Chain Nitrogen Research Articles

Pressure-Induced High-Energy-Density BeN6 Materials: First-Principles study

Recently, the use of polymeric nitrogen in the search for high-energy–density materials (HEDMs) has attracted widespread attention. However, synthesizing polymeric nitrogen materials is quite challenging; for instance, the synthesis of cubic gauche nitrogen requires a high pressure of 110 GPa. Previous theoretical predictions and experiments have shown that adding alkaline earth metals as cationic ligands can stabilize polymeric nitrogen and reduce the synthesis pressure. Using the USPEX structural prediction code and first-principles calculations, this study predicted 2 new nitrogen salt with nitrogen contents up to 89.80 %, namely α-BeN6 and β-BeN6, with their unique nitrogen chain structures, have energy densities as high as 3.32 and 3.59 kJ/g, respectively. The exceptional explosive properties reveal these two BeN6 are potential HEDMs. In addition, α-BeN6 is a direct bandgap semiconductor.

One-Dimensional Non-coplanar Nitrogen Chains in Manganese Tetranitride under High Pressure.

Transition metal nitrides have great potential applications as incompressible and high energy density materials. Various polymeric nitrogen structures significantly affect their properties, contributing to their complex bonding modes and coordination conditions. Herein, we first report a new manganese polynitride MnN4 with bifacial trans-cis [N4]n chains by treating with high-pressure and high-temperature conditions in a diamond anvil cell. Our experiments reveal that MnN4 has a P-1 symmetry and could stabilize in the pressure range of 56-127 GPa. Detailed pressure-volume data and calculations of this phase indicate that MnN4 is a potential hard (255 GPa) and high energy density (2.97 kJ/g) material. The asymmetric interactions impel N1 and N4 atoms to hybridize to sp2-3, which causes distortions of [N4]n chains. This work discovers a new polynitride material, fills the gap for the study of manganese polynitride under high pressure, and offers some new insights into the formation of polymeric nitrogen structures.

High-pressure Synthesis of Cobalt Polynitrides: Unveiling Intriguing Crystal Structures and Nitridation Behavior.

In this study, we conduct extensive high-pressure experiments to investigate phase stability in the cobalt-nitrogen system. Through a combination of synthesis in a laser-heated diamond anvil cell, first-principles calculations, Raman spectroscopy, and single-crystal X-ray diffraction, we establish the stability fields of known high-pressure phases, hexagonal NiAs-type CoN, and marcasite-type CoN2 within the pressure range of 50-90 GPa. We synthesize and characterize previously unknown nitrides, Co3N2, Pnma-CoN and two polynitrides, CoN3 and CoN5, within the pressure range of 90-120 GPa. Both polynitrides exhibit novel types of polymeric nitrogen chains and networks. CoN3 feature branched-type nitrogen trimers (N3) and CoN5 show π-bonded nitrogen chain. As the nitrogen content in the cobalt nitride increases, the CoN6 polyhedral frameworks transit from face-sharing (in CoN) to edge-sharing (in CoN2 and CoN3), and finally to isolated (in CoN5). Our study provides insights into the intricate interplay between structure evolution, bonding arrangements, and high-pressure synthesis in polynitrides, expanding the knowledge for the development of advanced energy materials.

On the dependence of electrical mobility on temperature, humidity and structure of alkylammonium ions

Insights into the effect of temperature (T) and relative humidity (RH) as well as structure and polarisation on ion mobility help the comparison and interpretation of mobility and mass-based data. We measured alkylammonium ions in air under different T (14 °C, 24 °C, 34 °C and 41 °C) and RH (0 %, 20 %, 40 %) conditions using two individual setups (in both cases a planar differential mobility analyser coupled with a time-of-flight mass spectrometer) and the results are in excellent agreement. Mobility increases with rising T and decreases with water vapour loading. When separating the measurement mobility by structures, clear mass dependence was observed. The measured mobilities exhibited large deviations from theoretically calculated results in dry conditions, which are possibly caused by adduct formation on the monomer ions via clustering (or reactions). This phenomenon seems to be unavoidably associated with light ions under atmospheric pressures, which is worth further exploration and bearing in mind when comparing measurements to calculations. Both methanol and oxygen (occasionally nitrogen or alkyl chain elongation) are possible candidates of the adduct. Under spherical assumption, we used the modified Mason–Schamp's approximation to link the measured mobility to the mobility equivalent diameter. The drag enhancement factor ξ and the effective gas-molecule collision diameter dg derived from our measurement data are comparable to literature values. Our data also exposed a non-linear dependence on the polarisation parameter ε*. Polarisation, ξ and dg were parameterised using linear models against ion structures, T, and RH for primary, secondary and tertiary alkylammonium ions with identical alkyl groups. Our model parametrisations predict mobilities within ±10 % deviation from the measured data. The model also has satisfying predicting power for alkylammonium ions with unidentical alkyl structures.

