Opposite Polarity Research Articles

Reversal of polarity in YSZ-based thin film potentiometric oxygen sensors

Reversal of polarity in YSZ-based thin film potentiometric oxygen sensors

Revealing the Role of Spacer Layer in Domain Dynamics of Hf0.5Zr0.5O2 Thin Films for Ferroelectrics

AbstractHfO2‐based ferroelectrics offer promises for next‐generation nonvolatile nanoscale devices owing to excellent CMOS compatibility and robust ferroelectricity at the nanoscale. However, fundamentally understanding the mechanism of polarization reversal and domain dynamics is challenging because the role of the spacer layer at the domain level in HfO2‐based ferroelectrics remains elusive. Here, it is realized that visualization of time‐resolved dynamics of nanoscale domain configurations in the epitaxial Hf0.5Zr0.5O2 thin films using phase‐field simulations. Scale‐free domain independent switchability (namely, irreducible stable polar domain down to 1 nm lateral size) and sharp domain walls that originate from weak interactions between adjacent domains characterized by the reduced gradient energy coefficient, which unravels the mesoscale mechanism of spacer layer in domain dynamics are demonstrated. Meanwhile, it is revealed that 180° polarization switching is dominated by the nucleation of a new domain with a high nucleation density, well described by the nucleation‐limited switching model. This study not only provides a fundamental mesoscale mechanism of the spacer layer, but also stimulates further studies on the manipulation of ultra‐scaled single domain state for designing high‐density and fast‐speed HfO2‐based ferroelectric memory.

Theoretico-experimental analysis of bistability in the oscillatory response of a TaOx ReRAM to pulse train stimuli

Fading memory is the capability of a physical system to approach a unique asymptotic behaviour, irrespective of the initial conditions, when stimulated by an input from a certain class. Standard stimuli from the AC periodic class typically induce fading memory effects in non-volatile memristors, as uncovered for the first time back in 2016. Very recently, a deep investigation of resistance switching phenomena in a TaOx resistive random access memory cell revealed the capability of the nano-device to exhibit one of two possible oscillatory behaviours, depending upon the initial condition, when subject to a particular periodic excitation. This interesting finding was, however, left unexplained. Bistability is the simplest form of local fading memory. In a system, endowed with local fading memory under a given stimulus, the initial condition does not affect the long-term behaviour of the state as long as it is drawn from the basin of attraction of either of the distinct coexisting state-space attractors (two limit cycles for the periodically forced memristor acting as a bistable oscillator). Here, the history of the system, encoded in the initial condition, is, thus, erasable only locally through ad hoc stimulation. Motivated by the discovery of local history erase effects in our resistive random access memory cell, this study applies a powerful system-theoretic tool, enabling the analysis of the response of first-order systems to square pulse train-based periodic stimuli, known as the time-average state dynamic route, to an accurate physics-based mathematical model, earlier fitted to the nano-device, to determine a strategy for specifying the parameters of an excitation signal, consisting of the sequence of two square pulses of opposite polarity per period so as to induce various forms of monostability or multistability in the non-volatile memristor. In particular, as an absolute novelty in the literature, experimental measurements validate the theoretical prediction on the capability of the device to operate as one of two distinct oscillators, depending upon the initial condition, under a specific pulse train excitation signal. The coexistence of multiple oscillatory operating modes in the periodically forced resistive random access memory cell, an example par excellence of their unique non-linear dynamics, may inspire the development and circuit implementation of novel sensing and mem-computing paradigms.

Electrochemical ocean iron fertilization and alkalinity enhancement approach toward CO2 sequestration

