Nitrogen Partial Factor Productivity Research Articles

Vertical Non-uniform Distribution of Soil Salinity Enhances Nitrogen Utilization Efficiency and Influences δ15N Distribution in Tomato Plants

Soil salinity typically exhibits non-uniform distribution in the natural environment. However, how vertically non-uniform distribution of soil salinity in the root zone (VNDSR) regulated plant nitrogen metabolism is still largely elusive. This study aimed to investigate the impact of VNDSR on leaf Malondialdehyde (MDA) content, upper and lower root activity, leaf Na+/Ca2+ and Na+/K+, various tomato organs’ nitrogen concentration (%) and natural abundance of nitrogen isotopes (δ15N,‰), and nitrogen utilization efficiency of tomato plants. Four treatments were established, including the upper layer of the root zone having soil salinity levels of 1‰, 1‰, 2‰, and 3‰, while the corresponding lower layer of the root zone had soil salinity levels of 1‰, 5‰, 4‰, and 3‰, respectively, denoted as T1:1, T1:5, T2:4, and T3:3. The results showed that under the same average soil salinity conditions and compared to the treatment with uniform soil salinity distribution in the root zone (T3:3), the VNDSR treatment (T1:5) significantly reduced leaf MDA content (p < 0.01), Na+/Ca2+ (p < 0.01) and Na+/K+ (p < 0.01), and stem δ15N values (p < 0.05). Moreover, the VNDSR treatment (T1:5) significantly increased the ratio of upper and lower root biomass-weighted root activity (p < 0.01), tomato fruit yield (p < 0.01), and nitrogen partial factor productivity (PFP, gg−1, p < 0.01) compared to uniform salt distribution treatment (T3:3). There were significant positive correlations (p < 0.05) between leaf δ15N values and Nitrogen Absorption Ratio (NAR, %, p < 0.05) and PFP (p < 0.05), indicating that under VNDSR, δ15N values can serve as an indicator that comprehensively reflects the information of plant nitrogen utilization efficiency. In conclusion, the VNDSR could mitigate the damage of salt stress to tomatoes, enhance plant nitrogen uptake and utilization efficiency, and promote the growth and development of tomatoes. Availability of data and materialThe datasets generated or analyzed during the current study are available from the corresponding author on reasonable request.

Incorporating canopy radiation enhances the explanation of maize yield change and increases model accuracy under film mulching

Plastic film mulching (PM) has been extensively used to increase crop yields in dryland regions in China. However, the impact of differently colored PM on crop radiation utilization due to the optical properties of the underlying PM surfaces remains unclear. We conducted a two-year field experiment in northwest China to evaluate the dynamics of photosynthetically active radiation interception and absorption (fIPAR and fAPAR), as well as the radiation use efficiency for intercepted and absorbed radiation (RUEi and RUEa) during spring maize (Zea mays L.) growth periods. Two fertilization levels (high and low) and 3 PM treatments (transparent film, black film, and no film) were considered in this study. We also developed empirical regression functions to calculate canopy fAPAR, accounting for both canopy and underlying surface characteristics. Furthermore, we used canopy absorption radiation to drive the Soil-Plant-Atmosphere Continuum System (SPACSYS) model to simulate maize biomass and yield. We found that transparent film mulching (TM) exhibited higher fIPAR and fAPAR than black film mulching and no mulching (CK). TM had an increase of RUEi and RUEa by 10.6% and 9.7%, respectively, relative to CK, resulting in a 9.3–19.2% increase in maize yield and a 25.8–30.2% increase in the partial factor productivity of nitrogen. These increases were mainly attributed to the increased relative chlorophyll content, net photosynthesis rate, and extended grain-filling period under TM. We found that the modified radiation input increased the accuracy of the SPACSYS model in simulating maize biomass and yield. We underscore the importance of using TM in dryland areas to increase crop yields and advocate for incorporating canopy radiation data into crop models, especially in agricultural regions where plastic film mulching is used, to enhance the accuracy of yield simulations.

Enhancing intercropping sustainability: Manipulating soybean rhizosphere microbiome through cropping patterns

Understanding the responses of soybean rhizosphere and functional microbiomes in intercropping scenarios holds promise for optimizing nitrogen utilization in legume-based intercropping systems. This study investigated three cropping layouts under film mulching: sole soybean (S), soybean–maize intercropping in one row (IS), and soybean–maize intercropping in two rows (IIS), each subjected to two nitrogen levels: 110 kg N ha−1 (N110) and 180 kg N ha−1 (N180). Our findings reveal that cropping patterns alter bacterial and nifh communities, with approximately 5 % of soybean rhizosphere bacterial amplicon sequence variants (ASVs) and 42 % of rhizosphere nifh ASVs exhibiting altered abundances (termed sensitive ASVs). Root traits and soil properties shape these communities, with root traits exerting greater influence. Sensitive ASVs drive microbial co-occurrence networks and deterministic processes, predicting 85 % of yield variance and 78 % of partial factor productivity of nitrogen, respectively. These alterations impact bacterial and nifh diversity, complexity, stability, and deterministic processes in legume-based intercropping systems, enhancing performance in terms of yield, nitrogen utilization efficiency, land equivalent ratio, root nodule count, and nodule dry weight under IIS patterns with N110 compared to other treatments. Our findings underscore the importance of field management practices in shaping rhizosphere-sensitive ASVs, thereby altering microbial functions and ultimately impacting the productivity of legume-based intercropping systems. This mechanistic understanding of soybean rhizosphere microbial responses to intercropping patterns offers insights for sustainable intercropping enhancements through microbial manipulation.

