Olive Paste Research Articles

Olive Oil (Royal Cultivar) from Mill Obtained by Short Time Malaxation and Early Ripening Stage.

The olive oil from the Royal cultivar has not been studied in depth, especially its relationship between analytical and sensory parameters. Currently, it is a minority cultivar, but due to its excellent organoleptic properties, it is constantly growing. The research objective is to obtain excellent-quality olive oil from the Royal cultivar at an industrial extraction plant and characterize the oil sensory and analytically. For this purpose, three important factors were set: very early olives; very low-time olive paste malaxation; and environmental temperature. The analytical parameters studied were volatile and phenolic compounds, fatty acids, photosynthetic pigments, and other quality parameters. Fourteen phenolic compounds were identified and found in significantly higher concentrations in Royal olive oil, including the oleacein compound. Moreover, volatile compounds from the LOX pathway, such as hexenal, (E)-2-hexenal, and (Z)-3-hexen-1-ol, had significantly higher concentrations, which were related to organoleptic characteristics: very fruity, not very spicy, and very low bitterness. The highest values obtained were 74.98% extraction efficiency at 30 min; 71.31 mg/kg chlorophyll content at 30 min; 156.38 mg/kg phenolic compound at 30 min; 18.98 mg/kg volatile compounds at 15 min; and better organoleptic characteristics at 15 min. The oil extraction efficiency was lower than that of other olive cultivars; nevertheless, the content of volatile compounds is higher.

Evaluation of the Shelf Life of Myristica-fragrans Powder-Flavored Oils Obtained through the Application of Two Processes: Infusion and Co-Pressing Technology.

This work aimed to evaluate the impact of enrichment processing on the quality parameters, bioactivity and sensorial aspects of Myristica fragrans (mace)-flavored olive oil storage for one year. The mace powder was added to extra virgin olive oil through two different processes: immediately after crushing the olives by mixing mace (1% weight/weight (w/w)) with the olive paste (MAVOO-M) and by adding mace to extra virgin olive oil (C) (2% w/w) (MAVOO-I). A multi-analytical approach was applied to measure the main qualitative indexes, such as the free acidity, peroxide value and ultraviolet parameters. The total phenolic and carotenoid contents (TPC and TCC, respectively) and α-tocopherol were also evaluated, as well as the sensory attributes. The radical scavenging potential was estimated by using two different in vitro tests, namely, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH). A significant increase in the free acidity parameter was found in all the flavored oils, and particularly in the MAVOO-M (1.27% oleic acid); at the same time, this oil was the sample with the lowest peroxide value (i.e., 9.68 meqO2/kg) after 360 days of storage. At the end of the storage, an increase in L* values was found in both the MAVOO-M and -I vs. the C (43.88 and 43.02, respectively, vs. 42.62). The TCC was strongly influenced by the addition of mace, especially when the infusion process was used. In fact, after one year of storage, the TCC in the MAVOO-I resulted in ~34.7% more than the MAVOO-M. A promising DPPH radical scavenging activity was observed independently by the applied aromatization process, with IC50 values of 19.77 and 17.80 μg/mL for the MAVOO-M and MAVOO-I, respectively. However, this activity decreased during storage, and a similar trend was observed using the ABTS test. In conclusion the infusion as enrichment methodology led to more promising results in terms of functionality compared with the co-mixing one.

Effect of Vitamin C, D3, Ca Supplements and Olive Paste Enriched with Mountain Tea on Health Biomarkers in Postmenopausal Women with Osteopenia or Osteoporosis: A Prospective Interventional Study