Achieving net-zero emissions by 2050 requires the development of effective negative emission techniques, including ocean-based approaches for CO2 sequestration. However, the implementation and testing of marine CO2 removal (mCDR) techniques such as ocean iron fertilization (OIF) or ocean alkalinity enhancement (OAE) face significant challenges. Herein, a novel self-operating electrochemical technology is presented that not only combines OIF and OAE, but also recovers hydrogen gas (H2) from seawater, hence offering a promising solution for achieving quantifiable and transparent large-scale mCDR. Experimental results show that the electrochemical OIF (EOIF) can not only increase the concentration of ferrous iron (Fe+2) by 0–0.5 mg/L, but also significantly increases the seawater pH by 8% (i.e., a 25% decrease in the hydrogen ions concentration). The release of iron (Fe+2/Fe+3) can be regulated by adjusting the magnitude of the electric current and its form (e.g., pulsed current and polarity reversal), as well as by optimizing the electrode material and geometry. In certain ocean regions, enhanced iron concentrations stimulate the naturally occurring biological carbon pump (BCP), leading to increased phytoplankton growth, CO2 uptake, and subsequent export of carbon to the deep ocean. Simultaneously, the system increases seawater alkalinity and the buffer capacity, enhancing CO2 solubility and storage in the shallow ocean through the solubility pump. The obtained measurements demonstrate the scalability of EOIF and its ability to operate using solar energy at a lower cost. Overall, the proposed EOIF technology offers a practical, effective, and sustainable solution for addressing climate change on a large scale.

Experimental and Simulation Studies on Stable Polarity Reversal in Aged HVDC Mass-Impregnated Cables

Mass-impregnated (MI) cables have been used for many years as cables in high-voltage direct current (HVDC) systems. In line commutated converter (LCC) HVDC systems, polarity reversal for power flow control can induce significant electrical stress on MI cables. Furthermore, the mass oil and kraft paper comprising the impregnated insulation have significantly different coefficients of thermal expansion. Load fluctuations in the cable lead to expansion and contraction of the mass, creating pressure within the insulation and causing redistribution of the impregnant. During this process, shrinkage cavities can form within the butt gaps. Since the dielectric strength of the cavities is lower than that of the surrounding impregnation, cavitation phenomena in impregnated paper insulation are considered a factor in degrading insulation performance. Consequently, this study analyzes the electrical conductivity of thermally aged materials and investigates the transient electric field characteristics within the cable. Additionally, it closely analyzes the formation and dissolution of cavities in MI cables during polarity reversal based on a numerical model of pressure behavior in porous media. The conductivity of the impregnated paper indicates that it has excellent resistance to thermal degradation. Simulation results for various load conditions highlight that the interval of load-off time and the magnitude of internal pressure significantly influence the cavitation phenomenon. Lastly, the study proposes stable system operation methods to prevent cavitation in MI cables.

Achieving Ultrahigh Electrocaloric Response in (Bi0.5Na0.5)TiO3-Based Ceramics through B-Site Defect Engineering.

Lead-free electrocaloric (EC) ferroelectrics are considered ideal for the next generation of environmentally friendly solid-state refrigeration materials. However, their inferior performance compared to lead-based materials significantly restricts their potential application. According to phase-field simulations, it is predicted that the pinning effect of a moderate number of defects can effectively enhance the reversible polarization response associated with the entropy change. Herein, sodium-bismuth titanate (BNT) ceramics with high spontaneous polarization are selected to construct B-site defects by introducing Li+ and Nb5+. Under an electric field of 6 kV mm-1, ultrahigh EC temperature changes of ΔTpos = 1.77 and ΔTneg = 1.49 K are achieved at 65 °C by direct measurement (ΔTneg > 1 K over 55-120 °C). Furthermore, ΔTneg remains above 0.70 K in the temperature range from 25 to 130 °C, exhibiting immense potential for practical applications. This study offers a promising direction for optimizing the EC response in defect systems.

A novel split PEC sensor based on magneto–optic nanostructure and photocurrent polarity switching strategy

BackgroundPhotoelectrochemical (PEC) sensors have attracted much attention due to their low cost, simple instrumentation and high sensitivity. However, conventional PEC sensors require layer–by–layer modification of the photoelectrode surface, which has the disadvantages of being time–consuming and unstable. In addition, complex interfering substances in real samples may lead to false–positive or false–negative detection results. It was thought that the above drawbacks could be eliminated by the construction of a polarity inversion PEC sensor. In this work, a magnetically separated PEC sensor was constructed for the detection of Carcinoembryonic antigen (CEA). ResultsDuring the experiment, the construction of the sensor was used for sensitive detection of CEA. In the experimental process, Fe3O4@SiO2@CdS, a semiconductor material with magnetic properties, was chosen as the substrate material, and ZnO/CuO was used as the marker on the DNA2 molecule, and a split magnetic separation PEC sensor was constructed, which was used to realize the sensitive detection of CEA. Eventually, the detection range of the sensor for CEA detection is 1–10000 pg/mL, with the detection limit of 0.34 pg/mL. Additionally, the PEC sensor has the advantages of high speed, high efficiency, high sensitivity, good specificity, and high stability. The sensing platform constructed in this work can also be extended to detect other targets, which provides a new idea for PEC sensing platforms. SignificanceIn this experiment, we developed a split PEC immunosensor based on magneto–optic nanostructure and photocurrent polarity switching strategy. Specifically, the proposed magnetic nanostructure Fe3O4@SiO2@CdS–DNA1 exhibits good paramagnetism and dispersion ability. By magnetic separation process, the PEC signals of opposite polarity can be obtained.

