Nonpolar Phase Research Articles

Nearly Barrierless Polarization Switching Mechanisms in ZrO2 Having Perpendicular In-Plane Domain Walls.

The polarization switching mechanism in ferroelectric ZrO2 involves the nucleation and subsequent migration of nonpolar domain boundaries; however, the fundamental mechanism driving this process remains inadequately understood. The present study introduces a mechanism for nearly barrierless polarization switching in 180° domain walls, facilitated by a the half-unit-cell nonpolar phase between oppositely polarized domains. Based on density functional theory (DFT) calculations, two types of 180° domain walls are explored, featuring head-to-head and tail-to-tail polarization boundaries, with nonpolar orthorhombic Pbcm and tetragonal P42/nmc phases as the respective domain walls. The calculations reveal exceptionally low energy barriers of 17.5 and 10.1 meV for migrating these Pbcm and P42/nmc boundaries by half a unit cell through the domains. An evaluation of the impact of defects on domain wall motion is achieved by introducing 2% oxygen vacancies or 3% Si doping, which induces a significant increase in the barrier motion activation energy, suggesting that defects serve as barriers to polarization switching.

Retention Mechanisms of Basic Compounds in Liquid Chromatography with Sodium Dodecyl Sulfate and 1-Hexyl-3-Methylimidazolium Chloride as Mobile Phase Reagents in Two C18 Columns

Reversed-phase liquid chromatography (RPLC) relies on a non-polar stationary phase and a more polar hydro-organic mobile phase, where compound retention is primarily governed by hydrophobicity, with more hydrophobic compounds being retained longer. The introduction of secondary equilibria in the chromatographic system through additives, such as anionic surfactants and ionic liquids (ILs), was proposed to mitigate ionic interactions between positively charged analytes and the anionic free silanol groups in non-endcapped stationary phases, thereby preventing increased retention and peak tailing. Additionally, the combined hydrophobic and ionic interactions between cationic analytes and the ions in these additives was demonstrated to create mixed retention mechanisms that influence retention and selectivity. In this regard, this study investigates aqueous chromatographic systems incorporating both the anionic surfactant sodium dodecyl sulfate (SDS) and the IL 1-hexyl-3-methylimidazolium chloride as mobile phase reagents. This combination of reagents modulates the retention, eliminating the need for organic solvents and resulting in highly sustainable HPLC procedures. The chromatographic behavior was assessed using two different C18 columns (Zorbax Eclipse and XTerra-MS). The strength of solute interactions was estimated by calculating equilibrium parameters and the contributions of hydrophobic and ionic interactions through simple mathematical models. Focusing on the retention of six basic drugs (β-adrenoceptor antagonists), the study highlighted the significant role of ionic interactions. The results demonstrate the feasibility of using aqueous systems combining SDS and an IL for the efficient separation of moderately polar basic compounds without the use of organic solvents.

Two-dimensional Fullerene-Based Ferroelectric Materials: Assembly and Effects on Charge Carrier Lifetime.

Manipulating the symmetry of fullerene-based low-dimensional materials is crucial to the development of electronic devices and modern nonvolatile memories. However, there have been few reports on studying the physicochemical properties of fullerene and its derivatives by controlling the symmetries. Herein, we demonstrate ferroelectricity in Sc3N@Ih-C80-Pd/Pt adducts with relatively strong spontaneous polarization. Polarization originates from subtle molecular interactions between Sc3N@Ih-C80 and Pd/Pt atoms, breaking the structural symmetry. Additionally, we investigate how a temperature-dependent polar-nonpolar phase transition affects the corresponding nonadiabatic electron-hole recombination process in the ferroelectric fullerene adduct Sc3N@Ih-C80-Pd. The results indicate that polarization has a greater impact than temperature effects, resulting in an extension of the carrier lifetime in the polar phase by over 3 times compared to that in the nonpolar phase. Our findings unveil new members of the ferroelectric fullerene family and provide guidance for improving the performance of optoelectronic materials.