Low dietary intake of calcium, vitamin D, vitamin C and magnesium has been associated with increased risk of osteoporosis. The purpose of the study was to evaluate changes in several bone health indicators and metabolic biomarkers in postmenopausal women with high osteopenia or osteoporosis, followed by a nutritional intervention program. In total, 115 apparently healthy postmenopausal women (52 ± 8 years old) were randomized into four groups: group I (n = 40) received daily 1000 mg vitamin C, 100 mcg vitamin D3, 500 mg calcium(Ca) and 300 mg magnesium (Mg); group II (n = 42) received daily 100 mcg vitamin D3, 500 mg Ca and 300 mg Mg; group III (n = 18) received daily 5 mg bisphosphonates, 100 mcg vitamin D3, 500 mg Ca and 300 mg Mg; and group IV (n = 15) received daily about 364 mg polyphenols via an innovative functional food (50 g olive paste enriched with mountain tea extract) along with 100 mcg vitamin D3, 500 mg Ca and 300 mg Mg. Groups I–III received supplementation for a year whereas group IV received supplementation for 5 months. Changes in bone health indicators and metabolic biomarkers were assessed at the beginning and at the end of the study. Anthropometric indices and whole-body bone mineral density (BMD) were also evaluated at the beginning and at the end of the intervention period. The results revealed improved elevated levels of 25(OH)D3 in groups II, III and IV (+3.71% and +1.45% and +5.62%, respectively). Significant positive changes were recorded for whole-body BMD in all four study groups. Significant beneficial changes for total cholesterol were observed in group IV (−2.07%, p < 0.05) and positive changes in group I for HDL biomarkers (+61.62%, p < 0.05). Additional larger-scale clinical trials and intervention studies are considered essential to fully investigate and elucidate associations between dietary components and biochemical indices of bone health.

Monitoring the Phenolic and Terpenic Profile of Olives, Olive Oils and By-Products throughout the Production Process.

Olive oil is a food of great importance in the Mediterranean diet and culture. However, during its production, the olive oil industry generates a large amount of waste by-products that can be an important source of bioactive compounds, such as phenolic compounds and terpenes, revalorizing them in the context of the circular economy. Therefore, it is of great interest to study the distribution and abundance of these bioactive compounds in the different by-products. This research is a screening focused on phytochemical analysis, with particular emphasis on the identification and quantification of the phenolic and terpenic fractions. Both the main products of the olive industry (olives, olive paste and produced oil) and the by-products generated throughout the oil production process (leaf, "alpeorujo", liquid and solid residues generated during decanting commonly named "borras" and washing water) were analyzed. For this purpose, different optimized extraction procedures were performed for each matrix, followed by high-performance liquid chromatography coupled with electrospray time-of-flight mass spectrometry (HPLC-ESI-TOF/MS) analysis. Although no phenolic alcohols were quantified in the leaf and the presence of secoiridoids was low, this by-product was notable for its flavonoid (720 ± 20 µg/g) and terpene (5000 ± 300 µg/g) contents. "Alpeorujo" presented a complete profile of compounds of interest, being abundant in phenolic alcohols (900 ± 100 µg/g), secoiridoids (4500 ± 500 µg/g) and terpenes (1200 ± 100 µg/g), among others. On the other hand, while the solid residue of the borras was the most abundant in phenolic alcohols (3700 ± 200 µg/g) and secoiridoids (680 ± 20 µg/g), the liquid fraction of this waste was notable for its content of elenolic acid derivatives (1700 ± 100 µg/mL) and phenolic alcohols (3000 ± 300 µg/mL). Furthermore, to our knowledge, this is the first time that the terpene content of this by-product has been monitored, demonstrating that it is an important source of these compounds, especially maslinic acid (120 ± 20 µg/g). Finally, the phytochemical content in wash water was lower than expected, and only elenolic acid derivatives were detected (6 ± 1 µg/mL). The results highlighted the potential of the olive by-products as possible alternative sources of a wide variety of olive bioactive compounds for their revalorization into value-added products.

