On-chip Mach-Zehnder Interferometer Research Articles

On-chip Mach-Zehnder interferometer sensor with a double-slot hybrid plasmonic waveguide for high-sensitivity hydrogen detection.

An on-chip Mach-Zehnder interferometer (MZI) hydrogen sensor, applying a double-slot hybrid plasmonic (DSHP) waveguide composed of a Si waveguide and two Pd disks on both sides as the sensing arm, is designed. The optical confinement factor of the sensing area can be up to 87%. For the MZI hydrogen sensor with a DSHP waveguide of 14 µm, the sensitivity can be as high as 11.935 nm/%, corresponding to a free spectral range (FSR) of 15 nm. Furthermore, the sensor sensitivity is influenced by the MZI structure parameters, which is highly adjustable. The extinction ratio of the interference spectra can reach over 30 dB. A feasible solution is provided in this paper for highly sensitive hydrogen detection.

On-chip multifunctional self-configurable quadrilateral MZI network

Photonic integrated circuits have garnered significant attention in recent years. To enhance the functional versatility of these devices, researchers have introduced the concept of reconfiguration into photonic integrated circuits. Inspired by field programmable gate arrays in the electrical domain, programmable photonic chips employing various topologies have been developed. However, users still encounter challenges when utilizing these devices, as they need to understand the internal structure and principles of the chip and individually adjust the tunable basic units within the topology network. In this paper, we employ the quadrilateral topological network based on the on-chip Mach–Zehnder interferometer as a black box to realize a highly self-reconfigurable optical signal processor. By leveraging this approach, we achieve positive real-valued matrix computation, optical routing, and low-loss optical energy splitting. Our demonstration effectively showcases the immense potential of on-chip programmable photonic waveguide meshes.

Low-voltage MEMS optical phase modulators and switches on a indium phosphide membrane on silicon

In this paper, an optical switch based on a microelectromechanical phase modulator is presented. Phase tuning is achieved by tuning the vertical gap between two vertically coupled waveguides through the application of a reverse bias on a p-i-n junction. An effective refractive index tuning Δneff of 0.03 and a phase shift of more than 3π rad at telecom wavelengths are measured with an on-chip Mach–Zehnder interferometer (MZI), with a phase-tuning length of only 140 μm. With a bias voltage of 5.1 V, a half-wave-voltage-length product (Vπ L) of 5.6 × 10−3 V·cm is achieved. Furthermore, optical crossbar switching in a MZI is demonstrated with a 15 dB extinction ratio using an actuation voltage of only 4.2 V. Our work provides a solution to on-chip, low-voltage phase modulation and optical switching. The switch is fabricated on an indium-phosphide membrane on a silicon substrate, which enables the integration with active components (e.g., amplifiers, lasers, and detectors) on a single chip.

Acousto-optical modulation of thin film lithium niobate waveguide devices

Due to its strong piezoelectric effect and photo-elastic property, lithium niobate is widely used for acousto-optical applications. However, conventional bulk lithium niobate waveguide devices exhibit a large footprint and limited light–sound interaction resulting from the weak guiding of light. Here, we report the first acousto-optical modulators with surface acoustic wave generation, phononic cavity, and low-loss photonic waveguide devices monolithically integrated on a 500 nm thick film of lithium niobate on an insulator. Modulation efficiency was optimized by properly arranging the propagation directions of surface acoustic waves and optical guided modes. The effective photo-elastic coefficient extracted by comparing the first and third harmonic modulation signals from an on-chip Mach–Zehnder interferometer indicates the excellent acousto-optical properties of lithium niobate are preserved in the thin film implementation. Such material property finding is of crucial importance in designing various types of acousto-optical devices. Much stronger amplitude modulation was achieved in a high Q (>300,000) optical resonator due to the higher optical sensitivity. Our results pave the path for developing novel acousto-optical devices using thin film lithium niobate.

On-chip quantum interference with heralded photons from two independent micro-ring resonator sources in silicon photonics.

