Oblique Subduction Research Articles

Control of slab tears and slab flat wedging on volcanism in the Alaska subduction zone

Multistage plate subduction plays a crucial role in magmatism; however, the mechanisms by which deep geodynamic processes govern volcanism in the Alaska subduction zone remain controversial. Using numerous travel-time data from several seismic arrays, we constructed high-resolution tomographic models to investigate the velocity structure of the Pacific Plate and Yakutat slab. Our tomographic results revealed high-velocity anomalies in the Pacific Plate and Yakutat slab, while the low-velocity areas within the Pacific Plate were identified as slab tears. We suggest that the Pacific Plate transitioned from oblique subduction along the Aleutian volcano chain to lower-angle subduction beneath the Pacific-Yakutat Plate interaction zone, forming two slab tears that enhance hot asthenosphere materials upwelling. The partial melting of the mantle wedge induced by Pacific slab dehydration and the concurrent upwelling of mantle materials jointly drove volcanism in the transition zone. Conversely, the flat subduction of the Yakutat slab into the mantle wedge overlying the Pacific slab effectively hindered the upwelling of hot hybrid materials, cooling the Pacific mantle wedge. These results offer a new perspective on the influence of slab dynamics on volcanic and magmatic processes in the region and represent an advancement in our understanding compared to previous studies, which did not resolve the tears within the slab or their geodynamic implications at this level of detail.

Northward drift of the Burma Terrane with India during the Cenozoic and implications for the India–Asia collision

The past location of the Burma Terrane during the convergence of the Indian and Asian tectonic plates is key to unravelling the regional geodynamic, palaeoenvironmental and palaeobiogeographical history of the eastern edge of the Himalayan orogen. Palaeomagnetic data provide the ability to constrain the location of the Burma Terrane, but it has been very difficult to find rocks with palaeomagnetic records of primary characteristic remanent magnetizations. We present here new palaeomagnetic results spanning the Paleocene to late middle Eocene within the Burma Terrane, complementing palaeolatitudes previously established from Late Cretaceous intrusive rocks and late middle Eocene sedimentary rocks. Our palaeomagnetic data indicate that the Burma Terrane remained at equatorial latitudes during the Paleocene and early Eocene, at a considerable distance from the South Asian margin. In addition, palaeomagnetic results from mid- to late Eocene sedimentary rocks yield a predominantly north–south orientation of the Burma Terrane over the past 45 Myr, showing that it was not part of the NW–SE-oriented Sundaland margin before its collision with India. Our results support collision models involving a Trans-Tethyan subduction system during the Late Cretaceous and early Paleocene. We propose that this system incorporated the Burmese volcanic arc and continental fragments of Argoland before drifting north with India towards Asia. The new palaeogeographical model considers a reduced amount of oblique subduction of the Indian plate below Burma during the Cenozoic. A possible source of sediments filling the thick Myanmar basins from the Gangdese belt during the Eocene supports the hypothesis of an India–Asia collision around ∼50 Ma. The new palaeogeography supporting the formation of the Myanmar Cretaceous amber on an isolated Trans-Tethyan Arc is also a key element in discussions of the palaeobiogeographical evolution of the numerous faunas it contains.

Inhomogeneous strain partitioning in the Cenozoic Bohai Bay Basin controlled by pre-existing crustal fabrics and oblique subduction: Insights from the Jizhong and Huanghua subbasins