Towards an index of damage of olive paste during virgin olive oil extraction: The role of β-OH-acteoside diastereomers for risk assessment of the fusty/muddy sediment sensory defect

The aim of this study was to propose an index/marker of thermal/oxidative damage of olive paste during virgin olive oil extraction to assess the risk of sensory defects in the obtained oil. Several olive oil extraction trials were carried out over two production years applying different time, temperature, and oxygen exposure conditions during malaxation. The phenolic composition of the olive pastes was analyzed by High Performance Liquid Chromatography-Diode Array Detector-Mass Spectrometry (HPLC-DAD-MS). The chemical (legal quality indexes, phenolic compounds by HPLC-DAD-MS, volatile compounds by Head Space-Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry (HS-SPME-GC-MS)) and sensory characteristics of the obtained oils were analyzed. The content of the β-OH-acteoside diastereomers in olive paste increased linearly with malaxation time as a function of malaxation temperature and oxidative conditions, following a pseudo-zero order kinetic. At the same time, two volatile compounds linked to sensory defects (2- and 3-methylbutanal) increased in the obtained oils when increasing malaxation time and temperature, and a relationship between them and the fusty/muddy sediment defect in olive oil samples was observed. A further direct relationship between the β-OH-acteoside content in the olive pastes and the 2+3-methylbutanal content in the oils was observed. Therefore, the β-OH-acteoside diastereomers content in olive pastes has been suggested as an index/marker to indicate the risk of sensory defects in virgin olive oil as a function of the thermal and oxidative conditions during malaxation. A threshold value of 100 mg/kg of the content of β-OH-acteoside diastereomers was proposed, above which the fusty/muddy sediment defect is perceptible.

Density-dependent development of the yellow mealworm Tenebrio molitor (Coleoptera: Tenebrionidae)

Abstract The increasing global population has led to high food demand and the interest for alternative resources is highly topical. The interest in utilizing insects as a source of food and feed has been rapidly increasing, as the on-growing population has made the need for protein even more demanding. Insect rearing is economically viable, since they can be fed with organic waste and agricultural by-products. The inclusion of bioactive compounds and active ingredients in insect diets has been identified as a potential key factor for enhancing their growth and performance. The aim of this study was to evaluate the effect of a diet enriched with functional ingredients of medicinal and aromatic plants and agricultural by-products of the Greek flora on the growth, survival and development of larvae of the yellow mealworm, Tenebrio molitor (Coleoptera: Tenebrionidae), in the context of larval density-induced stress. Wheat bran enriched with 5%, 10% or 20% of a prepared mixture containing post-distillation residues of medicinal and aromatic plants of the Greek flora (oregano, thyme, sage and rosemary, linseed oil, rock-samphire, industrial cannabis, and olive paste by-product) was evaluated as insect feeding substrate, whereas wheat bran alone (0% enrichment) served as control. Groups of 25, 50, 75 and 100 first instar larvae were separately collected, weighed, and put in cylindrical plastic cups to test if larval density had any effect on survival and development. According to our results, the final larval weight of T. molitor is significantly affected by the density of larvae but not by the rearing substrate. The highest individual weight among all tested substrates was achieved at the density of 25 larvae. Individual weights were highest when larvae were reared on 5% mixture. The weight of those reared on the control substrate was slightly lower, followed by the 10% and 20% mixtures. Larvae fed with 10% enriched substrate showed the highest survival rate, followed closely by those fed with the control and 5% substrates. Our results clearly demonstrate that larval survival is not density dependent, but density is important in the case of individual larval weight.

Compositional Changes during Storage of Industrially Produced Olive Oils Co-Milled with Olive Leaves.

The possibility of enriching the oil produced from Leccino cultivar olive fruits with phenolic and volatile compounds by adding olive leaves (2.5%) during industrial-scale production were investigated. Furthermore, the influence of the addition of leaves on the oil quality, composition, and oxidative stability during storage for 6 and 12 months was studied. A slight negative impact on the oil quality after processing with leaves was determined. The addition of leaves had no influence on the total saturated, monounsaturated, and polyunsaturated fatty acids in oils, while it influenced increases in total phenolic compounds (+29.55%), total secoiridoids (+29.43%), chlorophylls (+47.59%), and the oil stability index (+18.70%), and their higher values were also determined in the stored oils. The addition of leaves increased C5 volatiles (+10.50%) but decreased C6 volatiles (-10.48%). The intensity of most of the positive sensory characteristics increased in fresh oils obtained with leaves, and the established improvements were also maintained in the stored oils. The extractability of olive paste was positively affected by the addition of olive leaves, which increased the oil yield (+27.17%). The obtained results significantly contribute to the knowledge about the possibilities of enriching olive oils with bioactive compounds.

