NMR Analysis Research Articles

Methyl and Benzyl (Ethyl 3,4-di-O-benzyl-2-O-benzoyl-1-thio-β-d-glucopyranosyl)uronate

Methyl and benzyl (ethyl 3,4-di-O-benzyl-2-O-benzoyl-1-thio-β-D-glucopyranosyl)uronate were synthesised from a protected thioglycoside in three steps. A regioselective ring opening of the benzylidene acetal with BH3.THF generated C6-OH material, which was subsequently oxidised using biphasic TEMPO/BAIB conditions. The resultant uronic acid was esterified with either a methyl or benzyl moiety. The products were obtained on a multigram scale and fully characterised by 1H, 13C and 2D NMR, alongside MS and IR analysis.

Bifidobacterium animalis subsp. lactis HN019 live probiotics and postbiotics: production strategies and bioactivity evaluation for potential therapeutic properties

Introduction:B. animalis subsp. lactis HN019 is a commercially available well-characterized probiotic with documented effects on human health, such as the ability to enhance the immune function and to balance the intestinal microbiome. Therefore, optimizing the manufacturing process to improve sustainability, increasing biomass yields and viability, and avoiding animal -derived nutrients in the medium to meet vegan consumer’s needs, is currently of interest. Besides the established use of live probiotic cells, alternative supplements indicated as postbiotics, like non-viable cells and/or probiotics derived bioactive molecules might be considered as potential next generation biotherapeutics. In fact, advantages of postbiotics include fewer technological limitations, such as easier production processes and scale-up, and even higher specificity.Methods: In this work, medium design together with different fermentation strategies such as batch, fed-batch and in situ product removal on lab-scale bioreactors were combined. Medium pretreatment by ultrafiltration and protease digestion was performed to reduce polysaccharidic contaminants and facilitate the purification of secreted exopolysaccharides (EPS). The latter were isolated from the fermentation broth and characterized through NMR, GC-MS and SEC-TDA analyses. The expression of TLR-4, NF-kb and IL-6 in LPS challenged differentiated CaCo-2 cells treated with EPS, live and heat-killed B. lactis cells/broth, was evaluated in vitro by western blotting and ELISA. Zonulin was also assessed by immunofluorescence assays.Results and Discussion: The titer of viable B. lactis HN019 was increased up to 2.9 ± 0.1 x 1010 on an animal-free semidefined medium by applying an ISPR fermentation strategy. Medium pre-treatment and a simple downstream procedure enriched the representativity of the EPS recovered (87%), the composition of which revealed the presence of mannuronic acid among other sugars typically present in polysaccharides produced by bifidobacteria. The isolated EPS, live cells and whole heat inactivated broth were compared for the first up to date for their immunomodulatory and anti-inflammatory properties and for their ability to promote intestinal barrier integrity. Interestingly, EPS and live cells samples demonstrated immune-stimulating properties by downregulating the expression of TLR-4 and NF-kb, and the ability to promote restoring the integrity of the intestinal barrier by up-regulating the expression of zonulin, one of the tight junctions forming proteins. Postbiotics in the form of heat killed broth only reduced NF-kb expression, whereas they did not seem effective in the other tested conditions.

Production of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) by Bacillus megaterium LVN01 Using Biogas Digestate

