Oligo Ethylene Glycol Side Chains Research Articles

Facile Synthesis of Organic–Inorganic Hybrid Heterojunctions of Glycolated Conjugated Polymer‐TiO2−X for Efficient Photocatalytic Hydrogen Evolution

AbstractThe utilization of the organic–inorganic hybrid photocatalysts for water splitting has gained significant attention due to their ability to combine the advantages of both materials and generate synergistic effects. However, they are still far from practical application due to the limited understanding of the interactions between these two components and the complexity of their preparation process. Herein, a facial approach by combining a glycolated conjugated polymer with a TiO2−X mesoporous sphere to prepare high‐efficiency hybrid photocatalysts is presented. The functionalization of conjugated polymers with hydrophilic oligo (ethylene glycol) side chains can not only facilitate the dispersion of conjugated polymers in water but also promote the interaction with TiO2−X forming stable heterojunction nanoparticles. An apparent quantum yield of 53.3% at 365 nm and a hydrogen evolution rate of 35.7 mmol h−1 g−1 is achieved by the photocatalyst in the presence of Pt co‐catalyst. Advanced photophysical studies based on femtosecond transient absorption spectroscopy and in situ, XPS analyses reveal the charge transfer mechanism at type II heterojunction interfaces. This work shows the promising prospect of glycolated polymers in the construction of hybrid heterojunctions for photocatalytic hydrogen production and offers a deep understanding of high photocatalytic performance by such heterojunction photocatalysts.

Alcohol-Processable All-Polymer n-Type Thermoelectrics.

The general strategy for n-type organic thermoelectric is to blend n-type conjugated polymer hosts with small molecule dopants. In this work, all-polymer n-type thermoelectric is reported by dissolving a novel n-type conjugated polymer and a polymer dopant, poly(ethyleneimine) (PEI), in alcohol solution, followed by spin-coating to give polymer host/polymer dopant blend film. To this end, an alcohol-soluble n-type conjugated polymer is developed by attaching polar and branched oligo (ethylene glycol) (OEG) side chains to a cyano-substituted poly(thiophene-alt-co-thiazole) main chain. The main chain results in the n-type property and the OEG side chain leads to the solubility in hexafluorineisopropanol (HFIP). In the polymer host/polymer dopant blend film, the Coulombic interaction between the dopant counterions and the negatively charged polymer chains is reduced and the ordered stacking of the polymer host is preserved. As a result, the polymer host/polymer dopant blend exhibits the power factor of 36.9µWm-1K-1, which is one time higher than that of the control polymer host/small molecule dopant blend. Moreover, the polymer host/polymer dopant blend shows much better thermal stability than the control polymer host/small molecule dopant blend. This research demonstrates the high performance and excellent stability of all-polymer n-type thermoelectric.

Enhancing Electrical Conductivity and Power Factor in Poly‐Glycol‐Bithienylthienothiophene with Oligoethylene Glycol Side Chains Through Tris (pentafluorophenyl) Borane Doping

AbstractDoping of organic semiconductors has served as an effective method to achieve high electrical conductivity and large thermoelectric power factor. This is of importance to the development of flexible/wearable electronics and green energy‐harvesting technologies. The doping impact of the Lewis acid tris (pentafluorophenyl) borane (BCF) on the thermoelectric performance of poly(2‐(4,4′‐bis(2‐methoxyethoxy)‐5′‐methyl‐[2,2′‐bithiophen]‐5‐yl)‐5‐methylthieno[3,2‐b]thiophene (pgBTTT), a thiophene‐based polymer featuring oligoethylene glycol side chains is investigated. Tetrafluorotetracyanoquinodimethane (F4TCNQ), a well‐established dopant, is utilized as a comparison; however, its inability to co‐dissolve with pgBTTT in less polar solvents hinders the attainment of higher doping levels. Consequently, a comparative study is performed on the thermoelectric behavior of pgBTTT doped with BCF and F4TCNQ at a very low doping level. Subsequent investigation is carried out with BCF at higher doping levels. Remarkably, at 50 wt% BCF doping level, the highest power factor of 223 ± 4 µW m−1 K2 is achieved with an electrical conductivity of 2180 ± 360 S cm−1 and a Seebeck coefficient of 32 ± 1.3 µV K−1. This findings not only contribute valuable insights to the dopant interactions with oxygenated side chain polymers but also open up new avenues for high conductivity thermoelectric polymers in flexible electronic applications.