The tectonic features and geodynamics of the Bohai Bay Basin (BBB) have been extensively studied over several decades. It is generally accepted that the Cenozoic BBB was subjected to a superimposed extensional and strike-slip stress field. However, the specific basin-forming mechanism remains ambiguous. Basin-scale studies with high spatial and temporal resolution reveal how strain migrates and localizes during multiphase rifting. Understanding these strain-related processes is crucial for deciphering the formation mechanisms and controlling factors of rift basins. This study investigates the rift-related evolution and strain partitioning in the Jizhong and Huanghua subbasins, the western half of the BBB. Using high-resolution 3D and 2D seismic datasets and well data, we present detailed geological sections, residual thickness maps, and fault systems, showing two distinct patterns of strain partitioning in the Cenozoic. In the Jizhong Subbasin, strain migrated inwards from the NE-trending boundary faults and finally became localized along the NE-trending rift axis; in the Huanghua Subbasin, strain migrated northeastwards from the southern part and then was largely localized along the near E–W-trending faults in the northeastern part. By integrating our results with previous studies of other subbasins, we identify two separate extensional domains within the Cenozoic BBB. The suborthogonal extensional domain in the Jizhong Subbasin is dominated by relatively stable NW–SE extension. In contrast, the extended areas to the east (i.e., the Huanghua, Bozhong, and Liaohe-Liaodongwan subbasins) comprise the oblique extensional domain, characterized by asymmetric transtensional pull-apart deformation and subjected to a clockwise-rotated extensional stress field from NW–SE to NNW–SSE. We suggest that the spatially inhomogeneous strain partitioning in the BBB has developed since the middle Eocene, and was controlled by the interaction of pre-existing crustal fabrics (e.g., the Tan-Lu Fault Zone) and the oblique subduction of the Pacific Plate. The boundary between the two domains may represent a transition zone where the margin-parallel residual velocity component of the oblique convergence decreased considerably landwards. Our study highlights the Cenozoic strain evolution and the associated geodynamics in the BBB, emphasizing the strain complexity within the back-arc rift basin under the oblique subduction background.

Late devonian calc-alkaline high-k fractionated “Ferroan” I-type leucogranites (Rudny Altai)

The paper presents the geological, geochemical and isotope-geochronological studies of the Rudny Altai granitoids in the west of Central Asian Orogenic Belt (CAOB) – the front part of the Altai convergent margin of the Siberian continent. Isotopic U–Pb dating of zircons showed an age range from 367 to 363 Ma. Geochemical characteristics indicate the relevance of leucogranites to calc-alkaline high-K series (SiO2 73 wt.%, Na2O+K2O = 6.9–9 wt.%, Na2O/K2O = 0.7–1.2), with calc-alkaline and alkaline-calcic affinities (MALI = 6.32–8.41). They bear meta- to weakly-peraluminous values (A/CNK = 0.9–1.2), high Fe* index (0.84–0.97) and high fluorine (0.04–0.17 wt.%) content. Variations of HFSEs, LILEs contents, Ga/Al ratios and strong negative A/CNK-P2O5 correlation indicate their affinity with fractionated I-type granitoids. Rare metal (beryllium) mineralization is spatially and genetically related to leucogranites. It is assumed that the formation of granitoids was associated with shearing setting at the convergent margin of the Siberian continent, as a result of oblique subduction of the Irtysh-Zaisan ocean plate.

Internal deformation of the North Andean Sliver in Ecuador-southern Colombia observed by InSAR

Summary In the Northern Andes, partitioning of oblique subduction of the Nazca plate beneath the South American continent induces a northeastward motion of the North Andean Sliver. The strain resulting from this motion is absorbed by crustal faults, which have produced magnitude 7 + earthquakes historically in the Andean Cordillera of Ecuador and southern Colombia. In order to quantify the strain in that area, we derive a high-resolution surface velocity map using InSAR time-series processing. We analyzed 6 to 8 years of Sentinel-1 data and combined different satellite line-of-sight directions to produce a reliable velocity map in the East direction. We use interpolated GNSS data to express the velocity map with respect to Stable South America and remove the long-wavelength pattern due to the post-seismic deformation following the 2016 Mw 7.8 Pedernales earthquake. The InSAR velocity map finds high E-W shortening strain rates along N-S trending structures within the Western Cordillera and the Interandean valley, with little deformation taking place east of them. This result strengthens the previous proposition of a ∼350 km long Quito-Latacunga tectonic block, forming a restraining bend in the overall right-lateral strike-slip fault system accommodating the northeastward escape motion of the North Andean Sliver. However, the high spatial resolution provided by InSAR indicates that previously proposed boundaries for this block need to be revised. In particular, InSAR results highlight high strain rate (>300 nstrain/yr) along undescribed active structures, south and west of the proposed limits for the Quito-Latacunga block, respectively in Peltetec and Ibarra regions. Interestingly, the two areas with the largest strain rates spatially correlate with the proposed areas of large historical earthquakes. Modeling of the InSAR and GNSS velocities in these areas suggests shallow coupling and high slip rates on structures which, previously, were not identified as active. We also demonstrate a slow-down of the shallow aseismic slip on the Quito fault after the Pedernales earthquake, suggesting that stress changes following large megathrust events might trigger transient slip behaviors on crustal faults. The high-resolution strain map provided by this work provides a new basis for future tectonic models in the Ecuadorian and southern Colombian Andes, and will contribute to the seismic hazard assessment in this highly populated area of the Andes.

