Nitrogenase Proteins Research Articles

Anaerobic cryoEM protocols for air-sensitive nitrogenase proteins.

Single-particle cryo-electron microscopy (cryoEM) provides an attractive avenue for advancing our atomic resolution understanding of materials, molecules and living systems. However, the vast majority of published cryoEM methodologies focus on the characterization of aerobically purified samples. Air-sensitive enzymes and microorganisms represent important yet understudied systems in structural biology. We have recently demonstrated the success of an anaerobic single-particle cryoEM workflow applied to the air-sensitive nitrogenase enzymes. In this protocol, we detail the use of Schlenk lines and anaerobic chambers to prepare samples, including a protein tag for monitoring sample exposure to oxygen in air. We describe how to use a plunge freezing apparatus inside of a soft-sided vinyl chamber of the type we routinely use for anaerobic biochemistry and crystallography of oxygen-sensitive proteins. Manual control of the airlock allows for introduction of liquid cryogens into the tent. A custom vacuum port provides slow, continuous evacuation of the tent atmosphere to avoid accumulation of flammable vapors within the enclosed chamber. These methods allowed us to obtain high-resolution structures of both nitrogenase proteins using single-particle cryoEM. The procedures involved can be generally subdivided into a 4 d anaerobic sample generation procedure, and a 1 d anaerobic cryoEM sample preparation step, followed by conventional cryoEM imaging and processing steps. As nitrogen is a substrate for nitrogenase, the Schlenk lines and anaerobic chambers described in this procedure are operated under an argon atmosphere; however, the system and these procedures are compatible with other controlled gas environments.

Emergence of an Orphan Nitrogenase Protein Following Atmospheric Oxygenation.

Molecular innovations within key metabolisms can have profound impacts on element cycling and ecological distribution. Yet, much of the molecular foundations of early evolved enzymes and metabolisms are unknown. Here, we bring one such mystery to relief by probing the birth and evolution of the G-subunit protein, an integral component of certain members of the nitrogenase family, the only enzymes capable of biological nitrogen fixation. The G-subunit is a Paleoproterozoic-age orphan protein that appears more than 1 billion years after the origin of nitrogenases. We show that the G-subunit arose with novel nitrogenase metal dependence and the ecological expansion of nitrogen-fixing microbes following the transition in environmental metal availabilities and atmospheric oxygenation that began ∼2.5 billion years ago. We identify molecular features that suggest early G-subunit proteins mediated cofactor or protein interactions required for novel metal dependency, priming ancient nitrogenases and their hosts to exploit these newly diversified geochemical environments. We further examined the degree of functional specialization in G-subunit evolution with extant and ancestral homologs using laboratory reconstruction experiments. Our results indicate that permanent recruitment of the orphan protein depended on the prior establishment of conserved molecular features and showcase how contingent evolutionary novelties might shape ecologically important microbial innovations.

Low-temperature trapping of N2 reduction reaction intermediates in nitrogenase MoFe protein-CdS quantum dot complexes.

The biological reduction of N2 to ammonia requires the ATP-dependent, sequential delivery of electrons from the Fe protein to the MoFe protein of nitrogenase. It has been demonstrated that CdS nanocrystals can replace the Fe protein to deliver photoexcited electrons to the MoFe protein. Herein, light-activated electron delivery within the CdS:MoFe protein complex was achieved in the frozen state, revealing that all the electron paramagnetic resonance (EPR) active E-state intermediates in the catalytic cycle can be trapped and characterized by EPR spectroscopy. Prior to illumination, the CdS:MoFe protein complex EPR spectrum was composed of a S = 3/2 rhombic signal (g = 4.33, 3.63, and 2.01) consistent with the FeMo-cofactor in the resting state, E0. Illumination for sequential 1-h periods at 233K under 1 atm of N2 led to a cumulative attenuation of E0 by 75%. This coincided with the appearance of S = 3/2 and S = 1/2 signals assigned to two-electron (E2) and four-electron (E4) reduced states of the FeMo-cofactor, together with additional S = 1/2 signals consistent with the formation of E6 and E8 states. Simulations of EPR spectra allowed quantification of the different E-state populations, along with mapping of these populations onto the Lowe-Thorneley kinetic scheme. The outcome of this work demonstrates that the photochemical delivery of electrons to the MoFe protein can be used to populate all of the EPR active E-state intermediates of the nitrogenase MoFe protein cycle.