Optimization of inter-seasonal nitrogen allocation increases yield and resource-use efficiency in a water-limited wheat–maize cropping system in the North China Plain

Winter wheat–summer maize cropping system in the North China Plain often experiences drought-induced yield reduction in the wheat season and rainwater and nitrogen (N) fertilizer losses in the maize season. This study aimed to identify an optimal interseasonal water- and N-management strategy to alleviate these losses. Four ratios of allocation of 360 kg N ha−1 between the wheat and maize seasons under one-time presowing root-zone irrigation (W0) and additional jointing and anthesis irrigation (W2) in wheat and one irrigation after maize sowing were set as follows: N1 (120:240), N2 (180:180), N3 (240:120) and N4 (300:60). The results showed that under W0, the N3 treatment produced the highest annual yield, crop water productivity (WPC), and nitrogen partial factor productivity (PFPN). Increased N allocation in wheat under W0 improved wheat yield without affecting maize yield, as surplus nitrate after wheat harvest was retained in the topsoil layers and available for the subsequent maize. Under W2, annual yield was largest in the N2 treatment. The risk of nitrate leaching increased in W2 when N application rate in wheat exceeded that of the N2 treatment, especially in the wet year. Compared to W2N2, the W0N3 maintained 95.2% grain yield over two years. The WPC was higher in the W0 treatment than in the W2 treatment. Therefore, following limited total N rate, an appropriate fertilizer N transfer from maize to wheat season had the potential of a “triple win” for high annual yield, WPC and PFPN in a water-limited wheat–maize cropping system.

Multi-objective optimization of farmland water level and nitrogen fertilization management for winter wheat cultivation under waterlogging conditions based on TOPSIS-Entropy

Aiming at the problems of reduced winter wheat yield and aggravation of nitrogen leaching pollution caused by the waterlogging in the Middle-Lower Yangtze Plain, China, a two-year field experiment with three farmland water levels (W40, W60, W80) and three nitrogen application rates (N150, N225, N300) as well as a non-waterlogged treatment (CK) was carried out, to investigate the coupling effects of farmland water level and nitrogen application rate on the plant growth, grain yield, crop water productivity (WPC) and nitrogen load with waterlogging conditions. Three man-made waterlogging events were applied at winter wheat jointing-booting stage, heading-flowering stage and grain filling stage, respectively. The results indicated that with the farmland water level decreased from −40 cm to −60 cm and the nitrogen application rate increased from 150 kg∙ha−1 to 225 kg∙ha−1, the plant height, aboveground dry matter, leaf area index, spike length, grain yield, effective panicles, grain number per ear, 1000-grain weight and WPC in the waterlogging field increased significantly. However, since the nitrogen application rate exceeded 225 kg∙ha−1 and farmland water level lowered more than −60 cm, the favorable effects of nitrogen application rate and farmland water level for winter wheat growth and production reduced. Additionally, both the nitrogen load and partial factor productivity of nitrogen (PFPN) increased with the decline of farmland water level, while the nitrogen load increased and the PFPN decreased with the increasing nitrogen application rate. The raise of nitrogen rate from 150 kg∙ha−1 to 225 kg∙ha−1 was beneficial to plant growth, however, the increase of nitrogen application resulted in the decrease of PFPN and increase of drainage nitrogen loads. Compared with the water farmland water level of −40 cm and nitrogen application rate of 150 kg∙ha−1, the increase of nitrogen application rate and the decrease of farmland water level in the range of 50%-100% resulted in yield raise by 5.78%-32.29% approximately and the increase of nitrogen load by 36.20%-178.44% approximately. The comprehensive evaluation with TOPSIS-Entropy method for plant growth, grain yield, WPC, PFPN and nitrogen loads suggested that, the appropriate nitrogen application rate for winter wheat in the waterlogging areas of Middle-Lower Yangtze Plain in China was 225 kg∙ha−1, and the proper farmland water level was lowering to −80 cm in wet year and −60 cm in dry year within 3 days after waterlogging.

Biochar Application Combined with Water-Saving Irrigation Enhances Rice Root Growth and Nitrogen Utilization in Paddy Fields