Opening and Closure of the Sulu Sea: Revealed by Its Peripheral Subduction and Collision Processes

The Sulu Sea is a small marginal sea in the western Pacific, but it is a very complex and tectonically active region, situated amidst the convergence of the Eurasian, Pacific, and India-Australian plates. Deciphering its geodynamic evolution is crucial, but our understanding of its opening, closure, and tectonic history remains inadequate. The main aim of this study was to systematically study the opening and subsequent closure of the Sulu Sea though discerning tectonic unconformities, structural features, and subduction-collision tectonic zones around margins of the sea. The interpreted sections and gravity anomaly data indicate that the NE Sulu Sea has undergone Neogene extension and contraction due to subduction and collision along the northern margins of the Sulu Sea, whereas the SE Sulu Sea gradually extended from northwest to southeast during the Middle Miocene and has subsequently subducted since the Middle Miocene along the southeastern margins of the Sulu Sea. Several subduction and collision boundaries with different characteristics were developed including continent-continent collision, arc-continent collision, and ocean-arc subduction. The different margins of the Sulu Sea showed distinct asynchronous subduction and collision processes. The northern margins of the Sulu Sea can be divided into three subduction-collision tectonic zones from west to east: the Sabah-Nansha block collision has occurred in NE Borneo since the Early Miocene, followed by the SW Palawan-Cagayan arc collision in SW Palawan Island since the Middle Miocene, and the NW Palawan-Mindoro arc collision since the Late Miocene with further oblique subduction of the Philippine Sea Plate. The southeastern margins can also be divided into two subduction tectonic zones from south to east: the SE Sulu Sea has subducted southward beneath the Celebes Sea since the Middle Miocene, followed by the southeastward subduction beneath the Philippine Sea Plate since the Pliocene. Since the Miocene, the interactions among the Australia-India, the Philippine Sea, and the Eurasian plates have formed the circum-Sulu Sea subduction-collisional margins characterized by microplate collisions, deep-sea trough development, and thick sediments filling in the orogenic foreland. This study is significant for gaining insights into the opening and closure of marginal seas and the dynamics of multiple microplates in Southeast Asia.

Tectonic evolution of the eastern margin of the Northern South Yellow Sea Basin in the Yellow Sea since the Late Cretaceous