Tuning ferroelectric domains and polarization properties of flexible BiFeO3 thin films by phase transition engineering

In the present investigation, thin films of flexible (Bi1-xSmx)(Fe0.95Mn0.05)O3 (denoted as BSFM0, BSFM4, BSFM8, and BSFM12 for x=0 %, 4 %, 8 %, and 12 %, respectively) were synthesized on metallic Ni-Cr substrates via the sol-gel technique. A comprehensive examination was conducted to elucidate the influence of varying concentrations of Sm3+ substitution on the phase constitution, oxygen vacancy concentration, and leakage behavior of the (Bi1-xSmx)(Fe0.95Mn0.05)O3 films. Utilizing X-ray diffraction (XRD) and Raman spectrometry, it was ascertained that all films exhibited a composite structure comprising orthorhombic (Pnma) and rhombohedral (R3c) phases. An augmentation in Sm3+ doping led to a non-monotonic variation in the R3c phase content, initially increasing and subsequently decreasing, while the nonpolar Pnma phase demonstrated a progressive enhancement. The distorted R3c phase was found to promote the flipping of the domain architecture, thereby augmenting the polarization attributes. Notably, at a Sm doping level of 4 %, the maximum polarization (Pmax) attained was 95 μC/cm2, with a remnant polarization (Pr) of 78 μC/cm2. The incorporation of a judicious amount of Sm was observed to curtail film leakage and decelerate the aging phenomenon. The compositional stability of this doping level was evaluated across a frequency spectrum of 0.1–12 kHz and a temperature gradient of 25–200 °C, revealing no propensity for degradation under conditions of polarization, a holding duration of 104 s, or fatigue scenarios involving a curvature of 5 mm and 108 switching cycles subjected to 103 instances of bending. These findings provide innovative insights for the development of next-generation lead-free transducer apparatus and flexible information storage mediums.

Critical evaluation of the NIST retention index database reliability with specific examples.

The NIST gas chromatographic retention index database is widely used in gas chromatography-mass spectrometry analysis. For many compounds, the NIST database contains many entries that are presumably obtained independently of each other. We showed with specific examples that there are cases in the NIST database where several entries exist for the same compound, and all of them are equally erroneous (an error of more than 100 units). In particular, we demonstrated that all retention index values for such an important compound as imidazole for non-polar stationary phases in theNISTdatabase are erroneous. In addition to imidazole, a similar situation is observed for four more nitrogen-containing heterocyclic compounds. For certainty, measurements were performed under several conditions, using various temperature programs, and using two specimens of columns. The structures were confirmed using nuclear magnetic resonance and mass spectrometry. It was shown with specific examples that many values are not reliable: either data were obtained using standard samples of undescribed origin without confirmation (without even using mass spectrometry) or, in some cases, standard samples were not used at all, and the retention index was obtained for a mixture component identified using a mass spectral library search. Some "independent" values are not such but are repeated publications of the same data (secondary sources), or simply several values taken from the same source. In the work, an analysis was carried out and assumptions were made about how several equally incorrect retention index values could appear in the NIST database.

Crystal Structures and Piezoelectric Properties of Quenched and Slowly-Cooled BiFeO3-BaTiO3 Ceramics.

The BiFeO3-BaTiO3 (BF-BT) ceramics were here prepared through the solid-state reaction of Bi2O3, Fe2O3 and nano-sized BT powders. The crystal structures and piezoelectric properties were investigated in both quenched (AQ) and slowly cooled (SC) 0.7BF-0.3BT ceramics. Prior work has shown that rhombohedral and pseudo-cubic phases coexist in 0.7BF-0.3BT ceramics. In this work, the crystal structure of the pseudo-cubic phase was refined as a non-polar orthorhombic Pbnm phase in the SC sample and as a polar orthorhombic Pmc21 phase in the AQ sample. In addition to a sharp dielectric peak at about 620 °C, corresponding to the Curie temperature of the rhombohedral phase, a broad dielectric peak with strong frequency dispersion and a sharp frequency-independent dielectric peak were observed at around 500 °C in the SC and AQ samples, respectively. We determine that the dielectric anomalies around 500 °C were caused by a relaxor phase transition of the non-polar orthorhombic phase in the SC sample and a ferroelectric-paraelectric phase transition of the polar orthorhombic phase in the AQ sample. The AQ sample showed better ferroelectric and piezoelectric properties than the SC sample. The 0.7BF-0.3BT ceramic slowly cooled in a nitrogen atmosphere showed a well-saturated P-E curve and a similar temperature-dependent dielectric constant as the AQ sample. Our results indicate that large concentrations of oxygen vacancies produce a more distorted polar orthorhombic phase and better piezoelectric properties in the AQ sample than in the SC sample.

