Nonionic Amphiphilic Block Copolymers Research Articles

Dynamic tuning of the director field in liquid crystal shells using block copolymers

When an orientationally ordered system, like a nematic liquid crystal (LC), is confined on a self-closing spherical shell, topological constraints arise with intriguing consequences that depend critically on how the LC is aligned in the shell. We demonstrate reversible dynamic tuning of the alignment, and thereby the topology, of nematic LC shells stabilized by the nonionic amphiphilic block copolymer Pluronic F127. Deep in the nematic phase, the director (the average molecule orientation) is tangential to the interface, but upon approaching the temperature TNI of the nematic– isotropic transition, the director realigns to normal. We link this to a delicate interplay between an interfacial tension that is nearly independent of director orientation, and the configurationdependent elastic deformation energy of an LC confined in a shell. The process is primarily triggered by the heating-induced reduction of the nematic order parameter, hence realignment temperatures differ by several tens of degrees between LCs with high and low TNI , respectively. The temperature of realignment is always lower on the positive-curved shell outside than at the negative-curved inside, yielding a complex topological reconfiguration on heating. Complementing experimental investigations with mathematical modeling and computer simulations, we identify and investigate three different trajectories, distinguished by their configurations of topological defects in the initial tangential-aligned shell. Our results uncover a new aspect of the complex response of LCs to curved confinement, demonstrating that the order of the LC itself can influence the alignment and thereby the topology of the system. They also reveal the potential of amphiphilic block copolymer stabilizers for enabling continuous tunability of LC shell configuration, opening doors for in-depth studies of topological dynamics as well as novel applications in, e.g., sensing and programmed soft actuators.

DNA-Coated Functional Oil Droplets.

Many industrial soft materials include oil-in-water (O/W) emulsions at the core of their formulations. By using tuneable interface stabilizing agents, such emulsions can self-assemble into complex structures. DNA has been used for decades as a thermoresponsive, highly specific binding agent between hard and, recently, soft colloids. Up until now, emulsion droplets functionalized with DNA had relatively low coating densities and were expensive to scale up. Here, a general O/W DNA-coating method using functional nonionic amphiphilic block copolymers, both diblock and triblock, is presented. The hydrophilic poly(ethylene glycol) ends of the surfactants are functionalized with azides, allowing for efficient, dense, and controlled coupling of dibenzocyclooctane-functionalized DNA to the polymers through a strain-promoted alkyne-azide click reaction. The protocol is readily scalable due to the triblock's commercial availability. Different production methods (ultrasonication, microfluidics, and membrane emulsification) are used with different oils (hexadecane and silicone oil) to produce functional droplets in various size ranges (submicron, ∼20 and >50 μm), showcasing the generality of the protocol. Thermoreversible submicron emulsion gels, hierarchical "raspberry" droplets, and controlled droplet release from a flat DNA-coated surface are demonstrated. The emulsion stability and polydispersity is evaluated using dynamic light scattering and optical microscopy. The generality and simplicity of the method opens up new applications in soft matter, biotechnological research, and industrial advances.

Demonstration of a Novel Charge-Free Reverse Wormlike Micelle System.

We demonstrate a novel charge-free reverse wormlike micelle (RWLM) consisting of a ternary mixture of a nonionic amphiphilic block copolymer, fatty acid alkyl ester oil, and water under ambient conditions. Nonionic amphiphile tetra-[poly(oxyethylene)-poly(oxybutylene)]pentaerythrityl ether (TEBPE) self-assembled into spheroid-type micelles in nonaqueous media isopropyl myristate (IPM) with viscosity comparable to that of IPM. The addition of water increases viscosity only slightly up to a certain concentration of water and then drastically, demonstrating the sphere-to-wormlike micelle transition as confirmed by small-angle X-ray scattering. Further increase in water decreases the viscosity after attaining a maximum value. The zero shear viscosity (η0) of the 10 wt % TEBPE/IPM system reached the maximum at 2.6 wt % water and ca. 56 Pa·s, which is ∼fivefold higher than that of water. Dynamic rheological measurements on the highly viscous solutions confirmed the viscoelastic behavior and could be described by the Maxwell model. Conductivity, measured in the presence of a conductive probe, 1-ethyl-3-methylimidazolium tetrafluoroborate, was found to be higher for viscous samples compared to the nonviscous samples, suggesting the static percolation caused by the RWLM formation. Decrease in η0 and conductivity beyond a maximum suggests the shortening of reverse micelles. A similar behavior has been observed in other fatty acid alkyl ester oils of different alkyl chain lengths. Note that most of the RWLM systems previously reported are based on phosphatidylcholine (PC). Formulation and structure-properties related to non-PC-based RWLMs have been rarely explored. Non-PC-based RWLMs using chemically stable and low-cost synthetic molecules can be applied not only in pharmaceuticals and cosmetics but also in a wide range of applications including drag reduction agents for nonaqueous fluids and as a template for nanomaterial synthesis.

