Non-doped Organic Light-emitting Diodes Research Articles

C-H-activated Csp2-Csp3 diastereoselective gridization enables ultraviolet-emitting stereo-molecular nanohydrocarbons with mulitple H···H interactions

Gridization is an emerging molecular integration technology that enables the creation of multifunctional organic semiconductors through precise linkages. While Friedel-Crafts gridization of fluorenols is potent, direct linkage among fluorene molecules poses a challenge. Herein, we report an achiral Pd-PPh3-cataylized diastereoselective (>99:1 d.r.) gridization based on the C-H-activation of fluorene to give dimeric and trimeric windmill-type nanogrids (DWGs and TWGs). These non-conjugated stereo-nanogrids showcase intramolecular multiple H…H interactions with a low field shift to 8.51 ppm and circularly polarized luminescence with high luminescent dissymmetry factors (|gPL | = 0.012). Significantly, the nondoped organic light-emitting diodes (OLEDs) utilizing cis-trans-TWG1 emitter present an ultraviolet electroluminescent peak at ~386 nm (CIE: 0.17, 0.04) with a maximum external quantum efficiency of 4.17%, marking the highest record among nondoped ultraviolet OLEDs based on hydrocarbon compounds and the pioneering ultraviolet OLEDs based on macrocycles. These nanohydrocarbon offer potential nanoscafflolds for ultraviolet light-emitting optoelectronic applications.

Purely Organic Room-Temperature Phosphorescence Molecule for High-Performance Non-Doped Organic Light-Emitting Diodes.

Purely organic molecules with room-temperature phosphorescence (RTP) are potential luminescent materials with high exciton utilization for organic light-emitting diodes (OLEDs), but those exhibiting superb electroluminescence (EL) performances are rarely explored, mainly due to their long phosphorescence lifetimes. Herein, a robust purely organic RTP molecule, 3,6-bis(5-phenylindolo[3,2-a]carbazol-12(5H)-yl)-xanthen-9-one (3,2-PIC-XT), is developed. The neat film of 3,2-PIC-XT shows strong green RTP with a very short lifetime (2.9 μs) and a high photoluminescence quantum yield (72%), and behaviors balanced bipolar charge transport. The RTP nature of 3,2-PIC-XT is validated by steady-state and transient absorption and emission spectroscopies, and the working mechanism is deciphered by theoretical simulation. Non-doped multilayer OLEDs using thin neat films of 3,2-PIC-XT furnish an outstanding external quantum efficiency (EQE) of 24.91% with an extremely low roll-off (1.6%) at 1000 cd m‒2. High-performance non-doped top-emitting and tandem OLEDs are also achieved, providing remarkable EQEs of 24.53% and 42.50%, respectively. Delightfully, non-doped simplified OLEDs employing thick neat films of 3,2-PIC-XT are also realized, furnishing an excellent EQE of 17.79% and greatly enhanced operational lifetime. The temperature-dependent and transient EL spectroscopies demonstrate the electrophosphorescence attribute of 3,2-PIC-XT. These non-doped OLEDs are the best devices based on purely organic RTP materials reported so far.

Introducing Internal Host Component to Thermally Activated Delayed Fluorescence Emitter for Efficient NIR Nondoped Organic Light-Emitting Diodes.

Developing thermally activated delayed fluorescence (TADF) near-infrared (NIR) organic light-emitting diodes (OLEDs) based on nondoped emitting layers is intriguing yet challenging, limited by low exciton utilization and notorious concentration quenching. Herein, a facile strategy is proposed to address this issue by incorporating an internal host component onto a traditional donor (D)-acceptor (A)-type red TADF molecule. A proof-of-concept emitter with an internal host is accordingly developed as well as a control one without an internal host. In the case of their monomer states, both emitters exhibit similar emission spectra due to their identical D-A pairs. However, under nondoped conditions, significant improvement in exciton utilization and quenching-resistant features are observed for the molecule with the internal host. The corresponding nondoped OLED yielded a maximum external quantum efficiency of 2.4%, with NIR emission peaking at 765 nm, which was a nearly 10-fold improvement relative to the efficiency based on the control molecule without an internal host. To the best of our knowledge, this result is on par with those of state-of-the art nondoped NIR TADF OLEDs in a similar emission region. These results offer a feasible pathway for the design and development of high-efficiency NIR nondoped OLEDs.