Origin of the ultrahigh field-induced strain in the Gd-doped 0.854Bi0.5Na0.5TiO3-0.12Bi0.5K0.5TiO3-0.026BaTiO3 ternary ceramic system

This study focused on analyzing the ferroelectric, piezoelectric, and dielectric properties of lead-free Bi0.487Na0.427K0.06Ba0.026TiO3 (0.854BNT-0.12BKT-0.026BT) ternary ceramic system by systematically doping 0.001, 0.01, 0.1, 0.5, and 1.0 mol% Gd2O3. The specific composition that was investigated is located at the tetragonal side of the rhombohedral-tetragonal morphotropic phase boundary (MPB) region. Undoped and Gd-doped BNT-BKT-BT ceramics were produced by the conventional solid-state reaction method. Ferroelectric, piezoelectric, and dielectric properties of ceramics were analyzed by carrying out electrical measurements from sintered samples. An ultrahigh field-induced unipolar strain of 0.52% at 65 kV cm−1, with a converse piezoelectric coefficient d33* of up to 795 pm V−1, was achieved with 0.5 mol% Gd doping. This was attributed to the Gd dopant disrupting the normal ferroelectric order and leading to the formation of a nonpolar relaxor phase. The field-induced transition from the nonpolar relaxor phase to the normal ferroelectric phase resulted in relatively large field-induced strain values in the 0.5 mol% Gd-doped ceramics. These results suggest that Gd-doped BNT-BKT-BT ceramics hold promise for digital actuator applications.

Temperature-induced hexagonal–orthorhombic phase transition in lutetium ferrite nanoparticles

The x-ray diffraction, Raman, and infrared spectroscopies and magnetic measurements were used to explore the correlated changes of the structure, lattice dynamics, and magnetic properties of the LuFeO3 nanoparticles, which appear in dependence on their sintering temperature. We revealed a gradual substitution of the hexagonal phase by the orthorhombic phase in the nanoparticles, with sintering temperature increasing from 700 to 1100 °C. The origin and stability of the hexagonal phase in the LuFeO3 nanoparticles are of the special interest, because the nanoparticles in the phase can be a room-temperature multiferroic with a weak ferromagnetic and pronounced structural and ferroelectric long-range ordering. The antiferromagnetic and nonpolar orthorhombic phase is more stable in the bulk LuFeO3. To define the ranges of the hexagonal phase stability, we determine the bulk and interface energy densities of different phases from the comparison of the Gibbs model with experimental results. Using effective parameters of the Gibbs model, we predict the influence of size effects and temperature on the structural and polar properties of the LuFeO3 nanoparticles. Analysis of the obtained results shows that the combination of the x-ray diffraction, Raman and infrared spectroscopies, magnetic measurements, and theoretical modeling of structural and polar properties allows us to establish the interplay between the phase composition, lattice dynamics, and multiferroic properties of the LuFeO3 nanoparticles prepared under different conditions.

Investigating micelle formation in systems with benzethonium chloride and n-lauroyl sarcosine sodium salt: The impact of thermal effects and ethyl lactate concentration using volumetric, statistical, acoustic, and molecular dynamic methods

Surface active agents (SAAs) are versatile molecules that possess the ability to serve as multifunctional ingredients in a wide range of consumer products across various industrial sectors. These molecules can act as wetting and dispersion agents, emulsifiers, foaming and anti-foaming agents, lubricants, and more. The objective of this study was to evaluate the effect of temperature, and ethyl lactate concentration on micelle formation in systems containing benzethonium chloride (BC) and N-lauroyl sarcosine sodium salt (NLSS). The experimental measurements were conducted at three equidistant temperatures i.e., 298.15 K to 318.15 K and pressure, P=0.1 MPa. Several volumetric as well as compressibility parameters including apparent molar properties (Vϕ,Kϕ,S), partial molar properties (Vϕ°,Kϕ,S°), transport properties (ΔtrVϕ°,ΔtrKϕ,S°), hydration number, etc. have been evaluated. A Bayesian two-factor design with uninformative priors was used to analyze the values of Vϕ°,and Kϕ,S°. It was possible to determine that the temperature factors, and the ethyl lactate (EL) addition significantly influence the results for Vϕ° while for Kϕ,S°it is not appreciable at 5 and 10 % in EL concentration when BC and NLSS systems is compared. The simulations of the micellization process show the impact of temperature, particularly in the presence of ethyl lactate, is evident in the structural and dynamic changes observed in the micelles. Specifically, as the temperature rises from 298.15 K to 318.15 K, the self-assembly process becomes more spontaneous and accelerated, leading to larger and more spherical micelles. These alterations in micelle size, shape, and orientation enhance their capacity to effectively solubilize hydrophobic substances. The computational simulations demonstrated that BC molecules exhibit spontaneous aggregation at the interface of polar-nonpolar systems, resulting in the formation of a monolayer. In this monolayer, the heads of the molecules are oriented towards the polar phase, while the hydrophobic tails are in the nonpolar phase. Similarly, the NLSS system exhibits a continuous and gradual process of self-organization over a period of 120 ns, where NLSS molecules naturally come together to create a single layer arrangement at the zigzag-shaped boundary.

