Neutral Block Research Articles

Endoscopy for affine Hecke categories

We show that the neutral block of the affine monodromic Hecke category for a reductive group is monoidally equivalent to the neutral block of the affine Hecke category for its endoscopic group. The semisimple complexes of both categories can be identified with the generalized Soergel bimodules via the Soergel functor. We extend this identification of semisimple complexes to the neutral blocks of the affine Hecke categories by the technical machinery developed by Bezrukavnikov and Yun.

Risks for the Development of the Russian Human Capital in the Context of Geoeconomic Fragmentation

Geopolitical tensions, increasing sanction pressure, inequality, and the slowdown of globalization serve as signals of fragmentation in the world economy. However, research on the social consequences of fragmentation remains limited. This study aims to identify the risks to the development of the Russian human capital in the context of geoeconomic fragmentation. Research methods include a systematic literature review and a comparative analysis of the country blocks based on the key indicators of technology development and human capital using World Bank data from 2011 to 2022. Based on political preferences and the level of socio-economic development, Western, Eastern, and Neutral blocks were identified and analyzed among 149 advanced and emerging economies. The results showed significant differences among the blocks in the level of human capital development and indicators of technological development. Russia has advantages in formal education at the level of Western block countries; however, health indicators of the population and the share of investment in science and education remain relatively low. Key risks in the context of fragmentation include further devaluation of human capital, losses associated with migration and health capital, a decrease in the share of high-tech sectors in the structure of value-added, and the proportion of scientific personnel

Glutamate dynamics and BOLD response during OCD symptom provocation in the lateral occipital cortex: A 7 Tesla fMRI-fMRS study

Obsessive-compulsive disorder (OCD) is linked with dysfunction in frontal-striatal, fronto-limbic, and visual brain regions. Research using proton magnetic resonance spectroscopy (1H-MRS) suggests that altered neurometabolite levels, like glutamate, may contribute to this dysfunction. However, static neurometabolite levels in OCD patients have shown inconsistent results, likely due to previous studies' limited focus on neurometabolite dynamics. We employ functional MRS (fMRS) and functional magnetic resonance imaging (fMRI) to explore these dynamics and brain activation during OCD symptom provocation.We utilized a combined 7-tesla fMRI-fMRS setup to examine task-related BOLD response and glutamate changes in the lateral occipital cortex (LOC) of 30 OCD participants and 34 matched controls during an OCD-specific symptom provocation task. The study examined main effects and between-group differences in brain activation and glutamate levels during the task.A whole sample task-effects analysis on data meeting predefined quality criteria showed significant glutamate increases (n = 41 (22 OCD, 19 controls), mean change: 3.2 %, z = 3.75, p < .001) and task activation (n = 54 (26 OCD, 28 controls), p < .001) in the LOC during OCD blocks compared to neutral blocks. However, no differences in task-induced glutamate dynamics or activation between groups were found, nor a correlation between glutamate levels and task activation.We were able to measure task-induced increases in glutamate and BOLD levels, emphasizing its feasibility for OCD research. The absence of group differences highlights the need for further exploration to discern to what extent neurometabolite dynamics differ between OCD patients and controls. Once established, future studies can use pre-post intervention fMRS-fMRI to probe the effects of therapies modulating glutamate pathways in OCD.

Mixing Order Asymmetry in Nanoparticle-Polymer Complexation and Precipitation Revealed by Isothermal Titration Calorimetry.

In recent years, there has been a renewed interest in complex coacervation, driven by concerted efforts to offer novel experimental and theoretical insights into electrostatic charge-induced association. While previous studies have primarily focused on polyelectrolytes, proteins, or surfactants, our work explores the potential of using cerium (CeO2) and iron (γ-Fe2O3) oxide nanoparticles (NPs) to develop innovative nanomaterials. By combining various charged species, such as polyelectrolytes, charged neutral block copolymers, and coated NPs, we study a wide variety of complexation patterns and compare them using isothermal titration calorimetry, light scattering, and microscopy. These techniques confirm that the titration of oppositely charged species occurs in two steps: the formation of polyelectrolyte complexes and subsequent phase (or microphase) separation, depending on the system studied. Across all examined cases, the entropic contribution to the total free energy surpasses the enthalpic contribution, in agreement with counterion release mechanisms. Furthermore, our investigation reveals a consistent asymmetry in the reaction enthalpy associated with the secondary process, with exothermic profiles observed upon the addition of cationic species to anionic ones and endothermic profiles in the reverse case.