To improve nitrogen use efficiency (NUE) during rice cultivation, it is essential to comprehend the morphological and physiological traits of rice roots. However, in high-fertility black soil regions of Northeast China, the effects of combining biochar application with water-saving irrigation (WSI) conditions on rice root development and nitrogen utilization are still unknown. To address this knowledge gap, a combination of field experiments and 15N tracer micro-area investigations was conducted in this study. Four treatments were implemented: (i) controlled irrigation without biochar application (CB0); (ii) controlled irrigation with 2.5 t ha−1 biochar application (CB1); (iii) controlled irrigation with 12.5 t ha−1 biochar application (CB2); and (iv) controlled irrigation with 25 t ha–1 biochar application (CB3). Flooded irrigation conditions without biochar treatment (FB0) were used as the control. The primary objective of this research was to identify the mechanisms by which combined WSI conditions and biochar application affect rice root development and nitrogen utilization. Biochar application enhanced rice root morphological and physiological characteristics. Optimal biochar application increased the longest root length (RL), root volume (RV), root fresh weight (RFW), root active absorption area, root bleeding intensity, and root activity (RA) of rice while also optimizing the root–shoot ratio and facilitating nitrogen absorption by roots. These changes in root morphological and physiological characteristics facilitated the absorption of fertilizer-15N and soil nitrogen by rice roots, ultimately leading to improvements in rice yields and NUEs. Notably, the rice yields, NUE, nitrogen agronomic efficiency (NAE), and nitrogen partial factor productivity (NPFP) of CB2 plants were 16.45%, 39.42%, 24.48%, and 16.45% higher than those of FB0 plants, respectively. These results highlight the effectiveness of biochar application as a strategy to ensure food security and enhance NUE under WSI conditions. Furthermore, this study suggests that the recommended optimal application amount of biochar for the black soil area of Northeast China is 12.5 t ha−1.

Alfalfa Cultivation Patterns in the Yellow River Irrigation Area on Soil Water and Nitrogen Use Efficiency

Establishing lucerne field is an efficient way to protect natural steppes, alleviate conflicts between meadows and livestock, and promote the development of animal husbandry. However, problems such as extensive field management, valuing yield over quality, and low resource utilization are endemic in production. Exploring reasonable cultivation patterns can contribute to improving the current situation of artificial grassland production and promoting the high-quality development of husbandry and prataculture. Lucerne the field experiment was carried out in Jingtai, Gansu Province, China in 2021–2022; this study compared and analyzed the effects of three cultivation patterns—ridge tillage with plastic film mulching (PM), ridge tillage with biodegradable film mulching (BM), and traditional flat planting (FP)—on soil water, heat, and fertilizer, as well as lucerne growth, yield, quality, and water and nitrogen use efficiency. The results show that: (1) during the growth period of lucerne, PM and BM treatments augment the average moisture content of the soil layer of 0–120 cm by 31.19% and 24.03% compared to the FP treatment, respectively. In the soil layer of 0–40 cm, PM and BM treatments abate the soil moisture content of the ridges by an average of 19.29% and 7.89% compared to that in the ditches, respectively. In the soil layer of 40–120 cm, PM and BM treatments elevate the soil moisture content of the ridges by 4.40% and 4.65% on average compared to that in the ditches, respectively. The average soil temperature in a soil layer of 5–25 cm shows PM &gt; BM &gt; FP. In contrast with the FP treatment, PM and BM treatments increase the soil temperature of the ridges by an average of 1.87 °C and 0.96 °C and decrease that of the ditches by an average of 0.47 °C and 0.46 °C, respectively. After two years of planting, the three cultivation patterns all promote the soil nutrient content. Compared to the FP treatment, PM and BM treatments increase the organic matter content by 9.94% and 19.94%, respectively. (2) Ridge tillage with film mulching can evidently stimulate the growth of lucerne and enhance yield and quality. Compared to the FP treatment, PM and BM treatments enhance plant height by an average of 15.37% and 4.04%, stem diameter by an average of 34.14% and 14.58%, yield by an average of 21.20% and 14.77%, crude protein content by an average of 13.47% and 7.68%, and relative feed value by an average of 8.71% and 4.41%, respectively. (3) During the two-year growing period, the irrigation amount of lucerne was 508.60–615.30 mm, and the evapotranspiration was 563.70–761.80 mm. Compared to the FP treatment, PM and BM treatments hoist water use efficiency by an average of 43.50% and 17.56%, nitrogen partial factor productivity by an average of 21.20% and 15.22%, and net income by an average of 14.78% and 11.05%, respectively. In summary, in ridge tillage, both ordinary film mulching and biodegradable film mulching can create a favorable soil environment for lucerne growth and heighten production effect. The former has a better effect on advancing the lucerne production effect, and the latter exhibits superior performance in improving soil fertility.

Energy, environmental, and economic benefits of integrated paddy field farming

Rice yields have stabilized in the Chengdu Plain, and the implementation of integrated paddy field farming has shown potential for enhancing resource utilization. However, further investigation is required to clarify its impact on production sustainability. Accordingly, this study compared grain yields, energy use, greenhouse gas emissions, and economic benefits of single cropping rice (SCR), rice-duck symbiosis (RDS), and rice-fish symbiosis (RFS) over a three-year period (2018–2020). The grain yields were 16.24%–23.96 % higher in SCR than in RDS and RFS, but nitrogen fertilizer use was reduced by 31.93%–32.15 % in RDS and RFS, and the partial factor productivity of nitrogen was increased by 21.96–23.82 %. RDS and RFS required 1.87–2.00 times more energy than SCR and were only 55.36%–57.80 % as efficient as SCR. They also had higher CO2 (36.10%–42.20 %) and CH4 (8.01%–28.88 %) emissions but lower N2O (0.02%–21.18 %) emissions than SCR. Economically, RDS and RFS produced 1.30–1.48 times higher net benefits with 1.44–1.47 times higher costs than SCR. The benefit-cost ratio of RFS was comparable to SCR and 11.38%–11.87 % higher than RDS. In summary, RDS and RFS consume more energy (feed accounts for more than half) but provide higher yields and better-quality proteins, which are crucial to improving farmer motivation and ensuring protein availability.

