Nonlinear Inter-channel Crosstalk Research Articles

Design of low‐power all‐optical networks under the constraint of four‐wave mixing

SummaryIn this paper, we propose a static lightpath establishment method to design low‐power all‐optical networks under the constraint of four‐wave mixing (FWM). Since the FWM causes nonlinear interchannel crosstalk, it degrades the communication quality of optical signals. The FWM crosstalk effect becomes strong in a fiber as the number of passing optical signals increases. Therefore, we should reduce the number of optical signals passing through the same fiber from the perspective of the FWM. Meanwhile, in order to enhance the power efficiency of optical amplifiers, which are deployed at each optical fiber, it is preferred that multiple optical signals are transmitted in the same fiber. In order to decrease the power consumption while keeping high communication quality, the proposed method statically selects routes, wavelengths, and fibers for each traffic demand, considering the FWM crosstalk effect and the usage efficiency of the optical amplifiers. We show the performance of the proposed method through numerical experiments.

Dynamic lightpath establishment considering four-wave mixing in multifiber WDM networks

This paper proposes a dynamic lightpath establishment scheme considering four-wave mixing (FWM) in multifiber wavelength-division multiplexed (WDM) all-optical networks. The FWM is one of the most important physical impairments to be resolved in WDM networks because the FWM induces nonlinear inter-channel crosstalk and decays the performance of WDM networks. In WDM networks, data are transmitted via lightpaths. When the effect of FWM crosstalk is large, it is highly possible that data transmission fails even if lightpaths are correctly established. The proposed scheme aims to avoid not only the blocking of lightpath establishment but also the accumulation of FWM crosstalk by means of ingenious selection of routes, wavelengths, and fibers for lightpath establishment. In the proposed scheme, a route and a wavelength are selected for each lightpath based on wavelength availability and wavelength placement of established lightpaths. Furthermore, fibers on the route are selected based on estimated FWM power. In this paper, we show the effectiveness of the proposed scheme through simulation experiments.

WDM Signal All-Optical Precompensation of Kerr Nonlinearity in Dispersion-Managed Fibers

Compensation of the Kerr nonlinearity in dispersion-managed optical fiber links is demonstrated for 100-GHz-spaced wavelength division multiplexing (WDM) 40-Gb/s return-to-zero-differential phase-shift keying signals using all-optical nonlinear predistortion and phase-conjugation at the transmitter. Measurements of the bit-error rate (BER) reveal a Q2-factor improvement from 1.3 to 2.9 dB for transmission of one to four WDM channels in a standard single-mode fiber link. Although signal distortion is primarily from intrachannel nonlinearity, the BER is also degraded by linear and nonlinear interchannel crosstalk.

Simultaneous WDM signal detection realized by ultrafast field sampling

This paper proposes a novel detection technique for wavelength-division multiplexing (WDM) signals that uses the ultrafast field sampling approach. The proposed technique simultaneously samples the total field of the WDM signal with no wavelength-demultiplexing; its electrical post-processing provides a filtering function in the digital domain. As a result, the individual fields of the WDM channels, including mutual phase relationship, can be jointly reconstructed. As a preliminary demonstration, the simultaneous monitoring of a WDM signal composed of two channels with independent polarization states, is successfully performed using a dual-channel field sampling system with polarization diversity. This demonstration can be expanded to the detection of a WDM signal with N-channels by using an N-channel field sampling system. It is also experimentally-verified that the reconstructed fields preserve the mutual phase relationship of the original fields. This 'field sensitive' WDM detection may open new possibilities for advanced WDM monitoring systems and even the electrical compensation of linear and/or non-linear inter-channel cross-talk in digital coherent detection systems.

Performance of nonlinear interchannel crosstalk pre-compensation at zero-dispersion wavelength using carrier phase-locked WDM

The increase in WDM transmission distance at zero-dispersion wavelength made possible by pre-compensation to offset nonlinear interchannel crosstalk is studied. A simulation shows that pre-compensation allows higher fibre launched power and increases the transmission distance by 3.3 times for a 50 GHz-spaced 8-channel WDM system. Pre-compensation is shown to be limited by the undeterministic nonlinear distortion induced by the accumulated amplifier spontaneous emission noise from repeater amplifiers. Also, optical power tolerance of the pre-distorted waveform generated at the transmitter is studied.

Compensation of Interchannel Crosstalk Induced by Optical Fiber Nonlinearity in Carrier Phase-Locked WDM System

A scheme that compensates the waveform distortion induced by nonlinear interchannel crosstalk such as four-wave mixing (FWM) and cross-phase modulation as well as self-phase modulation in phase-locked wavelength-division-multiplexing transmission systems is proposed. Reduction of FWM-induced waveform distortion by controlling the phase relationship between neighbouring channels and its cancellation by precompensation is successfully demonstrated