New Phenanthro[9,10-d]oxazole-Based Fluorophores with Hybridized Local and Charge-Transfer Characteristics for Highly Efficient Blue Non-Doped OLEDs with Negligible Efficiency Roll-Off.

It is vital to develop highly efficient non-doped blue organic light-emitting diodes (OLEDs) with high color purity and low-efficiency roll-off for applications in display and lighting. Herein, two blue D-A fluorophores TPA-PO and TPA-DPO are designed and synthesized, in which phenanthro[9,10-d]oxazole (PO) acts as the acceptor and triphenylamine as the donor. TPA-PO and TPA-DPO display good thermal stability and efficient luminescence efficiency in neat film. Results based on photophysical property and theoretical calculation demonstrate that TPA-PO and TPA-DPO possess the hybridized local and charge-transfer (HLCT) feature, which can utilize the triplet exciton to achieve highly efficient electroluminance (EL). The non-doped OLEDs with TPA-PO/TPA-DPO as pure emissive layer show the uniform EL emission peak at 468 nm, corresponding to CIE coordinates of (0.168, 0.187) and (0.167, 0.167), respectively. The TPA-DPO-based non-doped OLEDs provide the maximum external quantum efficiency (EQE) of 7.99 % and high exciton utility efficiency of 48.4 %~72.6 %. Moreover, the TPA-DPO-based device exhibits low-efficiency roll-off, still maintaining the EQE of 6.03 % at the high luminance of 5000 cd m-2. Those findings state clearly that PO is a promising building block of blue fluorophore with a potential HLCT feature to be applied in non-doped OLEDs.

Highly efficient non-doped organic light emitting diodes based on phenanthreneimidazole derivatives with hot exciton mechanism

Organic light-emitting diodes (OLEDs) promise many advantages for next-generation illumination and future display applications. Developing organic metal-free fluorescent emitter with wide bandgap and high efficiency is both significant and challenging in OLEDs. Here, phenanthroimidazole (PI) unit possessing ultraviolet emission is connected with biphenyl, diphenylmethane and diphenyl ether moieties to construct a series of blue luminogens of PPIDPh, PPIDPhC and PPIDPhO with hot exciton character. PPIDPh with biphenyl substituent at C2 position of PI group exhibits emission peak at 454 nm in non-doped film. The integration of diphenylmethane and diphenyl ether units with PI group in PPIDPhC and PPIDPhO further limits the π-conjugation owing to sp3 hybridized carbon atom and oxygen atom, which results in bluer emission peaking at 433 nm and 437 nm in the aggregated state, respectively. Particularly, the maximum external quantum efficiency (EQEmax) of PPIDPh-based non-doped OLED reaches 10.33 % with CIE coordinates of (0.15, 0.10) and subtle efficiency roll-off of only 7.4 % at high brightness of 1000 cd m−2. The PPIDPhC and PPIDPhO-based non-doped devices display even better color purity with high EQEmax of 8.56 % and 7.90 %, Commission Internationale de ĺEclairage (CIE) coordinates of (0.17, 0.08) and (0.16, 0.08), respectively, matching well with National Television Standards Committee (NTSC) requirement for saturated blue color. Such result is among the best outcomes of non-doped blue fluorescent OLEDs with the same emission color. This result will also shed light on the further development of efficient organic wide bandgap emitter and corresponding high-performance OLED.

Highly efficient hot exciton deep-blue OLEDs based on triphenyl-phosphine oxide modified anthracene derivatives

The utilization of triplet state excitons is important for the efficiency of organic light-emitting diodes (OLEDs). In this work, two isomers (p-PIAnPO and m-PIAnPO) of anthracene-based derivatives with triphenylphosphine oxide (PO) and phenanthroimidazole (PI) in different positions were designed and synthesized. In particular, PO provides large spatial hindrance and promotes hole transport, and PI has excellent bipolar transport ability, which helps to balance carrier transport. The para-linkage (p-PIAnPO) favors conjugation expansion and achieves high luminescence efficiencies, whereas the meta-linkage (m-PIAnPO) provides a highly twisted molecular conformation, thus effectively interrupting conjugation and leading to deep-blue emission. These molecules exhibit excellent thermal stability and efficient electroluminescence properties. Non-doped OLEDs using p-PIAnPO and m-PIAnPO as the light-emitting layers achieve maximum external quantum efficiencies of 6.0% and 4.2% with the λEL at 466 nm and 448 nm, corresponding to high exciton utilization efficiency (EUE) of 59%–88% and 54%–81%. In addition, p-PIAnPO-based OLEDs achieve an ultra-low efficiency roll-off of 1.7% at 1000 cd m−2. Theoretical calculations and experimental results show that the high EUE is mainly attributed to the high-lying reverse intersystem crossing from T3 to S1 namely hot exciton channel.