The South Yellow Sea Basin is the largest sedimentary basin in the Yellow Sea. The Gunsan Basin in the central eastern part of the Northern South Yellow Sea Basin comprises the Western, Central, and Eastern Subbasins. The Eastern Subbasin marks the eastern margin of the South Yellow Sea Basin. Interpretation of multi-channel seismic profiles and balanced cross-section restoration of depth-converted seismic profiles reveal the structural characteristics and evolution of the Eastern Subbasin. The subbasin comprises three groups of faults: NW-SE, NE-SW, and NNE-SSW trending faults. The subsidence pattern of the subbasin, derived from the cross-section restoration analysis, indicates five distinguished evolution phases: (i) rapid subsidence in the Late Cretaceous, (ii) slow subsidence from the Paleocene to the Eocene, (iii) accelerated subsidence in the Oligocene, (iv) alternation of the uplift and subsidence in the Early Miocene, and (v) gradual subsidence since the Middle Miocene. The main and moderate subsidence can be explained by the combination of extension in the SE and NE-SW directions that formed double duplex structures. We suggest that the NW oblique subduction of the Pacific Plate under the NE Asia margin induced both extension toward the trench and dextral strike-slip parallel to the margin. The extension toward the trench caused SE transtension in a local pull-apart setting, whereas the dextral strike-slip parallel to the margin caused NE-SW extension, inducing more significant subsidence. The combined processes resulted in the progressive development of nested duplex structures. The evolution of the Eastern Subbasin is not compatible with previously suggested models for the western part of the South Yellow Sea Basin including foreland basin formation and transtension induced by branch faults of the Tan-Lu Fault.

Geochronology, Geochemical Characterization and Tectonic Background of Volcanic Rocks of the Longjiang Formation in the Lengjimanda Plate Area, Middle Da Hinggan Mountains

The Lengjimanda plate is situated in the middle section of the Da Hinggan mountains, in the eastern section of the Tianshan Xingmeng orogenic belt. To determine the formation age of the volcanic rocks in the Longjiang formation in this area, to explore their origin and tectonic background, and to reconstruct the geodynamic evolution of the region, this study conducted petrological, zircon U–Pb geochronological, geochemical, and isotopic analyses of the volcanic rocks in the Longjiang formation. The Longjiang formation’s volcanic rocks are primarily composed of trachyandesite, trachyte trachydacite, and andesite, which are intermediate basic volcanic rocks. They are enriched in large-ion lithophile elements, are depleted in high-field-strength elements, are significantly fractionated between light and heavy rare earth elements, and exhibit a moderate negative Eu anomaly in most samples. The results of the LA–ICP–MS zircon U–Pb dating indicate that the volcanic rocks in this group were formed in the Early Cretaceous period at 129.1 ± 0.82 Ma. The zircon εHf(t) ranges from +1.13 to +43.77, the tDM2 ranges from +655 to +1427 Ma, the initial Sr ratio (87Sr/86Sr)i ranges from 0.7030 to 0.7036, and the εNd(t) ranges from +2.1 to +6.6. Based on the geochemical compositions and isotopic characteristics of the rocks, the initial magma of the volcanic rocks in the Longjiang formation originated from the partial melting of basaltic crustal materials, with a source material inferred to be depleted mantle-derived young crustal. These rocks were formed in a superimposed post-collisional and continental arc environment, possibly associated with the Mongol-Okhotsk Ocean closure and the oblique subduction of the Pacific plate. This study addresses a research gap regarding the volcanic rocks of the Longjiang formation in this area. Its findings can be applied to exploration and prospecting in the region.

Is the Mesoarchean Mulgandinnah shear zone, Pilbara Craton, the world's oldest arc-slicing transform fault?

Abstract Arc-slicing transform faults represent an integral component of convergent margin tectonics. They are developed above oblique subduction systems, cutting through and displacing the entire magmatic section of arcs, leading to tectonic repetition of segments of the overriding plate in the ensuing orogenic collage. Extant examples clearly show this process in Sumatra, New Zealand, and the Philippines, while ancient examples are reported from the Paleozoic Altaids and Neoarchean Superior and Yilgarn cratons. Here, we report data that document that the Paleo-Mesoarchean Eastern Pilbara craton, recently interpreted to be a preserved mid-upper crustal level of a magmatic arc, is cut and repeated by a major 3.0–2.93 Ga arc-slicing fault, the Mulgandinnah, which sliced a previously 600 × 100 km segment of a Mesoarchean arc system, laterally moving different segments to their presently juxtaposed 200 × 200 km preserved fragment. This evidence demonstrates lateral plate motions by 3.0 Ga and shows oblique subduction, arc plutonism, arc-slicing, and repetition, reflecting that crustal growth in modern-style convergent margins was in full operation by the Mesoarchean.