Acrylamide–Fat Correlation in Californian-Style Black Olives Using Near-Infrared Spectroscopy

Californian-style is one of the most important black table olive elaborations. During its processing, table olives produce acrylamide, a potential carcinogen compound generated during sterilization. In the present study, total fat and acrylamide content in Californian-style table olives were determined and a regression between them was performed (acrylamide concentration range: below limit of detection—2500 ng g−1 and 8–22% for total fat). Nowadays, there are fast and efficient new techniques, such as Near-Infrared Spectroscopy (NIRS) to measure fat content parameters. In that sense, NIRS was used to perform a fat content quantification model in olives in order to indirectly determine acrylamide content. Calibration models for fat quantification were obtained in defatted olive pastes from a unique variety and for olive pastes from different varieties. In the first case, best results were obtained since only one variety was used (R2 = 0.9694; RMSECV = 1.31%; and REP = 8.4%). However, in the second case, results were still acceptable R2 = 0.678, RMSECV = 2.3%, REP = 17.7% and RMSEV = 2.17%. Regression coefficients showed the most influence variables corresponded with fat. The determination coefficient for the fat and acrylamide correlation was high (r = 0.877), being an efficient approach to find out the contribution of fat degradation to acrylamide synthesis in table olives.

Modelling the Rheology of Olive Paste for Oil Extraction Plant Automation: Effects of the Crushing Process on the Rheology of Olive Pastes.

In extra virgin olive oil production, it is essential to obtain a well-prepared olive paste which allows not only the extraction of the oil drops from the olives, but also the achievement of a high-quality oil while maintaining high yields. This work addresses the problem of determining the effect of three crushing machines on the viscosity of the olive paste: a hammer crusher, a disk crusher and a de-stoner were tested. The tests were repeated on both the paste leaving each machine and the paste to which water was added; this was done with the main aim of considering the different dilutions of the paste while entering the decanter. A power law and the Zhang and Evans model were used to analyse the rheological behaviour of the paste. The experimental results allow validation of the two models with a high (more than 0.9) coefficient of determination between experimental and numerical data. The results also show that the pastes obtained with the two classic crushing methods (hammers and disks) are almost identical, with a packing factor of about 17.9% and 18.6%, respectively. Conversely, the paste obtained with the de-stoner entails higher viscosity values and a smaller solid packing factor, of about 2.8%. At 30% dilution with water, the volume of the solid concentration dropped to about 11.6% for the hammer and disc crushers, while for the de-stoner it only reached 1.8%. This behaviour is also reflected in the evaluation of yields, which were 6% lower with the de-stoner. No significant differences regarding the legal parameters of oil quality were found using the three different crushing systems. Finally, this paper establishes some fundamental pillars in the research for an optimal model for identifying the rheological behaviour of the paste as a function of the crusher used. Indeed, since there is an increasing need for automation in the oil extraction process, these models can be of great help in optimizing this process.

Impact of Using Ultrasound on Chemical Properties and Bioactive Compounds of Olive Oil Extracted from Olive Paste

Impact of Using Ultrasound on Chemical Properties and Bioactive Compounds of Olive Oil Extracted from Olive Paste

Effect of enzymatic and talc treatment on olive oil extraction process at the industrial scale

Technological coadjuvants were applied at the beginning of the malaxation phase of the olive oil mechanical extraction process at the industrial scale. An enzymatic formulation consisting of 35% pectinase, 28% pectinmethylesterase and 7% polygalacturonase % (v/v/v) and talc was added during the kneading of olive paste to evaluate its impact on oil extractability and on olive oil quality characteristics. Quantitative and qualitative evaluation of hydrophilic phenols and volatile compounds involved in the main health and sensory properties of high-quality olive oil was carried out. The addition of a combination of enzymatic complex and talc, for the first time at industrial scale, increased the oil extractability by 5.6% (absolute value), improving the degradation of the cell wall structure of olive paste and breaking down the oil-in-water emulsions with a more efficient separation of the oil during the extraction process. The use of the enzymatic complex and talc leads to a percentage increase in the phenolic content in the range of 12%–16% without altering the legal quality parameters and volatile profile of the final product.

