Detection Of Nodules In Chest Radiographs Research Articles

A systematic approach to deep learning-based nodule detection in chest radiographs

Lung cancer is a serious disease responsible for millions of deaths every year. Early stages of lung cancer can be manifested in pulmonary lung nodules. To assist radiologists in reducing the number of overseen nodules and to increase the detection accuracy in general, automatic detection algorithms have been proposed. Particularly, deep learning methods are promising. However, obtaining clinically relevant results remains challenging. While a variety of approaches have been proposed for general purpose object detection, these are typically evaluated on benchmark data sets. Achieving competitive performance for specific real-world problems like lung nodule detection typically requires careful analysis of the problem at hand and the selection and tuning of suitable deep learning models. We present a systematic comparison of state-of-the-art object detection algorithms for the task of lung nodule detection. In this regard, we address the critical aspect of class imbalance and and demonstrate a data augmentation approach as well as transfer learning to boost performance. We illustrate how this analysis and a combination of multiple architectures results in state-of-the-art performance for lung nodule detection, which is demonstrated by the proposed model winning the detection track of the Node21 competition. The code for our approach is available at https://github.com/FinnBehrendt/node21-submit.

Development and Validation of a Deep Learning–Based Synthetic Bone-Suppressed Model for Pulmonary Nodule Detection in Chest Radiographs

Dual-energy chest radiography exhibits better sensitivity than single-energy chest radiography, partly due to its ability to remove overlying anatomical structures. To develop and validate a deep learning-based synthetic bone-suppressed (DLBS) nodule-detection algorithm for pulmonary nodule detection on chest radiographs. This decision analytical modeling study used data from 3 centers between November 2015 and July 2019 from 1449 patients. The DLBS nodule-detection algorithm was trained using single-center data (institute 1) of 998 chest radiographs. The DLBS algorithm was validated using 2 external data sets (institute 2, 246 patients; and institute 3, 205 patients). Statistical analysis was performed from March to December 2021. DLBS nodule-detection algorithm. The nodule-detection performance of DLBS model was compared with the convolution neural network nodule-detection algorithm (original model). Reader performance testing was conducted by 3 thoracic radiologists assisted by the DLBS algorithm or not. Sensitivity and false-positive markings per image (FPPI) were compared. Training data consisted of 998 patients (539 men [54.0%]; mean [SD] age, 54.2 [9.82] years), and 2 external validation data sets consisted of 246 patients (133 men [54.1%]; mean [SD] age, 55.3 [8.7] years) and 205 patients (105 men [51.2%]; mean [SD] age, 51.8 [9.1] years). Using the external validation data set of institute 2, the bone-suppressed model showed higher sensitivity compared with that of the original model for nodule detection (91.5% [109 of 119] vs 79.8% [95 of 119]; P < .001). The overall mean of FPPI with the bone-suppressed model was reduced compared with the original model (0.07 [17 of 246] vs 0.09 [23 of 246]; P < .001). For the observer performance testing with the data of institute 3, the mean sensitivity of 3 radiologists was 77.5% (95% [CI], 69.9%-85.2%), whereas that of radiologists assisted by DLBS modeling was 92.1% (95% CI, 86.3%-97.3%; P < .001). The 3 radiologists had a reduced number of FPPI when assisted by the DLBS model (0.071 [95% CI, 0.041-0.111] vs 0.151 [95% CI, 0.111-0.210]; P < .001). This decision analytical modeling study found that the DLBS model was more sensitive to detecting pulmonary nodules on chest radiographs compared with the original model. These findings suggest that the DLBS model could be beneficial to radiologists in the detection of lung nodules in chest radiographs without need of the specialized equipment or increase of radiation dose.

Utilizing Synthetic Nodules for Improving Nodule Detection in Chest Radiographs.

Algorithms that automatically identify nodular patterns in chest X-ray (CXR) images could benefit radiologists by reducing reading time and improving accuracy. A promising approach is to use deep learning, where a deep neural network (DNN) is trained to classify and localize nodular patterns (including mass) in CXR images. Such algorithms, however, require enough abnormal cases to learn representations of nodular patterns arising in practical clinical settings. Obtaining large amounts of high-quality data is impractical in medical imaging where (1) acquiring labeled images is extremely expensive, (2) annotations are subject to inaccuracies due to the inherent difficulty in interpreting images, and (3) normal cases occur far more frequently than abnormal cases. In this work, we devise a framework to generate realistic nodules and demonstrate how they can be used to train a DNN identify and localize nodular patterns in CXR images. While most previous research applying generative models to medical imaging are limited to generating visually plausible abnormalities and using these patterns for augmentation, we go a step further to show how the training algorithm can be adjusted accordingly to maximally benefit from synthetic abnormal patterns. A high-precision detection model was first developed and tested on internal and external datasets, and the proposed method was shown to enhance the model's recall while retaining the low level of false positives.