The Bacillus megaterium LVN01 species native to Colombia has demonstrated the ability to metabolize different coproducts or industrial waste (such as fique juice, cane molasses, and residual glycerol) and accumulate polyhydroxybutyrate (PHB), giving it potential in the bioplastics industry. In this research, the potential of liquid digestate as a carbon source for the production of PHA polymers in fermentation processes with this bacterial strain was evaluated. Favorably, it was found that B. megaterium utilizes the nutrients from this residual substrate to multiply appropriately and efficiently synthesize poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Bench-scale aerobic batch fermentation, under the operational conditions of this research [volume: 3 L; temperature: 30.8 °C; agitation: 400 rpm; pH: 7.0 ± 0.2; dissolved oxygen: 100% saturation; antifoam: 10% (v/v)], generated maximum values of dry cell weight (DCW) (0.56 g cell L−1) at 60 h, while the maximum PHBV yield (360 mg PHBV L−1) occurred at 16 h, which is very favorable for sustainable degradable bioplastics production. Additionally, GC–MS and NMR analyses confirmed that the PHBV copolymer synthesized by B. megaterium is made up of the monomers 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV). Furthermore, the thermal properties determined by TGA (Tonset = 283.1 °C; Tendset = 296.98 °C; Td = 290.114 °C) and DSC (Tm = °C 155.7 °C; ΔHf = 19.80 J g−1; Xcr = 18.17%) indicate that it is a thermally stable biopolymer with low percentages of crystallinity, providing flexibility that facilitates molding, adaptation, and application in various industrial sectors.

Redox-Switchable Aromaticity in a Helically Extended Indeno[2,1-c]fluorene.

Molecular switches have received major attention to enable the reversible modulation of various molecular properties and have been extensively used as trigger elements in diverse fields, including molecular machines, responsive materials, and photopharmacology. Antiaromaticity is a fascinating property that has attracted not only significant fundamental interest but is also increasingly relevant in different applications, in particular organic (opto)electronics. However, designing systems in which (anti)aromaticity can be judiciously and reversibly switched ON and OFF remains challenging. Herein, we report a helicene featuring an indenofluorene-bridged bisthioxanthylidene as a novel switch wherein a simultaneous two-electron (electro)chemical redox process allows highly reversible modulation of its (anti)aromatic character. Specifically, the two thioxanthylidene rotors, attached to the initially aromatic indenofluorene scaffold via overcrowded alkenes, adopt an anti-folded structure, which upon oxidation convert to singly bonded, twisted conformations. This is not only associated with significant (chir)optical changes but importantly also results in formation of the fully conjugated, formally antiaromatic as-indacene motif in the helical core of the switch. This process proceeds without the buildup of radical cation intermediates and thus enables highly reversible switching of molecular geometry, aromaticity, absorbance, and chiral expression under ambient conditions, as evidenced by NMR, UV-vis, CD, and (spectro)electrochemical analyses, supported by DFT calculations. We expect this concept to be extendable to a wide range of robust antiaromatic-aromatic switches and to provide a basis for modulation of the structure and properties of these fascinating inherently chiral polycyclic π-scaffolds.

Synthesis and logic gate application of quinoline schiff base probe for fluorescence detection of mercury ions

Herein, we report the synthesis of a small molecule quinoline Schiff-base “turn-on” fluorescence probe L, denoted as (2-NC9H6)C(H)=N(C6H4OCH3-p), utilizing 4-aminoanisole and quinoline-2-carboxaldehyde as precursors. The synthesized probe was comprehensively characterized through EA,1H/13C NMR, FT-IR, and ESI-MS spectral analysis. In a CH3CN/H2O solution (1/1, v/v, 0.01 M PBS buffer, pH = 7.30), probe L responded to Hg(II) with high sensitivity (LOD = 2.98 × 10−7 M) and selectivity. Upon binding to Hg(II), the fluorescence of the probe shifted from being initially off to a distinct blue emission. The probe L to Hg(II) binding ratio was 1:1 and the binding constant was 1.955 × 104 M−1. The detection mechanism of Hg(II) by probe L is due to the complex formation between the metal ion and imine nitrogen (–CH = N), thus causing chelation-enhanced fluorescence. TD-DFT studies at the B3LYP/6-31G(d) level of theory further confirmed that the complexation of L and Hg(II) occurred. Finally, probe L could reversibly identify Hg(II) upon adding EDTA, thus developing a molecular logic gate. In addition, this probe was successfully used to detect Hg(II) in actual water samples.