Atomic-level polarization reversal in sliding ferroelectric semiconductors

Intriguing “slidetronics” has been reported in van der Waals (vdW) layered non-centrosymmetric materials and newly-emerging artificially-tuned twisted moiré superlattices, but correlative experiments that spatially track the interlayer sliding dynamics at atomic-level remain elusive. Here, we address the decisive challenge to in-situ trace the atomic-level interlayer sliding and the induced polarization reversal in vdW-layered yttrium-doped γ-InSe, step by step and atom by atom. We directly observe the real-time interlayer sliding by a 1/3-unit cell along the armchair direction, corresponding to vertical polarization reversal. The sliding driven only by low energetic electron-beam illumination suggests rather low switching barriers. Additionally, we propose a new sliding mechanism that supports the observed reversal pathway, i.e., two bilayer units slide towards each other simultaneously. Our insights into the polarization reversal via the atomic-scale interlayer sliding provide a momentous initial progress for the ongoing and future research on sliding ferroelectrics towards non-volatile storages or ferroelectric field-effect transistors.

Molecular beam epitaxy and characterization of ferroelectric quaternary alloy Sc0.2Al0.45Ga0.35N

In this study, we demonstrate ferroelectricity in high-quality monocrystalline quaternary alloy ScAlGaN. Sc0.2Al0.45Ga0.35N films are grown by plasma-assisted molecular beam epitaxy and exhibit a surface roughness of 0.5 nm, limited by the roughness of the underlying molybdenum template. Polarization-electric field and positive-up-negative-down measurements reveal unambiguous ferroelectric switching with a coercive field of ∼5.5 MV cm−1 at 10 kHz and high remanent polarization of ∼150 μC cm−2. Time-dependent measurements suggest that the polarization reversal behavior adheres to the Kolmogorov–Avrami–Ishibashi model and follows a scheme of domain nucleation and growth. Detailed piezoresponse force microscopy studies further elucidate the evolution of polarity reversal domains in wurtzite nitride ferroelectrics and support the notion that the growth of inversion domains occurs via an in-plane motion of the domain walls. The realization of functional ferroelectric quaternary alloys in the wurtzite nitride family extends beyond being a technical demonstration. The additional degree of bandgap, band alignment, lattice parameter, and piezoelectric constant tunability achievable through quaternary alloys unveils a vast dimension through which wurtzite nitride ferroelectrics can be optimally engineered for a broad variety of high-performance electronic, optoelectronic, and acoustic devices and systems.

Strain-induced ferromagnetism and magneto-electric coupling in two-dimensional ferroelectric ZnIn2S4

Two-dimensional (2D) multiferroic materials are currently in high demand due to their significant potential for applications in the field of high-density data storage devices. However, due to the different requirements for generating ferroelectricity and magnetism, 2D multiferroic materials are rare. In this study, we propose that applying strain can induce magnetism in 2D ferroelectric materials with special electronic structures, thereby creating 2D multiferroics. Taking 2D ZnIn2S4 as an example, it shows robust ferroelectricity with an appropriate switching barrier (79.3 meV), and the out-of-plane ferroelectric polarization is 0.0322 C/m2. Applying biaxial tensile strain can change the energy of the flatband near the Fermi level, ultimately resulting in self-doping phenomena and leading to Stoner-type itinerant ferromagnetism. The reversal of ferroelectric polarization in ZnIn2S4 bilayer and ZnIn2S4–In2Se3 heterostructure can manipulate the magnetic moment of the system, exhibiting significant magnetoelectric coupling phenomena. Our findings provide a pathway for designing 2D ferromagnetic and multiferroic materials.

Restricting Conformational Space: A New Blueprint for Electrically Switchable Self-Assembled Monolayers.