Abstract 481: Proteomimetic polymers limit tumor growth in multiple models via potent antigen-specific T cell activation

Abstract Background: Patient-specific cancer vaccines derived from tumor antigen have been explored as a promising therapeutic strategy, however, challenges delivering vaccine components in a coordinated fashion to elicit antitumor responses remain. To overcome these, we utilize a novel nanoplatform called the Protein-Like Polymer (PLP), which allows for sustained and targeted delivery of tumor antigens in conjunction with adjuvants. Methods: PLPs containing peptide antigens were synthesized via ring-opening metathesis polymerization (ROMP) and characterized. A library of compounds with different sidechain linkage chemistries, degrees of polymerization (DP), and inclusion/exclusion of Oligo-ethylene glycol (OEG) were made to determine design rules for immune activation. Cell uptake and functional assays using payload-specific T Cells were conducted. Immunization in three independent tumor models was done to show generalizability. Ability of PLPs to co-deliver adjuvants was tested by electrostatically coupling small molecule STING agonist, 2’3’ cGAMP. Results: Conjugating peptide antigens to the polymer via a cleavable disulfide linkage, which reduces intracellularly in APCs, resulted in increased endosomal localization, higher levels of induced T cell proliferation, cytokine production, and expression of activation markers in CTLs and APCs. Incorporating a diluent amount of OEG side chains reduced enzymatic degradation while increasing immunogenicity and uptake. Additionally, increasing the DP, and therefore the density of antigen side chains, further improved vaccine efficacy and resistance to proteolysis. Antigen-PLP conjugates enhanced dendritic cell activation and T-cell response only when paired with cells from their cognate system, with no activity in immune cells not expressing receptors for the payload demonstrating antigen-specificity. Mice bearing established B16F10, MC38, or TC-1 tumors treated with PLPs containing gp100, adpgk, or E7 respectively all showed increased survival times, reduced tumor burden with corresponding changes in immune cell profiles, and immunological memory upon rechallenge. Impressively, mice treated with STING-PLP complexes had significantly smaller tumors vs control at day 14 (0.038g vs 0.76g; p <0.0001) and allowed for subcutaneous administration of 2’3’ cGAMP, which traditionally requires intratumoral injection. Studies on the effects of vaccinating with pools of neoantigens multiplexed onto one PLP are ongoing. Conclusion: This work validates the ability of PLPs to overcome major limitations in cancer vaccine development. The modularity of the platform allows for complex nano-architectures including systems capable of delivering challenging compounds, ie small molecule STING agonists, subcutaneously through electrostatic coupling, highlighting its potential to revolutionize cancer vaccinology. Citation Format: Max Wang, Miran Choi, Bin Zhang, Nathan Gianneschi. Proteomimetic polymers limit tumor growth in multiple models via potent antigen-specific T cell activation [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 481.

Self-Assembly of Amphiphilic PDI and NDI Derivatives with Opposite Thermoresponsive Fluorescent Behaviors in Aqueous Solution.

This work presents a study of the thermally induced aggregation of perylene diimide (PDI) and naphthalene diimide (NDI) derivatives modified with oligo ethylene glycol (OEG) chains in aqueous solution. Water-soluble and flexible OEG side chains were introduced into the π-core of glutamate-modified NDI and PDI structures, and the aggregation process was modulated by heating or cooling in water. Interestingly, a rare opposite temperature response of fluorescent behavior from the two amphiphilic chromophores was revealed, in which the PDI exhibited fluorescent enhancement, while fluorescent quenching upon temperature increase was observed from the NDI assembly. The mechanism of thermally induced aggregation is clearly explained by studies with various spectroscopic techniques including UV-visible, fluorescence, 1H NMR, 2D NMR spectroscopy, and SEM observation as well as control experiments operated in DMSO solution. It is found that although similar J-aggregates were formed by both amphiphilic chromophores in aqueous solution, the temperature response of the aggregates to temperature was opposite. The degree of PDI aggregation decreased, while that of NDI increased upon temperature rising. This research paves a valuable way for understanding the complicated supramolecular behaviors of amphiphilic chromophores.