Retentive bio-based chemical gel for removing glues from water-sensitive wooden artworks

Aged animal glues degrade and weaken over time, resulting in flakes and cracks on the material employed by wooden manufacturers and luthiers. Because of this deterioration, conservators and restorers remove aged water-soluble glues with a water swab, smoothing enough to clean them mechanically and putting on new reversible glues. However, it raises the question of whether a water swab can control moisture delivery while removing glue from wood, a hygroscopic and water-sensitive material.This study formulated a chemically crosslinked film-forming hydrogel based on sodium alginate (SA) with (3-Glycidoxypropyl)trimethoxysilane (GPTMS) and calcium chloride, named as CA-GPTMS to construct a retentive gel. Synthesized gel materials were characterized using several methods: liquid state NMR, FTIR-ATR, and SEM-EDS analyses were involved in examining the cross-linking process, while moisture and mechanical properties were examined to understand its suitability for the cleaning application process. The strategies for applying the CA-GPTMS gel on wood surface were to selectively soften the glue and to remove it as well as leave no residues on the wood surface. The cleaning process was investigated by using different techniques, i.e., stereomicroscopy, reflection-FTIR, and SEM-EDS. Compared to traditional rigid Agar gel, the CA-GPTMS gel appeared successfully resistant to destruction and was suitable for application on highly water-sensitive surfaces.

Development of a novel ratiometric fluorescent probe for real-time monitoring of acidic pH and its applications in food samples and biosystem

In this research, a high-efficiency ratiometric fluorescent probe TZTF for sensitive detecting the fluctuations of acidic pH was synthesized. The fluorescent color changed from bright blue to orange in the pH values range from 8.0 to 1.0 with the pKa value of 5.41. Meanwhile, the probe demonstrated excellent selectivity, good anti-interference ability, prominent reversibility, outstanding photostability, and low cytotoxicity. The detection mechanism of TZTF towards acidic pH was verified through 1H NMR analysis and DFT calculation. Additionally, probe TZTF was also applied to evaluate the freshness of meat samples, as the pH value of meat samples may decrease if they are not stored properly, and the subsequent acid-catalyzed denaturation of proteins may pose a threat to human health through the food chain. More importantly, fluorescence imaging experiments confirmed that TZTF is appropriate for real-time tracking of pH variations in living cells and living zebrafish.

Exploring Salivary Metabolic Alterations in Type 2 Diabetes: Implications for Dental Caries and Potential Influences of HbA1c and Vitamin D Levels

Diabetes mellitus is considered to be the most common health issue affecting almost 1 in 11 adults globally. Oral health complications including xerostomia, periodontal disease, dental caries, and soft tissue lesions are prevalent among individuals with diabetes, and therefore an understanding of the potential association between salivary metabolites and dental caries progression would enable the early detection and prevention of this non-communicable disease. Therefore, the aim of this study was to compare salivary biomarkers between individuals with type 2 diabetes (T2DM) with those without this disorder (ND) using 1H NMR-based metabolomics strategies. The objectives were to identify T2DM-associated biomarker signatures and their potential impact on dental caries. In addition, HbA1c and vitamin D levels were also analysed for this purpose. Methods: Stimulated whole-mouth saliva (SWS) samples were collected from T2DM and ND (n = 30 in each case) participants randomly selected from a group of 128 participants recruited for this case–control study. All participants were advised to refrain from eating, drinking, and smoking for at least 1–2 h prior to sample collection. Following preparation, SWS supernatants underwent 1H NMR analysis at an operating frequency of 800 MHz, and the dataset acquired was analysed using a range of multivariate metabolomics techniques. Results: Metabolomics analysis of data acquired demonstrated that, together with up- and downregulated blood HbA1c and vitamin D levels, key salivary discriminators between these two classifications included lactate, taurine, creatinine, α-glucose, and formate to a lesser extent. The bacterial catabolites lactate and formate were both significantly upregulated in the T2DM group, and these have previously been implicated in the pathogenesis of dental caries. Significance analysis of metabolites (SAM)-facilitated AUROC analysis yielded an 83% accuracy for this distinction. Conclusion: In conclusion, this study highlights the significant differences in salivary metabolites between individuals with T2DM and healthy controls. Such differences appear to be related to the development and progression of dental caries in T2DM patients.