High visibility on-chip quantum interference among indistinguishable single-photons from multiples sources is a key prerequisite for integrated linear optical quantum computing. Resonant enhancement in micro-ring resonators naturally enables brighter, purer and more indistinguishable single-photon production without any tight spectral filtering. The indistinguisha-bility of heralded single-photons from multiple micro-ring resonators has not been measured in any photonic platform. Here, we report on-chip indistinguishability measurements of heralded single-photons generated from independent micro-ring resonators by using an on-chip Mach-Zehnder interferometer and spectral demultiplexer. We measured the raw heralded two-photon interference fringe visibility as 72 ± 3%. This result agrees with our model, which includes device imperfections, spectral impurity and multi-pair emissions. We identify multi-pair emissions as the main factor limiting the nonclassical interference visibility, and show a route towards achieving near unity visibility in future experiments.

Integrated High-Speed Optical SerDes over 100GBd Based on Optical Time Division Multiplexing

An on-chip optical transceiver for transmission system over 100GBd is proposed based on optical time division multiplexing (OTDM) technology, and the performances, such as the insertion loss, the inter-symbol interference (ISI) crosstalk, and the potential symbol rate, are analyzed in detail. Co-designed with the double rail driver, on-chip Mach-Zehnder interferometer switch repeatedly generates extremely narrow sampling pulses of only 12ps full width at half maximum. Based on such narrow optical sampling pulse train, a four-stage cascaded optical switch divides the 25GHz clock cycle into four recurrent 9.5ps time slots and one blank time slot of 2ps. Thus, a 100GBd optical transmission channel is realized based on 4-bit 25Gbps bit-streams at the electrical interface. The ISI extinction ratio at the worst channel is 1.9dB with 10dB depth modulator, and the insertion loss caused by the OTDM mechanism is about 16dB. Further, taking advantages of dark modulation, an OTDM system with 5-bit 25Gbps bit-streams at the electrical interface is proposed to generate a 125GBd transmission utilizing the same optical sampling pulse. The ISI performance is much better and the extinction ratio at the worst channel is enhanced to 3.99dB.

Quantum Networks with Chiral-Light-Matter Interaction in Waveguides.

We propose a scalable architecture for a quantum network based on a simple on-chip photonic circuit that performs loss-tolerant two-qubit measurements. The circuit consists of two quantum emitters positioned in the arms of an on-chip Mach-Zehnder interferometer composed of waveguides with chiral-light-matter interfaces. The efficient chiral-light-matter interaction allows the emitters to perform high-fidelity intranode two-qubit parity measurements within a single chip and to emit photons to generate internode entanglement, without any need for reconfiguration. We show that, by connecting multiple circuits of this kind into a quantum network, it is possible to perform universal quantum computation with heralded two-qubit gate fidelities F∼0.998 achievable in state-of-the-art quantum dot systems.

Quantum photonics hybrid integration platform

Fundamental to integrated photonic quantum computing is an on-chip method for routing and modulating quantum light emission. We demonstrate a hybrid integration platform consisting of arbitrarily designed waveguide circuits and single-photon sources. InAs quantum dots (QD) embedded in GaAs are bonded to a SiON waveguide chip such that the QD emission is coupled to the waveguide mode. The waveguides are SiON core embedded in a SiO2 cladding. A tuneable Mach Zehnder interferometer (MZI) modulates the emission between two output ports and can act as a path-encoded qubit preparation device. The single-photon nature of the emission was verified using the on-chip MZI as a beamsplitter in a Hanbury Brown and Twiss measurement.

An On-Chip Mach-Zehnder Interferometer in the Microwave Regime

The design, simulation and measurements of an on-chip Mach-Zehnder interferometer operating in the microwave regime are described. Using microwave signals in microfabricated superconducting Al waveguides, the concept of an interferometer is transferred from optics to on-chip. Tuning of the path length of one of the interferometer arms is executed through the tunable inductance of a SQUID. By placing one or more SQUIDs in the waveguide structure and by varying the magnetic flux through the SQUID loop, the total SQUID inductance can be tuned. In this way, a phase difference leading to destructive or constructive interference at the interferometer output can be achieved. Thorough software simulations were performed to determine the different design parameters, assign a desired working frequency and provide a reference for comparison with experimental results. Measurements at 300 mK show an effective working frequency close to the simulations, with a deviation smaller than 0.05 GHz. The behavior of the interferometer is very similar to the simulations as well. The on-off ratio exceeds 40 dB.