Regulatory response to a hybrid ancestral nitrogenase in Azotobacter vinelandii.

Biological nitrogen fixation, the microbial reduction of atmospheric nitrogen to bioavailable ammonia, represents both a major limitation on biological productivity and a highly desirable engineering target for synthetic biology. However, the engineering of nitrogen fixation requires an integrated understanding of how the gene regulatory dynamics of host diazotrophs respond across sequence-function space of its central catalytic metalloenzyme, nitrogenase. Here, we interrogate this relationship by analyzing the transcriptome of Azotobacter vinelandii engineered with a phylogenetically inferred ancestral nitrogenase protein variant. The engineered strain exhibits reduced cellular nitrogenase activity but recovers wild-type growth rates following an extended lag period. We find that expression of genes within the immediate nitrogen fixation network is resilient to the introduced nitrogenase sequence-level perturbations. Rather the sustained physiological compatibility with the ancestral nitrogenase variant is accompanied by reduced expression of genes that support trace metal and electron resource allocation to nitrogenase. Our results spotlight gene expression changes in cellular processes adjacent to nitrogen fixation as productive engineering considerations to improve compatibility between remodeled nitrogenase proteins and engineered host diazotrophs. IMPORTANCE Azotobacter vinelandii is a key model bacterium for the study of biological nitrogen fixation, an important metabolic process catalyzed by nitrogenase enzymes. Here, we demonstrate that compatibilities between engineered A. vinelandii strains and nitrogenase variants can be modulated at the regulatory level. The engineered strain studied here responds by adjusting the expression of proteins involved in cellular processes adjacent to nitrogen fixation, rather than that of nitrogenase proteins themselves. These insights can inform future strategies to transfer nitrogenase variants to non-native hosts.

Electrochemical experiments define potentials associated with binding of substrates and inhibitors to nitrogenase MoFe protein.

Nitrogenases catalyse the 6-electron reduction of dinitrogen to ammonia, passing through a series of redox and protonation levels during catalytic substrate reduction. The molybdenum-iron nitrogenase is the most well-studied, but redox potentials associated with proton-coupled transformations between the redox levels of the catalytic MoFe protein have proved difficult to pin down, in part due to a complex electron-transfer pathway from the partner Fe protein, linked to ATP-hydrolysis. Here, we apply electrochemical control to the MoFe protein of Azotobacter vinelandii nitrogenase, using europium(III/II)-ligand couples as low potential redox mediators. We combine insight from the electrochemical current response with data from gas chromatography and in situ infrared spectroscopy, in order to define potentials for the binding of a series of inhibitors (carbon monoxide, methyl isocyanide) to the metallo-catalytic site of the MoFe protein, and the onset of catalytic transformation of alternative substrates (protons and acetylene) by the enzyme. Thus, we associate potentials with the redox levels for inhibition and catalysis by nitrogenase, with relevance to the elusive mechanism of biological nitrogen fixation.

Nitrogenase Fe Protein: A Multi-Tasking Player in Substrate Reduction and Metallocluster Assembly.

The Fe protein of nitrogenase plays multiple roles in substrate reduction and metallocluster assembly. Best known for its function to transfer electrons to its catalytic partner during nitrogenase catalysis, the Fe protein is also a key player in the biosynthesis of the complex metalloclusters of nitrogenase. In addition, it can function as a reductase on its own and affect the ambient reduction of CO2 or CO to hydrocarbons. This review will provide an overview of the properties and functions of the Fe protein, highlighting the relevance of this unique FeS enzyme to areas related to the catalysis, biosynthesis, and applications of the fascinating nitrogenase system.

A directed genome evolution method to enhance hydrogen production in Rhodobacter capsulatus.