Conformational Analysis of 1,3-Difluorinated Alkanes.

Fluorine substitution can have a profound impact on molecular conformation. Here, we present a detailed conformational analysis of how the 1,3-difluoropropylene motif (-CHF-CH2-CHF-) determines the conformational profiles of 1,3-difluoropropane, anti- and syn-2,4-difluoropentane, and anti- and syn-3,5-difluoroheptane. It is shown that the 1,3-difluoropropylene motif strongly influences alkane chain conformation, with a significant dependence on the polarity of the medium. The conformational effect of 1,3-fluorination is magnified upon chain extension, which contrasts with vicinal difluorination. Experimental evidence was obtained from NMR analysis, where polynomial complexity scaling simulation algorithms were necessary to enable J-coupling extraction from the strong second-order spectra, particularly for the large 16-spin systems of the difluorinated heptanes. These results improve our understanding of the conformational control toolkit for aliphatic chains, yield simple rules for conformation population analysis, and demonstrate quantum mechanical time-domain NMR simulations for liquid state systems with large numbers of strongly coupled spins.

Designing pH-Responsive alizarin hybrids with easily tunable physicochemical properties via polymer grafting

This study focuses on the synthesis and characterization of novel pH-sensitive color materials based on alizarin, (1,2-dihydroxyanthraquinone), a natural pigment with versatile properties. The polymer-based indicators were prepared by grafting poly(methyl methacrylate) (PMMA) and poly(2-hydroxyethyl methacrylate) (PHEMA) from alizarin through an ester pH-liable bond, allowing for easy tunability of their physicochemical properties. The synthesis process involved the esterification of alizarin using 2-bromo-2-methylpropionyl bromide, facilitated by triethylamine as an acid scavenger. The resulting alizarin served as a difunctional initiator for atom transfer radical polymerization (ATRP) of methyl methacrylate and 2-hydroxyethyl methacrylate. The molecular structures of the synthesized hybrids were confirmed using 1H NMR and GPC analyses. The color characteristic, surface energy, thermal stability, and pH sensing activity of the alizarin-based hybrids were studied according to the type of grafted polymer nature as well as their degree of polymerization. PHEMA-grafted alizarin showed more rapid and more visible color changes under the influence of NH3 vapours compared to PMMA hybrids, due to their less hydrophobic nature. Furthermore, kinetic plots demonstrated various hydrolysis rates, with PMMA hydrolysis being slower than that of PHEMA due to its stronger hydrophobic character. UV–Vis spectra and GPC traces confirmed the occurrence of hydrolysis and successful cleavage of the ester bond links between the grafted polymers and alizarin with a decrease of the molar mass by a factor of two as expected. Such behavior offers opportunities for tailoring degradation profiles and achieving specific release profiles upon application of a wide range of polymers with varied character. The designed polymer-based pigments exhibited a high ability to monitor calorimetrically the pH changes, especially in alkaline conditions. Overall, this study contributes to the broadening of the application of alizarin-based materials, paving the way for further exploration and development in the field of functional materials.

Antibiofilm Efficacy and Mechanism of the Marine Chlorinated Indole Sesquiterpene Against Methicillin-Resistant Staphylococcus aureus.

Methicillin-resistant Staphylococcus aureus (MRSA) can easily form biofilms on food surfaces, thus leading to cross-contamination, which is difficult to remove. Therefore, there is an urgent need to find alternatives with good antibacterial and antibiofilm effects. In this study, two indole sesquiterpene compounds, xiamycin (1) and chlorinated metabolite chloroxiamycin (2), were isolated from the fermentation liquid of marine Streptomyces sp. NBU3429 for the first time. The chemical structures of the two compounds were characterized by spectroscopic data interpretation, including 1D NMR and HRESIMS analysis. Antimicrobial test showed that chloroxiamycin (2) (minimum inhibitory concentration, MIC = 16 μg/mL) exhibited superior antibacterial activity than xiamycin (1) (MIC = 32 μg/mL) against MRSA ATCC43300. Moreover, compound (2) decreased the biofilm formation rate of MRSA ATCC43300 by 12.7%-84.6% in the concentration range of 32-512 μg/mL, which is relatively stronger than xiamycin (1) (4.1%-49.9%) as well. Antibacterial/antibiofilm mechanism investigation indicated that chloroxiamycin (2) could disrupt the cell wall and membrane of MRSA, inhibiting the production of biofilm extracellular polysaccharides. All these results illustrated that chloroxiamycin (2) is an effective antibacterial/antibiofilm agent, which makes it an attractive candidate for food preservatives.

