Nickel Center Research Articles

Radical‐driven imine hydrogenation promoted by the cooperativity of nickel and a redox‐active ligand

In the case of N‐alkylation reaction via borrowing hydrogen (BH) methods, imine hydrogenation is one of the critical steps. Mechanistically, the majority of imine hydrogenation, either by dihydrogen gas or by alcohol in case of BH methods, follow two‐electron chemistry, where a metal‐hydride intermediate plays a pivotal role. Herein we demonstrate a completely complementary protocol, where the hydrogenation is governed by a radical pathway. Such a pathway is adopted from the redox active nature of the azophenolate ligand backbone. The facile and reversible 2e‐/2H+, azo/hydrazo redox couple in a nickel catalyst helps in storing the hydrogen from alcohol dehydrogenation. An imine substrate is reduced by one‐electron from the azo motif with the assistance of the nickel center. The reduced imine drives a critical hydrogen atom transfer step from the hydrazo motif to conduct the hydrogenation. A set of kinetics experiments including Eyring analysis, radical inhibition experiment along with computational probation attest for the radical‐promoted hydrogenation mechanism.

A Paramagnetic Nickel–Zinc Hydride Complex

AbstractReaction of a molecular zinc–hydride [{(ArNCMe)2CH}ZnH] (Ar=2,6‐di‐isopropylphenyl) with 0.5 equiv. of [Ni(CO)Cp]2 led to the isolation of a nickel–zinc hydride complex containing a bridging 3‐centre,2‐electron Ni−H−Zn interaction. This species has been characterized in the solid‐state by single crystal X‐ray diffraction. DFT calculations are consistent with its formulation as a σ‐complex derived from coordination of the zinc–hydride to a paramagnetic nickel(I) fragment. Continuous‐wave and pulse EPR experiments suggest that this species is labile in solution. Further experiments show that in the presence of catalytic quantities of nickel(I) precursors, zinc–hydride bonds can undergo either H/D‐exchange with D2 or dehydrocoupling to form Zn−Zn bonds. In combination, the data support the activation and functionalisation of zinc–hydride bonds at nickel(I) centres.

Small Molecule Activation at the acriPNP Pincer-Supported Nickel Sites.

ConspectusNickel pincer systems have recently attracted much attention for applications in various organometallic reactions and catalysis involving small molecule activation. Their exploration is in part motivated by the presence of nickel in natural systems for efficient catalysis. Among such systems, the nickel-containing metalloenzyme carbon monoxide dehydrogenase (CODH) efficiently and reversibly converts CO2 to CO at its active site. The generated CO moves through a channel from the CODH active site and is transported to a dinuclear nickel site of acetyl-coenzyme A synthase (ACS), which catalyzes organometallic C-S and C-C bond forming reactions. An analogous C-S bond activation process is also mediated by the nickel containing enzyme methyl-coenzyme M reductase (MCR). The nickel centers in these systems feature sulfur- and nitrogen-rich environments, and in the particular case of lactate racemase, an organometallic nickel pincer motif revealing a Ni-C bond is observed. These bioinorganic systems inspired the development of several nickel pincer scaffolds not only to mimic enzyme active sites and their reactivity but also to further extend low-valent organonickel chemistry. In this Account, we detail our continuing efforts in the chemistry of nickel complexes supported by acridane-based PNP pincer ligands focusing on our long-standing interest in biomimetic small molecule activation. We have employed a series of diphosphinoamide pincer ligands to prepare various nickel(II/I/0) complexes and to study the conversion of C1 chemicals such as CO and CO2 to value-added products. In the transformation of C1 chemicals, the key C-O bond cleavage and C-E bond (E = C, N, O, or S, etc.) formation steps typically require overcoming high activation barriers. Interestingly, enzymatic systems overcome such difficulties for C1 conversion and operate efficiently under ambient conditions with the use of nickel organometallic chemistry. Furthermore, we have extended our efforts to the conversion of NOx anions to NO via the sequential deoxygenation by nickel mediated carbonylation, which was applied to catalytic C-N coupling to produce industrially important organonitrogen compound oximes as a strategy for NOx conversion and utilization (NCU). Notably, the rigidified acriPNP pincer backbone that enforces a planar geometry at nickel was found to be an important factor for diversifying organometallic transformations including (a) homolysis of various σ-bonds mediated by T-shaped nickel(I) metalloradical species, (b) C-H bond activation mediated by a nickel(0) dinitrogen species, (c) selective CO2 reactivity of nickel(0)-CO species, (d) C-C bond formation at low-valent nickel(I or 0)-CO sites with iodoalkanes, and (e) catalytic deoxygenation of NOx anions and subsequent C-N coupling of a nickel-NO species with alkyl halides for oxime production. Broadly, our results highlight the importance of molecular design and the rich chemistry of organonickel species for diverse small molecule transformations.

