Number Of Hydrophobic Contacts Research Articles

Simple Structure-Based Approach for Predicting the Activity of Inhibitors of Beta-Secretase (BACE1) Associated with Alzheimer’s Disease

Beta-site amyloid precursor protein cleaving enzyme-1 (BACE1) is a target of interest for treating patients with Alzheimer's disease (AD). Inhibition of BACE1 may prevent amyloid-ß (Aß) plaque formation and the development or progression of Alzheimer's disease. Known BACE1 inhibitors were analyzed using computational chemistry and cheminformatics techniques to search for quantitative structure-activity relationships (QSAR). A remarkable relationship was found with only two simple descriptors. The square of the linear correlation coefficient r(2) is 0.75. The main descriptor is the number of hydrophobic contacts in the range 4-5 Å between the atoms of the ligand and active site. The other descriptor is the number of short (<2.8 Å) hydrogen bonds. Our approach uses readily available structural data on protein-inhibitor complexes in the Protein Data Bank (PDB) but would be equally applicable to proprietary structural biology data. The findings can aid structure-based design of improved BACE-1 inhibitors. If an inhibitor has less observed activity than predicted by our correlation, the compound should be retested because the first assay may have underestimated the compound's true activity.

Algoritmos evolutivos e modelo HP para predição de estruturas de proteínas

Predição de estruturas de proteínas (PSP) é um problema computacionalmente complexo. Modelos simplificados da molécula proteica (como o Modelo HP) e o uso de Algoritmos Evolutivos (AEs) estão entre as principais técnicas investigadas para PSP. Entretanto, a avaliação de uma estrutura representada pelo Modelo HP considera apenas o número de contatos hidrofóbicos, não possibilitando distinguir entre estruturas com o mesmo número de contatos hidrofóbicos. Neste trabalho, é apresentada uma nova formulação multiobjetivo para PSP em Modelo HP. Duas métricas são avaliadas: o número de contatos hidrofóbicos e a distância entre os aminoácidos hidrofóbicos, as quais são tratados pelo AE Multiobjetivo em Tabelas (AEMT). O algoritmo mostrou-se rápido e robusto.

Solution Structure of the PilZ Domain Protein PA4608 Complex with Cyclic di-GMP Identifies Charge Clustering as Molecular Readout

Cyclic diguanosine monophosphate (c-di-GMP) is a ubiquitous bacterial second messenger that controls the switch from a single-cell lifestyle to surface-attached, multicellular communities called biofilms. PilZ domain proteins are a family of bacterial c-di-GMP receptors, which control various cellular processes. We have solved the solution structure of the Pseudomonas aeruginosa single-domain PilZ protein PA4608 in complex with c-di-GMP by NMR spectroscopy. Isotope labeling by (13)C and (15)N of both the ligand and the protein made it possible to define the structure of c-di-GMP in the complex at high precision by a large number of intermolecular and intraligand NOEs and by two intermolecular hydrogen bond scalar couplings. Complex formation induces significant rearrangements of the C- and N-terminal parts of PA4608. c-di-GMP binds as an intercalated, symmetric dimer to one side of the β-barrel, thereby displacing the C-terminal helix of the apo state. The N-terminal RXXXR PilZ domain motif, which is flexible in the apo state, wraps around the ligand and in turn ties the displaced C terminus in a loose manner by a number of hydrophobic contacts. The recognition of the dimeric ligand is achieved by numerous H-bonds and stacking interactions involving residues Arg(8), Arg(9), Arg(10), and Arg(13) of the PilZ motif, as well as β-barrel residues Asp(35) and Trp(77). As a result of the rearrangement of the N and C termini, a highly negative surface is created on one side of the protein complex. We propose that the movement of the termini and the resulting negative surface form the basis for downstream signaling.