Nitrogenase-dependent H2 production by photosynthetic bacteria, such as Rhodobacter capsulatus, has been extensively investigated. An important limitation to increase H2 production using genetic manipulation is the scarcity of high-throughput screening methods to detect possible overproducing mutants. Previously, we engineered R. capsulatus strains that emitted fluorescence in response to H2 and used them to identify mutations in the nitrogenase Fe protein leading to H2 overproduction. Here, we used ultraviolet light to induce random mutations in the genome of the engineered H2-sensing strain, and fluorescent-activated cell sorting to detect and isolate the H2-overproducing cells from libraries containing 5 × 105 mutants. Three rounds of mutagenesis and strain selection gradually increased H2 production up to 3-fold. The whole genomes of five H2 overproducing strains were sequenced and compared to that of the parental sensor strain to determine the basis for H2 overproduction. No mutations were present in well-characterized functions related to nitrogen fixation, except for the transcriptional activator nifA2. However, several mutations mapped to energy-generating systems and to carbon metabolism-related functions, which could feed reducing power or ATP to nitrogenase. Time-course experiments of nitrogenase depression in batch cultures exposed mismatches between nitrogenase protein levels and their H2 and ethylene production activities that suggested energy limitation. Consistently, cultivating in a chemostat produced up to 19-fold more H2 than the corresponding batch cultures, revealing the potential of selected H2 overproducing strains.

A colorimetric method to measure in vitro nitrogenase functionality for engineering nitrogen fixation

Biological nitrogen fixation (BNF) is the reduction of N2 into NH3 in a group of prokaryotes by an extremely O2-sensitive protein complex called nitrogenase. Transfer of the BNF pathway directly into plants, rather than by association with microorganisms, could generate crops that are less dependent on synthetic nitrogen fertilizers and increase agricultural productivity and sustainability. In the laboratory, nitrogenase activity is commonly determined by measuring ethylene produced from the nitrogenase-dependent reduction of acetylene (ARA) using a gas chromatograph. The ARA is not well suited for analysis of large sample sets nor easily adapted to automated robotic determination of nitrogenase activities. Here, we show that a reduced sulfonated viologen derivative (S2Vred) assay can replace the ARA for simultaneous analysis of isolated nitrogenase proteins using a microplate reader. We used the S2Vred to screen a library of NifH nitrogenase components targeted to mitochondria in yeast. Two NifH proteins presented properties of great interest for engineering of nitrogen fixation in plants, namely NifM independency, to reduce the number of genes to be transferred to the eukaryotic host; and O2 resistance, to expand the half-life of NifH iron-sulfur cluster in a eukaryotic cell. This study established that NifH from Dehalococcoides ethenogenes did not require NifM for solubility, [Fe-S] cluster occupancy or functionality, and that NifH from Geobacter sulfurreducens was more resistant to O2 exposure than the other NifH proteins tested. It demonstrates that nitrogenase components with specific biochemical properties such as a wider range of O2 tolerance exist in Nature, and that their identification should be an area of focus for the engineering of nitrogen-fixing crops.

The Kinetics of Electron Transfer from CdS Nanorods to the MoFe Protein of Nitrogenase

Combining the remarkable catalytic properties of redox enzymes with highly tunable light absorbing properties of semiconductor nanocrystals enables the light-driven catalysis of complex, multielectron redox reactions. This Article focuses on systems that combine CdS nanorods (NRs) with the MoFe protein of nitrogenase to drive photochemical N2 reduction. We used transient absorption spectroscopy (TAS) to examine the kinetics of electron transfer (ET) from CdS NRs to the MoFe protein. For CdS NRs with dimensions similar to those previously used for photochemical N2 reduction, the rate constant for ET from CdS NRs competes with other electron relaxation processes, such that when a MoFe protein is bound to a NR, about one-half of the photoexcited electrons are delivered to the enzyme. The NR–MoFe protein binding is incomplete with more than one-half of the NRs in solution not having a MoFe protein bound to accept electrons. The quantum efficiency of ET (QEET) in these ensemble samples is similar to previously reported efficiencies of product (NH3 and H2) formation, suggesting that the enzyme utilizes the delivered electrons without major loss pathways. Our analysis suggests that QEET, and therefore the photochemical product formation, is limited at the ensemble level by the NR–MoFe protein binding and at the single-complex level by the competitiveness of ET. We characterized ET kinetics for several CdS NRs samples with varying dimensions and found that for CdS NRs with an average diameter of 4.2 nm the ET efficiency dropped to undetectable levels, defining a maximum NR diameter that should be used to photochemically drive the MoFe protein. The work described here provides insights into the design of systems with increased control of photochemical N2 reduction catalyzed by the MoFe protein of nitrogenase.

