-forbidden M1 behavior for the ν3s1/2−1→ν3d3/2−1 transition. The measured half-lives of high-energy states populated in the β decay of the (21/2+) second isomeric state (In131m2) provided valuable information on transition rates, supporting the interpretation of these levels as core-excited states analogous to those observed in the doubly-magic Sn132. Published by the American Physical Society 2024

Preclinical evaluation of MC1R targeting theranostic pair [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH

BackgroundTargeted radionuclide therapy is established as a highly effective strategy for the treatment of metastatic tumors; however, the co-development of suitable imaging companions to therapy remains significant challenge. Theranostic isotopes of terbium (149Tb, 152Tb, 155Tb, 161Tb) have the potential to provide chemically identical radionuclidic pairs, which collectively encompass all modes of nuclear decay relevant to nuclear medicine. Herein, we report the first radiochemistry and preclinical studies involving 155Tb- and 161Tb-labeled crown-αMSH, a small peptide-based bioconjugate suitable for targeting melanoma. Methods155Tb was produced via proton induced spallation of Ta targets using the isotope separation and acceleration facility at TRIUMF with isotope separation on-line (ISAC/ISOL). The radiolabeling characteristics of crown-αMSH with 155Tb and/or 161Tb were evaluated by concentration-dependence radiolabeling studies, and radio-HPLC stability studies. LogD7.4 measurements were obtained for [161Tb]Tb-crown-αMSH. Competitive binding assays were undertaken to determine the inhibition constant for [natTb]Tb-crown-αMSH in B16-F10 cells. Pre-clinical biodistribution and SPECT/CT imaging studies of 155Tb and 161Tb labeled crown-αMSH were undertaken in male C57Bl/6 J mice bearing B16-F10 melanoma tumors to evaluate tumor specific uptake and imaging potential for each radionuclide. ResultsQuantitative radiolabeling of crown-αMSH with [155Tb]Tb3+ and [161Tb]Tb3+ was demonstrated under mild conditions (RT, 10 min) and low chelator concentrations; achieving high molar activities (23–29 MBq/nmol). Radio-HPLC studies showed [161Tb]Tb-crown-αMSH maintains excellent radiochemical purity in human serum, while gradual metabolic degradation is observed in mouse serum. Competitive binding assays showed the high affinity of [natTb]Tb-crown-αMSH toward MC1R. Two different methods for preparation of the [155Tb]Tb-crown-αMSH radiotracer were investigated and the impacts on the biodistribution profile in tumor bearing mice is compared. Preclinical in vivo studies of 155Tb- and 161Tb- labeled crown-αMSH were performed in parallel, in mice bearing B16-F10 tumors; where the biodistribution results showed similar tumor specific uptake (6.06–7.44 %IA/g at 2 h pi) and very low uptake in nontarget organs. These results were further corroborated through a series of single-photon emission computed tomography (SPECT) studies, with [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH showing comparable uptake profiles and excellent image contrast. ConclusionsCollectively, our studies highlight the promising characteristics of [155Tb]Tb-crown-αMSH and [161Tb]Tb-crown-αMSH as theranostic pair for nuclear imaging (155Tb) and radionuclide therapy (161Tb).

First ion source at ISOL@MYRRHA with an improved thermal profile - Theoretical considerations

ISOL@MYRRHA will be a new Radioactive Ion Beam (RIB) facility in Belgium based on the Isotope Separation On-Line (ISOL) technique, and established within the framework of MYRRHA, the world’s first large-scale accelerator driven system project at power levels scalable to industrial systems. The surface ion source, or hot cavity, is chosen as initial source for its reliability and simple design. To account for the higher flux of atoms through this cavity, a theoretical study of the processes within the ion source is discussed here, based on theoretical equations and thermal-electric simulations. In the past, the temperature was clearly identified as a key element to this source, but with the assumption that it remains constant throughout the cavity. Nonetheless, more recent thermal-electric simulations have revealed that the source Ohmic heating leads to temperature gradients along the cavity tube. The temperature profile impact on ionisation in the hot cavity will be reviewed here.