Diastereoselective Synthesis of Sulfoxide-Functionalised N-Heterocyclic Carbene Ruthenium Complexes, Experimental and Computational Study.

The synthesis of sulfoxide-functionalized NHC ligand precursors were carried out by direct and mild oxidation from corresponding thioether precursors with high selectivity. A series of cationic [Ru(II)(η6-p-cymene)(NHC-SO)Cl]+ complexes were obtained in excellent yields by the classical Ag2O transmetallation route. NMR analyses suggested a chelate structure for the metal complexes, and X-ray diffractometry studies of 4 complexes unambiguously confirmed the preference for the bidentate (κ2-C,S) coordination mode of the NHC-SO ligands. Interestingly, only one diastereomer, in the form of an enantiomeric pair, was observed both in 1H NMR and in the solid state for the complexes. DFT calculations showed a possible intrinsic energy difference between the two pairs of diastereomers. The calculated energy barrierssuggested that inversion of the sulfoxide is only plausible from the higher energy diastereomer together with bulky substituents. Inverting the configuration at the Ru center instead shows a lower and accessible activation barrier to provide the most stable diastereomer through thermodynamic control, consistent with the observation of a single species by 1H NMR as a pair of enantiomers. All these complexes catalyse the β-alkylation of secondary alcohols.

A folding motif formed with an expanded genetic alphabet

AbstractAdding synthetic nucleotides to DNA increases the linear information density of DNA molecules. Here we report that it also can increase the diversity of their three-dimensional folds. Specifically, an additional nucleotide (dZ, with a 5-nitro-6-aminopyridone nucleobase), placed at twelve sites in a 23-nucleotides-long DNA strand, creates a fairly stable unimolecular structure (that is, the folded Z-motif, or fZ-motif) that melts at 66.5 °C at pH 8.5. Spectroscopic, gel and two-dimensional NMR analyses show that the folded Z-motif is held together by six reverse skinny dZ−:dZ base pairs, analogous to the crystal structure of the free heterocycle. Fluorescence tagging shows that the dZ−:dZ pairs join parallel strands in a four-stranded compact down–up–down–up fold. These have two possible structures: one with intercalated dZ−:dZ base pairs, the second without intercalation. The intercalated structure would resemble the i-motif formed by dC:dC+-reversed pairing at pH ≤ 6.5. This fZ-motif may therefore help DNA form compact structures needed for binding and catalysis.

EPS Production by Lacticaseibacillus casei Using Glycerol, Glucose, and Molasses as Carbon Sources.

This study demonstrates that Lactobacillus can produce exopolysaccharides (EPSs) using alternative carbon sources, such as sugarcane molasses and glycerol. After screening 22 strains of Lactobacillus to determine which achieved the highest production of EPS based on dry weight at 37 °C, the strain Ke8 (L. casei) was selected for new experiments. The EPS obtained using glycerol and glucose as carbon sources was classified as a heteropolysaccharide composed of glucose and mannose, containing 1730 g.mol-1, consisting of 39.4% carbohydrates and 18% proteins. The EPS obtained using molasses as the carbon source was characterized as a heteropolysaccharide composed of glucose, galactose, and arabinose, containing 1182 g.mol-1, consisting of 52.9% carbohydrates and 11.69% proteins. This molecule was characterized using Size Exclusion Chromatography (HPLC), Gas chromatography-mass spectrometry (GC-MS), Fourier-transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance spectroscopy (1H-NMR). The existence of polysaccharides was confirmed via FT-IR and NMR analyses. The results obtained suggest that Lacticaseibacillus casei can grow in media that use alternative carbon sources such as glycerol and molasses. These agro-industry residues are inexpensive, and their use contributes to sustainability. The lack of studies regarding the use of Lacticaseibacillus casei for the production of EPS using renewable carbon sources from agroindustry should be noted.