A note on the seismicity of Sumatra, western Sunda Arc, Indonesia, in relation to the potential for back-arc thrusting

The existence of back-arc thrust faults along the eastern part of the Sunda Arc, ranging westwards from Flores to the western tip of Java, has been recognised for decades. In contrast, it is still unknown whether such back-arc thrust faults exist in Sumatra, which is located in the western part of the Sunda Arc. To investigate the possible existence of back-arc thrusts in Sumatra, we examine regional earthquake data reported by the Agency for Meteorology, Climatology and Geophysics of Indonesia, as well as global earthquake data reported by the International Seismological Centre and the United States Geological Survey. It appears that back-arc thrusts in the study area are not extensively developed, unlike in the eastern Sunda Arc, which may be caused by oblique subduction beneath the Sumatran forearc. The stress associated with the trench-parallel component of subduction is largely accommodated by the ~ 1650-km-long dextral strike-slip fault zone of the Great Sumatran Fault. The seismicity data from various sources do, however, show that there is a dipping seismogenic zone in several parts of the back-arc region of Sumatra, in the opposite direction to the NNE subduction of the Indo-Australian plate. This new observation may be related to the presence of spatially intermittent back-arc thrust faults in the study area, which may need to be taken into account when improving Indonesia's national earthquake hazard maps.

Geomorphic signatures of neotectonic activity along the Western Andean Front in the Chilean Andes (35°S to 37°S)

AbstractCharacterizing neotectonic activity along mountain fronts in active orogens is the key to better understanding trajectories of landscape evolution, climatic‐tectonic couplings and natural hazards. One such prominent mountain front is the Western Andean Front (WAF), which defines the boundary between two main physiographic units along the Chilean Andes (15°S to 39°S): the Central Depression and Principal Cordillera. This study analyses the geomorphic imprints of neotectonic fault activity in the WAF between 35°S and 37°S. We used several topographic metrics, including the mountain‐front sinuosity index (Smf), the valley floor width‐to‐height ratio (Vf) and the stream length‐gradient (SL) index to gain information about the regional distribution of deformation patterns and its relative tectonic activity for distinctive segments. In addition, a raster map combining rock strength (RS) and mean annual precipitation (MAP) allowed discriminating lithology‐climate vs. tectonics influence on SL anomalies from catchments spanning from the main deformation zone to the regional drainage divide. We use the local relief and swath profiles to quantify the incision and transient state of mountain fronts to evaluate the geomorphic response to tectonic and/or climatic input. Our analysis highlights significant variations from north to south, delineating two distinct segments with different topographic, geomorphic and geometric fault characteristics. These segments are indented at approximately 36°S. From north to south, there is a segment with an inactive thrust front with a primarily climate‐driven fluvial response over long timescales and a second segment with a transient state adjusting to relatively high uplift rates. Morphometric data analysis, DEM‐based morpho‐structural maps, geological maps and previous research support the interpretation of two sets of neotectonic faults: (1) NNE‐striking reverse faults with a dextral slip component and (2) NW‐striking sinistral slip faults, likely a response to deformation partitioning caused by oblique subduction on a continental margin.

Strain partitioning in the Patagonian Broken Foreland: influence of structural inheritance of early Andean deformation

In the context of Andean-type oblique convergence, strain partitioning between thrust and strike-slip tectonics is well documented in the arc region. However, the impact of this configuration in the retroarc remains poorly understood, especially in broken foreland systems where basement structures compartmentalize the retroarc into small intermontane sedimentary basins. The spatiotemporal analysis of tectonic evolution and the role of inherited weaknesses in this area are often debated. This study addresses these uncertainties by integrating geometric and kinematic analyses of tectonic structures within the Sañicó Massif in the North Patagonian foreland. Results reveal two deformational episodes. The initial Late Cretaceous to Paleocene episode represents a contractional deformation phase, with NW–SE shortening direction causing the tectonic inversion of pre-Andean rift depocentres. The second episode records a Neogene transpressional regime with both contractional and strike-slip deformation, with east–west to NE–SW shortening direction, which progressed under reactivation of pre-existing structures and generated new faults. This work demonstrates the Neogene propagation of the strike-slip regime towards the retroarc, defining strain partitioning at various scales and highlighting its interaction with pre-existing structures. These results enhance our understanding of the complex tectonic history in oblique subduction settings, providing significant evidence of the structural inheritance in retroarc systems.