Conservation agriculture works as a catalyst for sustainable sodic soil reclamation and enhances crop productivity and input use efficiency: A scientific inquiry

Soil sodicity is a growing concern for crop growth and development in arid and semi-arid regions of the world. Conservation agriculture (CA) provides an effective solution towards reclamation of degraded sodic lands and enhance the crop productivity. A field experiment was carried out to assess the sodic soil reclamation potential of CA based management practices including zero tillage, legume (mungbean; Mb) rotation, residue (+R) mulch, and subsurface drip irrigation (SDI) for three years under rice-wheat (RW) system. The system scenarios (Sc) comprised of multiple indicators to measure their impact on soil properties as well as system productivity, profitability, water and nitrogen use efficiency. The results indicated that soil pHs under Sc5-Sc8 (CA-based SDI scenarios) was significantly (p < 0.05) lowered by 2.16, 2.16 and 1.33% compare with mean of Sc1 and Sc2 (CT-based system; 9.10, 8.29 and 8.14) at all three soil layers (0-5, 5-15 and 15-30 cm), respectively. Similarly, the exchangeable sodium percentage (ESP) was lowered by 2.9, 11.2 and 14.9% under CA-based scenarios with residue management compared with CT-based system (mean of Sc1 and Sc2; 15.2, 17.2 and 28.6%) during the study. The concentration of extractable anions (COЗ2‾, HCOЗ‾, Cl‾) decreased notably whereas, soil organic carbon and soil solution cations (Na+, Ca2+, Mg2+) concentration were increased under CA based management SDI plots. In addition, CA with SDI scenarios (mean of Sc5-Sc8) proved to be more productive and water-efficient than CA-based flood irrigation (FI; mean of Sc3 and Sc4). Moreover, CA-based FI and SDI scenarios saved 29.5 and 60.7% irrigation water, and improved the partial factor productivity of nitrogen (PFPN) by 6.8 and 24.4%, respectively compared to CT-R (conventional tillage without residue) based Sc1. Therefore, CA practices can potentially reduce sodicity and improve soil chemical properties for profitable crop cultivation.

Partial substitution of chemical fertilizer by organic fertilizer increases yield, quality and nitrogen utilization of Dioscorea polystachya.

This field experiment aimed to investigate the effects of different ratios of organic and inorganic fertilizers with maintaining equal nitrogen application rates on the yield, quality, and nitrogen uptake efficiency of Dioscorea polystachya (yam). Six treatments were set, including a control without fertilizer (CK), sole application of chemical fertilizer (CF), sole application of organic fertilizer (OM), 25% organic fertilizer + 75% chemical fertilizer (25%OM + 75%CF), 50% organic fertilizer + 50% chemical fertilizer (50%OM + 50%CF), and 75% organic fertilizer + 25% chemical fertilizer (75%OM + 25%CF). The experiment followed a randomized complete block design with three replications. Various yield parameters, morphology, quality indicators, and nitrogen utilization were analyzed to assess the differences among treatments. The results indicated that all fertilizer treatments significantly increased the yield, morphology, quality indicators, and nitrogen utilization efficiency compared to the control. Specifically, 25%OM + 75%CF achieved the highest yield of 31.96 t hm-2, which was not significantly different from CF (30.18 t hm-2). 25%OM + 75%CF exhibited the highest values at 69.23 cm in tuber length and 75.86% in commodity rate, 3.14% and 1.57% higher than CF respectively. Tuber thickness and fresh weight of 25%OM + 75%CF showed no significant differences from CF, while OM and 50%OM+50%CF exhibited varying degrees of reduction compared to CF. Applying fertilizer significantly enhanced total sugar, starch, crude protein, total amino acid, and ash contents of D. polystachya (except ash content between CK and OM). Applying organic fertilizer increased the total sugar, starch, crude protein, total amino acid, and ash contents in varying degrees when compared with CF. The treatment with 25%OM+75%CF exhibited the highest increases of 6.31%, 3.78%, 18.40%, 29.70%, and 10%, respectively. Nitrogen content in different plant parts followed the sequence of tuber > leaves > stems > aerial stem, with the highest nitrogen accumulation observed in 25%OM + 75%CF treatment. Nitrogen harvest index did not show significant differences among treatments, fluctuating between 0.69 and 0.74. The nitrogen apparent utilization efficiency was highest in 25%OM + 75%CF (9.89%), followed by CF (9.09%), both significantly higher than OM (5.32%) and 50%OM + 50%CF (6.69%). The nitrogen agronomic efficiency varied significantly among treatments, with 25%OM + 75%CF (33.93 kg kg-1) being the highest, followed by CF (29.68 kg kg-1), 50%OM + 50%CF (21.82 kg kg-1), and OM (11.85 kg kg-1). Nitrogen partial factor productivity was highest in 25%OM + 75%CF treatment (76.37 kg kg-1), followed by CF (72.11 kg kg-1), both significantly higher than 50%OM + 50%CF (64.25 kg kg-1) and OM (54.29 kg kg-1), with OM exhibiting significantly lower values compared to other treatments. In conclusion, the combined application of organic and inorganic fertilizers can effectively enhance the yield, quality, and nitrogen utilization efficiency of D. polystachya. Particularly, the treatment with 25% organic fertilizer and 75% chemical fertilizer showed the most promising results.

