Neutral Point Voltage Research Articles

Model predictive power control for grid-tied T-type three-level quasi-Z-source inverter with low complexity

Abstract The appealing design known as T-type three-level quasi-Z-source inverters (T2LQZSI) can function in both step-down and step-up modes. Model predictive control for converters has also received a lot of interest. This article suggests a low-complexity model predictive power control for T-type quasi-Z-source inverters with neutral-point voltage (NP-V) balance to address the shortcomings of conventional model predictive control and achieve improved performance. The resulting voltage is produced by using a variety of vectors. For NP-V balance, the tiny vector is employed. In addition, a strong optimum sector selection approach is suggested, which significantly lowers the processing complexity. Results from experiments show how effective and better the suggested technique is.

A Modified Carrier-Based PWM Strategy for Common Mode Voltage Elimination and Neutral Point Voltage Balance in a Unidirectional Three-Level Converter for AC Motor Drives

A Modified Carrier-Based PWM Strategy for Common Mode Voltage Elimination and Neutral Point Voltage Balance in a Unidirectional Three-Level Converter for AC Motor Drives

Neutral-Point Voltage Regulation and Control Strategy for Hybrid Grounding System Combining Power Module and Low Resistance in 10 kV Distribution Network

Neutral-Point Voltage Regulation and Control Strategy for Hybrid Grounding System Combining Power Module and Low Resistance in 10 kV Distribution Network

A Carrier-Based Discontinuous Space-Vector PWM for Common-Mode Voltage Reduction in Dual-Input Three-Level T-Type Inverters With Unbalanced Neutral-Point Voltages

A Carrier-Based Discontinuous Space-Vector PWM for Common-Mode Voltage Reduction in Dual-Input Three-Level T-Type Inverters With Unbalanced Neutral-Point Voltages

Research on a New Inverter Control Strategy of Induction Heating Power Supply

To achieve “high voltage, low current” in the induction heating power circuit, enhance the flexibility of component selection in the circuit, and improve the quality of the inverter’s output waveform, a new control strategy of a single-phase NPC three-level inverter with unipolar frequency-doubling SPWM method is proposed. With the series connection of IGBTs in a single-phase NPC three-level inverter, the voltage withstand requirement of IGBT is reduced by half. The middle four IGBTs are controlled using unipolar frequency-doubling SPWM, while the outer four IGBTs are turned on later and turned off earlier to address the neutral point voltage imbalance issue in the inverter. Simulation results show that, compared with the traditional bipolar SPWM-controlled single-phase full-bridge inverter, the DC-side input voltage of the inverter can be double, and the current flowing through the entire circuit can be halved under the same output power using the proposed method.

An improved CB-DPWM strategy with NP voltage balance and switching loss reduction for 3-L NPC converter

Abstract The three-level (3-L) neutral-point-clamped (NPC) converter has found widespread applications in various fields, due to its simple structure, low failure rate and high efficiency. However, the 3-L NPC converter suffers the issue of unbalanced neutral-point (NP) voltage due to the divided two dc-side capacitors. The large NP voltage ripple and offset Based on the detailed analysis of the effects of vectors and clamping patterns on the NP voltage, a discontinuous optimized modulation method for NPC grid-connected inverter with both low switching loss and ability to balance NP voltage is presented. By measuring NP voltage and utilizing the property that superfluous clamping patterns have opposing effects on the NP voltage, the modulation method adjusts the NP voltage with the injection of various zero sequence voltages (ZSV) into the original sinusoidal waves. The results of this study demonstrate that the CB-DPWM can control the NP voltage balanced and decrease switching loss compared to conventional DPWM and SVPWM strategies. Moreover, the CB-DPWM strategy does not need to identify sectors and subsectors or calculate dwelling times. This modulation strategy effectively suppresses low-frequency fluctuations and deviations of the NP voltage with the injection of a simple ZSV, and improves the power quality of the output voltages and currents. Compared to the traditional SVPWM scheme, the suggested CB-DPWM has a 27 % lower overall IGBT loss. Moreover, this method is implemented through carrier waves, which is simpler than modulation schemes based on space vector, greatly shortens the program running time, and is conducive to engineering implementation.

A hybrid carrier‐based discontinuous PWM with neutral‐point voltage ripple and current distortion reduction for Vienna rectifier

AbstractThe three‐level Vienna rectifier is widely used in industrial applications, such as electric vehicle charging systems and telecommunication power systems. Discontinuous pulse width modulation (DPWM) is widely used in three‐level AC/DC converters due to its features of switching loss minimization. However, the problems of neutral‐point voltage ripple, current zero‐crossing distortion, and switching losses are mutually coupled for the Vienna rectifier. To address these issues, a hybrid carrier‐based discontinuous pulse width modulation (HCB‐DPWM) with reduced neutral‐point (NP) voltage ripple and current distortion is proposed. First, the /6 clamping period of the conventional DPWM is divided into three‐type clamping intervals, which reduce NP voltage ripple with shortened clamping period. Then, the elimination of current distortion around the current zero‐crossing point and the switching loss reduction are investigated. The implementation of the proposed HCB‐DPWM is given in detail. Finally, the simulation and experimental results of the Vienna rectifier are presented to validate the performance that the proposed HCB‐DPWM can eliminate current zero‐crossing distortion and reduce neutral‐point voltage ripple with different modulation indices.