Facile Coordination Transitions in AgCrX2 (X = S, Se): Unprecedented Electrostrain, Negative Piezoelectricity and Thermal Expansion.

The coefficients of piezoelectricity and thermal expansion are generally positive due to the bond anharmonicity. For converse piezoelectricity, the electrostrain obtained in prevalent ceramics is only around 1%. Here we propose that the coordination transition of metal cations may make a paradigm shift. Through first-principles calculations, we predict a series of low-energy phases with distinct coordinations for Ag ions in superionic conductor AgCrX2 (X = S, Se), including ferroelectric and nonpolar phases with distinct interlayer distances. The mobile feature of Ag ions, which can be attributed to its complex coordination chemistry, can facilitate transformation between various coordination phases. Such facile transitions with ultralow barriers can be driven by applying either pressure, an electric field, or a change in temperature, giving rise to various exotic effects, including electrostrain, negative piezoelectricity, and negative thermal expansion. All with unprecedented giant constants, those mechanisms stem from the coordination transitions, distinct from the weak linear effects in previous reports.

Fuel property modeling by high-speed gas chromatography coupled with partial least squares data analysis

Partial least squares (PLS) regression is a valuable chemometric tool for property prediction when coupled with gas chromatography (GC). Since the separation run time and stationary phase selection are crucial for effective PLS modeling, we study these GC parameters on the prediction of viscosity, density and hydrogen content for 50 aerospace fuels. Due to the diversity of compounds in the fuels (primarily alkanes, cycloalkanes, and aromatics), we explore both polar and non-polar stationary phase columns. The robustness for the PLS models was evaluated by their normalized root mean square error of cross-validation (NRMSECV). PLS models built for viscosity across 1-min, 3-min, 7-min, and 10-min time window (TW) high-speed GC separations produced nearly the same NRMSECV with the polar column data with an average (standard deviation) of 4.41 % (0.34 %) versus the non-polar column data of 4.69 % (0.15 %). In contrast, while the NRMSECV of density modeling with the polar column data varied more than the viscosity models, averaging 7.54 % (0.67 %), the non-polar column data produced a significantly higher average NRMSECV of 10.06 % (0.35 %). Similarly, for hydrogen content, the NRMSECV with the polar column data averaged 9.50 % (0.87 %), which was significantly lower than the NRMSECV with the non-polar column data averaging 12.10 % (0.88 %). We also investigated the impact of smoothing the GC data on the corresponding PLS models. By applying varying degrees of smoothing, we can effectively obtain similar chromatographic peak patterns in a shorter TW. For example, a 10-min smoothed chromatogram appears like the 1-min separation with no smoothing but resulted in nearly the same NRMSECV. Overall, the fast separation with a 1-min TW produced robust PLS models for viscosity with either stationary phase column, whereas for density and hydrogen content the polar stationary phase column produced superior PLS models, thus with proper stationary phase selection, a fast separation run time could be readily applied with optimal PLS property modeling results.

Formation of Micelles by Nonionic Detergent Molecules Leads to the Breakthrough Peak in Reversed-Phase Ultraperformance Liquid Chromatography (UPLC).