Combinations of arginine and pullulan reveal the selective effect of stabilization mechanisms on different lyophilized proteins

The stability of lactate dehydrogenase (LDH) and β-galactosidase (β-gal), incorporated in arginine/pullulan (A/P) mixtures at various weight ratios by lyophilization, was determined. The physicochemical characteristics of various A/P mixtures were assessed. With decreasing A/P ratios, the glass transition temperature of the formulations increased. Furthermore, arginine crystallization due to high relative humidity (RH) exposure was prevented at an A/P weight ratio of 4/6 or less. When stored at 0 % RH / 60 °C for 4 weeks, arginine was superior to pullulan as stabilizer. During storage at 43 % RH / 30 ℃ for 4 weeks, the enzymatic activity of LDH was best retained at an A/P weight ratio of 2/8, while β-gal activity was relatively well-retained at A/P weight ratios of both 8/2 and 2/8. LDH seemed to be more prone to degradation in the rubbery state. In the glassy state, β-gal degraded faster than LDH. Solid-state nuclear magnetic resonance spectroscopy showed that (labeled) arginine experienced a different interaction in the two protein samples, reflecting a modulation of long-range correlations of the arginine side chain nitrogen atoms (Nε, Nη). In summary, LDH stabilization in the A/P matrix requires vitrification. Further stabilization difference between LDH and β-gal may be dependent on the interaction with arginine.

Purely single-bonded spiral nitrogen chains stabilized by trivalent lanthanum ions.

Inspired by the single-bonded nitrogen chains stabilized by tetravalent cerium, pentavalent tantalum, and hexavalent tungsten atoms, we explored the possibility of single-bonded nitrogen polymorphs stabilized by trivalent lanthanum ions. To achieve this, we utilized the crystal structure search method on the phase diagram of binary La-N compounds. We identified three novel thermodynamically stable phases, the C2/c LaN3, P-1 LaN4, and P-1 LaN8. Among them, the C2/c phase with infinite helical poly-N6 chains becomes thermodynamically stable above 50GPa. Each nitrogen atom in the poly-N6 chain acquires one extra electron, and the spiral chain is purely single-bonded. The C2/c phase has an indirect band gap of ∼1.6eV at 60GPa. Notably, the band gap exhibits non-monotonic behavior, decreases first and then increases with increasing pressure. This abnormal behavior is attributed to the significant bonding of two La-N bonds at around 35GPa. Phonon spectrum calculations and AIMD simulations have confirmed that the C2/c phase can be quenched to ambient conditions with slight distortion, and it exhibits excellent detonation properties. Additionally, we also discovered armchair-like nitrogen chains in LaN4 and the armchair and zigzag-like mixed nitrogen chains in LaN8. These results provide valuable insights into the electronic and bonding properties of nitrides under high pressure and may have important implications for the design and development of novel functional materials.

Unfolding the secrets of microbiome (Symbiodiniaceae and bacteria) in cold-water coral.

Recent deep-ocean exploration has uncovered a variety of cold-water coral (CWC) ecosystems around the world ocean, but it remains unclear how microbiome is associated with these corals at a molecular levels. This study utilized metabarcoding, tissue section observation, and metatranscriptomes to investigate the microbiome (Symbiodiniaceae and bacteria) of CWC species (Narella versluysi, Heterogorgia uatumani, and Muriceides sp.) from depths ranging from 260 m to 370 m. Warm-water coral (WWC) species (Acropora pruinosa, Pocillopora damicornis, and Galaxea fascicularis) were used as control groups. Results revealed that CWC host diverse bacteria and Symbiodiniaceae cells were observed in endoderm of CWC tissues. Several new candidate bacterial phyla were found in both CWC and WWC, including Coralsanbacteria, Coralqiangbacteria, Coralgsqaceae, Coralgongineae, etc. Both the 16S rRNA gene sequencing and metatranscriptomes revealed that Actinobacteria and Proteobacteria were abundant bacterial phyla in CWC. At the gene transcription level, the CWC-associated Symbiodiniaceae community showed a low-level transcription of genes involved in photosynthesis, CO2 fixation, glycolysis, citric acid cycle, while bacteria associated with CWC exhibited a high-level transcription of genes for carbon fixation via the Wood-Lijungdahl pathway, short chain fatty acids production, nitrogen, and sulfur cycles. IMPORTANCE This study shed new light on the functions of both Symbiodiniaceae and bacteria in cold-water coral (CWC). The results demonstrated that Symbiodiniaceae can survive and actively transcribe genes in CWC, suggesting a possible symbiotic or parasitic relationship with the host. This study also revealed complete non-photosynthetic CO2 fixation pathway of bacteria in CWC, as well as their roles in short chain fatty acids production and assimilation of host-derived organic nitrogen and sulfur. These findings highlight the important role of bacteria in the carbon, nitrogen sulfur cycles in CWC, which were possibly crucial for CWC survival in in deep-water environments.