Lipid-PEG conjugates sterically stabilize and reduce the toxicity of phytantriol-based lyotropic liquid crystalline nanoparticles.

Lyotropic liquid crystalline nanoparticle dispersions are of interest as delivery vectors for biomedicine. Aqueous dispersions of liposomes, cubosomes, and hexosomes are commonly stabilized by nonionic amphiphilic block copolymers to prevent flocculation and phase separation. Pluronic stabilizers such as F127 are commonly used; however, there is increasing interest in using chemically reactive stabilizers for enhanced functionalization and specificity in therapeutic delivery applications. This study has explored the ability of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine conjugated with poly(ethylene glycol) (DSPE-PEGMW) (2000 Da ≤ MW ≤ 5000 Da) to engineer and stabilize phytantriol-based lyotropic liquid crystalline dispersions. The poly(ethylene glycol) (PEG) moiety provides a tunable handle to the headgroup hydrophilicity/hydrophobicity to allow access to a range of nanoarchitectures in these systems. Specifically, it was observed that increasing PEG molecular weight promotes greater interfacial curvature of the dispersions, with liposomes (Lα) present at lower PEG molecular weight (MW 2000 Da), and a propensity for cubosomes (QII(P) or QII(D) phase) at MW 3400 Da or 5000 Da. In comparison to Pluronic F127-stabilized cubosomes, those made using DSPE-PEG3400 or DSPE-PEG5000 had enlarged internal water channels. The toxicity of these cubosomes was assessed in vitro using A549 and CHO cell lines, with cubosomes prepared using DSPE-PEG5000 having reduced cytotoxicity relative to their Pluronic F127-stabilized analogues.

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from 1H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.

Synthesis of microcapsules via reactive surfactants

A statistical library of well-defined ionic and non-ionic amphiphilic block copolymers of P(MMA/HEMA)-b-PDMAEMA and PEG-b-P(MMA/HEMA) were synthesised via living radical polymerisation employing the macroinitiator technique. All the block copolymers show monomodal peaks and narrow weight distributions, indicating they were obtained in controlled manner. Those copolymers were further modified in order to prepare inisurfs and surfmers. This yielded a selection of active surfactants of desired molecular weight and low polydispersity. Soap-free miniemulsion polymerisations of butyl methacrylate were carried out using the obtained active surfactants to prepare core–shell microcapsules in which various concentrations of inert oil, hexadecane, as a model system were encapsulated. The influence of the block copolymer structure on the particle formation was studied. The core–shell nature of the particles could be confirmed using scanning electron microscopy. Up to 66% of hexadecane could be incorporated in PBMA microcapsules.

Pluronic Block Copolymer-Mediated Interactions of Organic Compounds with Noble Metal Nanoparticles for SERS Analysis

The composite silver and gold nanoparticles (AgNPs and AuNPs) coated with nonionic amphiphilic block copolymers (Pluronics L121, F68, or F127) are prepared by their adsorption under critical micelle concentrations. It is found that Pluronics bind to the surface of metal NPs as a very thin film by the hydrophobic association through poly(propylene oxide) block of the copolymers. The modification increases the colloidal stability of NPs with increasing hydrophilic-lipophilic balance of Pluronics in the order of L121, F127, and F68. In order to investigate the potentials of polymer coated noble metal NPs as surface-enhanced Raman spectroscopy (SERS) probes, fluorescent dyes and doxorubicin are used as model compounds. It is found that Pluronic component promotes the adsorption of these compounds on the composite NPs resulting in a considerable increase of Raman signal. This effect is attributed to increased concentration of the analyte molecules on the composite surface due to the hydrophobic and charge-charge interactions between the analytes and the Pluronic coat, and the stabilization of NPs by poly(ethylene oxide) blocks. The copolymer coated AgNPs show higher SERS activity than the counterparts prepared with AuNPs. Among the prepared composites, the AgNPs modified with Pluronic F127 containing extended poly(propylene oxide) and poly(ethylene oxide) blocks exhibit maximal Raman activity using rhodamine 6G (Rh6G) with a EF of 9.04 x 10(6). The results show that the developed Pluronic-based SERS probes can be used for sensitive and selective analysis of organic analytes.