Dithiodipropionate and Fumarate Ni, Cu, and Zn Mixed Ligand Complexes

Three nickel, copper, and zinc complexes with dicarboxylic acids (3,3′-dithiodipropionic acid (H2dtdp) and fumaric acid (H2fu)) and N-donor ligands (1,10-phenanthroline (phen), N′–methyldipropylenetriamine (mdpta), and N,N,N′,N″,N″-pentamethyldiethylenetriamine (pmdien)) were synthesized. These complexes were characterized using elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Interestingly, [Ni(dtdp)(phen)(H2O)3]∙0.5H2O (1) is a mononuclear complex, where the dtdp dianion employs only one carboxylate group for coordination to the central nickel atom. [(ClO4)(mdpta)Cu(μ-dtdp)Cu(mdpta)(H2O)](ClO4) (2) is a dinuclear copper complex with a dtdp bridge and different coordination on the copper center. [{Zn(pmdien)(H2O)}2(μ-fu)](ClO4)2 (3) is a symmetric dimer with a bridging fumarate ligand. These coordination compounds were tested for their antibacterial activities on Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Enterococcus faecalis bacteria strains. All the complexes show moderate activities on the mentioned strains.

Theoretical Study on the Disparate Spatial Arrangement of 3’,4’,5,7-tetrahydroxy-3-flavene Towards Jack Bean Urease Enzyme Active Site

Urease enzyme plays crucial role in the hydrolysis of urea. Excessive hydrolysis of urea can have significant impacts on the environment. In recent years, there has been growing interest in identifying natural compounds that can inhibit urease activity. Flavonoids, phytochemical compounds present in plants, have shown promising potential as urease inhibitors. Studies have revealed that certain flavonoids, such as 3’,4’,5,7-tetrahydroxy-3-flavene, abbreviated as H4FLA for convenient, exhibit potent inhibition of urease, surpassing the efficacy of well-known synthetic inhibitors. In the present study, we report quantum mechanical calculations that mainly investigate the interaction of H4FLA towards urease at disparate spatial arrangement. It was found that the most favourable position between H4FLA and active site of urease has interaction energy of -3.80 eV. Topology analysis revealed that there is no typical covalent bond found between atoms involved in the interaction. Only weak interactions were detected. The hydroxyl groups with highest (negative) local potential throughout the structure, contribute mainly to the formation of non-covalent interaction with the nickel centers, indicating their potential involvement in the inhibitory activity of flavonoids against urease.

Heterodinuclear AuNi(CO)n- (n = 2-3) Complexes Featuring an Anionic Au- as a Donor Ligand for Ni(CO)n.

The gas-phase heterodinuclear gold-nickel carbonyl AuNi(CO)n- (n = 2-3) anion complexes were mass-selected and studied by using photoelectron velocity-map imaging spectroscopy in combination with quantum-chemical calculations, which can establish both the geometries and electronic structures of these anions. These complexes are all confirmed to be singlet ground states with one gold atom bonded at the central nickel atom of the Ni(CO)n moieties. Further bonding analyses indicate that unlike the alkali-metals as covalently bonded ligands to form the electron-sharing alkali-metal-nickel bonding in the alkali-metal-nickel carbonyl anionic complexes, the Au atom in the AuNi(CO)n- complexes serves as a datively bound ligand for Ni(CO)n to form gold-to-nickel dative bonding.