Two Novel Diterpenoid Alkaloids from Aconitum pendulum.

Two previously uncharacterized compounds, an aconitine-type C19-diterpenoid alkaloid (1) and a napelline-type diterpenoid alkaloid C20-diterpenoid alkaloid (2), as well as ten known compounds (3-12), were isolated from Aconitum pendulum. Their structures were elucidated based on spectroscopic data, including 1D and 2D NMR, IR, HR-ESI-MS, and single-crystal X-ray diffraction analysis. The anti-insecticidal activities of these compounds were evaluated by contact toxicity tests against two-spotted spider mites, and compounds 1, 2, and 9 showed moderate contact toxicity, with LC50 values of 0.86±0.09, 0.95±0.23, and 0.89±0.19 mg/mL, respectively. This study highlights the potential use of diterpenoid alkaloids as natural plant-derived pesticides for the management of plant pests.

Novel compounds isolated from health food products containing beni-koji (red yeast rice) with adverse event reports.

Recently, health hazards, such as kidney damage, have been reported owing to the ingestion of a health food product, so-called "foods with functional claims (FFC)'', containing beni-koji (red yeast rice). Although not an expected compound in the FFC, the detection of puberulic acid has also been reported. Further investigations of these health food products, such as the identification of other unintended compounds and clarifying the health impacts of puberulic acid, are required. To clarify the causes of these health issues, we investigated the presence of unintended compounds in the FFC containing beni-koji using comprehensive instrumental analyses. Using differential analysis, novel compounds 1 and 2 were detected as unexpected components between the samples with and without adverse event reports. Although limited to the samples available for analyses in this study, both compounds 1 and 2 were detected in all the samples that also contained puberulic acid. Compounds 1 and 2, with molecular formulas of C23H34O7 and C28H42O8, respectively, may be lovastatin derivatives. Their structures were confirmed using NMR analyses and are novel natural compounds. For definitive confirmation, we are in the process of synthesizing compounds 1 and 2 from lovastatin. The route of contamination of these compounds are currently under investigation. The findings of this study could be used to address the growing health hazards associated with health food products.

In Silico Design and in Vitro Assessment of Bicyclic Trifluoromethylated Pyrroles as New Antibacterial and Antifungal Agents.

QSAR studies on the number of compounds tested as S. aureus inhibitors were performed using an interactive Online Chemical Database and Modeling Environment (OCHEM) web platform. The predictive ability of the developed consensus QSAR model was q2 = 0.79 ± 0.02. The consensus prediction for the external evaluation set afforded high predictive power (q2 = 0.82 ± 0.03). The models were applied to screen a virtual chemical library with anti-S. aureus activity. Six promising new bicyclic trifluoromethylated pyrroles were identified, synthesized and evaluated in vitro against S. aureus, E. coli, and A. baumannii for their antibacterial activity and against C. albicans, C. krusei and C. glabrata for their antifungal activity. The synthesized compounds were characterized by 1H, 19F, and 13C NMR and elemental analysis. The antimicrobial activity assessment indicated that trifluoromethylated pyrroles 9 and 11 demonstrated the greatest antibacterial and antifungal effects against all the tested pathogens, especially against multidrug-resistant strains. The acute toxicity of the compounds to Daphnia magna ranged from 1.21 to 33.39 mg/L (moderately and slightly toxic). Based on the docking results, it can be suggested that the antibacterial and antifungal effects of the compounds can be explained by the inhibition of bacterial wall component synthesis.