Improving Tuber Yield of Tiger Nut (Cyperus esculentus L.) through Nitrogen Fertilization in Sandy Farmland.

The cultivation of tiger nut (Cyperus esculentus L.) on marginal lands is a feasible and effective way to increase food production in Northern China. However, the specific influence of nitrogen fertilizer application on the growth dynamics, tuber expansion, overall yield, and nitrogen use efficiency (NUE) of tiger nuts cultivated on these sandy lands is yet to be fully elucidated. From 2021 to 2022, we conducted a study to determine the effect of N fertilizers on the leaf function morphology, canopy apparent photosynthesis (CAP), tuber yield, and NUE of tiger nut. The results indicate that the tuber yield and NUE are closely related to the specific leaf area (SLA), leaf area index (LAI), leaf nitrogen concentration per area (NA), CAP, and tuber expansion characteristics. Notably, significant enhancements in the SLA, LAI, NA, and CAP during the tuber expansion phase ranging from the 15th to the 45th day under the 300 kg N ha-1 treatment were observed, subsequently leading to increases in both the tuber yield and NUE. Moreover, a maximum average tuber filling rate was obtained under the N300 treatment. These improvements led to substantial increases in the tuber yield (32.1-35.5%), nitrogen agronomic efficiency (NAE, 2.1-5.3%), nitrogen partial factor productivity (NPP, 4.8-8.1%), and nitrogen recovery efficiency (NRE, 3.4-5.7%). Consequently, 300 kg N ha-1 of N fertilizers is the most effective dose for optimizing both the yield of tiger nut tubers and the NUE of tiger nut plants in marginal soils. Structural equation modeling reveals that N application affects the yield and NUE through its effects on leaf functional traits, the CAP, and the tuber filling characteristics. Modeling indicates that tuber expansion characteristics primarily impact the yield, while CAP predominantly governs the NUE. Above all, this study highlights the crucial role of N fertilizer in maximizing the tiger nut tuber yield potential on marginal lands, providing valuable insights into sustainable farming in dry areas.

One-Time Contact Application of Controlled-Release Urea and Optimized Method Improved Rice Yield and Nitrogen Use Efficiency with 50% Nitrogen Input

Excessive nitrogen application is a common phenomenon in rice production in China, which will lead to a low nitrogen utilization rate and increase farmers’ production costs. In Jingzhou, Hubei Province, for two consecutive years (2021, 2022), rice was planted with nursery-box total fertilization (NBTF) technology to provide technical support for rice seedling box contact fertilization technology. The results showed that, compared with the conventional treatment, the seedling emergence rate decreased by 7.70–11.87%, but the seedling quality significantly improved and the plant height significantly increased by 4.38–6.06% in the full-heading stage after the aforementioned treatments. The leaf area index significantly increased by 16.75–34.55%, 10.04–19.30%, and 12.13–18.60% in the tiller, booting, and full-heading stages, respectively, whereas the photosynthetic rate significantly increased by 3.80–5.25% in the booting stage. The rice yield under the 50% CRU and 50% CRU + S treatments was the same as that under the FFP treatment. The rice yield under 50% CRU + BT and 50% CRU + BT + S treatments was 7.50–10.61% higher than that under the FFP treatment; nitrogen partial factor productivity increased by 96.15–123.63%. NBTF combined with Boxingtanzhuang (in Chinese) seedling trays showed an increase in yield, whereas normal seedling trays showed a stable yield. It is suggested that the seedling tray and fertilizer should be specialized in the rice seedling box, and the height of the seedling tray should be increased by 3–5 cm. At the same time, special controlled-release urea should be selected to ensure less N release before emergence and improve the seedling emergence rate so as to popularize NBTF technology in a large area.

Optimizing Nutrient and Energy Efficiency in a Direct-Seeded Rice Production System: A Northwestern Punjab Case Study