A DC Offset Reduction of Neutral Point Voltage Strategy Based on Vector Phase Angle Difference Optimization for Vienna Rectifier With Bipolar DC Bus

A DC Offset Reduction of Neutral Point Voltage Strategy Based on Vector Phase Angle Difference Optimization for Vienna Rectifier With Bipolar DC Bus

Alleviation of Leakage Current and Neutral Point Voltage Deviation for Using an Eight-Switch Inverter

Alleviation of Leakage Current and Neutral Point Voltage Deviation for Using an Eight-Switch Inverter

Double closed loop PI control with full compensation arc elimination based on zero sequence voltage of neutral point

Aiming at the problem of zero sequence voltage generated by unbalance parameters of line to ground, which affects arc suppression effect of grounding fault of controllable voltage source. By analyzing the influence of ground unbalance parameters on the arc suppression effect of controllable voltage source under different grounding modes, the mechanism of full compensation arc suppression based on zero sequence voltage of neutral point is revealed, and on this basis, a fully compensated arc suppression model of controllable voltage source controlled by double closed loop PI is established, and the deviation control is carried out by using the neutral voltage of distribution network and the voltage of fault phase supply. The residual voltage ring adopts the ground fault phase residual voltage for closed loop control. The simulation results show that the dual-closed-loop PI control algorithm can continuously stabilize the output waveform of the controllable voltage source. When the transition resistance is 0.1 ~ 10 kΩ, the residual voltage stabilization time of the independent controllable voltage source grounding method is 43 ms ~ 2.4 s, and the parallel arc suppression coil grounding method is 43 ms ~ 4.7 s. The proposed dual closed-loop PI control method for neutral point voltage deviation and fault residual voltage can stabilize the residual voltage of the grounded fault phase to below 10 V, forcing reliable arc extinction at the grounded fault point, exhibiting good stability. Low-voltage simulation tests have also proved the feasibility of the algorithm.

Fast and Accurate Neutral-Point Voltage Control Under Balanced and Unbalanced Neutral-Point Voltage for Coupled Ten-Switch Three-Phase Three-Level Inverter

Fast and Accurate Neutral-Point Voltage Control Under Balanced and Unbalanced Neutral-Point Voltage for Coupled Ten-Switch Three-Phase Three-Level Inverter

An Active Voltage-Type Grounding Fault Protection Method for Medium-Voltage Distribution Networks With Neutral Point Voltage Flexible Regulation

An Active Voltage-Type Grounding Fault Protection Method for Medium-Voltage Distribution Networks With Neutral Point Voltage Flexible Regulation

Noninvasive Online Capacitor Monitoring Method for Three-Level Converter Based on Active Neutral-Point Current Adjustment

Capacitor monitoring is one of the effective measures to assess the health status of power converters. Although some conventional methods have been proposed, they require adding auxiliary current sensors, changing operation conditions, or deteriorating the output performance. The lack of noninvasive online capacitor monitoring methods is a great problem in an AC/DC/AC system. To address this urgent need, this article proposes a truly noninvasive online capacitor monitoring method specifically for three-level neutral-point-clamped converters. The word “noninvasive” means no additional sensors, no changes to operation conditions, and little influence on the output performance. It monitors capacitors by actively adjusting the neutral-point (NP) current to induce a ripple in the NP voltage. Then, it reconstructs the injected NP current based on the switching states and three-phase currents, and obtains the response ripple in the NP voltage through a recursive least square (RLS) filter. Finally, according to the relationship between the injected NP current and the response ripple in the NP voltage, it estimates the capacitance simply via a RLS observer. Both numerical simulation and experimental results are provided as well to verify the correctness and feasibility of the proposed method.

A unified SVPWM fault tolerant control algorithm for single leg fault reconstruction topology of two-level inverter

To improve the reliability of Two-level three phase voltage source inverters, a uniform fault tolerant strategy based on space vector pulse width modulation is proposed for different leg faults. The reconstructed topologies of inverters with different bridge arm faults are different, which makes the basic voltage vector phase of each reconstructed topology inconsistent, resulting in different calculations. Therefore, the coordinate transformation is applied to place the basic voltage vectors of each reconstructed topology on the synchronous stationary αβ coordinate system so that the calculations of the reconstructed topology under different bridge arm faults are unified, thus reducing the complexity of fault-tolerant control. Aiming at the three-phase current asymmetry caused by the neutral point voltage oscillation in inverter topology reconstruction, a transient compensation method of neutral point voltage offset for the α-axis component of the reference voltage vector is introduced to suppress the adverse effects. The compensation method directly offers a neutral point voltage offset value after Clarke transformation and corrects the α-axis component of the reference voltage vector, avoiding the integral calculation in the conventional voltage compensation algorithm. The correctness and effectiveness of the proposed fault-tolerant control strategy are verified experimentally.