Highly dispersed and stable Schiff base nickel catalyst on multi-walled carbon nanotubes promote ethylene oligomerization

α-Olefins are essential chemical raw materials in the synthesis of emulsifiers, plasticizers, and other value-added chemicals, and ethylene oligomerization is the main method used for preparing α-olefins. However, catalysts employed in ethylene oligomerization have drawbacks such as poor selection of target products, catalyst particle aggregation, and deactivation. To prevent the aggregation of the catalyst and expose a large number of active sites, we propose an anchoring strategy to stabilize and uniformly disperse catalysts on multi-walled carbon nanotubes (MWCNTs). Hybrid catalysts (SCn@MWCNTs) fabricated using the strategy exhibited considerably higher catalytic performance compared with homogeneous Schiff base nickel catalysts (SCn) owing to the combined effects of MWCNTs and active nickel centers. Under optimal catalytic conditions (temperature: 25 °C; Al/Ni molar ratio: 500 (SCn); Al/Ni molar ratio: 700 (SCn@MWCNTs); pressure: 0.7 MPa), the activities of SC1 and SC1@MWCNTs were 6.56 × 104 and 8.25 × 104 g/(mol Ni·h), respectively. In particular, SC1@MWCNTs showed remarkable recyclability and catalytic stability.

A Paramagnetic Nickel-Zinc Hydride Complex.

Reaction of a molecular zinc-hydride [{(ArNCMe)2CH}ZnH] (Ar = 2,6-di-isopropylphenyl) with 0.5 equiv. of [Ni(CO)Cp]2 led to the isolation of a nickel-zinc hydride complex containing a bridging 3-centre,2-electron Ni-H-Zn interaction. This species has been characterized in the solid-state by single crystal X-ray diffraction. DFT calculations are consistent with its formulation as a σ-complex derived from coordination of the zinc-hydride to a paramagnetic nickel(I) fragment. Continuous wave and pulse EPR experiments suggest that this species is not stable in solution and suggest that this species is labile in solution. Further experiments show that in the presence of catalytic quantities of nickel(I) precursors, zinc-hydride bonds can undergo either H/D-exchange with D2 or dehydrocoupling to form Zn-Zn bonds. In combination, the data support the activation and functionalisation of zinc-hydride bonds at nickel(I) centres.

Sporadic binding of perchlorate and dicyanamide ions in trinuclear CuII2NiII complexes with a reduced di-Schiff base ligand: Synthesis, structures and spectral properties

Two new unusual trinuclear linear heterometallic complexes, [(CuLR)2Ni(ClO4)2{CO(CH3)2}2]·0.17H2O (1) and [(CuLR)2Ni(N3C2)2(0.5CH3OH)2] (2) have been synthesized by using [CuLR] as a “metalloligand” (where H2LR=N,N′-bis(2-hydroxybenzyl)-1,3-propanediamine) in presence of anions perchlorate and dicyanamide, respectively. Both the complexes have been diagnosed by elemental analysis, spectroscopic investigations, and single crystal XRD study. In these complexes, the terminal “ligand complex” [CuLR] coordinates to the central nickel atom via double phenoxido oxygen atoms bridge, resulted in a linear trinuclear structures. In both structures, the anions (perchlorate for 1 and dicyanamide for 2) coordinate to the terminal Cu(II) centers of the trinuclear unit (Cu(II)-Ni(II)-Cu(II)) to complete the distorted octahedral geometry around Cu(II); whereas the central Ni(II) metal ion remains in square planar geometry. The binding of perchlorate or dicyanamide to the terminal Cu(II) instead of central Ni(II) ion is rather unusual compared to the complexes of analogous unreduced species.

2‐Pyridinyl/quinolyl‐phenylamino‐quinoline Complexes With CF3 and C2F5 Ligated Ni

A new ligand architecture based on quinoline/pyridine attached ortho to the amine functionality on an aniline, which is coupled to another quinoline unit has been prepared. Ligands L1 and L2 have been complexed with CF3 and C2F5 ligated nickel centers. The resulting complexes have been extensively studied by NMR spectroscopy (on 1H, 13C{1H}, and 19F nuclei) and single‐crystal X‐ray crystallography. A poorly defined mixture of complexes obtained from L1 and nickel bis‐trifluoromethyl complex was moderately active in C‐H trifluoromethylation with the Umemoto I reagent.