Tunnel junctions comprising self-assembled monolayers (SAMs) from liquid crystal-inspired molecules show a pronounced hysteretic current-voltage response, due to electric field-driven dipole reorientation in the SAM. This renders these junctions attractive device candidates for emerging technologies such as in-memory and neuromorphic computing. Here, the novel molecular design, device fabrication, and characterization of such resistive switching devices with a largely improved performance, compared to the previously published work are reported. Those former devices suffer from a stochastic switching behavior limiting reliability, as well as from critically small read-out currents. The present progress is based on replacing Al/AlOx with TiN as a new electrode material and as a key point, on redesigning the active molecular material making up the SAM: a previously present, flexible aliphatic moiety has been replaced by a rigid aromatic linker, thereby introducing a molecular "ratchet". This restricts the possible molecular conformations to only two major states of opposite polarity. The above measures have resulted in an increase of the current density by five orders of magnitude as well as in an ON/OFF conductance ratio which is more than ten times higher than the individual scattering ranges of the high and low resistance states.

A Magnetic Actuator Device for Fully Automated Blinking in Total Bidirectional Eyelid Paralysis: First Proof of Concept in a Human Participant.

Currently, no solution exists to restore natural eyelid kinematics for patients with complete eyelid paralysis due to loss of function of both the levator palpebrae superioris and orbicularis oculi. These rare cases are prone to complications of chronic exposure keratopathy which may lead to corneal blindness. We hypothesized that magnetic force could be used to fully automate eyelid movement in these cases through the use of eyelid-attached magnets and a spectacle-mounted magnet driven by a programmable motor (motorized magnetic levator prosthesis [MMLP]). To test this hypothesis and establish proof of concept, we performed a finite element analysis (FEA) for a prototype MMLP to check the eyelid-opening force generated by the device and verified the results with experimental measurements in a volunteer with total bidirectional eyelid paralysis. The subject was then fitted with a prototype to check the performance of the device and its success. With MMLP, eye opening was restored to near normal, and blinking was fully automated in close synchrony with the motor-driven polarity reversal, with full closure on the blink. The device was well tolerated, and the participant was pleased with the comfort and performance. FEA simulation results conformed to the experimentally observed trend, further supporting the proof of concept and design parameters. This is the first viable approach in human patients with proof of concept for complete reanimation of a bidirectionally paretic eyelid. Further study is warranted to refine the prototype and determine the feasibility and safety of prolonged use. This is first proof of concept for our device for total bidirectional eyelid paralysis.

Effect of polarization force on Gardner multi solitons and breather solitons traits in opposite polarity dusty plasma

Effect of polarization force on Gardner multi solitons and breather solitons traits in opposite polarity dusty plasma

Robust in-plane ferroelectricity, high hole mobility, and low thermal conductivity in GeO monolayer: A first-principles study

Motivated by the experimental advancements in 2D crystalline germanium oxides, we investigated the electronic and transport properties of GeO and GeO2 monolayers (MLs) using first-principles calculations. GeO ML exhibits an in-plane ferroelectricity until the melting point of 1100 K. Compressive strain facilitates polarization reversion by lowering the ferroelectric transition barrier. The band edges meet the requirements for photocatalytic water splitting across a wide variety of strains. Meanwhile, GeO ML has a high hole mobility of 4854 cm2/V⋅s along the y-axis, owing to its low deformation potential constant. The large difference in hole and electron mobility promotes electron–hole separation. In addition, GeO ML has a low thermal conductivity of κx = 3.37 W/mK and κy = 12.53 W/mK at 300 K, due to the strong anharmonicity caused by lone-pair electrons. In contrast, GeO2 ML has an isotropic electron mobility of 382 cm2/V⋅s and an κ of 22.60 W/mK at 300 K. At last, we discussed the probable reaction to grow 2D GeO crystal and calculated the Raman intensity to distinguish it in future experiments. Our results show that 2D GeO has potential applications in ferroelectrics, thermoelectrics, and water splitting.

60Co-γ Irradiation-Induced Shift and Polarity Reversal in the Triboelectric Series of Poly(ether sulfone)s.