Long-sought isomer turns out to be the ground state of 76Cu

Isomers close to the doubly magic nucleus 78Ni (Z=28, N=50) provide essential information on the shell evolution and shape coexistence far from stability. The existence of a long-lived isomeric state in 76Cu has been debated for a long time. We have performed high-precision mass measurements of 76Cu with the JYFLTRAP double Penning trap mass spectrometer at the Ion Guide Isotope Separator On-Line facility and confirm the existence of such an isomeric state with an excitation energy Ex=64.8(25) keV. Based on the ratio of detected ground- and isomeric-state ions as a function of time, we show that the isomer is the shorter-living state previously considered as the ground state of 76Cu. The result can potentially change the conclusions made in previous works related to the spin-parity and charge radius of the 76Cu ground state. Additionally, the new 76Cu(n,γ) reaction Q-value has an impact on the astrophysical rapid neutron-capture process.

First measurements with a new β-electron detector for spectral shape studies

The shape of the electron spectrum emitted in β decay carries a wealth of information about nuclear structure and fundamental physics. In spite of that, few dedicated measurements have been made of β-spectrum shapes. In this work we present a newly developed detector for β electrons based on a telescope concept. A thick plastic scintillator is employed in coincidence with a thin silicon detector. The first measurements employing this detector have been carried out with mono-energetic electrons from the high-energy resolution electron-beam spectrometer at Bordeaux. Here we report on the good reproduction of the experimental spectra of mono-energetic electrons using Monte Carlo simulations. This is a crucial step for future experiments, where a detailed Monte Carlo characterization of the detector is needed to determine the shape of the β-electron spectra by deconvolution of the measured spectra with the response function of the detector. A chamber to contain two telescope assemblies has been designed for future β-decay experiments at the Ion Guide Isotope Separator On-Line facility in Jyväskylä, aimed at improving our understanding of reactor antineutrino spectra.

The SPES target ion source automated storage system

At the SPES (Selective Production of Exotic Species) facility, intense Radioactive Ion Beams (RIBs) are produced by the interaction of a 40 MeV proton beam with a multi-foil uranium carbide target employing the Isotope Separation On-Line (ISOL) technique. The Target Ion Source (TIS) unit constitutes the core of the isotope production process. TIS units are replaced on a periodic basis during operation to maintain high performance. An automated storage system has been designed to accept highly radioactive TIS units and house them during a cooling period prior to decommissioning. The system is conceived to meet strict functional and safety requirements. Its peculiar design allows for improved reliability and availability during critical operations, as well as minimization of staff exposure to ionizing radiation during maintenance tasks. This contribution describes the design and control architecture of the Temporary Storage System (TSS). The equipment is part of a structured framework of remote manipulation, consisting of various machines interlocked with the Access Control System (ACS) and the Machine Protection System (MPS).

Additively manufactured tantalum cathode for FEBIAD type ion sources: production, geometric measurements, and high temperature test

The Laser Powder Bed Fusion (LPBF) is an Additive Manufacturing (AM) technology suitable to produce almost free-form metallic components. At Legnaro National Laboratories (LNL) of the Italian National Institute for Nuclear Physics (INFN), the LPBF process was recently used to produce parts of the Forced Electron Beam Induced Arc Discharge (FEBIAD) ion source for the SPES Isotope Separation On-Line (ISOL) facility. In this work are presented the feasibility assessment and production steps of tantalum cathodes produced via AM; in addition, the results concerning both the dimensional-geometrical measurements and the preliminary high-temperature test are reported.

Cyclotron-based production of innovative medical radionuclides at the INFN-LNL: state of the art and perspective