Spontaneous dispersion of metallic nickel centers in inert metal substrate for the selective hydrogenation of carbon-carbon triple bonds

Spontaneous dispersion of metallic nickel centers in inert metal substrate for the selective hydrogenation of carbon-carbon triple bonds

Ethylene Polymerizations Catalyzed by Fluorinated "Sandwich" Diimine-Nickel and Palladium Complexes.

Nickel and palladium complexes bearing "sandwich" diimine ligands with perfluorinated aryl caps have been synthesized, characterized, and explored in ethylene polymerization reactions. The X-ray crystallographic analysis of the precatalysts 16 and 6b shows differences from their nonfluorinated analogues 17 and 19, with the perfluorinated aryl caps centered precisely over the nickel and palladium centers, which results in higher buried volumes of the metal centers relative to the nonfluorinated analogues. The sandwich diimine-palladium complexes 5a and 5b containing perfluorinated aryl caps polymerize ethylene in a controlled fashion with activities that are substantially increased compared with their nonfluorinated analogues. Migratory insertion rates in relevant methyl ethylene complexes agree with the activities exhibited in bulk polymerization experiments. DFT studies suggest that facility of ethylene rotation from its preferred orientation perpendicular to the Pd-alkyl bond into a parallel in-plane conformation contributes to the higher polymerization activity for 5b relative to 18a. For these palladium systems, polymer molecular weights can be controlled via hydrogen addition (hydrogenolysis), which is unusual for late-transition-metal-catalyzed olefin polymerizations with no catalyst deactivation occurring. Sandwich diimine-nickel complexes 6a and 6b with perfluorinated aryl caps show ethylene polymerization activities that are about half of those of classical tetraisopropyl-substituted catalyst 2 but again are more active than the analogous nonfluorinated sandwich complexes. Ethylene polymerizations exhibit living behavior, and branched ultrahigh-molecular-weight polyethylenes (UHMWPEs) with very low-molecular-weight distributions (less than 1.1) are obtained. The activated nickel catalysts are stable in the absence of monomer and show good long-term stability at 25 °C.

Synthesis, structure, and mechanism of action of a unique mixed-ligand nickel (II)-complex of tetra-dentate phenol-based ligand with di-aquo co-ligands with significant pro-apoptotic and anti-metastatic effect against malignant human cancer cells

From the discovery of the anticancer activity of “cisplatin”, various type of numerous mononuclear platinum (II) complexes has been evaluated for antitumor activities, though therapeutic use is limited due to side effects and resistance. In this study, A unique mixed ligand mono nuclear octahedral Ni (II) complex [NiL(H2O)2].0·.5H2O (1) [H2L = N,Nʹ-dimethyl-N,Nʹ-bis (2-hydroxy-3,5-di methyl benzyl)-ethylenediamine] with tetra dentate phenol based ligand with N2O2 donor environment along with two labile water molecules was synthesised. The complex (1) is structurally characterized by spectroscopic tools including single-crystal X-ray diffractometer. Complex (1) crystallizes in monoclinic space group P21/n with a = 10.4871(17) Å, b = 20.860 (4) Å and c = 20.955(4) Å. The UV – visible spectra show two peaks around 507 nm and 367 nm due to spin-allowed 1A1g → 1A2g and 1A1g → 1B1g transitions respectively as expected for a square planar d8 system. Mixed ligand octahedral nickel (II) complex with facially coordinating tetra dentate phenol-based ligand (H2L) is in association with two water molecule as ancillary ligand. Two water molecules associated with coordination zone of nickel (II) centre is loosely bound. In this present study, we have evaluated the anti-cancer properties of Complex (1). We found that Complex (1) show potent cancer cell killing activity in case of poorly invasive mice and human cancer cell lines. Complex (1) trigger apoptosis chiefly via p53 dependent pathway. Complex (1) also inhibits cancer cell migration and epithelial to mesenchymal transition in case of metastatic breast cancer cells suggesting potent anti-cancer properties of complex (1).