A peculiar phenomenon known as "breakthrough" occurs under reversed-phase ultraperformance liquid chromatography (UPLC) conditions and has been under scrutiny for decades. This effect takes place when a large volume of analyte solution, prepared in a solvent with an eluotropic strength significantly higher than that of the initial mobile phase solvent, is injected. According to the literature, under specific experimental conditions, a substantial portion of solutes is carried by the mobile phase and detected near the dead time of the chromatographic system. This phenomenon is typically observed when the injected volume of a particular analyte is sufficiently large. However, the underlying physicochemical principles governing this phenomenon have remained elusive. We present evidence demonstrating that breakthroughs can occur even when injecting a sample of a neat solvent devoid of any solute. By mass spectrometric analysis, we identified the breakthrough peak to represent the nonionic detergent Triton. When columns are equilibrated with water, Triton molecules, present as impurities in filtered water, accumulate on the nonpolar stationary phase. Upon the introduction of a solvent with a stronger elution strength, Triton molecules retained on the stationary phase are removed. As detergents, these Triton molecules aggregate into micelles featuring a hydrophobic inner core and a hydrophilic outer shell. These hydrophilic micelles are carried by the polar mobile phase and detected as the breakthrough peak at the dead time of the chromatographic system. When analytes are present, a portion of the injected solutes is captured by the micelles and transported with the breakthrough plug. This assertion was verified and confirmed by liquid chromatography-mass spectrometry (LC-MS) analysis of a methanolic solution of perfluorooctanoic acid (PFOA). The mass spectra corresponding to the breakthrough plug featured a peak for the PFOA anion (m/z 413) in addition to those for Triton.

First-principles predictions of HfO2-based ferroelectric superlattices

The metastable nature of the ferroelectric phase of HfO2 is a significant impediment to its industrial application as a functional ferroelectric material. In fact, no polar phases exist in the bulk phase diagram of HfO2, which shows a dominant non-polar monoclinic ground state. As a consequence, ferroelectric orthorhombic HfO2 is stabilized either kinetically or via epitaxial strain. Here, we propose an alternative approach, demonstrating the feasibility of thermodynamically stabilizing polar HfO2 in superlattices with other simple oxides. Using the composition and stacking direction of the superlattice as design parameters, we obtain heterostructures that can be fully polar, fully antipolar or mixed, with improved thermodynamic stability compared to the orthorhombic polar HfO2 in bulk form. Our results suggest that combining HfO2 with an oxide that does not have a monoclinic ground state generally drives the superlattice away from this non-polar phase, favoring the stability of the ferroelectric structures that minimize the elastic and electrostatic penalties. As such, these diverse and tunable superlattices hold promise for various applications in thin-film ferroelectric devices

A new leaf essential oil from the Andean species Gynoxys szyszylowiczii Hieron. of southern Ecuador: chemical and enantioselective analyses

The essential oil obtained from the dry leaves of Gynoxys szyszylowiczii Hieron. was described in this study for the first time. The chemical analysis, conducted on two stationary phases of different polarity, permitted to identify sixty-four compounds, that were quantified with at least one column. The main components, on a non-polar and polar stationary phase respectively, were germacrene D (21.6–19.2%), α-pinene (4.4–4.9%), n-tricosane (4.3% on both columns), (E)-β-caryophyllene (3.3–4.3%), 1-docosene (3.2–2.8%), α-cadinol (2.8–3.1%), and cis-β-guaiene (2.6–3.0%). This investigation was complemented by the enantioselective analysis of some major chiral compounds, carried out on two chiral selectors based on β-cyclodextrines. As a result, (S)-( +)-α-phellandrene, (S)-( +)-β-phellandrene, and (1S,2R,6R,7R,8R)-( +)-α-copaene appeared enantiomerically pure, whereas α-pinene, β-pinene, terpinen-4-ol, and germacrene D were detected as scalemic mixtures. Finally, linalool was practically racemic. The distillation yield, analytically calculated by weight of dry plant material, was 0.03%.

The role of the cation and anion in aqueous liquid chromatography with sodium dodecyl sulphate and imidazolium-based ionic liquids as mobile phase reagents