Novel non-ionic block copolymers tailored for interactions with phospholipids

The bulk of literature on phospholipid membrane interactions with non-ionic amphiphilic block copolymers deals with ABA triblock copolymers of poly(ethylene oxide)- b-poly(propylene oxide)- b-poly(ethylene oxide). This is partially the result of their commercial availability. In recent years novel block copolymers have been synthesized and their interactions with phospholipids structured as Langmuir monolayers, liposomes, bilayer lipid membranes, tethered bilayers, and living cells have been studied. This review describes some new block copolymers with potential to interact with phospholipids. There is a tremendous progress in synthesis of amphiphilic block copolymers triggered by new controlled polymerization techniques as atom transfer radical polymerization or nitroxide mediated polymerization and by the possibility to ‘click’ preformed blocks together using quantitative reactions of functional endgroups. A special focus is given to novel water soluble amphiphilic triblock copolymers of poly(glycerol monomethacrylate)- b-poly(propylene oxide)- b-poly(glycerol monomethacrylate) and their interactions with phosphatidylcholine lipids. Also block copolymers containing hydrophobic blocks with perfluoroalkyl groups are discussed since they are special in a sense that their fluorophilic blocks are neither hydrophilic nor oleophilic as this is the case for conventional amphiphilic block copolymers. Experimental methods to study block copolymer–phospholipid interactions are summarized and selected results based on special experimental techniques such as isothermal titration calorimetry, infrared reflection absorption spectroscopy and ion conductance are presented. This work is intended to convey a better quantitative understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy.

Synthesis and Photocatalytic Properties of Mesoporous TiO2/ZnO Films with Improved Hydrophilicity

Optically transparent, hydrophilic, porous titania and Zn-doped titania thin films were prepared by the sol–gel technique, using the non-ionic amphiphilic block copolymer Pluronic P123 as the template. The structure and optical properties of these films were characterized using SEM, XRD, UV–vis spectroscopy and BET surface area determinations. It was found that the addition of zinc to TiO2 increased its surface acidity and hydrophilicity, and hence the catalytic activity of mesoporous TiO2/ZnO (1–10 atom %) films in the decomposition of the xantene dye, Rhodamine B.

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.

Nonionic Amphiphilic Block Copolymers Promote Gene Transfer to the Lung

Various pulmonary disorders, including cystic fibrosis, are potentially amenable to a treatment modality in which a therapeutic gene is directly delivered to the lung. Current gene delivery systems, either viral or nonviral, need further improvement in terms of efficiency and safety. We reported that nonionic amphiphilic block copolymers hold promise as nonviral gene delivery systems for transfection of muscular tissues. To evaluate the efficiency of these vectors in the lung, intratracheal instillation or aerosolization of reporter genes complexed with Lutrol or PE6400 was performed. Lutrol-DNA and, to a lesser extent, PE6400-DNA complexes promoted efficient gene transfection into mouse airways in a dose-dependent manner. This improvement over naked DNA was observed irrespective of the reporter gene. Lutrol enabled us to deliver significantly higher DNA amounts than current nonviral vectors, with even greater increases in gene expression and without the formation of colloidally unstable complexes. Time course studies showed that Lutrol-DNA complexes permitted prolonged gene expression for up to 5 days whereas with poly(ethylenimine) (PEI)-DNA polyplexes, expression peaked on days 1-2 postinstillation, was strongly reduced by day 5, and reached background levels on day 7. Aerosolized delivery of Lutrol-DNA complexes, a less invasive approach to deliver genes to the lung, gave 5- to 15-fold higher reporter gene expression compared with PEI-DNA polyplexes administered via the same delivery route. After intratracheal instillation of Lutrol-DNA complexes, histochemical staining for beta-galactosidase expression showed the presence of large blue areas. Histopathological analysis showed that Lutrol alone did not elicit inflammation, and that the inflammatory response after intratracheal instillation of Lutrol-DNA complexes was reversible and was observed only with the highest amounts of DNA. We also found that Lutrol can efficiently deliver genes to the airways of cystic fibrosis mice. Thus, we conclude that Lutrol is a highly promising vector for gene delivery to the lung.