Enhanced thermoelectric properties of SWCNT by new nitrogen chains doping

Single walled carbon nanotubes (SWCNT) are attractive materials for thermoelectric (TE) devices because of their unique one-dimensional structure and provide us for developing a flexible TE devices due to their mechanical properties. In this paper, the TE properties of pristine small SWCNT (3,3) and three new nitrogen (N) doping models namely CN, C2N2 (doping by two N-chains) and C4N2 (doping by three N-chains) are calculated using the density functional theory (DFT) combined with Boltzmann's semi-classical transport theory. Dynamical and energetic stability of the compounds are confirmed from the phonon density of states curve and formation energy calculations. The values of Seebeck coefficient (S), electrical conductivity (σ), thermal conductivity (κ), power factor (PF) and figure of merit (ZT) are reported at different temperature and discussed in detail. The results show that N-doping significantly improves the TE properties of the pristine nanotube and show a reasonable agreement with previous experiments and ab-initio calculations. It was found that the C2N2 configuration presents the largest Seebeck coefficient of 70.53 μV/K and the figure of merit ZT of 0.25 compared to other doping models. N-chains doping is therefore a new suitable way to improve the TE properties of small SWCNT in order to making them a good candidate for flexible TE devices.

Strain engineering of the electrocatalytic activity of nitrogen-rich BeN4 Dirac monolayer for hydrogen evolution reaction

The strong bond energy and short bond length of N≡N triple bond make it a challenging target for synthesizing nitrogen-rich compounds. However, recent research has successfully fabricated atomic-thick BeN4 layers under high pressure (Bykov et al., 2021). Beryllonitrene, a new 2D material, consists of a Be atom and polymeric nitrogen chains and has anisotropic Dirac cones located near the Fermi level. This distinguishes it from graphene, which has isotropic Dirac cones, bulk PtTe2 and 2D borophene, which have Dirac cones located far from the Fermi energy. The anisotropic Dirac cones in beryllonitrene result in ultrahigh carrier mobility and the potential for direction-dependent quantum devices. In this study, we systematically investigated the hydrogen evolution reaction (HER) catalytic activity of nitrogen-rich, non-precious BeN4 monolayer using first-principles DFT calculations. Our results demonstrate that BeN4 monolayer is thermally stable, and Be vacancy is the most energetically favorable site for hydrogen adsorption. We also found the Gibbs free energy (ΔGH∗) of H∗ coverage can be tuned to an optimal value of |ΔGH∗|≤ 0.2 eV through strain engineering, significantly enhancing the HER electrocatalytic activity of BeN4 monolayer. Furthermore, we examined both the homolytic Tafel reaction and heterolytic Heyrovsky reaction for HER mechanism using reaction kinetics and AIMD simulations. These findings can contribute to the development of high-performance, non-precious, and nitrogen-rich 2D catalysts for HER in future research.

Release of Pure H2 from Na[BH3(CH3NH)BH2(CH3NH)BH3] by Introduction of Methyl Substituents

Over the last 10 years, hydrogen-rich compounds based on five-membered boron–nitrogen chain anions have attracted attention as potential hydrogen storage candidates. In this work, we synthesized Na[BH3(CH3NH)BH2(CH3NH)BH3] through a simple mechanochemical approach. The structure of this compound, obtained through synchrotron powder X-ray diffraction, is presented here for the first time. Its hydrogen release properties were studied by thermogravimetric analysis and mass spectrometry. It is shown here that Na[BH3(CH3NH)BH2(CH3NH)BH3], on the contrary of its parent counterpart, Na[BH3NH2BH2NH2BH3], is able to release up to 4.6 wt.% of pure hydrogen below 150 °C. These results demonstrate that the introduction of a methyl group on nitrogen atom may be a good strategy to efficiently suppress the release of commonly encountered undesired gaseous by-products during the thermal dehydrogenation of B-N-H compounds.