BackgroundIn reversed-phase liquid chromatography, solute retention is primarily influenced by interactions between a nonpolar stationary phase and a moderately polar hydro-organic mobile phase, based on the solute lipophilicity. However, challenges regarding retention and peak tailing can arise due to ionic interactions between positively charged analytes and free silanols present on silica-based stationary phases. To address these challenges, incorporating surfactants and ionic liquids (ILs) into the mobile phase offers an effective solution. These additives synergistically enhance chromatographic performance through electrostatic and lipophilic interactions, which enable fine-tuning of selectivity and improved separation efficiency. ResultsThis study explores the chromatographic behaviour of several basic compounds in aqueous mixtures containing the anionic surfactant sodium dodecyl sulphate (SDS), above its critical micellar concentration, combined with various 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) featuring chloride, tetrafluoroborate, and hexafluorophosphate anions, all without the addition of organic solvents. Specifically, this research investigates the influence of different anion types within the ILs and considers the impact of the IL cations. Analysis of solute peak profiles reveals narrow and symmetrical peaks. By introducing tetrafluoroborate and hexafluorophosphate IL anions into a mobile phase that contains an anionic surfactant, the study sheds light on the interactions occurring within the chromatographic column. This enhanced understanding of the combined effects of surfactants and ILs contributes to refining chromatographic methodologies. SignificanceThis research highlights the importance of carefully selecting the appropriate IL when incorporating it into a micellar mobile phase alongside SDS. This combination results in practical retention times that surpass the performance achieved with either the surfactant or IL alone in the mobile phase. The study particularly emphasises the impact of the IL anion, especially in the absence of SDS and organic solvents. This unveils interactions that are otherwise obscured in micellar and hydro-organic media, providing new insights into chromatographic dynamics.

Effect of A-site excess on the shape memory effect of sodium bismuth titanate ceramics

The impact of A-site excess on the shape memory effect of Na0.5Bi0.5TiO3 ceramics was investigated. We found that the recoverable plastic-like strain was increased by more than 10 % by A-site excess. The enhancement is attributed to the change in crystal structure from a rhombohedral phase to a monoclinic one, which further changes the phase transition behavior between the ferroelectric and nonpolar phases. Suppression of grain size and the generation of defects after the addition of excess Bi and Na were proposed for the appearance of monoclinic phase. This investigation proposes a viable approach to modulate the shape memory effect of Na0.5Bi0.5TiO3-based ceramics through the manipulation of the crystal structure and the associated phase transition processes, ultimately influencing the shape memory characteristics.

New Essential Oils from Ecuadorian Gynoxys cuicochensis Cuatrec. and Gynoxys sancti-antonii Cuatrec. Chemical Compositions and Enantioselective Analyses.

The present study belonged to an unfunded project, dealing on the systematic description of unprecedented essential oils (EOs), distilled from 12 species of genus Gynoxys Cuatrec. In this very case, the aim was the first chemical and enantiomeric analyses of two volatile fractions, obtained from the leaves of Gynoxys cuicochensis Cuatrec. and Gynoxys sancti-antonii Cuatrec. These EOs were analyzed by GC-MS (qualitatively) and GC-FID (quantitatively), detecting 89 and 60 components from G. cuicochensis and G. sancti-antonii, respectively. Major components for G. cuicochensis EO, on a nonpolar and polar stationary phase, were α-pinene (29.4-29.6%), p-vinylguaiacol (3.3-3.6%), and germacrene D (20.8-19.9%). In G. sancti-antonii EO, the main compounds were α-pinene (3.0-2.9%), β-pinene (12.9-12.1%), γ-curcumene (19.7-18.3%), germacrene D (9.0% on the polar phase), ar-curcumene (5.3% on the polar phase), δ-cadinene (4.1-4.6%), α-muurolol (3.3-2.4%), α-cadinol (3.0% on both columns), and an undetermined compound, of molecular weight 220. In addition to chemical composition, the enantioselective analysis of the main chiral compounds was carried out on two different chiral selectors. In G. cuicochensis EO, (1R,5R)-(+)-α-pinene, (S)-(+)-β-phellandrene, (R)-(-)-piperitone, and (S)-(-)-germacrene D were enantiomerically pure, whereas β-pinene, sabinene, α-phellandrene, limonene, linalool, and terpinen-4-ol were observed as scalemic mixtures. On the other hand, in G. sancti-antonii EO, the pure enantiomers were (1S,5S)-(-)-α-pinene, (1R,5R)-(+)-sabinene, (R)-(-)-β-phellandrene, (S)-(-)-limonene, (1S,2R,6R,7R,8R)-(+)-α-copaene, (R)-(-)-terpinen-4-ol, and (S)-(-)-germacrene D, whereas β-pinene, linalool, and α-terpineol were present as scalemic mixtures. The principal component analysis demonstrated that G. cuicochensis volatile fraction was quite similar to many of the other EOs of the same genus, whereas G. sancti-antonii produced the most dissimilar EO. Furthermore, the enantioselective analyses showed the usual variable enantiomeric distribution, with a greater presence of enantiomerically pure compounds in G. sancti-antonii EO.