DNA and bovine serum albumin protein (BSA) interaction of antitumor supramolecular nickel(II) complex: Inference for drug design

To explore the therapeutic potential of supramolecular nickel(II) Schiff base self-assemble complexes, the Schiff base ligand (N, N′-bis(salicylidene)-1,3-diamino-2-propanol) and its Ni(II) complex [Ni2(H2L)2(NCS)2(CH3OH)2](CH3OH)2 were synthesized. Characterization by X-ray crystallography (for the complex), FT-IR, UV–Vis spectroscopy, 1HNMR and elemental analysis (CHN) were performed. Single-crystal X-ray structure of the complex exhibited a distorted octahedral geometry in which each nickel(II) center, in the asymmetric unit, was six coordinated with three N atoms and three O atoms (from Schiff base ligand, methanol and NCS). In vitro Fish Sperm DNA (FS-DNA) and Bovine Serum Albumin (BSA) binding studies of the complex employed UV–Vis and fluorescence spectroscopy, cyclic voltammetry, viscosity measurement and molecular docking. The complex indicated a good binding propensity to BSA and was also bound to FS-DNA, preferably via intercalation. The outputs of the molecular docking study confirmed the experimental results. The complex was found to exert high anticancer activity against the gastric and prostate cancerous cells with putative selective anticancer properties. The death-induced mechanism underlying the complex is mainly related to the intercalator interactions, which may result in apoptosis-programmed cell death.

First-Principles Study of Adsorption of CH4 on a Fluorinated Model NiF2 Surface.

Electrochemical fluorination on nickel anodes, also known as the Simons' process, is an important fluorination method used on an industrial scale. Despite its success, the mechanism is still under debate. One of the proposed mechanisms involves higher valent nickel species formed on an anode acting as effective fluorinating agents. Here we report the first attempt to study fluorination by means of first principles investigation. We have identified a possible surface model from the simplest binary nickel fluoride (NiF2). A twice oxidized NiF2(F2) (001) surface exhibits higher valent nickel centers and a fluorination source that can be best characterized as an [F2]- like unit, readily available to aid fluorination. We have studied the adsorption of CH4 and the co-adsorption of CH4 and HF on this surface by means of periodic density functional theory. By the adsorption of CH4, we found two main outcomes on the surface. Unreactive physisorption of CH4 and dissociative chemisorption resulting in the formation of CH3F and HF. The co-adsorption with the HF gave rise to four main outcomes, namely the formation of CH3F, CH2F2, CH3 radical, and also physisorbed CH4.

Trivalent Cations Slow Electron Transfer to Macrocyclic Heterobimetallic Complexes.

Incorporation of secondary redox-inactive cations into heterobimetallic complexes is an attractive strategy for modulation of metal-centered redox chemistry, but quantification of the consequences of incorporating strongly Lewis acidic trivalent cations has received little attention. Here, a family of seven heterobimetallic complexes that pair a redox-active nickel center with La3+, Y3+, Lu3+, Sr2+, Ca2+, K+, and Na+ (in the form of their triflate salts) have been prepared on a heteroditopic ligand platform to understand how chemical behavior varies across the comprehensive series. Structural data from X-ray diffraction analysis demonstrate that the positions adopted by the secondary cations in the crown-ether-like site of the ligand relative to nickel are dependent primarily on the secondary cations' ionic radii and that the triflate counteranions are bound to the cations in all cases. Electrochemical data, in concert with electron paramagnetic resonance studies, show that nickel(II)/nickel(I) redox is modulated by the secondary metals; the heterogeneous electron-transfer rate is diminished for the derivatives incorporating trivalent metals, an effect that is dependent on steric crowding about the nickel metal center and that was quantified here with a topographical free-volume analysis. As related analyses carried out here on previously reported systems bear out similar relationships, we conclude that the placement and identity of both the secondary metal cations and their associated counteranions can afford unique changes in the (electro)chemical behavior of heterobimetallic species.