Nonionic Amphiphilic Block Copolymers Promote Gene Transfer to the Lung

Nonionic Amphiphilic Block Copolymers Promote Gene Transfer to the Lung

Polyethyleneimine grafted with pluronic P85 enhances Ku86 antisense delivery and the ionizing radiation treatment efficacy in vivo

In an effort to improve the efficacy of antisense delivery, we evaluated polyethyleneimine (PEI, 2 kDa) alone or grafted with nonionic amphiphilic block copolymer Pluronic (P85) as a carrier for Ku86 antisense oligonucleotide (ASO) delivery. Ku86 is an abundant nuclear protein that plays an important role in nonhomologous DNA end joining and has implications in tumorigenesis and acquired drug resistance. Transfection of adherent and suspension cell lines with Ku86 ASOs complexed with P85-g-PEI (2 kDa) conjugates was associated with a specific decrease in Ku86 mRNA levels (EC50<75 nM and EC50<250 nM, respectively, n=3). More importantly, no requirement for reduced serum conditions was necessary during transfection. In contrast, whereas Ku86 ASOs complexed with PEI (2 kDa) alone were effective in decreasing Ku86 mRNA levels in adherent cell lines (EC50<75 nM, n=3), the formulation did not produce any detectable decrease in Ku86 mRNA levels in suspension cell lines. Transfection of adherent cell lines with 500 nM Ku86 ASOs formulated with P85-g-PEI (2 kDa) was associated with a specific decrease (<10% remaining of control) in Ku86 protein expression and a two-fold increased cell death after treatment with ionizing radiation (IR). In athymic nude mice bearing subcutaneous human HT29 colon adenocarcinoma xenografts, Ku86 ASO-P85-g-PEI (2 kDa) administration (15 mg/kg, subcutaneously) with a Q1D x 7 treatment schedule, when combined with a single dose of IR (6 Gy), caused a significant inhibition of HT29 tumor growth compared with mismatch- and naked antisense-pretreated control groups (time from 200 to 1000 mm3, 126.9 versus 84.18 and 87.76 days, P<0.005). A potentiation of the antitumor activity was observed in all mice treated with Ku86 ASO-P85-g-PEI (2 kDa) formulation; however, tumor growth inhibition was reversible upon treatment cessation. No morbidity/mortality or changes in histopathology were observed under this treatment regiment. Our results indicate that P85-g-PEI (2 kDa) conjugates may increase the efficacy of Ku86 ASO delivery in management of resistant malignancies, thus providing a rationale for their evaluation in cancer patients in combination with conventional anticancer therapies.

Altered Organ Accumulation of Oligonucleotides Using Polyethyleneimine Grafted With Poly(ethylene Oxide) or Pluronic as Carriers

Passive targeting provides a simple strategy based on natural properties of the carriers to deliver DNA molecules to desired compartments. Polyethylenimine (PEI) is a potent non-viral system that has been known to deliver efficiently both plasmids and oligonucleotides (ODNs) in vitro. However, in vivo systemic administration of DNA/PEI complexes has encountered significant difficulties because these complexes are toxic and have low biodistribution in target tissues. This study evaluates PEI grafted with poly(ethylene oxide) (PEO(8K)- g -PEI(2K)) and PEI grafted with non-ionic amphiphilic block copolymer, Pluronic ® P85 (P85- g -PEI(2K)) as carriers for systemic delivery of ODNs. Following i.v. injection an antisense ODN formulated with PEO(8K)- g -PEI(2K) accumulated mainly in kidneys, while the same ODN formulated with P85- g -PEI(2K) was found almost exclusively in the liver. Furthermore, in the case of the animals injected with the P85- g -PEI(2K)-based complexes most of the ODN was found in hepatocytes, while only a minor portion of ODN was found in the lymphocyte/monocyte populations. The results of this study suggest that formulating ODN with PEO(8K)- g -PEI(2K) and P85- g -PEI(2K) carriers allows targeting of the ODN to the liver or kidneys, respectively. The variation in the tissue distribution of ODN observed with the two carriers is probably due to the different hydrophilic-lipophilic balance of the polyether chains grafted to PEI in these molecules. Therefore, polyether-grafted PEI carriers provide a simple way to enhance ODN accumulation in a desired compartment without the need of a specific targeting moiety.

One-step synthesis of ordered mesocomposites with non-ionic amphiphilic block copolymers: implications of isoelectric point, hydrolysis rate and fluoride

Highly ordered hexagonal silica/block copolymer mesostructured composites have been prepared using syntheses with fluoride over a wide range of pH conditions (pH 0–9), by controlling the rates of hydrolysis and condensation of the tetramethoxysilane silica source.

Nanoporous silica from amphiphilic block copolymer (ABC) aggregates: control over correlation and architecture of cylindrical pores

Novel nonionic ABCs are shown to be versatile templates for the sol–gel synthesis of nanoporous silicas, the structure can be fine-tuned by varying the template concentration.