This study was carried out in Amritsar, Punjab, to find out how efficiently nutrients were used and how much energy was employed in direct-seeded rice (DSR) production. In this study, four levels of nitrogen (0, 40, 50, and 60 kg N ha−1) and three levels of phosphorus (0, 37.5, and 45 kg P2O5 ha−1) were tested. In a rice production system, the energy indices of various inputs and outputs were evaluated through the application of energy equivalency. The nutrient-use efficiencies in rice were assessed using different efficiency indices. The maximum grain yields of 38.9 q ha−1 and 36.9 q ha −1 were recorded at 50 kg N ha−1 and 45 kg P2O5 ha−1, respectively. On the other hand, application of nitrogen at 60 kg N ha−1 and phosphorus at 45 kg P2O5 ha−1 resulted in maximum straw yield of 57.1 q ha−1 and 51.1 q ha−1, respectively. In comparison with the control, application of 60 and 50 kg N ha−1 resulted in 161.9% and 151.0% higher grain yield, respectively. On the other hand, with applications of 45 kg P2O5 ha−1 and 37.5 kg P2O5 ha−1, an increase in the grain yield of 17.3 and 28.6%, respectively, over the control was recorded. Moving further towards nutrient-use efficiencies (NUEs), the highest values of partial factor productivity of nitrogen (PFPN), agronomic efficiency of nitrogen (AEN), partial nutrient balance of nitrogen (PNBN), and recovery efficiency of nitrogen (REN) were 89.1, 50.4, 1.78 and 0.72, respectively, which were obtained at 40 kg N ha−1, after which the values started decreasing steadily. In the case of phosphorus, the partial factor productivity (PFPP) of 88.6 was the maximum at 37.5 kg P2O5 ha−1, but partial nutrient balance (PNBP) of 0.36 and recovery efficiency (REP) of 0.08 were highest at 45 kg P2O5 ha−1. The main results revealed that the farmer field had an excessive amount of non-renewable energy inputs. The experimental field depicted greater energy-usage efficiency (EUE) of 4.5, energy productivity (EP) of 0.14, and energy profitability (EP1) of 3.5. These results were primarily ascribed to a significant drop in energy inputs under direct-seeded rice (DSR). In the case of non-renewable energy inputs, fertilizer made the maximum contribution to energy input (47.9%) in the farmer’s field. We conclude that nutrient-use efficiencies and energy-use efficiency were highest at 50 kg N and 45 kg P2O5 ha−1. This recommendation is beneficial for farmers because lower inputs and higher outputs are the main objective of every farmer.

Evaluation of annual production and economic benefits of tropical rice-crayfish coculture system in China

CONTEXTIn recent years, the rice-crayfish coculture has shown significant progress as an agricultural technology with significant economic value in the middle and lower reaches of the Yangtze River in China. Nonetheless, as the promotion of the technology expands, the unvarying co-culture method poses challenges in adapting to the diverse environmental conditions across different regions. This has resulted in regional disparities dominated by environmental factors, which have emerged as the primary obstacle to the advancement of rice-crayfish coculture. OBJECTIVEIt is uncertain whether the rice-crayfish coculture model can be implemented in tropical regions due to the higher temperature and stronger solar radiation. Therefore, this study analyzes the feasibility of establishing the rice-crayfish coculture model through estimating the rice and crayfish annual production and the economic and ecological benefits in the tropical region. METHODSThe growth, annual production, and nitrogen partial factor productivity (NPFP) of rice, nitrogen dynamics in the field water, as well as the economic inputs and benefits associated with the rice-crayfish coculture system over two years were evaluated in Hainan province. RESULTS AND CONCLUSIONSIt was found that: 1) Even with a reduction of 33.3% in nitrogen fertilizer application, the annual production of the rice-crayfish coculture system remains equivalent to that of the rice monoculture system. Furthermore, the rice-crayfish coculture can increase the effective panicle number of rice. 2) The rice-crayfish coculture system can provide nutrients to support rice growth without polluting the water environment. The nitrogen fertilizer partial productivity in the rice-crayfish coculture system is significantly higher than that in the rice monoculture system. Crayfish culture introduced additional nitrogen in rice field at early stage, but it did not gain any form of nitrogen content in the field water at the end of the season. 3) In comparison to the rice monoculture system, the tropical rice-crayfish coculture system increased net profit by 152.82% -745.26%. 4) Comprehensive analyses of the growth, yield, and economic benefits showed that SXHN is better than YXYLS, which indicated that suitable varieties were needed for developing rice-crayfish coculture in the tropics. SIGNIFICANCERice-crayfish coculture is an economic and ecological agricultural system. However, rice-crayfish coculture encounters extensive technical challenges across various regions, because of the varied culture conditions. These challenges impede the expansion of the rice-crayfish coculture model. Therefore, this study aimed to evaluate the practicality of the rice-crayfish coculture system in the tropics to facilitate the development of the rice-crayfish coculture model.

Optimization of N Fertilizer Type and Ridge–Furrow Ratio to Improve Resource Use Efficiency and Grain Yield of Rain-Fed Winter Wheat in Loess Plateau, China

Ridge and furrow plastic mulch (RFPM) and nitrogen (N) application are effective strategies for improving crop productivity in China’s Loess Plain. However, it is not clear how the ridge–furrow ratio and nitrogen fertilizer type (NT) affect the use of water, nitrogen, heat, and radiation resources for the enhancement of rain-fed wheat production. Two nitrogen fertilizer types (traditional urea (TU) and controlled-release urea (CRU)) and four planting patterns (conventional flat planting (F) and the RFPM system of 20 cm ridges with 40 cm furrows (R2F4), 40 cm ridges with 40 cm furrows (R4F4), and 60 cm ridges with 40 cm furrows (R6F4)) were tested from September 2018 to June 2021 during the winter wheat growing season. It was found that the RFPM system can increase soil thermal time (TTsoil) from 41.0 to 152.1 °C d compared to the F. RFPM system thermal effect, which reduced the vegetative growth period and prolonged the reproductive growth period for 2 to 7 days, which promoted an increase in the leaf area index (LAI) and final dry matter (DM) accumulation. These significantly increased the grain yield (GY) in the RFPM system by 51.6–115.2% and enhanced the thermal time use efficiency (TUE) by 48–99.5%, water productivity (WP) by 37.4–76.3%, radiation use efficiency (RUE) by 16.3–34.4%, and partial factor productivity of nitrogen (PFPN) by 51.6–115.2% compared to F. Although a high ridge and furrow ratio in combination with CRU increased the GY and resource use efficiency, it also exacerbated the soil water depletion, especially in the soil layer between 40 and 140 cm. Overall, CRU combined with the 40 cm ridge and 40 cm furrow RFPM system maximized resource efficiency and increased wheat production on China’s Loess Plateau.