Both fluid intelligence and visual object recognition ability relate to nodule detection in chest radiographs

SummaryRecent work suggests that some aspects of lung nodule detection ability may relate to object recognition ability. However, this work only sampled radiological novices. Here, we further investigate whether object recognition ability predicts lung nodule detection ability (as measured by the Vanderbilt Chest Radiograph Test or VCRT), after controlling for experience and fluid intelligence, in a sample of radiologists and nonradiologists. We find that radiological experience accounts for approximately 50% of VCRT variance. After controlling for experience, fluid intelligence and object recognition ability account for an additional 15% of VCRT variance. These results suggest that while training is key in learning to detect nodules, given the same experience level, those with higher fluid intelligence and object recognition ability perform better. The recently proposed construct of visual object recognition ability may add unique information relative to general cognitive skills in assessing aptitude for a career in radiology.

Computerized Detection of Lung Nodules by Means of “Virtual Dual-Energy” Radiography

Major challenges in current computer-aided detection (CADe) schemes for nodule detection in chest radiographs (CXRs) are to detect nodules that overlap with ribs and/or clavicles and to reduce the frequent false positives (FPs) caused by ribs. Detection of such nodules by a CADe scheme is very important, because radiologists are likely to miss such subtle nodules. Our purpose in this study was to develop a CADe scheme with improved sensitivity and specificity by use of "virtual dual-energy" (VDE) CXRs where ribs and clavicles are suppressed with massive-training artificial neural networks (MTANNs). To reduce rib-induced FPs and detect nodules overlapping with ribs, we incorporated the VDE technology in our CADe scheme. The VDE technology suppressed rib and clavicle opacities in CXRs while maintaining soft-tissue opacity by use of the MTANN technique that had been trained with real dual-energy imaging. Our scheme detected nodule candidates on VDE images by use of a morphologic filtering technique. Sixty morphologic and gray-level-based features were extracted from each candidate from both original and VDE CXRs. A nonlinear support vector classifier was employed for classification of the nodule candidates. A publicly available database containing 140 nodules in 140 CXRs and 93 normal CXRs was used for testing our CADe scheme. All nodules were confirmed by computed tomography examinations, and the average size of the nodules was 17.8 mm. Thirty percent (42/140) of the nodules were rated "extremely subtle" or "very subtle" by a radiologist. The original scheme without VDE technology achieved a sensitivity of 78.6% (110/140) with 5 (1165/233) FPs per image. By use of the VDE technology, more nodules overlapping with ribs or clavicles were detected and the sensitivity was improved substantially to 85.0% (119/140) at the same FP rate in a leave-one-out cross-validation test, whereas the FP rate was reduced to 2.5 (583/233) per image at the same sensitivity level as the original CADe scheme obtained (Difference between the specificities of the original and the VDE-based CADe schemes was statistically significant). In particular, the sensitivity of our VDE-based CADe scheme for subtle nodules (66.7% = 28/42) was statistically significantly higher than that of the original CADe scheme (57.1% = 24/42). Therefore, by use of VDE technology, the sensitivity and specificity of our CADe scheme for detection of nodules, especially subtle nodules, in CXRs were improved substantially.

Development and evaluation of a computer‐aided diagnostic scheme for lung nodule detection in chest radiographs by means of two‐stage nodule enhancement with support vector classification

To develop a computer-aided detection (CADe) scheme for nodules in chest radiographs (CXRs) with a high sensitivity and a low false-positive (FP) rate. The authors developed a CADe scheme consisting of five major steps, which were developed for improving the overall performance of CADe schemes. First, to segment the lung fields accurately, the authors developed a multisegment active shape model. Then, a two-stage nodule-enhancement technique was developed for improving the conspicuity of nodules. Initial nodule candidates were detected and segmented by using the clustering watershed algorithm. Thirty-one shape-, gray-level-, surface-, and gradient-based features were extracted from each segmented candidate for determining the feature space, including one of the new features based on the Canny edge detector to eliminate a major FP source caused by rib crossings. Finally, a nonlinear support vector machine (SVM) with a Gaussian kernel was employed for classification of the nodule candidates. To evaluate and compare the scheme to other published CADe schemes, the authors used a publicly available database containing 140 nodules in 140 CXRs and 93 normal CXRs. The CADe scheme based on the SVM classifier achieved sensitivities of 78.6% (110/140) and 71.4% (100/140) with averages of 5.0 (1165/233) FPs/image and 2.0 (466/233) FPs/image, respectively, in a leave-one-out cross-validation test, whereas the CADe scheme based on a linear discriminant analysis classifier had a sensitivity of 60.7% (85/140) at an FP rate of 5.0 FPs/image. For nodules classified as "very subtle" and "extremely subtle," a sensitivity of 57.1% (24/42) was achieved at an FP rate of 5.0 FPs/image. When the authors used a database developed at the University of Chicago, the sensitivities was 83.3% (40/48) and 77.1% (37/48) at an FP rate of 5.0 (240/48) FPs/image and 2.0 (96/48) FPs/image, respectively. These results compare favorably to those described for other commercial and non-commercial CADe nodule detection systems.