Achieving Control over the Reduction/Coupling Dichotomy of N2 by Boron Metallomimetics

We report a detailed computational and experimental study of the fixation and reductive coupling of dinitrogen with low-valent boron compounds. Consistent with our mechanistic findings, the selectivity toward nitrogen fixation or coupling can be controlled through either steric bulk or the reaction conditions, allowing for the on-demand synthesis of nitrogen chains. The electronic structure and intriguing magnetic properties of intermediates and products of the reaction of dinitrogen with borylenes are also elucidated using high-level computational approaches.

Regional Analysis of Nitrogen Flow within the Chesapeake Bay Watershed Food Production Chain Inclusive of Trade.

In the Chesapeake Bay Watershed, excess nitrogen has contributed to poor water quality, leading to nitrogen mitigation efforts to restore and protect the watershed. The food production system is a top contributor to this nitrogen pollution. While the food trade plays a vital role in distancing the environmental impacts of nitrogen use from the consumer, previous work on nitrogen pollution and management in the Bay is yet to carefully consider the effect of embedded nitrogen found in products (nitrogen mass within the product) imported and exported throughout the Bay. Our work advances understanding across this area by creating a mass flow model of nitrogen embedded in the food production chain throughout the Chesapeake Bay Watershed that separates phases of the production and consumption processes for crops, live animals, and animal products and considers commodity trade at each phase by combining aspects of both nitrogen footprint and nitrogen budget models. Also, by tracking nitrogen embedded in products imported and exported in these processes, we distinguished between direct nitrogen pollution and nitrogen pollution externalities (displaced N pollution from other regions) from outside of the Bay. We developed the model for the watershed and all its counties for major agricultural commodities and food products for 4 years 2002, 2007, 2012, and 2017 with a specific focus on 2012. Using the developed model, we determined the spatiotemporal drivers of nitrogen loss to the environment from the food chain within the watershed. Recent literature leveraging mass balance approaches has suggested that previous long-term declines in nitrogen surplus and improvements in nutrient use efficiency have stagnated or begun to reverse. Our results suggest that within the Chesapeake Bay, increased corn and wheat acreage and steadily increasing livestock/poultry production may have led to the stagnation in decreasing N loss trends from agricultural production observed over the past two decades. We also show that at the watershed scale, trade has reduced the food chain nitrogen loss by about 40 million metric tons. This model has the potential to quantify the effect of various decision scenarios, including trade, dietary choices, production patterns, and agricultural practices, on the food production chain nitrogen loss at multiple scales. In addition, the model's ability to distinguish between nitrogen loss from local and nonlocal (due to trade) sources makes it a potential tool to optimize regional domestic production and trade to meet local watershed's needs while minimizing the resulting nitrogen loss.

Pengaruh Rendaman Air Gambut terhadap Durabilitas AC-WC

Puddles such as peat water on the surface of the bending pavement can accelerate the aging process, disintegration and cause damage. The purpose of the study was to determine the effect of the aging process due to peat water soaking on the durability of the AC-WC mixture penetration 60/70 based on the Cantabro test. Research methods are laboratory tests that start from the design of asphalt concrete mixtures, determining KAO, LTOA tests, peat water chemical element tests. Soak asphalt concrete with peat water for 0, 1, 2, 4, and 7 days, CL Test and Marshall test. 7-day duration CL value 23.6%, stability 1805 kg, IDP 37%, IDK 34%. The chemical reaction element that causes LTOA is the oxidation reaction of asphaltenes due to the increase of the element oxygen that removes nitrogen (N) and alkyl chains (R). The chemical reaction element that causes aging due to peat water, namely organic substances affect the pH value depending on the number of lignin compounds. Lignin produces H ions that can accelerate aging. The pH value of peat water is 3, Na 78.81 mg/l, Fe 0.47 mg/l, organic substances 148.52 mg/l.