The sensitivity of triboelectric nanogenerators (TENGs) to the surface charge density highlights the significance of triboelectric materials and their modifications. Efforts have been directed toward developing effective strategies for increasing the surface charge density, expanding the potential applications of TENGs. This study proposes the use of irradiation technology for grafting to modify the electron-donating capability of poly(ether sulfone) (PES), thereby affording a dual benefit of enhancing the surface charge density and inducing a shift in the position of PES from negative to positive within the triboelectric series. The TENG based on grafted PES has resulted in a significant 3-fold increase in surface charge density compared to that of pristine PES, reaching 263 μC m-2. The surface charge density can be further increased to 502 μC m-2 through charge pumping. Notably, irradiation technology presents advantages over chemical grafting methods, particularly in terms of sustainability and environmental friendliness. This innovative approach shows great potential in advancing the domain of TENGs.

Analysis of BMR Tilt from AutoTAB Catalog: Hinting toward the Thin Flux Tube Model?

One of the intriguing mechanisms of the Sun is the formation of bipolar magnetic regions (BMRs) in the solar convection zone (CZ), which are observed as regions of concentrated magnetic fields of opposite polarity on the photosphere. These BMRs are tilted with respect to the equatorial line, which statistically increases with latitude. The thin flux tube model, employing the rise of magnetically buoyant flux loops and their twist by Coriolis force, is a popular paradigm for explaining the formation of tilted BMRs. In this study, we assess the validity of the thin flux tube model by analyzing the tracked BMR data obtained through the Automatic Tracking Algorithm for BMRs. Our observations reveal that the tracked BMRs exhibit the expected collective behaviors. We find that the polarity separation of BMRs increases over their normalized lifetime, supporting the assumption of a rising flux tube from the CZ. Moreover, we observe an increasing trend of the tilt with the flux of the BMR, suggesting that rising flux tubes associated with lower flux regions are primarily influenced by drag force and Coriolis force, while in higher flux regions, magnetic buoyancy dominates. Furthermore, we observe Joy’s law dependence for emerging BMRs from their first detection, indicating that at least a portion of the tilt observed in BMRs can be attributed to the Coriolis force. Notably, lower flux regions exhibit a higher amount of fluctuations associated with their tilt measurement compared to stronger flux regions, suggesting that lower flux regions are more susceptible to turbulent convection.

Emx2 lineage tracing reveals antecedent patterns of planar polarity in the mouse inner ear.

The planar polarized organization of hair cells in the vestibular maculae is unique because these sensory organs contain two groups of cells with oppositely oriented stereociliary bundles that meet at a Line of Polarity Reversal (LPR). EMX2 is a transcription factor expressed by one hair cell group that reverses the orientation of their bundles, thereby forming the LPR. We generated Emx2-CreERt2 transgenic mice for genetic lineage tracing and demonstrate Emx2 expression before hair cell specification when the nascent utricle and saccule constitute a continuous prosensory domain. Precursors labeled by Emx2-CreERt2 at this stage give rise to hair cells located along one side of the LPR in the mature utricle or saccule indicating that this boundary is first established in the prosensory domain. Consistent with this, Emx2-CreERt2 lineage tracing in Dreher mutants where the utricle and saccule fail to segregate, labels a continuous field of cells along one side of a fused utriculo-saccular-cochlear organ. These observations reveal that LPR positioning is pre-determined in the developing prosensory domain, and that EMX2 expression defines lineages of hair cells with oppositely oriented stereociliary bundles.

Initial oceanic subduction triggered by arc–continent collision: An example from the convergence between the Paleo-Asian Ocean and the North China Craton

The driving mechanisms for initial oceanic subduction beneath a passive continental margin remain unclear. The Paleozoic convergence history between the North China Craton (NCC) and the Paleo-Asian Ocean provides an ideal opportunity to investigate the driving mechanisms of the onset of oceanic subduction. Our detrital zircon U–Pb dating results yield Middle Devonian to Permian ages (391–273 Ma) in Paleozoic strata within China's Aoji region, specifically in the Bainaimiao arc belt situated between the NCC and Central Asian Orogenic Belt (CAOB). Detrital zircon age spectra, εHf(t) values, and two-stage model ages of the Devonian to Permian sediments suggest zircon contributions from both the NCC and CAOB. Combined with data from various regions along the Bainaimiao arc belt, findings suggest that the Bainaimiao island arc was accreted to the northern margin of the NCC through arc–continent collision during the late Silurian, rendering the NCC margin passive until the end-Devonian. At this point, southward subduction in the Paleo-Asian Ocean beneath the NCC commenced and continued into the Permian, transforming the northern margin of the NCC from passive to active. This initial subduction (ca. 359 Ma) in the Paleo-Asian Ocean resulted from collision-induced magmatism and deformation due to the protracted convergence and also led to a reversal in subduction polarity. Subsequently, in response to Paleo-Asian Ocean subduction, the northern margin of the NCC underwent rapid uplift during the Carboniferous, which led to widespread exposure of the NCC basement rocks in the late Carboniferous.

