Waste printed circuit boards (WCBs) were debrominated under hydrothermal treatment, using potassium carbonate as an alkaline additive to improve debromination efficiency (DE). Two different high-pressure reactors were used: a 1-L stirred reactor, where the evolution of the DE was followed over time at a low CO32−/Br− ratio (1:25), and an elementary 0.1-L non-stirred reactor, used to find the optimal parameters and to simplify the hydrothermal debromination (HTD) process. Considering both reactors, experiments were conducted changing the temperature (200 °C, 225 °C, 250 °C, 275 °C), and also the CO32−/Br− anionic ratio (1:50, 1:25, 1:10, 1:5, 1:2.5, 1:1, 2:1, 4:1) and the solid/liquid ratio (1:10, 1:5, 1:2) in the case of the 0.1-L reactor. No metallic catalyst was required.A maximum DE of about 98.9 wt % was reached in the agitated vessel at 275 °C after 4 h, with an additive/bromine ratio of 1:25. Similar DE (99.6 wt %) was also achieved in the non-stirred reactor at only 225 °C and after 2 h, using an additive/bromine ratio of 4:1 and a solid/liquid ratio of only 1:2. Concerning the solid phase behaviour during debromination, only 5 % of the net calorific value (NCV) was lost after a complete HTD treatment of WCB.