Kinetic investigation of reactions of a 3-arylidene-2-thiohydantoin derivative with palladium (II) salts

1H NMR spectroscopy was used to monitor the reactions of an arylidene 2-thiohydantoin derivative, 3-((phenylmethylene)amino)-2-thioxo-4- imidazolidinone (3), with PdCl2, cis-[PdCl2(dmso-S)2] and K2[PdCl4] in DMSO-d6 in order to elucidate the reaction kinetics and mechanism. The 2-thiohydantoin derivative 3 formed cis-[Pd(3-N,S)(dmso-S)2]+ complex (5) in reactions with PdCl2 and cis-[PdCl2(dmso-S)2], while no reaction with K2[PdCl4] was observed. A two-step mechanism for the reactions of 3 with PdCl2 and cis-[PdCl2(dmso- S)2] is proposed, in which fast coordination to the side chain nitrogen occurs in the first step, while chelation and coordination to the sulfur atom in the 2- thiohydantoin ring is the second, slower, rate-determining step. The reaction rate constants were calculated and reactivities of the 2-thiohydantoin derivative 3 towards the palladium(II) salts were compared and discussed. Reaction of 3 with cis-[PdCl2(dmso-S)2] was faster than with PdCl2. The investigated palladium(II) salts also react with the solvent, DMSO-d6, and the influence of these side reactions on the outcome and kinetics of the 2-thiohydantoin derivative complexation reaction is discussed in detail. The obtained results of this study can have an impact in explanation of the coordination behavior of antitumor active palladium(II) and platinum(II) complexes

Investigation of the electronic and thermoelectric properties of nitrogen chains doping SWCNT: ab initio study

In this work, we have investigated the electronic and thermoelectric properties of CN, C2N2 and C4N2 nanotubes resulting from doping of nitrogen atoms, three and two N-zigzag chains on small (3,3) single walled carbon nanotube (SWCNT) respectivelly. All calculations were performed via DFT theory using WIEN2K code. The electronic structure calculations were done using GGA with TB-mBJ exchange potential, while the thermoelectric calculations were done using semi-classical Boltzmann transport theory. The results show that all structures are energetically stable. The electronic behaviour of (3,3) SWCNT transforms from semiconductor to metal in CN nanotube and to topological Weyl semimetal (WSM) state for C2N2 and C4N2 nanotubes. The calculations of thermoelectric properties, including electrical conductivity, Seebeck coefficient and power factor, reaveal that the N-doping enhances the thermoelectric properties of pristine nanotube. SWCNT with nitrogen doping has promising electronic and thermoelectric capabilities that make it a potential for electronic and thermoelectric devices.

Triazene-bridged energetic materials based on nitrotriazole: synthesis, characterization, and laser-ignited combustion performance.

Compared to the widely concerned azo bridges (-NN-), triazene bridges (-NN-NH-) with longer nitrogen chains are also favorable linking units leading to novel energetic materials. In this work, a new family of nitrogen-rich nitrotriazolate-based energetic compounds with a triazene bridge were synthesized and well characterized. The experimental results indicated that most of these new compounds have good thermal stabilities and low sensitivities. Among these, ammonium 5,5'-dinitro-3,3'-triazene-1,2,4-triazolate (3) and potassium 5-nitro-3,3'-triazene-1,2,4-triazolate (7) decomposed at a relatively high temperature (240.6 °C for 3 and 286.9 °C for 7). The impact sensitivities of the obtained compounds ranged from 15 J to 45 J. They also have relatively high positive heats of formation between 667.5 to 817.3 kJ mol-1. The calculated detonation pressures (P) were located between 23.7 and 34.8 GPa, and the calculated detonation velocities (D) were between 8011 and 9044 m s-1. Interestingly, ammonium 5-nitro-3,3'-triazene-1,2,4-triazolate (8) and hydroxylammonium 5-nitro-3,3'-triazene-1,2,4-triazole (10) possessed excellent laser-ignited combustion performance.

Prediction of erbium–nitrogen compounds as high-performance high-energy-density materials

To explore high-energy-density materials, intense attention has been focused on how to stabilize the N–N bond in nitrogen-rich compounds. Here, we report several stable phases of erbium–nitrogen compounds ErN x as high-energy-density materials. Specifically, the phase diagrams of stable high-pressure structures Immm-ErN2, C2-ErN3, P -ErN4, and P -ErN6, are theoretically studied by combining first-principles calculation with particle swarm optimization algorithm. In these erbium–nitrogen compounds, the N–N bonds are stabilized as diatomic quasi-molecule N2, helical-like nitrogen chains, armchair nitrogen chains, and armchair–anti-armchair nitrogen chains, respectively. Among them, the P -ErN6 harbors excellent stability at high thermal up to 1000 K. More importantly, the P -ErN6 has outstanding explosive performance with high-energy-density of 1.30 kJ g−1, detonation velocity of 10.87 km s−1, and detonation pressure of 812.98 kbar, which shows its promising application prospect as high-energy-density materials.