Novel Fused Core Chromophore Incorporating Spirofluorene and Anthracene Groups for Sky-Blue Emission and Solution-Processed White Devices

New blue-light-emitting materials, 2,7-Bis-[1,1′;3′,1″]terphenyl-spiro-fluorene[3,4]naphthalene (TP-AFF-TP) and spiro-fluorene[3,4]-5-terphenylnaphthalene (TP-ASF) were synthesized based on a fused core with anthracene and spirofluorene. The photoluminescence (PL) maximum values of TP-AFF-TP and TP-ASF in film states exhibited 477 nm and 467 nm within the blue region, respectively. Degradation temperature (Td) values for TP-AFF-TP and TP-ASF were very high at 481 °C and 407 °C, respectively. TP-AFF-TP and TP-ASF exhibited power efficiencies (PE) of 1.03 lm/W and 2.39 lm/W, respectively, along with luminance efficiencies (LE) of 2.55 cd/A and 5.17 cd/A, respectively, in nondoped organic light-emitting diode (OLED) devices in which the newly synthesized compounds were employed as emissive layers. The achieved CIE values were (0.25, 0.45) for TP-AFF-TP and (0.17, 0.31) for TP-ASF. Furthermore, when TP-ASF was utilized as one of the emissive materials in solution-processed white OLED devices, the resultant device showcased a notably high LE of 3.13 cd/A, a PE of 2.69 lm/W, and a white CIE value of (0.30, 0.34).

Hot-Exciton Mechanism and AIE Effect Boost the Performance of Deep-Red Emitters in Non-Doped OLEDs.

Luminescent materials possessing a "hot-exciton" mechanism and aggregation-induced emission (AIE) qualities are well-suited for use as emitting materials in nondoped organic light-emitting diodes (OLEDs), particularly in deep-red regions where their ground state and singlet excited state surfaces are in proximity, leading to the formation of multiple nonradiative channels. However, designing molecules that artificially combine the hot-exciton mechanism and AIE attributes remains a formidable task. In this study, a versatile strategy is presented to achieve hot-exciton fluorescence with AIE property by increasing the first singlet excited (S1 ) state through modulation of the conjugation length of the newly created acceptor unit, matching the energy level of high-lying triplet (Tn ) states, and enhancing exciton utilization efficiency by employing suitable donor moieties. This approach reduces the aggregation-caused quenching (ACQ) in the aggregate state, resulting in the proof-of-concept emitter DT-IPD, which produces an unprecedented external quantum efficiency (EQE) of 12.2% and Commission Internationale de I'Eclairage(CIE)coordinates of (0.69, 0.30) in a deep-red non-doped OLED at 685nm, representing the highest performance among all deep-red OLEDs based on materials with hot-exciton mechanisms. This work provides novel insights into the design of more efficient hot-exciton emitters with AIE properties.

Realizing highly efficient blue electrofluorescence by optimized hybridized local and charge transfer state and balanced carrier mobilities

Carrier mobilities of emitter layer materials are crucial for the efficiency and efficiency stability of non-doped organic light-emitting diodes (OLEDs). However, realizing high and balanced carrier mobilities, particularly electron mobility for organic materials, remains challenging. Herein, we design four blue-emissive quasi-equivalent hybridized local and charge transfer (HLCT) benzoxazole-phenylcarbazole derivatives, and discover the influence of three molecular designs (meta-linkage, phenyl-increasing and large group substitution) on OLED performance. Phenyl group insertion can enhance π-conjugation and regulate the locally excited (LE) component of the HLCT state, which not only contributes to high photoluminescent quantum yield (PLQY) but also maintains the charge-transfer (CT) property for the triplet utilization in OLED. More importantly, π-conjugation enhancement contributes to more regular aggregation, increasing carrier mobilities. Meanwhile, a large group (e.g., tert-butyl) substitution can hinder aggregation and afford bad carrier mobilities between adjacent molecules. As a result, we realize balanced and boosted carrier mobilities (hole: 2.64 × 10−6 cm2 V−1 s−1; electron: 2.40 × 10−5 cm2 V−1 s−1) in the non-doped OLED of 2-(4′-(9-phenyl-9H-carbazol-3-yl)-[1,1′-biphenyl]-4-yl)benzo[d]oxazole (3-PCZPBO), corresponding to the highest external quantum efficiency (EQEmax) of 7.1% with low efficiency rolling-off. This study provides a valuable strategy for the design of efficient blue emitters.