The production of medical radionuclides is one of the research activities carried out in the framework of the SPES (Selective Production of Exotic Species) project under the completion stage at the Legnaro National Laboratories of the National Institute for Nuclear Physics (INFN-LNL). The heart of SPES is the 70-MeV proton cyclotron having a dual-beam extraction, installed and commissioned in a new building equipped with ancillary laboratories currently under construction. The SPES main goal is the realization of an advanced ISOL (Isotope Separation On-Line) facility to produce re-accelerated exotic ion beams for fundamental nuclear physics studies. The cyclotron double-beam extraction system allows to simultaneously carry out applied research, such as radionuclides production for medicine (SPES-γ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\gamma$$\\end{document}). This paper summarizes the results obtained with the interdisciplinary projects LARAMED (LAboratory of RAdionuclides for MEDicine) and ISOLPHARM (ISOL technique for radioPHARMaceuticals). The first one, based upon the direct activation method, is focused on the production of the radionuclides under the spotlight of the international community (e.g., 99m\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{99m}$$\\end{document}Tc, 67\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{67}$$\\end{document}Cu, 52/51\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{52/51}$$\\end{document}Mn, 47\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{47}$$\\end{document}Sc and Tb isotopes), from the nuclear cross-section measurements up to the preclinical studies. The other one exploits the ISOL technique for the development and production of radioisotopes with high-specific activity, such as 111\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{111}$$\\end{document}Ag, going beyond the state of the art in the field. The most recent SPES-γ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\gamma$$\\end{document} research activities and future perspective are here described, characterized by a consolidated network of collaborations with national and international institutions.

Measurements of binding energies and electromagnetic moments of silver isotopes – A complementary benchmark of density functional theory

We report on a set of high-precision measurements of nuclear binding and excitation energies, as well as nuclear spins, magnetic dipole and electric quadrupole moments of neutron-rich silver isotopes, 113−123Ag. The measurements were performed using the JYFLTRAP mass spectrometer and the collinear laser spectroscopy beamline at the Ion Guide Isotope Separator On-Line (IGISOL) facility. For the first time, we can firmly establish the ordering of the long-lived Iπ=1/2−,7/2+ states in these isotopes, and pin down the inversion of these two levels at either A=121(N=74) or A=123(N=76). We compare these findings to calculations performed with density functional theory (DFT), from which we establish the crucial role that the spin-orbit strength and time-odd mean fields play in the simultaneous description of electromagnetic moments and nuclear binding.

Precision mass measurement of 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Hf for nuclear structure of 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Lu and the γ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\gamma $$\\end{document} process

We report on the precise mass measurement of the 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Hf isotope performed at the Ion Guide Isotope Separator On-Line facility using the JYFLTRAP double Penning trap mass spectrometer. The new mass-excess value, ME=-55390.8(30)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\ extrm{ME} = -55390.8(30)}$$\\end{document} keV, is in agreement with the literature while being nine times more precise. The newly determined 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Hf electron-capture Q value, QEC=1490.2(34)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$Q_{EC} = 1490.2(34)$$\\end{document} keV, allows us to firmly reject the population of an excited state at 1578 keV in 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Lu and 11 transitions tentatively assigned to the decay of 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Hf. Our refined mass value of 173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{173}$$\\end{document}Hf reduces mass-related uncertainties in the reaction rate of 174\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{174}$$\\end{document}Hf(γ,n)173\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(\\gamma ,n)^{173}$$\\end{document}Hf. Thus, the rate for the main photodisintegration destruction channel of the p nuclide 174\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{174}$$\\end{document}Hf in the relevant temperature region for the γ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\gamma $$\\end{document} process is better constrained.

A multi-reflection time-of-flight mass spectrometer for the offline ion source of the PUMA experiment

The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims at investigating the nucleon composition in the matter density tail of radioactive as well as stable isotopes by use of low-energy antiproton-nucleon annihilation processes. For this purpose, antiprotons provided by the Extra Low ENergy Antiproton (ELENA) facility will be trapped together with the ions of interest. While exotic ions will be obtained by the Isotope mass Separator On-Line DEvice (ISOLDE), stable ions will be delivered from an offline ion source setup designed for this purpose. This allows the proposed technique to be applied to a variety of stable nuclei and for reference measurements. For beam purification, the ion source setup includes a multi-reflection time-of-flight mass spectrometer (MR-ToF MS). Supported by SIMION® simulations, an earlier MR-ToF MS design has been modified to meet the requirements of PUMA. During commissioning of the new MR-ToF device with Ar+ ions, mass resolving powers in excess of 50,000 have been obtained after 150 revolutions, limited by the chopping of the continuous beam from an electron impact ionisation source.