Electrochemical Nickel‐Catalyzed Hydrogenation

AbstractOlefin hydrogenation is one of the most important transformations in organic synthesis. Electrochemical transition metal‐catalyzed hydrogenation is an attractive approach to replace the dangerous hydrogen gas with electrons and protons. However, this reaction poses major challenges due to rapid hydrogen evolution reaction (HER) of metal‐hydride species that outcompetes alkene hydrogenation step, and facile deposition of the metal catalyst at the electrode that stalls reaction. Here we report an economical and efficient strategy to achieve high selectivity for hydrogenation reactivity over the well‐established HER. Using an inexpensive and bench‐stable nickel salt as the catalyst, this mild reaction features outstanding substrate generality and functional group compatibility, and distinct chemoselectivity. In addition, hydrodebromination of alkyl and aryl bromides could be realized using the same reaction system with a different ligand, and high chemoselectivity between hydrogenation and hydrodebromination could be achieved through ligand selection. The practicability of our method has been demonstrated by the success of large‐scale synthesis using catalytic amount of electrolyte and a minimal amount of solvent. Cyclic voltammetry and kinetic studies were performed, which support a NiII/0 catalytic cycle and the pre‐coordination of the substrate to the nickel center.

Electrochemical Nickel-Catalyzed Hydrogenation.

Olefin hydrogenation is one of the most important transformations in organic synthesis. Electrochemical transition metal-catalyzed hydrogenation is an attractive approach to replace the dangerous hydrogen gas with electrons and protons. However, this reaction poses major challenges due to rapid hydrogen evolution reaction (HER) of metal-hydride species that outcompetes alkene hydrogenation step, and facile deposition of the metal catalyst at the electrode that stalls reaction. Here we report an economical and efficient strategy to achieve high selectivity for hydrogenation reactivity over the well-established HER. Using an inexpensive and bench-stable nickel salt as the catalyst, this mild reaction features outstanding substrate generality and functional group compatibility, and distinct chemoselectivity. In addition, hydrodebromination of alkyl and aryl bromides could be realized using the same reaction system with a different ligand, and high chemoselectivity between hydrogenation and hydrodebromination could be achieved through ligand selection. The practicability of our method has been demonstrated by the success of large-scale synthesis using catalytic amount of electrolyte and a minimal amount of solvent. Cyclic voltammetry and kinetic studies were performed, which support a NiII/0 catalytic cycle and the pre-coordination of the substrate to the nickel center.

Regulating Access to Active Sites via Hydrogen Bonding and Cation-Dipole Interactions: A Dual Cofactor Approach to Switchable Catalysis.

Hydrogen bonding networks are ubiquitous in biological systems and play a key role in controlling the conformational dynamics and allosteric interactions of enzymes. Yet in small organometallic catalysts, hydrogen bonding rarely controls ligand binding to the metal center. In this work, a hydrogen bonding network within a well-defined organometallic catalyst works in concert with cation-dipole interactions to gate substrate access to the active site. An ammine ligand acts as one cofactor, templating a hydrogen bonding network within a pendent crown ether and preventing the binding of strong donor ligands, such as nitriles, to the nickel center. Sodium ions are the second cofactor, disrupting hydrogen bonding to enable switchable ligand substitution reactions. Thermodynamic analyses provide insight into the energetic requirements of the different supramolecular interactions that enable substrate gating. The dual cofactor approach enables switchable catalytic hydroamination of crotononitrile. Systematic comparisons of catalysts with varying structural features provide support for the critical role of the dual cofactors in achieving on/off catalysis with substrates containing strongly donating functional groups that might otherwise interfere with switchable catalysts.

Nickel(I)-catalysed multicomponent reductive hydrocarbonylation of alkenes: A theoretical study of mechanism, regio-, enantio-, and chemoselectivity

In the present study, theoretical calculations were performed to gain a deeper understanding of the nickel-catalysed multicomponent reductive hydrocarbonylation of alkenes using ethyl chloroformate as the CO source and hydrosilane as the hydride source. The computations show Ni(I) species acts as the active catalyst entering the catalytic cycle. The calculated mechanism corroborates the experimental mechanistic proposals on the elementary steps. Nonetheless, the sequence of elementary steps and the oxidation state of the nickel center are different from the experimental proposal. The calculations reproduced quite well the experimentally observed regio- and enantioselectivity. The distortion/interaction analysis and frontier molecular orbital theory confirm that the interaction energy determines the regioselectivity. The high S-enantioselectivity arises from the stronger C–H/π interactions in the S-configuration compared to those in the R-type enantiomer. One of the biggest challenges faced by multicomponent reactions is competing side-reactions. To explore the reaction's chemoselectivity, we calculated the formation mechanisms of five potential by-products and analyzed the driving force behind the formation of the desired product.