An Emergent Quadruple Phase Ensemble in Doped Bismuth Ferrite Thin Films Through Site and Strain Engineering

AbstractIn ferroic materials, giant susceptibilities can be realized at artificially constructed phase boundaries through deterministic manipulation of the order parameter. Here, emergent ferroelectric structural phase evolution behavior is demonstrated through a synergistic combination of A‐site doping and strain engineering. Using chemical solution deposition derived (001)‐oriented Sm‐substituted bismuth ferrite (Bi1‐xSmxFeO3) films as a prototypical system, a morphotropic phase boundary comprising a coexistence of four distinct crystallographic phases is uncovered. These ferroelectric, polar, and nonpolar phases form a nanoscale mixture without the presence of crystallographically hard boundaries. The system thus possesses the ability to show both polarization rotation and extension, effectively releasing the polarization from its crystallographic constraint. Consequently, both robust ferroelectric properties and giant electromechanical responses are obtained. For instance, the optimized composition with x = 0.14 has a remnant polarization of 2Pr = 103 µC cm−2 and electromechanical response 175% that of undoped BFO. These findings showcase the tremendous potential of synthetic phase boundaries, particularly in the context of lead‐free functional multiferroics.

Nanoscale Phase and Orientation Mapping in Multiphase Polycrystalline Hafnium Zirconium Oxide Thin Films Using 4D-STEM and Automated Diffraction Indexing.

Ferroelectric hafnium zirconium oxide (HZO) holds promise for nextgeneration memory and transistors due to its superior scalability and seamless integration with complementary metal-oxide-semiconductor processing. A major challenge in developing this emerging ferroelectric material is the metastable nature of the non-centrosymmetric polar phase responsible for ferroelectricity, resulting in a coexistence of both polar and non-polar phases with uneven grain sizes and random orientations. Due to the structural similarity between the multiple phases and the nanoscale dimensions of the thin film devices, accurate measurement of phase-specific information remains challenging. Here, the application of 4D scanning transmission electron microscopy is demonstrated with automated electron diffraction pattern indexing to analyze multiphase polycrystalline HZO thin films, enabling the characterization of crystallographic phase and orientation across large working areas on the order of hundreds of nanometers. This approach offers a powerful characterization framework to produce a quantitative and statistically robust analysis of the intricate structure of HZO films by uncovering phase composition, polarization axis alignment, and unique phase distribution within the HZO film. This study introduces a novel approach for analyzing ferroelectric HZO, facilitating reliable characterization of process-structure-property relationships imperative to accelerating the growth optimization, performance, and successful implementation of ferroelectric HZO in devices.

Symmetry Engineering of Epitaxial Hf0.5Zr0.5O2 Ultrathin Films.

Robust ferroelectricity in HfO2-based ultrathin films has the potential to revolutionize nonvolatile memory applications in nanoscale electronic devices because of their compatibility with the existing Si technology. However, to fully exploit the potential of ferroelectric HfO2-based thin films, it is crucial to develop strategies for the controlled stabilization of various HfO2-based polymorphs in nanoscale heterostructures. This study demonstrates how substrate-orientation-induced anisotropic strain can engineer the crystal symmetry, structural domain morphology, and growth orientation of ultrathin Hf0.5Zr0.5O2 (HZO) films. Epitaxial ultrathin HZO films were grown on the heterostructures of (001)- and (110)-oriented La2/3Sr1/3MnO3/SrTiO3 (LSMO/STO) substrate. Various structural analyses revealed that the (110)-oriented substrate promotes a higher degree of structural order (crystallinity) with improved stability of the (111)-oriented orthorhombic phase (Pca21) of HZO. Conversely, the (001)-oriented substrate not only induces a distorted orthorhombic structure but also facilitates the partial stabilization of nonpolar phases. Electrical measurements revealed robust ferroelectric properties in epitaxial thin films without any wake-up effect, where the well-ordered crystal symmetry stabilized by STO(110) facilitated better ferroelectric characteristics. This study suggests that tuning the epitaxial growth of ferroelectric HZO through substrate orientation can improve the stability of the metastable ferroelectric orthorhombic phase and thereby offer a better understanding of device applications.