Helium gas cell with RF wire carpets for KEK Isotope Separation System

We have developed radio-frequency (RF) wire carpets and installed them in a cryogenic helium gas cell to increase the extraction yields of target-like fragments (TLFs) produced in multi-nucleon transfer (MNT) reactions at the KEK Isotope Separation System (KISS). KISS is an on-line isotope separator based on a gas cell system, and has been implemented for nuclear spectroscopy of isotopes approaching the N=126 neutron shell closure below lead and neutron-rich actinides. We optimized the design of the RF wire carpet for efficient ion transport of TLFs from the simulations. We then performed experiments both off-line using rubidium ions from an alkali thermal ion-source in the gas cell, and on-line using TLFs produced by a 136Xe beam impinging upon a 198Pt target system, to confirm the performance expected of the design. We confirmed an increase in the extraction yields of more than an order of magnitude when using the cryogenic He gas cell with RF wire carpets as compared to our typical argon gas cell system with laser resonant ionization. The techniques and knowledge acquired in the development of these RF wire carpets will be applied to new RF wire carpets for use in a large-volume helium gas cell which will be installed at an upgraded KISS facility in the near future.

Overview of the Rare isotope Accelerator complex for ON-line experiments (RAON) project

A new rare-isotope beam (RIB) accelerator complex, RAON, is being constructed in the Institute for Basic Science (IBS) in Korea. RAON is equipped with both isotope separation online (ISOL) and in-flight fragmentation (IF) systems and ultimately combines them to provide more neutron-rich (than any single mode operation) ion beams to the users. However, due to the delay in developing high-energy superconducting cavities and cryomodules, it was decided to proceed with the RAON construction project in two phases. In the first phase, the low-energy accelerator system, ISOL, and all experimental setups will be completed by the end of 2022. In the second phase, the high-energy superconducting system will be completed by 2029 or later. In this contribution, the status of the accelerators, RIB production systems, and experimental instruments for RAON is summarized.

Design, Manufacture and Test of the Superconducting Quadrupole Triplet Magnet With Multi-Layered Direct-Wound Hexapole and Octupole Magnets

Currently, the Rare Isotope Science Project of the Institute for Basic Science has been constructing a heavy ion accelerator facility, named RAON. For rare isotope science research in Korea, the RAON includes two different types of facilities; one is the isotope separation on-line, and another is the in-flight system. In the in-flight system, several types of magnets are located: dipole, quadrupole, hexapole, and octupole magnets. Among them, a superconducting quadrupole triplet magnet (SQTM) system has been developed since 2018 and to date, all SQTM systems were manufactured and are being tested. In this paper, the design, manufacture, and commissioning test results of the SQTM systems for the RAON are presented. This magnet consists of five magnets of three different kinds: three quadrupole magnets, a hexapole magnet, and an octupole magnet. All magnets were made by low-temperature superconducting NbTi wires. For manufacturing the hexapole and octupole magnets with a multi-layer structure in a narrow space, the low-temperature superconducting wire was wound by the direct winding method.

Production and mechanical characterization of Titanium Carbide ISOL target disks fabricated by direct ink writing

Titanium carbide boasts a large variety of high-temperature applications from aerospace to electronics and is also employed as Isotope Separation On-Line target for the production of Radioactive Ion Beams, which are employed in numerous research and technological fields, ranging from nuclear physics to medical applications. High working temperature, open and tailored porosity and resistance to thermal stresses are fundamental characteristics for this kind of targets. In this work, an extrusion-based additive manufacturing technique (Direct Ink Writing) was used for the fabrication of complex three-dimensional macro-porous structures in the shape of disks with dimensions compatible for their use as targets. An ink containing a suspension of TiC powders with solid loading of 47.5 vol% was prepared and its rheological properties were investigated. Afterwards, single filaments with an average diameter of 0.36 mm were produced and characterized with four-point bending tests to determine the bulk material tensile strength and Young's modulus. TiC targets were then manufactured and their mechanical properties were characterized with the Ball on Three Balls approach, a biaxial flexural test suitable for disk-shaped samples. For both flexural tests, a Finite Element model was developed representatively reproducing the experimental results. The calculated tensile strength values for both filaments and disks were analyzed with Weibull's statistical approach to provide reference stress limit, corresponding to a survival probability of 99.9%.