Location of a Hydrophobic Load in Poly(oligo(ethylene glycol) methyl ether methacrylate)s (PEGMAs) Dissolved in Water and Probed by Fluorescence.

Two series of pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s referred to as PyEG5-PEGnMA and PyC4-PEGnMA were prepared to probe the region surrounding the polymethacrylate backbone by using the fluorescence of the dye pyrene. PyEG5-PEGnMA and PyC4-PEGnMA were prepared by copolymerizing the EGnMA methacrylate monomers with penta(ethylene glycol) 1-pyrenemethyl ether methacrylate or 1-pyrenebutyl methacrylate, respectively. In organic solvents, the much longer 18 non-hydrogen atom linker connecting the pyrene moieties to the polymethacrylate backbone in the PyEG5-PEGnMA samples enabled the deployment of the pyrenyl labels into the solution. In water, however, an excited pyrene for PyEG5-PEGnMA was found to probe a same volume as for the PyC4-PEGnMA samples where a much shorter 6 non-hydrogen atom spacer connected pyrene to the backbone. Another surprising observation, considering that the hydrophobicity of pyrene induces strong pyrene aggregation for many pyrene-labeled water-soluble polymers (Py-WSPs) in water, was the little pyrene aggregation found for the PyEG5-PEGnMA and PyC4-PEGnMA samples in water. These effects could be related to the organic-like domain (OLD) generated by the oligo(ethylene glycol) side chains densely arranged around the polymethacrylate backbone of the polymeric bottlebrush (PBB). Additional fluorescence experiments conducted with the penta(ethylene glycol) 1-pyrenemethyl ether derivative indicated that the cylindrical OLD surrounding the polymethacrylate backbone had a chemical composition similar to that of ethylene glycol. Binding of hydrophobic pyrene molecules to unlabeled PEGnMA bottlebrushes in water further supported the existence of the OLD. The demonstration, that PEGnMA samples form an OLD in water, which can host and protect hydrophobic cargoes like pyrene, should lead to the development of improved PEGnMA-based drug delivery systems.

Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene-Quinoxaline Polymers.

Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼-5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N'-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC.

Alcohol‐Soluble n‐Type Polythiophenes as Cathode Interlayer in Organic Photodetectors for Hole Blocking

AbstractFor organic photodetectors (OPDs), cathode interlayer (CIL) with low‐lying highest occupied molecular orbital (EHOMO) energy level is required to reduce dark current density (Jd). In this study, toward application as CIL in OPDs, an alcohol‐processable n‐type conjugated polymer (n‐PT8) based on imide/cyano‐substituted polythiophene backbone and branched oligo(ethylene glycol) side chain is developed. Owing to the electron‐accepting imide/cyano groups on the backbone, n‐PT8 exhibits deep‐lying EHOMO of −5.80 eV and a high conductivity of 5.12 × 10−6 S cm−1. OPD with n‐PT8 as CIL exhibits dark current density one order of magnitude lower than that with the state‐of‐the‐art CIL material because of the large energy barrier for reverse hole injection. Moreover, the device performance is insensitive to the n‐PT8 layer thickness, which is very desirable for the mass production of OPDs. The near‐infrared (NIR) OPDs based on n‐PT8 exhibit an ultra‐low dark current density of 1.76 × 10−9 A cm−2 and a specific detectivity of 2.88 × 1012 cm Hz1/2 W−1 at −1 V. To the best knowledge, this is the first report on n‐type polythiophene derivatives as CIL in organic opto‐electronic devices.

Exploring Functional Polymers in the Synthesis of Luminescent ZnO Quantum Dots for the Detection of Cr6+, Fe2+, and Cu2.