Unraveling Molecular Assembly and Tracking Lipid Droplet Dynamics Using Fluorescent Phenanthroimidazole Derivatives

Small strategic perturbations of the molecular structures impart significant variation in the evolution dynamics and properties of supramolecular self-assembled architectures. However, probing the in situ evolution dynamics of molecular assembly remains a challenge. Herein, we unraveled the real-time, early stage environment-sensitive dynamic molecular self-assembly processes and stimuli-induced reversible morphological transformation between supramolecular fibers and spherical nanoaggregates of alkyl chain-substituted phenanthroimidazole-based luminogen (BPIB1) through fluorescence lifetime imaging microscopy (FLIM). The presence of an octyl chain and basic nitrogen centers in BPIB1 led to a distinct self-assembly pattern. The gradual progression in the fluorescence lifetime provides a unique strategy for elucidating the dynamics of the self-assembly process leading to distinct nano/microarchitectures. Among the varied self-assembled structures, the smaller-sized (diameter ∼ 20–30 nm), highly photostable, water-dispersible, and biocompatible fluorescent nanoaggregates of BPIB1 were employed for tracking the dynamics of lipid droplets in live cells and a model organism, C. elegans, using fluorescence correlation spectroscopy and FLIM. Thus, a combined microscopic and spectroscopic approach demonstrated in the present study opens up new avenues to explore the formation pathways of diverse molecular aggregates and their use to decipher complex organelle dynamics.

Stable nitrogen-rich yttrium nitrides under high pressure

Polynitrides have excellent physical and chemical properties as well as have drawn wide attention. Through the first-principles calculations and CALYPSO structure searching approach, we calculated the overall structure of YN components (from 0.5 to 10) and established the pressure versus composition diagram and pressure versus structure phase diagram of the YN system. This paper focuses on the YN2 structure (space group P21) which can be stable at 0 GPa and the YN10 structure with the highest nitrogen content (space group Imm2) with the intriguing chain-like N10 cage structure appears. Under ambient conditions, the YN10 structure has a high energy density (9.33 kJ g−1). By calculating the phonon dispersion curve, the structure has better dynamic stability at 250 GPa. Seven structures (Y2N, YN, YN2, YN3, YN5, YN8, YN10) that appear on convex hull graphs in all YN systems are also calculated. Their dynamics, mechanics and related electronic properties are described in the appendix. We hope that our theoretical research can facilitate future experimental realization and help to advance the research on nitrogen chains.

High switching ratio and inorganic gas sensing performance in BeN4 based nanodevice: a first-principles study

Recently, Dirac material BeN4 has been synthesized by using laser-heated diamond anvil-groove technology (Bykov et al 2021 Phys. Rev. Lett. 126 175501). BeN4 layer, i.e. beryllonitrene, represents a qualitatively class of two-dimensional (2D) materials that can be built of a metal atom and polymeric nitrogen chains, and hosts anisotropic Dirac fermions. Enlighten by this discovered material, we study the electronic structure, anisotropic transport properties and gas sensitivity of 2D BeN4 using the density functional theory combined with non-equilibrium Green’s function method. The results manifest that the 2D BeN4 shows a typical semi-metallic property. The electronic transport properties of the intrinsic BeN4 devices show a strong anisotropic behavior since electrons transmitting along the armchair direction is much easier than that along the zigzag direction. It directly results in an obvious switching characteristic with the switching ratio up to 105. Then the adsorption characteristics indicate that H2S, CO, CO2 and H2 molecules are physisorption, while the NH3, NO, NO2, SO2 molecules are chemisorption. Among these chemisorption cases, the 2D gas sensor devices show an extremely high response for SO2 recognition, and the high anisotropy of the original 2D BeN4 device still maintains after adsorbing gas molecules. Finally, high switching ratio and inorganic gas sensing performance of BeN4 monolayer could be clearly understood with local density of states, bias-dependent spectra, scattered state distribution. In general, the results indicate that the designed BeN4 devices have potential practical application in high-ratio switching devices and high gas-sensing molecular devices.