Modifications of Pyridine-3,5-dicarbonitrile Acceptor for Highly Efficient Green-to-Red Organic Light-Emitting Diodes.

The strategy of acceptor modification is a powerful technique for tuning the emission color of thermally activated delayed fluorescence (TADF) emitters. In this study, we have successfully designed and synthesized three TADF emitters with donor-acceptor (D-A) structures using a 4-(diphenylamino)-2,6-dimethylphenyl (TPAm) donor and various pyridine-3,5-dicarbonitrile (PC) acceptor units. As a result, three compounds named TPAmbPPC, TPAm2NPC, and TPAmCPPC exhibited greenish-yellow to orange-red emissions with high photoluminescent quantum yields (76-100%) in thin films. Remarkably, a greenish-yellow device based on TPAmbPPC and TPAm2NPC showed a high maximum external quantum efficiency (EQEmax) of 39.1 and 39.0%, respectively. Furthermore, benefiting from the suitable steric hindrance between the acceptor and donor, the nondoped organic light-emitting diodes (OLEDs) based on TPAmbPPC demonstrated an exceptional EQEmax of 21.6%, indicating its promising potential as an efficient emitter for the application of OLED applications. Furthermore, orange-red OLED devices based on TPAmCPPC exhibited a high EQEmax of 26.2%, a CE of 50.1 cd A-1, and a PE of 52.4 lm W-1.

High‐efficiency thermally activated delayed fluorescence materials via a shamrock‐shaped design strategy to enable OLEDs with external quantum efficiency over 38%

AbstractTo achieve highly‐efficient organic light‐emitting diodes (OLEDs), great efforts have been devoted into constructing thermally activated delayed fluorescence (TADF) with high horizontal dipole ratios (Θ//). Here, we proposed a design strategy by integrating a rigid electron‐accepting oxygen‐bridged boron core with triple electron‐donating groups, which exhibited a “shamrock‐shape”, namely BO‐3DMAC and BO‐3DPAC. Benefiting from the rigid and large‐planar skeletons brought by shamrock‐shaped design, BO‐3DMAC and BO‐3DPAC exhibit high Θ// of 84%/70% and 93%/94% in neat/doped films, respectively, and finally furnish excellent external quantum efficiencies (EQEs) of up to 28.3% and 38.7% in 20 wt% doped OLEDs with sky‐blue emission, as well as adequate EQEs of up to 21.0% and 16.7% in nondoped OLEDs. This work unveils a promising strategy to establish high‐Θ// TADF emitters by constructing large‐planar molecular structures using shamrock‐shaped design.

Highly efficient non-doped organic light-emitting diodes based on long-range coupling and efficient energy transfer

An effective approach to realize high-efficiency exciplex-based organic light-emitting diodes (OLEDs) is proposed by employing long-range coupling between electron-hole pairs and efficient energy transfer. The space-separated holes and electrons form exciplexes through charge-transfer states, and devices with such structures can reduce exciton quenching in a certain extent compared to those based on interfacial exciplexes. Remarkable external quantum efficiency about 12.6% is achieved by introducing a yellow exciplex system in a donor/spacer/acceptor structure because of the suppression of exciton quenching and the efficient energy transfer. Such a unique strategy is beneficial to better utilizing the triplet excitons and thus achieving high performance exciplex-based OLEDs.

Novel electro-fluorescent materials with hybridized local and charge transfer (HLCT) excited state for highly efficient deep red to near-infrared OLEDs

Deep red (DR) and near-infrared (NIR) fluorescent emitters are often plagued by design difficulties due to the strong intramolecular interaction. Herein, two new DR and NIR molecules, 4-(7-(10-ethyl-10H-phenoxazin-3-yl)benzo[c][1,2,5]thiadiazol-4-yl)-N,N-diphenylaniline (TPAC2) and 4-(9-(10-ethyl-10H-phenoxazin-3-yl)naphtho[2,3-c][1,2,5]thiadiazol-4-yl)-N,N-diphenylaniline (TPANZC2), characteristic with hybrid local and charge transfer were achieved via iteration with a theoretical combined experimental method. Both emitters realized the reverse intersystem crossing (RISC) via the hot exciton channel. As results, the non-doped organic light-emitting diodes (OLEDs) of TPAC2 and TPANZC2 achieved the maximum external quantum efficiency (EQEmax) of 2.4% at 680 nm and 1.1% at 755 nm, respectively. Both conspicuous upward EQE curves demonstrated excellent resistance to efficiency roll-off. The ternary co-doping system further unleashed the potential in NIR emission, the co-doped device with 5 wt% TPANZC2 achieved an EQE of 4.6% with emission at 724 nm, which is among the best results of HLCT-NIR fluorescent OLEDs to date.

