Noninvasive Imaging Of Biological Tissue Research Articles

Improving Multiphoton Microscopy by Combining Spherical Aberration Patterns and Variable Axicons

Multiphoton (MP) microscopy is a well-established method for the non-invasive imaging of biological tissues. However, its optical sectioning capabilities are reduced due to specimen-induced aberrations. Both the manipulation of spherical aberration (SA) and the use of axicons have been reported to be useful techniques to bypass this limitation. We propose the combination of SA patterns and variable axicons to further improve the quality of MP microscopy images. This approach provides enhanced images at different depth locations whose quality is better than those corresponding to the use of SA or axicons separately. Thus, the procedure proposed herein facilitates the visualization of details and increases the depth observable at high resolution.

A 3D reconstruction solution to ultrasound Joule heat density tomography based on acousto-electric effect: a simulation study

A 3D reconstruction solution to ultrasound Joule heat density tomography based on acousto-electric effect by deconvolution is proposed for noninvasive imaging of biological tissue. Compared with ultrasound current source density imaging, ultrasound Joule heat density tomography doesn't require any priori knowledge of conductivity distribution and lead fields, so it can gain better imaging result, more adaptive to environment and with wider application scope. For a general 3D volume conductor with broadly distributed current density field, in the AE equation the ultrasound pressure can't simply be separated from the 3D integration, so it is not a common modulation and basebanding (heterodyning) method is no longer suitable to separate Joule heat density from the AE signals. In the proposed method the measurement signal is viewed as the output of Joule heat density convolving with ultrasound wave. As a result, the internal 3D Joule heat density can be reconstructed by means of Wiener deconvolution. A series of computer simulations set for breast cancer imaging applications, with consideration of ultrasound beam diameter, noise level, conductivity contrast, position dependency and size of simulated tumors, have been conducted to evaluate the feasibility and performance of the proposed reconstruction method. The computer simulation results demonstrate that high spatial resolution 3D ultrasound Joule heat density imaging is feasible using the proposed method, and it has potential applications to breast cancer detection and imaging of other organs.

Shack-Hartmann wavefront sensing using interferometric focusing of light onto guide-stars

Optical microscopy provides noninvasive imaging of biological tissues at subcellular level. The optical aberrations induced by the inhomogeneous refractive index of biological samples limits the resolution and can decrease the penetration depth. To compensate refractive aberrations, adaptive optics with Shack-Hartmann wavefront sensing has been used in microscopes. Wavefront measurement requires light from a guide-star inside of the sample. The scattering effect limits the intensity of the guide-star, hence reducing the signal to noise ratio of the wavefront measurement. In this paper, we demonstrate the use of interferometric focusing of excitation light onto a guide-star embedded deeply in tissue to increase its fluorescent intensity, thus overcoming the excitation signal loss caused by scattering. With interferometric focusing, we more than doubled the signal to noise ratio of the laser guide-star through scattering tissue as well as potentially extend the imaging depth through using AO microscopy.

A cost-efficient frequency-domain photoacoustic imaging system

Photoacoustic (PA) imaging techniques have recently attracted much attention and can be used for noninvasive imaging of biological tissues. Most PA imaging systems in research laboratories use the time domain method with expensive nanosecond pulsed lasers that are not affordable for most educational laboratories. Using an intensity modulated light source to excite PA signals is an alternative technique, known as the frequency domain method, with a much lower cost. In this paper, we describe a simple frequency domain PA system and demonstrate its imaging capability. The system provides opportunities not only to observe PA signals in tissue phantoms, but also to acquire hands-on skills in PA signal detection. It also provides opportunities to explore the underlying mechanisms of the PA effect.

Full‐field 3D photoacoustic imaging based on plane transducer array and spatial phase‐controlled algorithm

Photoacoustic imaging (PAI) used for noninvasive imaging of biological tissue has been reported in many literature. However, there are still some disadvantages in the novel technique, such as the poor efficiency of imaging. In the current PAI, multiple excitation of laser and multiple acquisition of signal are necessary for image reconstruction. In this case, laser pulses may injure biological tissue due to energy accumulation. To popularize PAI in clinical applications, it is necessary to develop a new imaging approach to increase the efficiency of PAI. A spatial phase-controlled algorithm is presented for full-field three-dimensional (3D) image reconstruction. By using the algorithm, photoabsorption sources at different depths can be reconstructed using just one set of data acquired in single laser shot. Unfocused plane transducer array and parallel data-acquisition (PDA) equipment are used for real-time photoacoustic (PA) signal detection and acquisition. The spatial resolution of the 3D PAI system was analyzed. Two graphite rods at various positions in a simulation model and two bifurcate vessels in the ear of rabbit were imaged. In addition, the motion trace of one particle flowing at constant velocity was captured dynamically. Experimental results showed that spatial phase-controlled algorithm based on plane transducer array and PDA system was capable of static and dynamic 3D PAI. Spatial phase-controlled algorithm is introduced for 3D image reconstruction. The PA signals are collected by plane transducer array and PDA system in single pulse excitation. The acquired volumetric data are sufficient for 3D image reconstruction. Therefore, tissue can avoid the long-term exposure to light source and it is safer than the current PAI for in vivo imaging. With an increase in the repetition rate of laser pulse and speed of image display, the imaging method will realize real-time 3D imaging, which will be significant in clinical detection and medical diagnosis.

Fourier-domain biophotoacoustic subsurface depth selective amplitude and phase imaging of turbid phantoms and biological tissue

A novel photothermoacoustic imaging modality utilizing a frequency-swept (chirped) intensity-modulated laser source and coherent frequency domain signal processing ("biophotoacoustics") was introduced for noninvasive imaging of biological tissues. The developed frequency-domain imaging system takes advantage of linear frequency modulation waveforms to relate depth of tissue chromophores to the frequency spectrum of the detected acoustic response and of a narrow signal detection bandwidth to improve signal-to-noise ratio (SNR). Application of frequency-domain photothermoacoustic (FD-PTA) imaging was demonstrated using turbid phantoms and ex-vivo specimens of chicken breast with embedded absorbing inclusions simulating tumors.