Regionally-triggered geomagnetic reversals

Systematic studies of numerical dynamo simulations reveal that the transition from dipole-dominated non-reversing fields to models that exhibit reversals occurs when inertial effects become strong enough. However, the inertial force is expected to play a secondary role in the force balance in Earth’s outer core. Here we show that reversals in numerical dynamo models with heterogeneous outer boundary heat flux inferred from lower mantle seismic anomalies appear when the amplitude of heat flux heterogeneity is increased. The reversals are triggered at regions of large heat flux in which strong small-scale inertial forces are produced, while elsewhere inertial forces are substantially smaller. When the amplitude of heat flux heterogeneity is further increased so that in some regions sub-adiabatic conditions are reached, regional skin effects suppress small-scale magnetic fields and the tendency to reverse decreases. Our results reconcile the need for inertia for reversals with the theoretical expectation that the inertial force remains secondary in the force balance. Moreover, our results highlight a non-trivial non-monotonic behavior of the geodynamo in response to changes in the amplitude of the core-mantle boundary heat flux heterogeneity.

The Hasli Formation of the Irchel Plateau – A key record for older Early Pleistocene interglacial sediments in northern Switzerland

In the Alpine region of Central Europe, terrestrial Early Pleistocene deposits with preserved faunal and botanical remains are rare. The predominantly gravelly Höhere Deckenschotter (HDS) deposits of northern Switzerland and adjoining south-western Germany are considered the oldest Quaternary sediments in the northern Alpine Foreland, linked with the first extensive Quaternary Alpine glaciations.This multidisciplinary study investigates the Hasli Formation (HF), a unique silty unit with well-preserved biological remains within an HDS sequence at the Irchel Plateau north of Zürich, providing new climatic and environmental data for these exceptional deposits, as well as crucial information about their age. Systematic mapping of the HF, in addition to the underlying and covering gravel units, has been coupled with sedimentary logging and biostratigraphic analysis at several sites. The HF is present over an area c.4 by up to 1.4 km, and where studied is 1.6–6.2 m thick. The sediments and biological material are indicative of overbank deposits accumulating within the damp floodplain of a large meandering river.The recovered small mammal remains are from eight arvicolid species or genera, including Mimomys pliocaenicus, M. reidi/tigliensis and Clethrionomys cf. kretzoii, which became extinct c.1.8 Ma, and Pliomys episcopalis/simplicior, which first appeared c.2 Ma ago. The over 75k identified molluscs, include c.72k coming from 89 terrestrial species and over 3k from 28 aquatic taxa. The molluscan faunas from all locations where the HF has been studied share important biostratigraphic marker species, and indicate analogous climatic and environmental conditions. The marker species include several that became extinct during the Early Pleistocene, of which Clausilia stranzendorfensis and Cochlostoma salomoni, present throughout the HF, are the most important as they disappeared c.1.8 Ma. Many marker species have modern or palaeo-distributions that lie far to the west, south and east of the Swiss Plateau, showing that the climate was much warmer than today, typical for the Tiglian warm stage. The alluvial floodplain was covered by rather dense, mature woodland.Amino acid (AA) analysis shows that molluscan remains from the HF are among the oldest of the Quaternary shell material studied from across the Swiss Plateau. Palaeomagnetic data shows a change from reversed to normal polarity within the upper part of the HF. When combined, the small mammal and molluscan remains, palaeomagnetic measurements, AA geochronology and sedimentary data, suggest an age of 2.1–1.8 Ma for the HF. Recently produced cosmogenic dates bracket the age of the HDS gravels beneath the HF to depositional periods between 2.6 and 0.9 Ma, with the youngest ages being in disagreement with our findings. The abundance and diversity of the molluscs from the Irchel Plateau, with several rare extinct species, together with a notable small mammal assemblage, make this a key palaeontological site and an important reference point for European Quaternary biostratigraphy.