A methodological approach to estimate the overall heat transfer coefficient in olive paste malaxers

A methodological approach to estimate the overall heat transfer coefficient in olive paste malaxers

Towards energy efficient scheduling in the olive oil extraction industry: Comparative assessment of energy consumption in two management models

• Energy Use Efficiency and Specific Energy in olive oil mill was evaluated. • Batch and continuous extraction processes were compared. • The Overall Equipment Effectiveness in batch and continuous olive mill was evaluated. • The energy consumed in the batch system is double that of the continuous one. • Batch system performance is nearly half of continuous one. Although olive oil is one of the most important food products throughout the Mediterranean region, the main consideration in configuring and operating extraction plants is still the quantity of crop that will be brought by the individual growers, who are often of small and medium size. On this basis, the common configuration is the batch processing line (Ba-PL) for small and medium capacities, with malaxers arranged in parallel, or in larger-capacity industrial mills, the arrangement of malaxers in series for simulation of continuous processing (Co-PL). A review of literature to date reveals that there have been no assessments of the energy use and scheduling strategies for these two processes, therefore the current study undertakes such assessment and comparison of the Ba-PL and Co-PL configurations, within a single mill facility. The results show that energy output for Ba-PL was 105,570.00 MJ day −1 based on inputs of 3212.76 MJ day −1 , while outputs from Co-PL reached 422,280.00 MJ day −1 from inputs of 6740.38 MJ day −1 . Given that the yield of oil is almost the same in the two processes, the Net Energy (NE) for Ba-Pl then results as 10,2357.24 MJ day −1 versus 41,5539.62 MJ day −1 for the Co-PL configuration, and moreover the later process is seen to achieve almost double the Energy Use Efficiency, at 62.65 versus 32.86 in Ba-PL. Finally, the Overall Equipment Effectiveness (OEE) analysis of performance for the two processes shows values of 93.1 % for the Co-PL configuration but only 51.2 % for Ba-PL, due mainly to dead times in throughput on the Ba-PL machinery, resulting in a 44.7 % decrease in the values for the Performance parameter. The conclusion is that to meet the needs of small producers, there must be new management approaches and improvement in the energy use for batch processing. Some strategies could be: – measure the oil content and moisture in input batches using rapid, non-destructive methods, so that homogeneous batches can be pooled before processing; – reduce dead time by developing automated systems for pumping the olive paste from the malaxers to the separation decanter; – even in the case that they are non-homogenous, consider pooling undersized batches so as to avoid mass flows far below the malaxer capacities. Throughout the Mediterranean, olive oil production using batch processing remains very substantial, therefore further studies are required for the identification and evaluation of solutions for optimising this process.

Sustainability Assessment of Different Extra Virgin Olive Oil Extraction Methods through a Life Cycle Thinking Approach: Challenges and Opportunities in the Elaio-Technical Sector