The main aim of this work is to demonstrate that well-defined methacrylate-based copolymers with oligoethylene glycol side chains and functional groups such as thiol and glycidyl, obtained by photo-initiated reversible addition-fragmentation chain transfer (RAFT) in ethanol, are highly suitable as templates in the synthesis and protection of ZnO quantum dots (ZnO QDs) with remarkable photoluminescent properties. While the affinity of thiol groups to metallic surfaces is well established, their interaction with metal oxides has received less scrutiny. Furthermore, under basic conditions, glycidyl groups could react with hydroxyl groups on the surface of ZnO, representing another strategy for hybrid synthesis. The size and crystalline morphology of the resulting hybrids were assessed using DLS, TEM, and XRD, indicating that both polymers, even with a low proportion of functional groups (5% mol) are appropriate as templates and ligands for ZnO QDs synthesis. Notably, thiol-containing polymers yield hybrids with ZnO featuring excellent quantum yield (up to 52%), while polymers with glycidyl groups require combination with the organosilane aminopropyl triethoxysilane (APTES) to achieve optimal results. In both cases, these hybrids exhibited robust stability in both ethanol and aqueous environments. Beyond fundamental research, due to the remarkable photoluminescent properties and affordability, these hybrid ZnO QDs are expected to have potential applications in biotechnology and green science; in particular, in this study, we examined their use in the detection of environmental contaminants like Fe2+, Cr6+, and Cu2+. Specifically, the limit of detection achieved at 1.13 µM for the highly toxic Cr6+ underscores the significant sensing capabilities of the hybrids.

Cross-Linked Hyaluronan Derivatives in the Delivery of Phycocyanin.

An easy and viable crosslinking technology, based on the "click-chemistry" reaction copper(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (click-crosslinking), was applied to graft copolymers of medium molecular weight (i.e., 270 kDa) hyaluronic acid (HA) grafted with ferulic acid (FA) residues bearing clickable propargyl groups, as well as caffeic acid derivatives bearing azido-terminated oligo(ethylene glycol) side chains. The obtained crosslinked materials were characterized from the point of view of their structure and aggregation liability to form hydrogels in a water environment. The most promising materials showed interesting loading capability regarding the antioxidant agent phycocyanin (PC). Two novel materials complexes (namely HA(270)-FA-TEGEC-CL-20/PC and HA(270)-FA-HEGEC-CL-20/PC) were obtained with a drug-to-material ratio of 1:2 (w/w). Zeta potential measurements of the new complexes (-1.23 mV for HA(270)-FA-TEGEC-CL-20/PC and -1.73 mV for HA(270)-FA-HEGEC-CL-20/PC) showed alterations compared to the zeta potential values of the materials on their own, suggesting the achievement of drug-material interactions. According to the in vitro dissolution studies carried out in different conditions, novel drug delivery systems (DDSs) were obtained with a variety of characteristics depending on the desired route of administration and, consequently, on the pH of the surrounding environment, thanks to the complexation of phycocyanin with these two new crosslinked materials. Both complexes showed excellent potential for providing a controlled/prolonged release of the active pharmaceutical ingredient (API). They also increased the amount of drug that reach the target location, enabling pH-dependent release. Importantly, as demonstrated by the DPPH free radical scavenging assay, the complexation process, involving freezing and freeze-drying, showed no adverse effects on the antioxidant activity of phycocyanin. This activity was preserved in the two novel materials and followed a concentration-dependent pattern similar to pure PC.

Solid-state 13C-NMR spectroscopic determination of side-chain mobilities in zirconium-based metal–organic frameworks

Abstract. Porous interpenetrated zirconium–organic frameworks (PIZOFs) are a class of Zr-based metal–organic frameworks (MOFs) which are composed of long, rod-like dicarboxylate linkers and Zr6O4(OH)4(O2C)12 nodes. Long oligoethylene glycol or aliphatic side chains are covalently attached to the linker molecules in the cases of PIZOF-10 and PIZOF-11, respectively. These side chains are supposedly highly mobile, thus mimicking a solvent environment. It is anticipated that such MOFs could be used as a solid catalyst – the MOF – with pore systems showing properties similar to a liquid reaction medium. To quantify the side-chain mobility, here we have applied different 1D and 2D NMR solid-state spectroscopic techniques like cross-polarization (CP) and dipolar-coupling chemical-shift correlation (DIPSHIFT) studies. The rather high 1H-13C CP efficiency observed for the CH2 groups of the side chains indicates that the long side chains are unexpectedly immobile or at least that their motions are strongly anisotropic. More detailed information about the mobility of the side chains was then obtained from DIPSHIFT experiments. Analytical expressions for elaborate data analysis are derived. These expressions are used to correlate order parameters and to slow motional rates with signals in indirect spectral dimensions, thus enabling the quantification of order parameters for the CH2 groups. The ends of the chains are rather mobile, whereas the carbon atoms close to the linker are more spatially restricted in mobility.