Characterization of a Nitrogenase Iron Protein Substituted with a Synthetic [Fe4Se4] Cluster

AbstractThe Fe protein of nitrogenase plays multiple roles in substrate reduction and cluster maturation via its redox‐active [Fe4S4] cluster. Here we report the synthesis and characterization of a water‐soluble [Fe4Se4] cluster that is used to substitute the [Fe4S4] cluster of the Azotobacter vinelandii Fe protein (AvNifH). Biochemical, EPR and XAS/EXAFS analyses demonstrate the ability of the [Fe4Se4] cluster to adopt the super‐reduced, all‐ferrous state upon its incorporation into AvNifH. Moreover, these studies reveal that the [Fe4Se4] cluster in AvNifH already assumes a partial all‐ferrous state ([Fe4Se4]0) in the presence of dithionite, where its [Fe4S4] counterpart in AvNifH exists solely in the reduced state ([Fe4S4]1+). Such a discrepancy in the redox properties of the AvNifH‐associated [Fe4Se4] and [Fe4S4] clusters can be used to distinguish the differential redox requirements for the substrate reduction and cluster maturation of nitrogenase, pointing to the utility of chalcogen‐substituted FeS clusters in future mechanistic studies of nitrogenase catalysis and assembly.

Characterization of a Nitrogenase Iron Protein Substituted with a Synthetic [Fe4 Se4 ] Cluster.

The Fe protein of nitrogenase plays multiple roles in substrate reduction and cluster maturation via its redox-active [Fe4 S4 ] cluster. Here we report the synthesis and characterization of a water-soluble [Fe4 Se4 ] cluster that is used to substitute the [Fe4 S4 ] cluster of the Azotobacter vinelandii Fe protein (AvNifH). Biochemical, EPR and XAS/EXAFS analyses demonstrate the ability of the [Fe4 Se4 ] cluster to adopt the super-reduced, all-ferrous state upon its incorporation into AvNifH. Moreover, these studies reveal that the [Fe4 Se4 ] cluster in AvNifH already assumes a partial all-ferrous state ([Fe4 Se4 ]0 ) in the presence of dithionite, where its [Fe4 S4 ] counterpart in AvNifH exists solely in the reduced state ([Fe4 S4 ]1+ ). Such a discrepancy in the redox properties of the AvNifH-associated [Fe4 Se4 ] and [Fe4 S4 ] clusters can be used to distinguish the differential redox requirements for the substrate reduction and cluster maturation of nitrogenase, pointing to the utility of chalcogen-substituted FeS clusters in future mechanistic studies of nitrogenase catalysis and assembly.

Expression of Alternative Nitrogenases in Rhodopseudomonas palustris Is Enhanced Using an Optimized Genetic Toolset for Rapid, Markerless Modifications.

The phototrophic bacterium Rhodopseudomonas palustris is emerging as a promising biotechnological chassis organism, due to its resilience to a range of harsh conditions, a wide metabolic repertoire, and the ability to quickly regenerate ATP using light. However, realization of this promise is impeded by a lack of efficient, rapid methods for genetic modification. Here, we present optimized tools for generating chromosomal insertions and deletions employing electroporation as a means of transformation. Generation of markerless strains can be completed in 12 days, approximately half the time for previous conjugation-based methods. This system was used for overexpression of alternative nitrogenase isozymes with the aim of improving biohydrogen productivity. Insertion of the pucBa promoter upstream of vnf and anf nitrogenase operons drove robust overexpression up to 4000-fold higher than wild-type. Transcript quantification was facilitated by an optimized high-quality RNA extraction protocol employing lysis using detergent and heat. Overexpression resulted in increased nitrogenase protein levels, extending to superior hydrogen productivity in bioreactor studies under nongrowing conditions, where promoter-modified strains better utilized the favorable energy state created by reduced competition from cell division. Robust heterologous expression driven by the pucBa promoter is thus attractive for energy-intensive biosyntheses suited to the capabilities of R.palustris. Development of this genetic modification toolset will accelerate the advancement of R.palustris as a biotechnological chassis organism, and insights into the effects of nitrogenase overexpression will guide future efforts in engineering strains for improved hydrogen production.