Owing to its important nutritional features, extra virgin olive oil (EVOO) is one of the world’s highest-value products, mostly manufactured in Mediterranean countries. However, its production exerts several negative environmental effects, mainly related to the agricultural phase (and the use of fertilizers, pesticides, etc.) and waste management. Olive oil can be extracted from the olive paste using different extraction systems, including pressure, centrifugation, and percolation. In particular, EVOO by-product composition strictly depends on the extraction technologies, and two- or three-phase centrifugal extraction methods are usually employed. Therefore, due to olive oil’s economic value, it might be useful to investigate its environmental impacts, to advise sustainable supply chain models. In this context, a valuable tool for assessing the product’s environmental compatibility is the Life Cycle Assessment, which is part of a broader Life Cycle Thinking philosophy. This research focused on evaluating the EVOO environmental impact by comparing two- and three-phases extraction processes. Additionally, two scenarios, (i.e., composting and bio-gasification), were proposed to assess the best valorisation strategy for the produced pomace. The results showed that the two-step extraction process was more sustainable than the three-step one in nine out of nine considered impact categories. By milling 1000 kg of olives, the first technology approximately produces 212 kg CO2 eq, the latter 396 kg CO2 eq. Finally, pomace valorisation by bio-gasification was found as the best recovery process, able to confer greater environmental benefit than composting.

Investigation on the Effects of a Pulsed Electric Field (PEF) Continuous System Implemented in an Industrial Olive Oil Plant.

The aim of this study was to investigate how the treatment of olive paste of the Picholine variety with pulsed electric fields (PEF) under real operating conditions in a large-scale olive oil extraction plant affects the extractability, chemical composition and sensory profile of the oils. The application of pulsed electric fields (PEF) as a non-thermal food processing technology is interesting for many food extraction processes. The results of this study show that pulsed electric fields can be used as a pretreatment before oil separation to increase the extractability of the process and improve the content of functional components. The application of pulsed electric field (PEF) treatment (2.4 kV/cm, 4 kJ/kg, 6 µs pulse width) to olive paste through a continuous system significantly increased the extractability and total concentration of phenols (especially oleuropein derivatives) compared to the control. In addition, the volatile compounds, α-tocopherol, the fatty acid profile and the main legal quality parameters of extra virgin olive oil (EVOO), including free acidity, peroxide values, extinction indices and sensory analysis, were evaluated. The pulsed electric fields (PEF) treatment did not modify these EVOO quality parameters, neither the α-tocopherol content nor the volatile profile. The sensory properties of EVOO were not affected as well as the PEF treatment showed a similar intensity of fruity and pungent attributes without any off-flavor according to the European Union legal standards. An increase in the bitter taste attribute was observed in the PEF oils. Consequently, this study demonstrates that pulsed electric fields (PEF) processing could be implemented in olive oil processing as pretreatment for improving the efficiency of the process.

Postprandial Responses of Serum Cholesterol, Glucose and Plasma Antioxidant Activity, after Intake of an Innovative High Fat Mayonnaise-Based Appetizer, Enhanced with Olive Paste, in Healthy Volunteers.

Several Mediterranean functional foods and their process by-products may exert a beneficial role on hyperlipidemia, hyperglycemia, and oxidative stress modulation, providing bioactive compounds with functional properties, contributing to possible chronic disease prevention (cardiovascular disease, metabolic syndrome, obesity, diabetes mellitus, etc.). The purpose of the present interventional study was to investigate the postprandial responses of metabolic biomarkers, after the intake of an innovative mayonnaise-based appetizer, enhanced with olive paste, in healthy volunteers. In this cross-over design, randomized and single-blind, interventional–clinical trial, 10 healthy volunteers, aged 20–30 years old, after splitting into the control group and the Mediterranean group, consumed a pasta meal rich in fat and carbohydrates (150 g), containing a mayonnaise-based appetizer or the same appetizer, enhanced with 9% olive paste. After a 1-week washout period, the subjects consumed the meals in reverse. Differences between groups on postprandial responses of total plasma antioxidant capacity according to the FRAP method, serum total cholesterol, glucose, and uric acid levels, were determined before, 30 min, 1.5 h, and 3 h after consumption. The results showed that, in comparison to the control group, consumption of the enhanced appetizer resulted in a significantly decreased total serum cholesterol and glucose levels, and also led to a significant increase in plasma total antioxidant activity, 3 h after consumption (p < 0.05). Further investigation with large prospective studies is needed to validate the current results.