New Insights Into Active Faults Revealed by a Deep‐Learning‐Based Earthquake Catalog in Central Myanmar

AbstractMyanmar bears a high risk of destructive earthquakes, yet detailed seismicity catalogs are rare. We designed a deep‐learning‐based data processing pipeline and applied it to the data recorded by a large‐aperture (∼400 km) seismic array in central Myanmar to produce a high‐resolution earthquake catalog. We precisely located 1891 earthquakes at shallow (<50 km) depth, a 2‐fold increase compared to the traditional procedures. The new catalog reveals the Kabaw Fault seismicity disappears south of ∼22.8°N, where the deeper (20–40 km) seismicity appears west of the southern Kabaw Fault. Such seismicity contrast along the strike of the Kabaw Fault possibly implies an along‐strike change of deformation responses to the shortening process by the India plate oblique subduction. The middle segment of the Sagaing Fault is likely locked and prone to hosting large earthquakes according to the derived low b‐value.

New geochemical and age constraints ( 40 Ar/ 39 Ar and U–Pb) on forearc intrusive rocks from the New Caledonia Ophiolite (SW Pacific): diversity of melts generated at hot subduction inception

The New Caledonia Ophiolite is cross-cut by coarse- to medium-grained pyroxenite and hornblende gabbro/diorite dykes intruded between 55.5 and 50 Ma (U–Pb zircon and 40 Ar/ 39 Ar hornblende), whereas the finer grained dolerites of tholeiitic affinity are younger (50–47 Ma). The production of hornblende gabbros/diorites was modelled by moderate degrees (20–40%) of partial melting of the high-temperature amphibolites of the metamorphic sole. The end-member compositions (hornblendites and anorthosites) resulted from solid-state phase segregation of crystal mushes within tectonically active magmatic conduits. Cascade reactions of the slab melts with mantle wedge peridotites successively formed clinoenstatite-bearing boninite magmas, which fed gabbronorite cumulate lenses at the mantle–crust transition; in turn, the clinoenstatite-bearing boninite melts reacted with peridotites to form websterites. The youngest magmas (of tholeiitic affinity) appeared c. 6 Myr after the inception of subduction when the cooler subducting slab plunged more steeply. Incipient slab retreat allowed corner flow, triggering low-pressure hydrous melting of the uplifted asthenosphere. The early stages of forearc magmatism were closely associated with transcurrent shear zones, which recorded oblique subduction inception. The early Eocene tectonic and magmatic features of the New Caledonia Ophiolite provide evidence for a north- or NE-dipping hot (forced) subduction zone in the SW Pacific, notably distinct from the slightly younger west-dipping Izu-Bonin–Marianna cold (spontaneous) subduction system. Supplementary material: Field pictures, additional diagrams, GPS location of dated samples, whole-rock geochemical and isotope data, Ar/Ar data, U–Pb zircon data, and distribution coefficients ( K d ) of trace elements used for modelling are available at https://doi.org/10.6084/m9.figshare.c.6949265 Thematic collection: This article is part of the Ophiolites, melanges and blueschists collection available at: https://www.lyellcollection.org/topic/collections/ophiolites-melanges-and-blueschists

Along‐Arc Volcanism in the Western and Central Aleutian From 2015 to 2021 Revealed by Cloud‐Based InSAR Processing

AbstractLeveraging a cloud‐based interferometric synthetic aperture radar time‐series processing framework, we map the surface deformation along the western and central Aleutian volcanoes from 2015 to 2021. The observed crustal deformation from more than 15 volcanoes is attributed to a wide range of magmatic or tectonic processes, for example, magma accumulation in the magmatic reservoir, steady cooling or degassing of magma or hydrothermal systems, and faulting. More vigorous magmatism in the central Aleutian is noticed and appears to be related to higher magma production rates or higher magma ascent rates as a result of oblique subduction. New deformation patterns never observed in previous studies are detected and modeled at Tanaga, Great Sitkin and Yunaska. This study showcases the cloud‐processing capability to generate interferograms at scale and processing tools to analyze these time series over large, tectonically active areas.