(Invited) ATP-Independent Electroenzymatic Ammonia Production Using an Organic Redox Polymer-Immobilized Enzymatic System

Consuming approximately 1% of the total fossil fuel of the world, the ammonia (NH3), a usable form to living organisms is produced by dinitrogen (N2) fixation. Currently, approximately 66% of NH3 is produced by the Haber–Bosch process using an iron catalyst with N2 and H2 at high temperatures and high pressures (400 °C and 20 MPa), which are estimated to be responsible for approximately 3% of CO2 emissions.1,2 As an alternative strategy, bioelectrosynthetic technique is studied for eco-friendly ammonia production using the nitrogenase, the only enzyme able to reduce N2 to NH3 at room temperature, neutral pH and ambient pressure. For the practical use of nitrogenase bioelectrocatalysis technology, it is indispensable to minimize the large input of chemical energy for the reduction of MoFe protein component of nitrogenase by hydrolysis of two ATP for each electron transferred (16 ATP per N2).3-5 Therefore, we have concentrated on approaches to bypass the reducing- and ATP-hydrolyzing properties of the dinitrogenase reductase by immobilizing the catalytic protein of nitrogenase, MoFe protein, on the electrode surface. One way to directly reduce the MoFe protein is a use of a redox polymer having thermodynamically strong reducing capability. Redox polymer immobilized bioelectrocatalysis facilitates an efficient electron transfer through self-exchange based conduction due to a high effective concentration of catalysts at the electrode surface and more efficient mediation. However, none of the previously reported redox polymers were capable of immobilized bioelectrocatalysis using nitrogenase.6-9 Thus, we report the MoFe nitrogenase immobilized at an electrode surface with a neutral red redox polymer which is used to reduce the MoFe protein (as mediator able to transfer the electrons to the MoFe independent of the Fe protein and of ATP hydrolysis) and support the mediated bioelectrocatalysis of N3 -, NO2 - and N2 to NH3 catalyzed by the MoFe protein. Representative Bulk bioelectrosynthetic experiments produced 209 ± 30 nmol NH3 nmol MoFe-1 h-1 from N2 reduction. 15N2 labeling experiments and NMR analysis were performed to confirm biosynthetic N2 reduction to NH3 . Reference K. Burgess and D. J. Lowe, Chem. Rev., 1996, 96, 2983–3012.Christiansen, D. R. Dean and L. C. Seefeldt, Annu. Rev. Plant Physiol. Plant Mol. Biol., 2001, 52, 269–295.E. Smith, Science, 2002, 297, 1654–1655.-Y. Yang, K. Danyal and L. C. Seefeldt, in Nitrogen Fixation, Methods in Molecular Biology 766, ed. M. W. Ribbe, Springer, New York, 2011, ch. 2. Milton, R. D.; Abdellaoui, S.; Khadka, N.; Dean, D. R.; Leech, D.; Seefeldt, L. C.; Minteer, S. D.Energy Environ. Sci., 2016, 9, 2550– 2554Hickey, D. P.,Cai, R., Yang, Z. Y., Grunau, K., Einsle, O., Seefeldt, L. C., Minteer, S. D., Am. Chem. Soc., 2019, 141, 17150– 17157Ackermann, D. A. Guschin, K. Eckhard, S. Shleev, W. Schuhmann, Electrochem Comm., 2010, 12, 640-643.Barrière, Y. Ferry, D. Rochefort, D. Leech, Electrochem Comm., 2004, 6, 237-241Yuan, S. D. Minteer, Curr. Opin. Electrochem., 2019, 15, 1-6

Probing Physical Oxidation State by Resonant X-ray Emission Spectroscopy: Applications to Iron Model Complexes and Nitrogenase.

The ability of resonant X‐ray emission spectroscopy (XES) to recover physical oxidation state information, which may often be ambiguous in conventional X‐ray spectroscopy, is demonstrated. By combining Kβ XES with resonant excitation in the XAS pre‐edge region, resonant Kβ XES (or 1s3p RXES) data are obtained, which probe the 3dn+1 final‐state configuration. Comparison of the non‐resonant and resonant XES for a series of high‐spin ferrous and ferric complexes shows that oxidation state assignments that were previously unclear are now easily made. The present study spans iron tetrachlorides, iron sulfur clusters, and the MoFe protein of nitrogenase. While 1s3p RXES studies have previously been reported, to our knowledge, 1s3p RXES has not been previously utilized to resolve questions of metal valency in highly covalent systems. As such, the approach presented herein provides chemists with means to more rigorously and quantitatively address challenging electronic‐structure questions.