Geometrical and texture features estimation of lung cancer and TB images using chest X-ray database

Early detection is the most promising way to enhance a patient’s chance for survival of lung cancer. Detection of disease through image is one of the most challenging tasks in medical image analysis. A computer algorithm for nodule detection in chest radiographs is presented. The algorithm includes four main steps like, image acquisition, image pre-processing, nodule detection, and feature extraction. Total 75 lung cancer and TB images are used during experiment to estimate geometrical and texture features. Manual lung field segmentation with Gray Level Co-occurrence Matrix (GLCM) techniques are used for segmentation and texture features estimation respectively.

Fully automatic lung segmentation and rib suppression methods to improve nodule detection in chest radiographs

Computer-aided Diagnosis (CAD) systems can assist radiologists in several diagnostic tasks. Lung segmentation is one of the mandatory steps for initial detection of lung cancer in Posterior-Anterior chest radiographs. On the other hand, many CAD schemes in projection chest radiography may benefit from the suppression of the bony structures that overlay the lung fields, e.g. ribs. The original images are enhanced by an adaptive contrast equalization and non-linear filtering. Then an initial estimation of lung area is obtained based on morphological operations and then it is improved by growing this region to find the accurate final contour, then for rib suppression, we use oriented spatial Gabor filter. The proposed method was tested on a publicly available database of 247 chest radiographs. Results show that this method outperformed greatly with accuracy of 96.25% for lung segmentation, also we will show improving the conspicuity of lung nodules by rib suppression with local nodule contrast measures. Because there is no additional radiation exposure or specialized equipment required, it could also be applied to bedside portable chest x-rays. In addition to simplicity of these fully automatic methods, lung segmentation and rib suppression algorithms are performed accurately with low computation time and robustness to noise because of the suitable enhancement procedure.

A computer-aided diagnosis system for detection of lung nodules in chest radiographs with an evaluation on a public database

A computer algorithm for nodule detection in chest radiographs is presented. The algorithm consists of four main steps: (i) image preprocessing; (ii) nodule candidate detection; (iii) feature extraction; (iv) candidate classification. Two optional extensions to this scheme are tested: candidate selection and candidate segmentation. The output of step (ii) is a list of circles, which can be transformed into more detailed contours by the extra candidate segmentation step. In addition, the candidate selection step (which is a classification step using a small number of features) can be used to reduce the list of nodule candidates before step (iii). The algorithm uses multi-scale techniques in several stages of the scheme: Candidates are found by looking for local intensity maxima in Gaussian scale space; nodule boundaries are detected by tracing edge points found at large scales down to pixel scale; some of the features used for classification are taken from a multi-scale Gaussian filterbank. Experiments with this scheme (with and without the segmentation and selection steps) are carried out on a previously characterized, publicly available database, that contains a large number of very subtle nodules. For this database, counting as detections only those nodules that were indicated with a confidence level of 50% or more, radiologists previously detected 70% of the nodules. For our algorithm, it turns out that the selection step does have an added value for the system, while segmentation does not lead to a clear improvement. With the scheme with the best performance, accepting on average two false positives per image results in the identification of 51% of all nodules. For four false positives, this increases to 67%. This is close to the previously reported 70% detection rate of the radiologists.

Computer‐aided diagnostic scheme for lung nodule detection in digital chest radiographs by use of a multiple‐template matching technique

We have been developing a computer-aided diagnostic (CAD) scheme to assist radiologists in improving the detection of pulmonary nodules in chest radiographs, because radiologists can miss as many as 30% of pulmonary nodules in routine clinical practice. A key to the successful clinical application of a CAD scheme is to ensure that there are only a small number of false positives that are incorrectly reported as nodules by the scheme. In order to significantly reduce the number of false positives in our CAD scheme, we developed, in this study, a multiple-template matching technique, in which a test candidate can be identified as a false positive and thus eliminated, if its largest cross-correlation value with non-nodule templates is larger than that with nodule templates. We describe the technique for determination of cross-correlation values for test candidates with nodule templates and non-nodule templates, the technique for creation of a large number of nodule templates and non-nodule templates, and the technique for removal of nodulelike non-nodule templates and non-nodulelike nodule templates, in order to achieve a good performance. In our study, a large number of false positives (44.3%) were removed with reduction of a very small number of true positives (2.3%) by use of the multiple-template matching technique. We believe that this technique can be used to significantly improve the performance of CAD schemes for lung nodule detection in chest radiographs.

Directed versus free search for nodules in chest radiographs.

Nodule detection in chest radiographs was compared under free-search and directed-search conditions. In directed search, the observer was told which quadrant of the chest to examine. Each of five observers read a test series of 96 radiographs seven times. Results were analyzed in terms of signal detection theory. NOdule detection was found to be significantly more accurate in directed search than in free search. The results were compared with those of previous experiments which found no such effect or an opposite effect. The present results do not support a previously hypothesized preattentive visual mechanism with better detection capabilities than focused visual attention.