Thin film crystallization of oligoethylene glycol-benzothieno benzothiophene: Physical vapor deposition versus spin coating

The benzothieno-benzothiophene derivatives are among the best-performing organic semiconductor materials. Their triumphant application in electronic devices is correlated to their capability to form well-defined thin film structures featuring crystalline order at the substrate–organic interface. Thin films of the molecule 2,7-bis(2-(2-methoxy ethoxy)ethoxy) benzo[b]-benzo[4,5]thieno[2,3-d]thiophene (OEG-BTBT) are prepared by spin coating and physical vapor deposition using different experimental conditions. Atomically flat silicon oxide surfaces with defined surface energies are used as substrates. The crystalline morphology is studied for the monolayer regime up to thick films by X-ray reflectivity, grazing incidence X-ray diffraction and atomic force microscopy. Depending on the preparation process, substantial variations are found in the structure of the first monolayers. The highly flexible oligoethylene glycol side chains allow different monolayer formation processes. Also, the subsequent crystal growth strongly depends on the nucleation in the monolayer regime. Here, we observe two distinct nucleation scenarios, one directly at the substrate surface and one at the edges of sub-monolayer terraces. As a consequence, the mosaicity of the crystallites in thick films is strongly affected by the growth type. This work illustrates that different thin film preparation processes can result in different nucleation mechanisms for subsequent crystallization. Consequently, variations in the crystallographic order in device relevant films are observed.

High-Performance n-Type Polymeric Mixed Ionic-Electronic Conductors: The Impacts of Halogen Functionalization.

Developing high-performance n-type polymer mixed ionic-electronic conductors (PMIECs) is a grand challenge, which largely determines their applications in vaious organic electronic devices, such as organic electrochemical transistors (OECTs) and organic thermoelectrics (OTEs). Herein, two halogen-functionalized PMIECs f-BTI2g-TVTF and f-BTI2g-TVTCl built from fused bithiophene imide dimer (f-BTI2) as the acceptor unit and halogenated thienylene-vinylene-thienylene (TVT) as the donor co-unit are reported. Compared to the control polymer f-BTI2g-TVT, the fluorinated f-BTI2g-TVTF shows lower-positioned lowest unoccupied molecular orbital (LUMO), improved charge transport property, and greater ion uptake capacity. Consequently, f-BTI2g-TVTF delivers a state-of-the-artµC* of 90.2 F cm-1 V-1 s-1 with a remarkable electron mobility of 0.41 cm2 V-1 s-1 in OECTs and an excellent power factor of 64.2 µW m-1 K-2 in OTEs. An OECT-based inverter amplifier is further demonstrated with voltage gain up to 148V V-1 , which is among the highest values for OECT inverters. Such results shed light on the impacts of halogen atoms on developing high-performing n-type PMIECs.

Growth of Merocyanine Dye J-Aggregate Nanosheets by Living Supramolecular Polymerization.

J-aggregates are highly desired dye aggregates but so far there has been no general concept how to accomplish the required slip-stacked packing arrangement for dipolar merocyanine (MC) dyes whose aggregation commonly affords one-dimensional aggregates composed of antiparallel, co-facially stacked MCs with H-type coupling. Herein we describe a strategy for MC J-aggregates based on our results for an amphiphilic MC dye bearing alkyl and oligo(ethylene glycol) side chains. In an aqueous solvent mixture, we observe the formation of two supramolecular polymorphs for this MC dye, a metastable off-pathway nanoparticle showing H-type coupling and a thermodynamically favored nanosheet showing J-type coupling. Detailed studies concerning the self-assembly mechanism by UV-Vis spectroscopy and the packing structure by atomic force microscopy and wide-angle X-ray scattering show how the packing arrangement of such amphiphilic MC dyes can afford slip-stacked two-dimensional nanosheets whose macrodipole is compensated by the formation of a bilayer structure. As an additional feature we demonstrate how the size of the nanosheets can be controlled by seeded living supramolecular polymerization.