Swayed by leading questions

AbstractThe use of leading questions as part of interrogation techniques and the factors associated with the witness suggestibility are well researched in the scientific literature. Nevertheless, literature on suggestibility in intentionally or unintentionally poorly designed social opinion surveys and push polls is scarce. The objective of this paper was to test how easily the public is swayed by leading questions in poorly designed surveys, whether certain group types of respondents in terms of their susceptibility exist, and to investigate the relationship between several demographic and personality characteristics and susceptibility. For this purpose, an online self-administered survey was conducted, containing a block of neutral and several blocks of leading questions about the respondents’ opinions on minority groups. The results indicated that the negative wording in questions was reflected in a more negative opinion on minority groups, while there are differences between respondents in their level of suggestibility. Three groups of respondents exist, i.e., non-suggestible (with no shift in opinion), suggestible (who express a more negative opinion on minorities following the suggestion), and contra-suggestible respondents (who react on the contrary and give a more positive opinion after a negative suggestion). Susceptibility to suggestion is associated with respondents’ age, openness to experience, conscientiousness, and social desirability. The results suggest that contra-suggestibility might counterbalance the error made by the leading questions, at least when more controversial topics are being surveyed.

Responses of assembled structures of block polyelectrolytes to electrostatic interaction strength.

In this paper, the responses of assembled behaviors of block polyelectrolytes (PEs) to the strength of electrostatic interactions are studied through molecular dynamic simulations. The results show that the assembled structures closely depend on the electrostatic strength. It should be noted that PE coacervation can outweigh the nucleation of hydrophobic blocks and invert the micelle structures at strong electrostatic strengths, leading to the formation of inverted micelles of PE cores and hydrophobic coronas. In the poor solvent condition for neutral block, diverse anisotropic micelles are presented; candy-like conventional micelles of hydrophobic cores and PE patches coexist with inverted candy-like micelles of PE cores and hydrophobic patches and with Janus micelles of semi-neutral aggregate and semi-PE cluster in the presence of divalent and trivalent counterions. The formation of conventional or inverted micelle is largely determined by the type of micellar fusion, which results from the nucleation competition between electrostatic correlation and hydrophobic interaction. The merge of micelles mediated by hydrophobic attraction leads to conventional hydrophobic cores, and the fusion induced by electrostatic correlations results in PE cores micelles. At strong electrostatic strengths, the PE chains exhibit rich conformations at trivalent counterions, ranging from a fully collapsed state to a rod-like state, and parallel alignment of PE chains is found.

Neutral Block Copolymer Assisted Gene Delivery using Hydrodynamic Limb Vein Injection.

Three different amphiphilic block copolymer families are synthesized to investigate new opportunities to enhance gene delivery via Hydrodynamic Limb Vein (HLV) injections. First a polyoxazoline-based family containing mostly one poly(2-methyl-2-oxazoline) (PMeOx) block and a second block POx with an ethyl (EtOx), isopropyl (iPrOx) or phenyl substituent (PhOx) is synthesized. Then an ABC poly(2-ethyl-2-oxazoline)-b-poly(2-n-propyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline) triblock copolymer is synthesized, with a thermosensitive middle block. Finally, polyglycidol-b-polybutylenoxide-b-polyglycidol copolymers with various molar masses and amphiphilic balance are produced. The simple architecture of neutral amphiphilic triblock copolymer is not sufficient to obtain enhanced in vivo gene transfection. Double or triple amphiphilic neutral block copolymers are improving the in vivo transfection performances through HLV administration as far as a block having an lower critical solution temperature is incorporated in the vector. The molar mass of the copolymer does not seem to affect the vector performances in a significant manner.

Polyelectrolyte-protein synergism: pH-responsive polyelectrolyte/insulin complexes as versatile carriers for targeted protein and drug delivery