Tuning Photophysical Properties via Positional Isomerization of the Pyridine Ring in Donor–Acceptor-Structured Aggregation-Induced Emission Luminogens Based on Phenylmethylene Pyridineacetonitrile Derivatives

A series of aggregation-induced emission (AIE)-featured phenylmethylene pyridineacetonitrile derivatives named o-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-2-yl)acrylonitrile), m-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-3-yl)acrylonitrile), and p-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-4-yl)acrylonitrile) have been synthesized by tuning the substitution position of the pyridine ring. The linkage manner of the pyridine ring had influences on the molecular configuration and conjugation, thus leading to different photophysical properties. The absorption and fluorescence emission peak showed a bathochromic shift when the linking position of the pyridine ring changed from the meta to the ortho and para position. Meanwhile, o-DBCNPy exhibited the highest fluorescence quantum yield of 0.81 and the longest fluorescence lifetime of 7.96 ns as a neat film among all three isomers. Moreover, non-doped organic light-emitting diodes (OLEDs) were assembled in which the molecules acted as the light-emitting layer. Due to the relatively prominent emission properties, the electroluminescence (EL) performance of the o-DBCNPy-based OLED was superior to those of the devices based on the other two isomers with an external quantum efficiency (EQE) of 4.31%. The results indicate that delicate molecular modulation of AIE molecules could endow them with improved photophysical properties, making them potential candidates for organic photoelectronic devices.

Aggregation-induced emission phenanthroline derivatives for ultrahigh color purity deep blue OLEDs with CIEx≤0.15 and CIEy≤0.08 and low efficiency roll-off

Due to the limited molecular design strategy, the development of ultrahigh color purity deep blue aggregation-induced emission (AIE) emitters with excellent photophysical and electroluminescence performances is still facing challenges at present. In this study, an effective design strategy for deep blue emitters is proposed, which can improve the performances of non-doped organic light-emitting diodes (OLEDs) by adjusting the link mode of the phenyl bridge and utilizing the steric hindrance effect of the rigid plane. Two new emitters, 3BCzPT and 4BCzPT, were obtained with phenanthroline acceptor and carbazole donor for deep blue emitting OLEDs. Particularly, 3BCzPT has been proven to have AIE characteristics through photophysical properties. Non-doped OLEDs with 3BCzPT demonstrate prominent electroluminescence (EL) performances reaching a maximum current efficiency (CEmax) of 6.3 cd A−1 and maximum external quantum efficiency (EQEmax) of 3.81%, well as ultrahigh color purity with Commission Internationale de L'Eclairage (CIE) coordinates of (0.151, 0.053). While the parameters of non-doped OLED based 4BCzPT are 4.2 cd A−1, 1.96% and (0.147, 0.082). Both emitters exhibit narrow EL spectra with the full-width at half maximum (FWHM) of 56 and 52 nm.

Energy-Efficient Stable Hyperfluorescence Organic Light-Emitting Diodes with Improved Color Purities and Ultrahigh Power Efficiencies Based on Low-Polar Sensitizing Systems.

Multi-resonance (MR) molecules with thermally activated delayed fluorescence (TADF) are emerging as promising candidates for high-definition displays because of their narrow emission spectra. However, the electroluminescence (EL) efficiencies and spectra of MR-TADF molecules are highly sensitive to hosts and sensitizers when applied to organic light-emitting diodes (OLEDs), and the highly polar environments in devices often lead to significantly broadened EL spectra. In this study, a proof-of-concept TADF sensitizer (BTDMAC-XT) with low polarity, high steric hindrance, and concentration-quenching free feature is constructed, which acts as a good emitter in doped and non-doped OLEDs with high external quantum efficiencies (ηext s) of 26.7% and 29.3%, respectively. By combining BTDMAC-XT with conventional low-polarity hosts, low-polarity sensitizing systems with a small carrier injection barrier and full exciton utilization are constructed for the MR-TADF molecule BN2. Hyperfluorescence (HF) OLEDs employing the low-polar sensitizing systems successfully improve the color quality of BN2 and afford an excellent ηext of 34.4%, a record-high power efficiency of 166.3lmW-1 and a long operational lifetime (LT50 =40309h) at an initial luminance of 100cdm-2 . These results provide instructive guidance for the sensitizer design and device optimization for energy-efficient and stable HF-OLEDs with high-quality light.