Growth of Merocyanine Dye J‐Aggregate Nanosheets by Living Supramolecular Polymerization

AbstractJ‐aggregates are highly desired dye aggregates but so far there has been no general concept how to accomplish the required slip‐stacked packing arrangement for dipolar merocyanine (MC) dyes whose aggregation commonly affords one‐dimensional aggregates composed of antiparallel, co‐facially stacked MCs with H‐type coupling. Herein we describe a strategy for MC J‐aggregates based on our results for an amphiphilic MC dye bearing alkyl and oligo(ethylene glycol) side chains. In an aqueous solvent mixture, we observe the formation of two supramolecular polymorphs for this MC dye, a metastable off‐pathway nanoparticle showing H‐type coupling and a thermodynamically favored nanosheet showing J‐type coupling. Detailed studies concerning the self‐assembly mechanism by UV‐Vis spectroscopy and the packing structure by atomic force microscopy and wide‐angle X‐ray scattering show how the packing arrangement of such amphiphilic MC dyes can afford slip‐stacked two‐dimensional nanosheets whose macrodipole is compensated by the formation of a bilayer structure. As an additional feature we demonstrate how the size of the nanosheets can be controlled by seeded living supramolecular polymerization.

Oligo (ethylene glycol) side chain engineering: An efficient way for boosting the development of green-solvent processable electrochromic devices

As an effective strategy for improving the performance of optoelectronic polymers, oligo (ethylene glycol) (OEG) side chain engineering has been widely used in optoelectronic materials field. However, the research of its impact on electrochromic (EC) polymers started to be explored in recent years. In this work, the excellent EC properties of the star polymer PTQ-10 (poly[(thiophene)-alt-(6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline)]) were first investigated and proved. Subsequently, a series of novel PTQ-type polymers with OEG side chains (PTQ-OEGs) were successfully synthesized and studied. Compared with PTQ-10, the introduction of OEG side chains can significantly shorten the coloring time (∼82.2 %) and improve the coloration efficiency (∼37.3 %). Notably, the solubility of PTQ-OEGs is greatly enhanced in ideal green solvents (ethanol) via introducing the OEG side chains. Therefore, the EC active layers of PTQ-BTEG can be simply fabricated by its ethanol solution. Based on this feature, an all-green EC device PTQ-BTEG@ECD-3 (from material processing to device preparation) was prepared successfully, which exhibited fast coloring (6.25 s) and bleaching (0.85 s) as well as high coloration efficiency (622.57 cm2 C−1). Hence, we not only reported the relationship between OEGs and EC polymers thoroughly, but also proved the OEG engineering is a practical approach to promote the development of all-green EC devices in the near future.

Memory Effect by Melt Crystallization Observed in Polymorphs of a Benzothieno-Benzothiophene Derivative.

This work provides a comprehensive illustration of a crystalline melt memory effect recorded for three solvates of the 2,7-bis(2-(2-methoxyethoxy)ethoxy)benzo[b]benzo[4,5] thieno[2,3-d]thiophene (OEG-BTBT) molecule with dichloromethane (DCM) molecules. Combined optical microscopy and X-ray diffraction measurements at different temperatures are used to get an overview of the structural and morphological properties like melting points, isotropic transition temperatures, induction times, and crystallization kinetics of the three forms. An outstanding observation is made upon annealing the three polymorphs at temperatures well above their respective melting points as well as above the optical clearance temperature. After cooling back to room temperature, recrystallization results in the formation of the initial phase present before the annealing process. This melt memory effect is observed for all three solvates. These observations can be correlated to the strong interaction between the DCM molecules and the oligoethylene glycol side chains, even in the molten state. This conclusion rationalizes the experimental observation made upon solvent vapor annealing of the crystalline sample with DCM, which unambiguously transformed the system into a disordered state.