The Use of a Cooling Crusher to Reduce the Temperature of Olive Paste and Improve EVOO Quality of Coratina, Peranzana, and Moresca Cultivars: Impact on Phenolic and Volatile Compounds

A new technology used to reduce the temperature of olive paste was applied to the extra virgin olive oil (EVOO) mechanical extraction process. The performance of a cooling crusher that was able to counteract the thermal increase that occurs during olive fruit grinding was analyzed to evaluate the effects on the development of volatile compounds and the concentration of hydrophilic phenols in the final product. The volatile profiles and phenolic fraction of EVOOs extracted from three different cultivars (Coratina, Peranzana, and Moresca) were positively affected by the use of lower temperatures during the crushing phase. The volatile fractions showed increases in the total aldehydes, mainly related to the concentrations of (E)-2-hexenal, and reductions in the total alcohols, mainly due to 1-penten-3-ol, 1-hexanol and (Z)-3-hexen-1-ol contents. The use of a lower temperature reduced the level of oxidative processes, protecting the phenolic compounds in the Moresca and Peranzana EVOOs by 17.8 and 12.1%, respectively.

Oil Bodies Cream from Olive Paste: Extraction of a Functional Ingredient for Developing a Stable Food Emulsion

Oil bodies (OBs) dispersed in an aqueous medium form a natural emulsion with high physical and microbiological stability. This work was focused on the development of a new protocol for extracting OBs from olive paste, through the extraction of an olive oil body cream (OOBC) with a yield of about 43% (wt/wt) in approximately 2 h. The proximate analysis revealed the presence of moisture, lipids and proteins as well as the contents of polyphenols and flavonoids, and the antioxidant powers were determined. The rheological and tribological performances of the OOBC were evaluated. Moreover, we measured a size distribution in the range of 0.7–1.7 m, by using a standard optical microscope. The results have demonstrated clearly that the OOBC extracted from the olive paste can be used as a functional and vegan ingredient in food emulsions.

TR 22 Bölgesi’nde Zeytin ve Zeytinyağı Pazarlama Organizasyonu ve Pazarlama Etkinliklerinin Değerlendirilmesi

In this study, olive oil producing, processing and intermediary enterprises in the TR22 Region in the 2017-18 production year were examined. As a result of the study, it was found that oil mills, olive oil factories, traders, retailers, TARİŞ and final consumers form the marketing channels in olive oil and olive oil in the research region. It was found that the waiting of oil grain olives as a result of agglomeration in post-harvest processing centers, the use of sacks in the transportation of oil grain olives, the mixing of bottom olives with the ones plucked from the branch and the use of poles in harvesting were found to reduce the efficiency. It has been found that increasing the olive paste temperature above the optimum level, opening the lid of the malaxer machine during kneading, and the emergence of the black water problem as a result of the use of three-phase and classical systems are the factors that reduce the marketing efficiency in the processing service. It was found that the marketing margin of the intermediaries was 1.64% in olive oil, 20.00% of traders in olive oil, 14.06% of factories and 22.58% of retailers. The difference between producer prices and retail prices was 51.16% for olive oil.

High vacuum applied during malaxation in oil industrial plant: Influence on virgin olive oil extractability and quality

Vacuum technology was applied for the first time at industrial scale to the mechanical extraction processes of virgin olive oil (VOO). The study was carried out using an industrial plant with a working capacity of 4 tons of olives. The use of high vacuum conditions during the malaxation process induced an intense mass transfer into the olive paste that improved the coalescence phenomena of oil droplets with a significant increase in oil extractability for four different cultivars (Arbequina, Arbosana, Koroneiki and Picual). The evaluation of the quality characteristics of the Picual VOO showed an enhancement in the hydrophilic phenol fraction mainly related to the oleacein content. The low temperature set during the vacuum treatment (16 ± 1 °C for 30 min of malaxation) limited the stripping process of the main aldehydes, alcohols and esters. In contrast, other negative volatile compounds related to off-flavoured VOO (ethanol, 3-methyl-1-butanol, ethyl acetate and acetic acid) were significantly reduced.