Deep blue fluorescent emitters based imidazole and carbazole for non-doped organic light emitting diodes with CIEy≤0.05

Two fluorescent emitters based imidazole and carbazole were synthesized for deep blue emission organic light-emitting diodes (OLED) with non-doped structure. The photophysical, thermal and electrochemical properties are investigated with high decomposition temperature up to 391 and 380 °C, and strong deep blue emission. Single carrier devices were also fabricated to show that two compounds have good bipolar carrier transport characteristic. The non-doped fluorescent OLED devices using the two compounds as emitting layers are designed among which the devices achieved the maximum external quantum efficiency of 1.66% and 1.56%, respectively. Besides, the deep blue emission peak of 412 nm with Commission Internationale de l’Eclairage (CIE) coordinate of (0.16, 0.04), and 420 nm with CIE coordinate of (0.16, 0.05) were also realized. The small CIEy value of 0.04 and 0.05 obtained in this work are very significant for high color purity full-color display, which is also among the best CIEy value results ever reported as deep blue bipolar emitters.

Inside Back Cover: Aggregation‐induced emission luminogens for organic light‐emitting diodes with a single‐component emitting layer

Aggregation-induced emission luminogens (AIEgens) have received considerable attention from researchers owing to their high photoluminescence quantum yield (PLQY) in the aggregated state. In article number (e199), Dong Hoon Choi and co-workers have reviewed the recent molecular design strategies as well as photophysical and electroluminescent properties of AIEgens used in non-doped organic light-emitting diodes.

Synthesis, photoluminescence and electroluminescence properties of a new blue emitter with aggregation-induced emission and thermally activated delayed fluorescence characteristics

The emitters with aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in high demand in organic light-emitting diodes (OLEDs) owing to their strong fluorescence and high exciton utilization under electrical excitation. Herein, a blue emitter, 10-(3-((3,5-di(9H-carbazol-9-yl)phenyl)sulfonyl)phenyl)-9,9-dimethyl-9,10-dihydroacridine (m-CZ-DPS-DMAC), was synthesized by incorporating carbazole as skeleton, acridine as electron donor, and diphenyl sulfone as electron acceptor. m-CZ-DPS-DMAC emits weak fluorescence in good solvent, while it is obviously enhanced in the aggregate state, which is typical of AIE molecules. Meanwhile, the energy levels of the singlet and triplet states (ΔEST) of the molecule is relatively small, and it also exhibits obvious temperature dependence and oxygen sensitivity, which directly proves its TADF properties. In view of the above properties, a series of non-doped and doped OLEDs were prepared using m-CZ-DPS-DMAC as light-emitting layers. Among them, non-doped OLED (device A) displays blue emission (488 nm) with the turn-on voltage (Von), the maximum luminance (Lmax), the maximum current efficiency (CEmax), the maximum power efficiency (PEmax) and the maximum external quantum efficiency (EQEmax) of 2.6 V, 3460 cd m−2, 26.09 cd A–1, 29.26 lm W−1 and 10.05%, respectively. Doped OLED (device C) constructed based on m-CZ-DPS-DMAC doped 30% in DPEPO shows the satisfactory performance with the maximum emission peak of 486 nm, the Von of 2.8 V, the Lmax of 4571 cd m−2, the CEmax of 21.37 cd A–1, the PEmax of 22.37 lm W−1, and the EQEmax of 9.44%, respectively. The outstanding performance of m-CZ-DPS-DMAC proves that it is a potential material for designing blue OLEDs with AIE-TADF properties.

Simple excited-state modification toward a deep-blue hybridized local and charge-transfer (HLCT) fluorophore and non-doped organic light-emitting diodes

A deep-blue HLCT emitter DCZ2F showing the state-of-the-art EQE of 5.62% and CIE coordinates of (0.163, 0.035) was achieved in non-doped OLEDs.