BINANA: A novel algorithm for ligand-binding characterization

Computational chemists and structural biologists are often interested in characterizing ligand–receptor complexes for hydrogen-bond, hydrophobic, salt-bridge, van der Waals, and other interactions in order to assess ligand binding. When done by hand, this characterization can become tedious, especially when many complexes need be analyzed. In order to facilitate the characterization of ligand binding, we here present a novel Python-implemented computer algorithm called BINANA (BINding ANAlyzer), which is freely available for download at http://www.nbcr.net/binana/. To demonstrate the utility of the new algorithm, we use BINANA to confirm that the number of hydrophobic contacts between a ligand and its protein receptor is positively correlated with ligand potency. Additionally, we show how BINANA can be used to search through a large ligand–receptor database to identify those complexes that are remarkable for selected binding features, and to identify lead candidates from a virtual screen with specific, desirable binding characteristics. We are hopeful that BINANA will be useful to computational chemists and structural biologists who wish to automatically characterize many ligand–receptor complexes for key binding characteristics.

Der p 5 Crystal Structure Provides Insight into the Group 5 Dust Mite Allergens

Group 5 allergens from house dust mites elicit strong IgE antibody binding in mite-allergic patients. The structure of Der p 5 was determined by x-ray crystallography to better understand the IgE epitopes, to investigate the biologic function in mites, and to compare with the conflicting published Blo t 5 structures, designated 2JMH and 2JRK in the Protein Data Bank. Der p 5 is a three-helical bundle similar to Blo t 5, but the interactions of the helices are more similar to 2JMH than 2JRK. The crystallographic asymmetric unit contains three dimers of Der p 5 that are not exactly alike. Solution scattering techniques were used to assess the multimeric state of Der p 5 in vitro and showed that the predominant state was monomeric, similar to Blo t 5, but larger multimeric species are also present. In the crystal, the formation of the Der p 5 dimer creates a large hydrophobic cavity of approximately 3000 A(3) that could be a ligand-binding site. Many allergens are known to bind hydrophobic ligands, which are thought to stimulate the innate immune system and have adjuvant-like effects on IgE-mediated inflammatory responses.

Controlled adsorption-desorption of cationic polymers on the surface of anionic latex particles

The complexation of anionic latex particles with two series of cationic copolymers is studied. The copolymers of the first series contain cationic and electroneutral (zwitter ion) hydrophilic units. The electrostatic adsorption of these copolymers on the surface of latex particles is accompanied by the formation of multiple salt bridges between cationic copolymer units and surface anionic groups. The dependence of ultimate adsorption on the molar fraction of cationic groups in copolymer α is described by a bell-shaped curve with a maximum at α = 0.05−0.10 and a long horizontal portion at α > 0.24. In terms of the adsorption theory of polyampholytes, such a pattern of the adsorption curve results from the compromise between the attraction of polymer chains to the surface induced by their polarization in the electric field of particles and the repulsion of like charged macromolecular units. The stability of complexes with the copolymers of the first series in water-salt media increases with an increase in α. The copolymers of the second series contain cationic and hydrophobic units. In this case, an increase in α is accompanied by a decrease in the amount of the adsorbed polymer throughout the studied α range (0.24–1). The complexes are stabilized not only via electrostatic interactions but also via hydrophobic interactions. A decrease in α decreases the role of electrostatics in stabilization of the complexes; however, this effect is compensated for by an increase in the number of hydrophobic contacts. This allows the stability of complexes to be preserved in concentrated water-salt solutions. The results of this study indicate that the stability of interfacial layers with the participation of cationic copolymers can be changed in a wide range by varying the ratio of ionic and electroneutral (hydrophilic or hydrophobic) comonomers in macromolecules.