Moho Depth Estimation and The Presence of Subducting Slab in West Sumatra, Jambi, and Riau Islands Regions Using Teleseismic Receiver Function Method: A Preliminary Result

The teleseismic receiver function method was used to investigate the crustal structure in West Sumatra, Jambi, and Riau Islands regions. These regions have a high level of seismicity because it is in an active tectonic zone where the oblique subduction between the Indo-Australian and Eurasian plates occurs. This study aims to determine the depth of Moho discontinuity and the presence of subducting slab beneath 6 BMKG seismic stations that form a line perpendicular to the trench and cover 3 different geological zones. PPSI and RASM are in the forearc zone, SKSM is in the volcanic arc zone, and MBBI, JMBI, and DSRI are in the back-arc zone. This study used teleseismic earthquake record data with epicentral distance between 30°-90° from the receiver and magnitude 6 or more. The iterative time-domain deconvolution and receiver function migration techniques were applied to estimate the depth of Moho discontinuity and the presence of subducting slab. The depth of Moho discontinuity in West Sumatra, Jambi, and Riau Islands regions ranges from 21-39 km and generally deeper in the volcanic arc zone possibly due to the isostatic effect. Moho is at a depth of 21-29 km in the forearc zone, 36-39 km in the volcanic arc zone, and 30-36 km in the back-arc zone. Then the subducting slab was observed at a depth of 20 km under PPSI station to 200 km under MBBI station.

Tensile Fractures and in situ Stress Measurement Data Constraints on Cretaceous–Present Tectonic Stress Field Evolution of the Tanlu Fault Zone in Shandong Province, North China Craton

AbstractTectonic stress fields are the key drivers of tectonic events and the evolution of regional structures. The tectonic stress field evolution of the Tanlu fault zone in Shandong Province, located in the east of the North China Craton (NCC), may have preserved records of the NCC's tectonic history. Borehole television survey and hydraulic fracturing were conducted to analyze the paleo and present tectonic stress fields. Three groups of tensile fractures were identified via borehole television, their azimuths being NNW–SSE, NW–SE and NE–SW, representing multiple stages of tectonic events. Hydraulic fracturing data indicates that the study region is experiencing NEE–SWW‐oriented compression and nearly‐N–S‐oriented extension, in accordance with strike‐slip and compression. Since the Cretaceous, the orientation of the extensional stress has evolved counterclockwise and sequentially from nearly‐NW–SE‐oriented to NE–SW‐oriented and even nearly N–S‐oriented, the stress state having transitioned from strike‐slip‐extension to strike‐slip‐compression, in association with the rotating and oblique subduction of the Pacific Plate beneath the NCC, with the participation of the Indian Plate.

Insights From Layered Anisotropy Beneath Southern New England: From Ancient Tectonism to Present‐Day Mantle Flow