Irrigation and Fertilization Scheduling for Peanut Cultivation under Mulched Drip Irrigation in a Desert-Oasis Area.

The aim of this study was to investigate the impact of water and nitrogen regulation on the characteristics of water and fertilizer demands and the yield, quality, and efficiencies of the water and nitrogen utilization of peanuts cultivated under mulched drip irrigation in a desert-oasis region. The experiment, conducted in Urumqi, Xinjiang, centered on elucidating the response mechanisms governing peanut growth, yield, quality, water consumption patterns, and fertilizer characteristics during the reproductive period under the influence of water and nitrogen regulation. In the field experiments, three irrigation levels were implemented, denoted as W1 (irrigation water quota of 22.5 mm), W2 (irrigation water quota of 30 mm), and W3 (irrigation water quota of 37.5 mm). Additionally, two nitrogen application levels, labeled N1 (nitrogen application rate of 77.5 kg·ha-1) and N2 (a nitrogen application rate of 110 kg·ha-1), were applied, resulting in seven treatments. A control treatment (CK), which involved no nitrogen application, was also included in the experimental design. The results indicate a direct correlation between the increment in the irrigation quota and increases in farmland water-related parameters, including water consumption, daily water consumption intensity, and water consumption percentage. The nitrogen harvest index (NHI) demonstrated a higher value in the absence of nitrogen application compared to the treatment with elevated nitrogen levels. The application of nitrogen resulted in an elevation in both nitrogen accumulation and nitrogen absorption efficiency within pods and plants. When subjected to identical nitrogen application conditions, irrigation proved to be advantageous in enhancing water-use efficiency (WUE), nitrogen partial factor productivity (NPFP), and the yield of peanut pods. The contribution rate of water to pod yield and WUE exceeded that of nitrogen, while the contribution rate of nitrogen to nitrogen-use efficiency (NUE) was higher. The total water consumption for achieving a high yield and enhanced water- and nitrogen-use efficiencies in peanuts cultivated under drip irrigation with film mulching was approximately 402.57 mm. Taking into account yield, quality, and water- and nitrogen-used efficiencies, the use of an irrigation quota of 37.5 mm, an irrigation cycle of 10-15 days, and a nitrogen application rate of 110 kg·ha-1 can be regarded as an appropriate water and nitrogen management approach for peanut cultivation under mulched drip irrigation in Xinjiang.

Productivity, nutrient indices and soil nutrient status of short grain aromatic rice-green gram system as influenced by integrated nutrient management strategies

New age challenges of irrational use of fertilizers under monocropping of rice calls for integrative nutrient management strategy along with establishment of rice based cropping system. A field study was carried out in 2017–18 and 2018–19 at Odisha University of Agriculture and Technology, Bhubaneswar, India to investigate the integrated nutrient management strategies on productivity, nutrient indices and soil nutrient status in short grain aromatic rice-green gram cropping system. The experiment was set up in split plot design with six nutrient management strategies in rice were taken in main plot in randomized block design and three nutrient management strategies in green gram were taken as sub plot in split-plot design in sequence. Results revealed that application of 50% NPK+ 50% Recommended Dose of Nitrogen (RDN)-FYM to rice followed by 75% NPK + Rhizobium + Phosphorus Solubilizing Bacteria to green gram recorded the highest rice equivalent yield and production efficiency in 2017–18 and 2018–19 followed by 50% NPK+ 50% RDN-FYM to rice followed by 100% NPK to green gram. Application of 50% NPK+ 50% RDN-FYM to rice and 75% NPK + Rhizobium + PSB to green gram recorded the highest partial factor productivity of nitrogen, nitrogen utilization efficiency and nitrogen uptake efficiency in the system. Soil nutrient status of the cropping system improved with balanced application of organic and inorganic sources of nutrients compared to mineral fertilizers only. Thus, supplementing FYM and sesbania as organic manures along with reduced dose of inorganic fertilizers improved sustainability of rice-green gram system along with improving soil fertility.