Probing Physical Oxidation State by Resonant X‐ray Emission Spectroscopy: Applications to Iron Model Complexes and Nitrogenase

AbstractThe ability of resonant X‐ray emission spectroscopy (XES) to recover physical oxidation state information, which may often be ambiguous in conventional X‐ray spectroscopy, is demonstrated. By combining Kβ XES with resonant excitation in the XAS pre‐edge region, resonant Kβ XES (or 1s3p RXES) data are obtained, which probe the 3dn+1 final‐state configuration. Comparison of the non‐resonant and resonant XES for a series of high‐spin ferrous and ferric complexes shows that oxidation state assignments that were previously unclear are now easily made. The present study spans iron tetrachlorides, iron sulfur clusters, and the MoFe protein of nitrogenase. While 1s3p RXES studies have previously been reported, to our knowledge, 1s3p RXES has not been previously utilized to resolve questions of metal valency in highly covalent systems. As such, the approach presented herein provides chemists with means to more rigorously and quantitatively address challenging electronic‐structure questions.

Probing the All-Ferrous States of Methanogen Nitrogenase Iron Proteins.

The Fe protein of nitrogenase reduces two C1 substrates, CO2 and CO, under ambient conditions when its [Fe4S4] cluster adopts the all-ferrous [Fe4S4]0 state. Here, we show disparate reactivities of the nifH- and vnf-encoded Fe proteins from Methanosarcina acetivorans (designated MaNifH and MaVnfH) toward C1 substrates in the all-ferrous state, with the former capable of reducing both CO2 and CO to hydrocarbons, and the latter only capable of reducing CO to hydrocarbons at substantially reduced yields. EPR experiments conducted at varying solution potentials reveal that MaVnfH adopts the all-ferrous state at a more positive reduction potential than MaNifH, which could account for the weaker reactivity of the MaVnfH toward C1 substrates than MaNifH. More importantly, MaVnfH already displays the g = 16.4 parallel-mode EPR signal that is characteristic of the all-ferrous [Fe4S4]0 cluster at a reduction potential of −0.44 V, and the signal reaches 50% maximum intensity at a reduction potential of −0.59 V, suggesting the possibility of this Fe protein to access the all-ferrous [Fe4S4]0 state under physiological conditions. These results bear significant relevance to the long-lasting debate of whether the Fe protein can utilize the [Fe4S4]0/2+ redox couple to support a two-electron transfer during substrate turnover which, therefore, is crucial for expanding our knowledge of the reaction mechanism of nitrogenase and the cellular energetics of nitrogenase-based processes.

A Synthetic Biology Workflow Reveals Variation in Processing and Solubility of Nitrogenase Proteins Targeted to Plant Mitochondria, and Differing Tolerance of Targeting Sequences in a Bacterial Nitrogenase Assay.

While industrial nitrogen fertilizer is intrinsic to modern agriculture, it is expensive and environmentally harmful. One approach to reduce fertilizer usage is to engineer the bacterial nitrogenase enzyme complex within plant mitochondria, a location that may support enzyme function. Our current strategy involves fusing a mitochondrial targeting peptide (MTP) to nitrogenase (Nif) proteins, enabling their import to the mitochondrial matrix. However, the process of import modifies the N-terminus of each Nif protein and may impact nitrogenase assembly and function. Here we present our workflow assessing the mitochondrial processing, solubility and relative abundance of 16 Klebsiella oxytoca Nif proteins targeted to the mitochondrial matrix in Nicotiana benthamiana leaf. We found that processing and abundance of MTP::Nif proteins varied considerably, despite using the same constitutive promoter and MTP across all Nif proteins tested. Assessment of the solubility for all MTP::Nif proteins when targeted to plant mitochondria found NifF, M, N, S, U, W, X, Y, and Z were soluble, while NifB, E, H, J, K, Q, and V were mostly insoluble. The functional consequence of the N-terminal modifications required for mitochondrial targeting of Nif proteins was tested using a bacterial nitrogenase assay. With the exception of NifM, the Nif proteins generally tolerated the N-terminal extension. Proteomic analysis of Nif proteins expressed in bacteria found that the relative abundance of NifM with an N-terminal extension was increased ~50-fold, while that of the other Nif proteins was not influenced by the N-terminal extension. Based on the solubility, processing and functional assessments, our workflow identified that K. oxytoca NifF, N, S, U, W, Y, and Z successfully met these criteria. For the remaining Nif proteins, their limitations will need to be addressed before proceeding towards assembly of a complete set of plant-ready Nif proteins for reconstituting nitrogenase in plant mitochondria.