Optimization of the Symmetrical SVPWM for Three-Level T-Type Inverters With Unbalanced and Oscillated Neutral-Point Voltages

The symmetrical space-vector pulse-width-modulation (SVPWM) has been widely adopted in three-level (3L) T-type inverters due to its low current harmonics and high linear modulation index. However, when faced with unbalanced and oscillated neutral-point (NP) voltages, extra current harmonics will be generated. In this paper, a new solution is provided. Other than adopting the existing strategies for balancing the NP voltage, the symmetrical 3L SVPWM is optimized to work with unbalanced and oscillated NP voltages. Firstly, the vectors are idealized, based on which ideal dwell times are obtained by an analytical simplified symmetrical 3L SVPWM. Then, a dc-zero-sequence component is calculated and injected to maximize the linear modulation index, and the real dwell times are further derived after the adjustment according to the ‘volt-second balance’ principle. In addition, a control strategy is investigated to actively adjust the NP voltage. Finally, the optimized symmetrical 3L SVPWM is verified by comparative experiments, showing its low current harmonics with unbalanced and oscillated NP voltages.

Low-Complexity Virtual-Vector-Based FCS-MPC With Unaffected Neutral-Point Voltage for Three-Phase T-Type Inverters

Low-Complexity Virtual-Vector-Based FCS-MPC With Unaffected Neutral-Point Voltage for Three-Phase T-Type Inverters

Enhanced Carrier-Based Discontinuous PWM for Three-Level Inverters With Unbalanced Neutral-Point Voltage

Enhanced Carrier-Based Discontinuous PWM for Three-Level Inverters With Unbalanced Neutral-Point Voltage

Optimized low switching frequency modulation with neutral point voltage control for three-level converters

Optimized low switching frequency modulation with neutral point voltage control for three-level converters

An Algorithm for a Space-Vector Pulse Width Modulation with a Hybrid Switching Sequence for a Three-Level Neutral Point Clamped Voltage Source Inverter

This paper proposes a new algorithm for a space-vector pulse width modulation (SVPWM) with a hybrid switching sequence (SS) designed to control a three-level (3L) neutral point clamped (NPC) voltage source inverter (VSI). Based on the advantages of five-stage and seven-stage SS, we designed a hybrid SS to improve four key parameters in the system: inverter output current quality, neutral point (NP) and common-mode (CM) voltage levels, and switching losses of power switches. The proposed algorithm flexibly regulates meeting the four criteria depending on the system operating conditions by changing the regulation coefficient. The paper obtained an approximate dependence to determine the optimal regulation coefficient for any values of the inverter modulation coefficient when operating jointly with an active-inductive load. The effectiveness of the proposed algorithm is confirmed by computer simulation in the MatLab+Simulink environment, as well as the results of experimental studies. The paper presents the experimental dependences of static state spaces, including the distortion coefficient of higher current harmonics at the inverter output, the maximum error of the NP voltage, the number of switching pairs of power switches, and the pulse duty factor of CM voltage, depending on the inverter modulation coefficient and the regulation coefficient of the hybrid SS. The results showed that in the algorithm for a SVPWM with a hybrid SS, the number of switchings of power switches is reduced by an average of 13.5 % while maintaining the NP voltage balance and the quality of the curve at the inverter output at an acceptable level, close to a seven-stage SS (the deviations do not exceed 0.5 % and 0.2 %, respectively). The average CM voltage coefficient decreased by no more than 4.5 %. The indicators improve the energy saving, the weight-size parameters, and the operational reliability of the 3L NPC VSI. The application area of the algorithm is much wider and includes the control of power switches of active front ends, grid converters for electricity storage systems, active power filters, and power conditioners. DOI: https://doi.org/10.52783/pst.237

Hybrid Virtual Coordinate-Driven CBPWM Strategy of Three-Level T-Type NPC Converters for Electric Aircraft Propulsion Applications

Green airborne transportation driven by the state-of-the-art turboelectric propulsion technology has received considerable attention from the aviation industry. To generate electrified thrust, three-level neutral-point-clamped (3L-NPC) converter-fed motor drives are one of the most promising candidates for the powertrain of future aircraft. However, the neutral-point (NP) potential ripple and deviation lead to harmonics and imperil the lifespan of semiconductors and capacitors. Besides, excessive power losses on the converter can limit propulsive power and shorten flight distance. To solve these issues, a new hybrid modulation strategy is proposed in this paper. With respect to the takeoff and climb featuring NP voltage drift-prone regions, carrier-based (CB) coordinate-driven modulation waves are exploited to enable virtual-space-vectors (VSVs). For operating points with high power factor, such as cruise, by reconstructing modulated signals, not only can the NP voltage balance be realized, but also the switching loss is reduced using active discontinuous pulse trains. The less computational burden is attributed to implementations in the sextant-coordinate system. The effectiveness of the proposed algorithm is verified by simulation results from a Simulink/PLECS model and experimental results obtained from a 200 kVA silicon-carbide (SiC) based T-type 3L-NPC prototype with a variable output fundamental frequency.