AbstractSeismic anisotropy beneath eastern North America, as expressed in shear wave splitting observations, has been attributed to plate motion‐parallel shear in the asthenosphere, resulting in fast axes aligned with the plate motion. However, deviations of fast axes from plate motion directions are observed near major tectonic boundaries of the Appalachians, indicating contributions from lithospheric anisotropy associated with past tectonic processes. In this study, we conduct anisotropic receiver function (RF) analysis using data from a dense seismic array traversing the New England Appalachians in Connecticut to examine anisotropic layers in the crust and upper mantle and correlate them with past tectonic processes as well as present‐day mantle flow. We use the harmonic decomposition method to separate directionally‐dependent variations of RFs and focus on features with the same harmonic signals observed across multiple stations. Within the crust, there are multiple features that may be correlated with stratification in the Hartford Basin, faults in the Taconic thrust belt, shear zones formed during Salinic/Acadian terrane accretion events, and orogen‐parallel crustal flow in the Acadian orogenic plateau. We apply a Bayesian inversion method to obtain quantitative constraints on the direction and strength of intra‐crustal anisotropy beneath the Hartford Basin. In the upper mantle, we identify a fossil shear zone possibly formed during oblique subduction of Rheic Ocean lithosphere. We also find evidence for a plate motion‐parallel flow zone in the asthenosphere that is likely disturbed by mantle upwelling near the southern margin of the Northern Appalachian Anomaly in the eastern part of the study area.

Anisotropic structure of the normally-dipping and flat slab segments of the Alaska subduction zone: Insights from receiver function analysis

The complex tectonic setting of south-central Alaska is characterized by a transition from normally-dipping subduction of the Pacific plate in the west to near-flat slab subduction of the overthickened Yakutat microplate in the east. Many previous studies have characterized both the isotropic and anisotropic subsurface structure of this region, but only a few studies have characterized anisotropy using receiver functions. Here, we present anisotropy-aware receiver function analysis for two transects of permanent seismic stations in south-central Alaska, one covering a normally-dipping segment of the subduction zone, and one covering the adjacent flat slab segment. Beneath the normally-dipping segment, there is evidence for shearing and possibly serpentinization at the top of the slab in the shallow forearc, and for variation in mantle flow geometry with depth, possibly a result of oblique subduction and/or the adjacent flat slab segment, or an arc magmatism-related process. Additionally, there appears to be significant crustal deformation associated with the volcanic arc. We also identify significant crustal deformation and anisotropy along the flat slab segment, likely a result of the subducting Yakutat microplate, with crustal deformation geometry appearing to vary along the transect. There also appears to be evidence for water-rich conditions at the top of the flat slab, shedding light on the distribution of volatiles in a flat slab setting that lacks an active volcanic arc.

Clockwise rotation of SW Japan and timing of Izanagi–Pacific ridge subduction revealed by arc migration

Igneous rocks associated with the Cretaceous to Paleogene volcanic arc in SW Japan show ages that young from west to east in a direction parallel to the Median Tectonic Line suggesting corresponding translation of a heat source traditionally interpreted in terms of oblique subduction of a spreading ridge. However, recent oceanic plate reconstructions suggest ridge subduction may be younger than the main arc activity. Age compilations of 1227 points of felsic to intermediate Cretaceous and Cenozoic igneous rocks from the Japan arc show arc magmatism that can be separated into an early active period 130–60 Ma (stage 1), a subsequent period of quiescence 60–46 Ma (stage 2), which is followed by a resumption of igneous activity from 46 Ma onward (stage 3). In southwest Japan, the orientations of the magmatic arcs of stages 1 and 3 show and angular discordance of about 20°. The lack of active arc magmatism and the occurrence patterns of adakitic and high-Mg andesitic magmas indicate that ridge subduction occurred during stage 2. The arc age distribution pattern of stage 1 is explained by the slab shallowing related to a younging of the subducting slab as the ridge approaches. Furthermore, the obliquity of the arcs formed at stages 1 and 3 is explained by a 20° clockwise rotation of the inner zone of southwest Japan during the ridge-subduction phase. Oceanic plate reconstructions show counterclockwise rotation in the subduction direction after the ridge subduction phase, and coupling of the subducting oceanic plate with the upper plate would support microplate rotation in the inner zone. The new proposed tectonic reconstructions provide a framework to related Paleogene subduction of an active spreading ridge along the east Asia margin not only to the distribution of granitic bodies but also to rift-related basin formation on the eastern margin of the Eurasian continent and to rotation of crustal blocks indicated by paleomagnetic data of Cretaceous terranes.