Retrospective determination of exposure temperature of standing trees during wildfires with solid-state NMR

Timber plantations across the world are suffering from the effects of increasingly frequent wildfires, which potentially degrade the wood of affected trees, depending on the exposure temperature and time. However, it is rather complicated to determine the exact temperature of the fire, or the temperature to which the wood was exposed. This study aimed to determine the exposure temperature of wood retrospectively through solid-state NMR analysis. Models were developed from softwood and hardwood samples exposed to defined temperatures, which successfully linked the NMR signal to the exposure temperature. Various fit equations were developed to link the half-width or peak area of the NMR signal to the exposure temperatures. Hard- and softwoods displayed noticeable differences: a linear function best described the half-width in the higher temperature region for Pine and Eucalyptus, whereas a parabolic function for the peak area of Eucalyptus yielded the best correlation to the entire temperature range. This non-destructive and direct method offers a valuable evaluation method to determine, if wood in burnt trees is degraded and can be processed. An informed choice can be made on the decision to use, or discard burnt wood.

Quantum Mechanical Quantitative Nuclear Magnetic Resonance Enables Digital Reference Standards at All Magnetic Fields and Enhances qNMR Sustainability.

Quantum mechanics (QM)-driven 1H iterative functionalized spin analysis produces HifSA profiles, which encode the complete 1H spin parameters ("nuclear genotype") of analytes of interest. HifSA profiles enable the establishment of digital reference standards (dRS) that are portable, FAIR (findable - accessible - interoperable - reusable), and fit for the purpose of quantitative 1H NMR (qHNMR) analysis at any magnetic field. This approach enhances the sustainability of analytical standards. Moreover, the analyte-specific complete chemical shift and J-coupling information in HifSA-based dRS enable computational quantitation of substances in mixtures via QM-total-line-shape fitting (QM-qHNMR). We present the proof of concept for HifSA-based dRS by resolving the highly overlapping NMR resonances in the experimental spectra ("nuclear phenotypes") of the diastereomeric mixture of (2RS, 4RS)- and (2RS, 4SR)-difenoconazole (DFZ), a widely used antifouling food additive. The underlying 1H spin parameters are highly conserved in various solvents, are robust against variation in measurement temperature, and work across a wide range of magnetic fields. QM-qHNMR analysis of DFZ samples at 80, 400, 600, and 800 MHz showed high congruence with metrological reference values. Furthermore, this study introduces QM-qHNMR combined with chiral shift reagents for the analysis of all four DFZ stereoisomers: (2R, 4R)-, (2S, 4S)-, (2R, 4S)-, and (2S, 4R)-DFZ to perform chiral qHNMR measurements.

The Impact of Different Catalysts on Heterogeneous Hydrogenation of Hydroxyl‐Terminated Polybutadiene

AbstractHydroxyl‐terminated polybutadiene (HTPB) is hydrogenated using catalytic hydrogenation with HTPB as a precursor using various catalysts. The hydrogenation is carried out using iso‐propyl alcohol (IPA) and toluene as an active solvent media. The present paper used (a) charcoal, (b) palladium supported by charcoal (Pd−C), (c) palladium supported by zirconium oxide (Pd‐ZrO2), and (d) copper chromite (CC) as catalysts for hydrogenation of HTPB to study the influence on the degree of hydrogenation with respect to each catalyst. The experimental data shows that hydrogenated HTPB (HHTPB) formation is predominantly controlled by physisorption and chemical reaction with a catalyst. Various techniques like NMR, FTIR and chemical analysis are used to characterize HTPB and HHTPB. Degree of hydrogenation of HTPB is found to be higher with copper chromite when compared to other catalysts in this work. Post‐hydrogenation, no significant change in hydroxyl value and a marginal increase in molecular weight is noticed with all catalysts. HTPB and HHTPB samples are analyzed using FTIR, 1H‐NMR, and 13C‐NMR and TG‐DSC studies, and inferences are derived with respect to the change in the olefinic region, microstructural changes, molecular weight, and thermal decomposition characteristics.