Identification of a Mechanical Rheostat in the Hydrophobic Core of Protein L

The ability of proteins and their complexes to withstand or respond to mechanical stimuli is vital for cells to maintain their structural organisation, to relay external signals and to facilitate unfolding and remodelling. Force spectroscopy using the atomic force microscope allows the behaviour of single protein molecules under an applied extension to be investigated and their mechanical strength to be quantified. protein L, a simple model protein, displays moderate mechanical strength and is thought to unfold by the shearing of two mechanical sub-domains. Here, we investigate the importance of side-chain packing for the mechanical strength of protein L by measuring the mechanical strength of a series of protein L variants containing single conservative hydrophobic volume deletion mutants. Of the five thermodynamically destabilised variants characterised, only one residue (I60V) close to the interface between two mechanical sub-domains was found to differ in mechanical properties to wild type (ΔFI60V–WT=−36 pN at 447 nm s−1, ΔxuI60V–WT=0.2 nm). Φ-value analysis of the unfolding data revealed a highly native transition state. To test whether the number of hydrophobic contacts across the mechanical interface does affect the mechanical strength of protein L, we measured the mechanical properties of two further variants. protein L L10F, which increases core packing but does not enhance interfacial contacts, increased mechanical strength by 13±11 pN at 447 nm s−1. By contrast, protein L I60F, which increases both core and cross-interface contacts, increased mechanical strength by 72±13 pN at 447 nm s−1. These data suggest a method by which nature can evolve a varied mechanical response from a limited number of topologies and demonstrate a generic but facile method by which the mechanical strength of proteins can be rationally modified.

Modulation of protein stability by O-glycosylation in a designed Gc-MAF analog

The post-translational modification of proteins by the covalent attachment of carbohydrates to specific side chains, or glycosylation, is emerging as a crucial process in modulating the function of proteins. In particular, the dynamic processing of the oligosaccharide can correlate with a change in function. For example, a potent macrophage-activating factor, Gc-MAF, is obtained from serum vitamin D binding protein (VDBP) by stepwise processing of the oligosaccharide attached to Thr 420 to the core α-GalNAc moiety. In previous work we designed a miniprotein analog of Gc-MAF, MM1, by grafting the glycosylated loop of Gc-MAF on a stable scaffold. GalNAc-MM1 showed native-like activity on macrophages (Bogani 2006, J. Am. Chem. Soc. 128 7142–43). Here, we present data on the thermodynamic stability and conformational dynamics of the mono- and diglycosylated forms. We observed an unusual trend: each glycosylation event destabilized the protein by about 1 kcal/mol. This effect is matched by an increase in the mobility of the glycosylated forms, as evaluated by molecular dynamics simulations. An analysis of the solvent-accessible surface area shows that glycosylation causes the three-helix bundle to adopt conformations in which the hydrophobic residues are more solvent exposed. The number of hydrophobic contacts is also affected. These two factors, which are ultimately explained with a change in occupancy for conformers of specific side chains, may contribute to the observed destabilization.

Conformational flexibility in T4 endonuclease VII revealed by crystallography: implications for substrate binding and cleavage

The structure of the N62D mutant of the junction-resolving endonuclease VII (EndoVII) from phage T4 has been refined at 1.3 Å, and a second wild-type crystal form solved and refined at 2.8 Å resolution. Comparison of the mutant with the wild-type protein structure in two different crystal environments reveals considerable conformational flexibility at the dimer level affecting the substrate-binding cleft, the dimerization interface and the orientation of the C-terminal domains. The opening of the DNA-binding cleft, the orientation of the C-terminal domains relative to the central dimerization domain as well as the relative positioning of helices in the dimerization interface appear to be sensitive to the crystal packing environment. The highly unexpected rearrangement within the extended hydrophobic interface does change the contact surface area but keeps the number of hydrophobic contacts about the same and will therefore not require significant energy input. The conformational flexibility most likely is of functional significance for the broad substrate specificity of EndoVII. Binding of sulphate ions in the mutant structure and their positions relative to the active-site metal ions and residues known to be essential for catalysis allows us to propose a possible catalytic mechanism. A comparison with the active-site geometries of other magnesium-dependent nucleases, among them the homing endonuclease I-PpoI and Serratia endonuclease, shows common features, suggesting related catalytic mechanisms.