Green Solvent Processable, Asymmetric Dopant‐Free Hole Transport Layer Material for Efficient and Stable n‐i‐p Perovskite Solar Cells and Modules

AbstractThe use of dopant‐free hole transport layers (HTLs) is critical in stabilizing n‐i‐p perovskite solar cells (pero‐SCs). However, these HTL materials are often processed with toxic solvents, which is not ideal for industrial production. Upon substituting them with green solvents, a trade‐off emerges between maintaining the high crystallinity of the HTL materials and ensuring high solubility in the new solvents. In this paper, we designed a novel, linear, organic small molecule, BDT‐C8‐3O, by introducing an asymmetric polar oligo(ethylene glycol) side chain. This method not only overcomes the solubility limitations in green solvents but also enables stacking the conjugated main chains in two patterns, which further enhances crystallinity and hole mobility. As a result, the n‐i‐p pero‐SCs based on chlorobenzene‐ or green (natural compound) solvent 3‐methylcyclohexanone‐processed BDT‐C8‐3O HTL that without any dopant delivered world‐recorded power conversion efficiencies of 24.11 % (certified of 23.82 %) and 23.53 %, respectively. The devices also demonstrated remarkable operational and high‐temperature stabilities, maintaining over 84 % and 79.5 % of their initial efficiency for 2000 h, respectively. Encouragingly, dopant‐free BDT‐C8‐3O HTL exhibits significant advantages in large‐area fabrication, achieving state‐of‐the‐art PCEs exceeding 20 % for 5×5 cm2 modules (active area: 15.64 cm2), even when processed using green solvents.

Green Solvent Processable, Asymmetric Dopant-Free Hole TransportLayer Materialfor Efficient and Stable n-i-p Perovskite Solar Cells and Modules.

The use of dopant-free hole transport layers (HTLs) is critical in stabilizing n-i-p perovskite solar cells (pero-SCs). However, these HTL materials are often processed with toxic solvents, which is not ideal for industrial production. Upon substituting them with green solvents, a trade-off emerges between maintaining the high crystallinity of the HTL materials and ensuring high solubility in the new solvents. In this paper, we designed a novel, linear, organic small molecule, BDT-C8-3O, by introducing an asymmetric polar oligo(ethylene glycol) side chain. This method not only overcomes the solubility limitations in green solvents but also enables stacking the conjugated main chains in two patterns, which further enhances crystallinity and hole mobility. As a result, the n-i-p pero-SCs based on chlorobenzene- or green (natural compound) solvent 3-methylcyclohexanone-processed BDT-C8-3O HTL that without any dopant delivered world-recorded PCEs of 24.11% (certified of 23.82%) and 23.53%, respectively. The devices also demonstrated remarkable operational and high-temperature stabilities, maintaining over 84% and 79.5% of their initial efficiency for 2000 h, respectively. Encouragingly, dopant-free BDT-C8-3O HTL exhibits significant advantages in large-area fabrication, achieving state-of-the-art PCEs exceeding 20% for 5×5 cm2 modules (active area: 15.64 cm2), even when processed using green solvents.

Efficient N-Type Organic Electrochemical Transistors and Field-Effect Transistors Based on PNDI-Copolymers Bearing Fluorinated Selenophene-Vinylene-Selenophenes.

n-Type organic electrochemical transistors (OECTs) and organic field-effect transistors (OFETs) are less developed than their p-type counterparts. Herein, polynaphthalenediimide (PNDI)-based copolymers bearing novel fluorinated selenophene-vinylene-selenophene (FSVS) units as efficient materials for both n-type OECTs and n-type OFETs are reported. The PNDI polymers with oligo(ethylene glycol) (EG7) side chains P(NDIEG7-FSVS), affords a high µC* of > 0.2Fcm-1 V-1 s-1 , outperforming the benchmark n-type Pg4NDI-T2 and Pg4NDI-gT2 by two orders of magnitude. The deep-lying LUMO of -4.63eV endows P(NDIEG7-FSVS) with an ultra-low threshold voltage of 0.16V. Moreover, the conjugated polymer with octyldodecyl (OD) side chains P(NDIOD-FSVS) exhibits a surprisingly low energetic disorder with an Urbach energy of 36meV and an ultra-low activation energy of 39meV, resulting in high electron mobility of up to 0.32cm2 V-1 s-1 in n-type OFETs. These results demonstrate the great potential for simultaneously achieving a lower LUMO and a tighter intermolecular packing for the next-generation efficient n-type organic electronics.