Quantum Mechanics/Molecular Mechanics Study of Resting-State Vanadium Nitrogenase: Molecular and Electronic Structure of the Iron-Vanadium Cofactor.

The nitrogenase enzymes are responsible for all biological nitrogen reduction. How this is accomplished at the atomic level, however, has still not been established. The molybdenum-dependent nitrogenase has been extensively studied and is the most active catalyst for dinitrogen reduction of the nitrogenase enzymes. The vanadium-dependent form, on the other hand, displays different reactivity, being capable of CO and CO2 reduction to hydrocarbons. Only recently did a crystal structure of the VFe protein of vanadium nitrogenase become available, paving the way for detailed theoretical studies of the iron–vanadium cofactor (FeVco) within the protein matrix. The crystal structure revealed a bridging 4-atom ligand between two Fe atoms, proposed to be either a CO32– or NO3– ligand. Using a quantum mechanics/molecular mechanics model of the VFe protein, starting from the 1.35 Å crystal structure, we have systematically explored multiple computational models for FeVco, considering either a CO32– or NO3– ligand, three different redox states, and multiple broken-symmetry states. We find that only a [VFe7S8C(CO3)]2– model for FeVco reproduces the crystal structure of FeVco well, as seen in a comparison of the Fe–Fe and V–Fe distances in the computed models. Furthermore, a broken-symmetry solution with Fe2, Fe3, and Fe5 spin-down (BS7-235) is energetically preferred. The electronic structure of the [VFe7S8C(CO3)]2– BS7-235 model is compared to our [MoFe7S9C]− BS7-235 model of FeMoco via localized orbital analysis and is discussed in terms of local oxidation states and different degrees of delocalization. As previously found from Fe X-ray absorption spectroscopy studies, the Fe part of FeVco is reduced compared to FeMoco, and the calculations reveal Fe5 as locally ferrous. This suggests resting-state FeVco to be analogous to an unprotonated E1 state of FeMoco. Furthermore, V–Fe interactions in FeVco are not as strong compared to Mo–Fe interactions in FeMoco. These clear differences in the electronic structures of otherwise similar cofactors suggest an explanation for distinct differences in reactivity.

The Degradation of Glyphosate and Its Effect on the Microbial Community of Agro-Sod–Podzolic Soil under Short-Term Model Experiment Conditions

Under laboratory conditions, the decomposition of glyphosate with the formation of aminomethylphosphonic acid (AMPA) and its effect on the total abundance of bacteria and fungi as well as the number of copies of genes encoding the enzymes C–P lyase of α-proteobacteria (phnJ), acid and alkaline phosphatase (phoC and phoD) and Fe protein of nitrogenase (nifH) in agro-sod-podzolic soil (Epialbic Retisol) were determined. It was shown that when applying glyphosate in recommended doses (5–10 mg/kg), only 5–7% of the introduced herbicide were detected after 14 days, but when the dose was increased to 100 mg/kg, this value increased up to 23%. Decreasing the rate of the herbicide degradation was observed only during the first week of incubation and was accompanied by a decrease in the number of copies of the phoC, phoD, and nifH genes and an increase in the abundance of fungi. The obtained results indicate that glyphosate was mainly degraded by means of C–P bond breaking and the formation of phosphates, and also suggest possible inhibition of the nitrogen fixation process. It is shown that at an application dose of glyphosate of 100 mg/kg may lead to the accumulation of AMPA, the first metabolite of the herbicide degradation pathway, formed after the C–N bond break. Bioassay using wheat showed that when applying glyphosate at a dose of 100 mg/kg, an inhibition of plant development was observed: the length of the roots and the biomass of the shoots reduced by 60 and 20% compared to the control, respectively. Based on the data obtained, it was proposed to use the reduction in the content of copies of the phoC gene and the increase in the number of copies of ITS rRNA as indicators of the predominant decomposition of glyphosate through the sarcosine pathway. The decrease in the number of copies of ITS rRNA gene by 40% or more can be used as an indicator of the possibility of AMPA accumulation during glyphosate degradation.

Nitrogenase Bioelectrocatalysis: ATP-Independent Ammonia Production Using a Redox Polymer/MoFe Protein System

Nitrogenase is the only biological catalyst that is known to be able to convert nitrogen gas to ammonia. In microorganisms, the MoFe catalytic protein of nitrogenase is reduced by a transient Fe pr...