Long-term maintenance of high yield and soil fertility with integrated soil-crop system management on the Loess Plateau

Ridge–furrow with full film mulching has been widely applied to increase crop yield and water productivity on the Loess Plateau, but it may stimulate carbon (C) mineralization. How to integrate other technological benefits based on this technology for long-term maintenance of high yield and soil fertility is a pressing issue. With the local farmers’ practice (FP) as a control, three integrated soil-crop system management (ISSM) practices integrating fertilizer rates, fertilizer types and planting densities (ISSM-N1, ISSM-N2 and ISSM-MN) were established to improve maize yield and soil quality. Compared with the FP, the maize yield increased by 13.34%, 21.83% and 30.24%, and the soil quality index (SQI) increased by 9.66%, 14.91% and 38.38% for ISSM-N1, ISSM-N2 and ISSM-MN, respectively. However, ISSM-N1 did not significantly increase yield, and ISSM-N2 increased residual soil nitrate and decreased nitrogen (N) partial factor productivity significantly. Compared to the FP, ISSM practices increased soil organic carbon (SOC), labile organic C fractions (LOCFs) and potassium permanganate organic C fractions in the topsoil to varying degrees, but only ISSM-MN reached significant levels for most C fractions. The sensitivity index indicated very easily oxidizable C (24.6%), easily oxidizable C (24.7%), hot-water extractable C (30.8%), labile organic C (24.7%) and particulate organic C (57.3%) were more sensitive than SOC (22.7%). ISSM-MN sequestered significantly higher C than the other treatments. The results of the relative importance analysis and the structural equation model indicated that LOCFs were the direct contributors to yield, while recalcitrant C (CO) was the indirect contributor, revealing the underlying mechanism that CO decomposed to replenish LOCFs and the total N pool with the water soluble C pool as the transit station. Overall, ISSM-MN is the most promising strategy to improve crop yield and soil fertility in the long term on the Loess Plateau.

Response of soil water, temperature, and maize productivity to different irrigation practices in an arid region

Irrigation combined with plastic film mulch (IPFM) is widely used in arid areas to alleviate water shortages and increase crop yields. However, the mechanisms by which IPFM affected soil water content (SWC) and soil temperature (ST) to promote crop photosynthesis and resources (water, nitrogen and radiation) utilization are unclear. A field experiment was conducted in northwestern China in 2019 and 2020 to evaluate the effects of different irrigation methods combined with transparent film mulching (70% cover) on soil hydrothermal conditions and maize growth, photosynthetic characteristics, yield, and resource use efficiency. The four treatments included border irrigation with no mulching (CK), border irrigation under film mulching (TM), ridge irrigation under film mulching (RM), and drip irrigation under film mulching (DM). Our results showed that TM and RM significantly improved SWC, enhanced photosynthetic rate (Pn), and lowered non-photochemical quenching (NPQ) in maize relative to CK. The DM treatment had wetter soil and lower soil surface temperatures from the V12 to R3 stage, further accelerating maize photosynthesis and resource use relative to the other treatments and thus producing the higher leaf area index and biomass accumulation. The results suggest that DM is an efficient farming strategy, increasing yield by 3.7 − 61.3%, radiation use efficiency for maize grain yield (RUEGY) by 2.8–44.3%, irrigation water use efficiency (IWUE) by 29.7–96.5%, partial factor productivity of nitrogen (PFPN) by 3.7–61.3%, and economic benefit by 12.4–100.0% relative to the other treatments. In addition, the regression function revealed that the increased soil water storage and decreased ST from VT to R3 stages helped increase maize yield. Thus, we recommended DM practice for increasing maize production in arid areas and proposed soil water storage in 0–120 cm profile ranging 342–389 mm and ST ranging from 18.9° to 22.1°C as reference management indicators.

The joint application of biochar and nitrogen enhances fruit yield, quality and water-nitrogen productivity of water-stressed greenhouse tomato under drip fertigation

The biochar application has been reported to have a positive effect on crop yield and nutrient utilization. However, the effects of the joint application of biochar and nitrogen (N) on soil physical properties, fruit yield, quality, crop water productivity (WP) and partial factor productivity of nitrogen (PFPN) of water-stressed greenhouse tomato under drip fertigation remain poorly understood. In this study, a two-season experiment was conducted on greenhouse tomato in autumn 2021 and spring 2022, involving two biochar application rates (0 and 30 t ha–1 only in the first season before sowing), two N fertilization rates (175 and 250 kg N ha–1), and three irrigation levels (100%, 75%, and 50% of crop evapotranspiration). The results showed that biochar application significantly decreased soil bulk density by 7–13%, but significantly increased soil porosity by 5.5%− 10% and fruit yield by 43.2–73.8% compared with the non-biochar treatment. The biochar application significantly affected the total soluble solids (TSS), soluble sugar (SS), and vitamin C of tomato fruits. The interaction of biochar application and N fertilization increased PFPN and WP by 67.4% and 76.3% in autumn 2021, and by 38.1% and 51.8% in spring 2022, respectively. Biochar rate and irrigation level had significant effects on TSS and SS contents in both seasons, but N rate significantly affected TSS in autumn 2021 only and SS in both seasons. The interaction of biochar application, N rate and irrigation level had significant effects on fruit yield. The effects of biochar rate, N rate, and irrigation level on PFPN were significant in both growing seasons. The joint application of biochar and nitrogen significantly enhanced fruit yield, quality and water-nitrogen productivity of water-stressed greenhouse tomato. The Principal Component Analysis (PCA) revealed that PC1 accounted for 47.7% and 48%of the variation in autumn 2021 and spring 2022, while PC2 accounted for 14.6% and 15.6% in autumn 2021 and spring 2022, respectively. This study underscores the significance of biochar application in drip-fertigated greenhouse tomato cultivation and highlights its sustained positive effects in the next growing season.