The co-assembly of polyelectrolytes (PE) with proteins offers a promising approach for designing complex structures with customizable morphologies, charge distribution, and stability for targeted cargo delivery. However, the complexity of protein structure limits our ability to predict the properties of the formed nanoparticles, and our goal is to identify the key triggers of the morphological transition in protein/PE complexes and evaluate their ability to encapsulate multivalent ionic drugs. A positively charged PE can assemble with a protein at pH above isoelectric point due to the electrostatic attraction and disassemble at pH below isoelectric point due to the repulsion. The additional hydrophilic block of the polymer should stabilize the particles in solution and enable them to encapsulate a negatively charged drug in the presence of PE excess. We demonstrated that diblock copolymers, poly(ethylene oxide)-block-poly(N,N-dimethylaminoethyl methacrylate) and poly(ethylene oxide)-block-poly(N,N,N-trimethylammonioethyl methacrylate), consisting of a polycation block and a neutral hydrophilic block, reversibly co-assemble with insulin in pH range between 5 and 8. Using small-angle neutron and X-ray scattering (SANS, SAXS), we showed that insulin arrangement within formed particles is controlled by intermolecular electrostatic forces between protein molecules, and can be tuned by varying ionic strength. For the first time, we observed by fluorescence that formed protein/PE complexes with excess of positive charges exhibited potential for encapsulating and controlled release of negatively charged bivalent drugs, protoporphyrin-IX and zinc(II) protoporphyrin-IX, enabling the development of nanocarriers for combination therapies with adjustable charge, stability, internal structure, and size.

Assessing the Structure and Equilibrium Conditions of Complex Coacervate Core Micelles by Varying Their Shell Composition and Medium Ionic Strength.

Complex coacervates result from an associative phase separation commonly involving oppositely charged polyelectrolytes. When this associative interaction occurs between charged-neutral diblock copolymers and oppositely charged homopolymers, a nanometric aggregate called a complex coacervate core micelle, C3M, is formed. Recent studies have addressed the issue of their thermodynamic or kinetic stability but without a clear consensus. To further investigate this issue, we have studied C3Ms formed by the combination of poly(diallyldimethylammonium) and copolymer poly(acrylamide)-b-poly(acrylate) using different preparation protocols. Dynamic light scattering and small-angle X-ray scattering measurements suggest that these structures are in an equilibrium condition because the aggregates do not vary with different preparation protocols or upon aging. In addition, their stability and structures are critically dependent on several parameters such as the density of neutral blocks in their shell and the ionic strength of the medium. Decreasing the amount of copolymer in the system and, hence, the density of neutral blocks in the shell results in an increase in the aggregate size because of the core growth, although their globular shape is retained. On the other hand, larger clusters of micelles were formed at higher ionic strengths. Partially replacing 77% of the copolymer with a homopolymer of the same charge or increasing the ionic strength of the system (above 100 mmol L-1 NaCl) leads to a metastable state, after which phase separation is eventually observed. SAXS analyses reveal that this phase separation above a certain salt concentration occurs due to the coagulation of individual micelles that seem to retain their individual globular structures. Overall, these results confirm earlier claims that equilibrium C3Ms are achieved close to 1:1 charge stoichiometry but also reveal that these conditions may vary at different shell densities or higher ionic strengths, which constitute vital information for envisioning future applications of C3Ms.

The potential impact of emotionally loaded stimuli on over/under-estimating neutral situations among power plant control-room operators.

Human emotions vary on a contextual basis. The significance of emotions becomes even more salient in Control Room Operators (CROs) in power plants. This study investigated the effects of emotionally loaded pictures on over/underestimating neutral situations. Twenty CROs voluntarily enrolled in the present study. Twenty-one blocks were considered, including ten emotionally loaded and 11 neutral blocks. The stimuli were alternatively submitted to subjects in random order. Each block comprised 13 images from the International Affective Picture System (IAPS), which were shown for 5 seconds. Subjects were required to complete the Self-Assessment Manikin (SAM) after exposure to the first and the last neutral blocks, which were identical. Our analyses showed significant differences between IAPS arousal and SAM1 and SAM2 arousal ratings (p SAM1&IAPS = 0.00, p SAM2&IAPS = 0.02). There was no significant relationship between the first and the second arousals, and emotionally loaded images corresponded to no significant difference in terms of valence. The findings suggested that the participants overestimated neutral situations compared with IAPS only in arousal level. Furthermore, CROs can still retain their ability to assess neutral situations in the case of viewing emotional stimuli, especially in valence level, at least half an hour after the first rating. A study design with pure negative/positive and high arousal levels may still provide even more significant results.

Carbon neutral urban block in Athens—2050

&lt;p&gt;Athens’ extensive urbanisation, lack of green areas and the extreme heat caused by increasingly frequent heat waves indicate the need for actions improving indoor and outdoor comfort, which is closely related to the energy consumption of the buildings. This work’s aim is to create a carbon neutral block in Athens on the 2050 horizon. The optimization of the block’s form based on principles of environmental design and climatic analysis was performed to enhance its environmental benefits. Simulations on the energy performance of the block and calculations on the ability to cover the energy loads by renewables were conducted. Finally, to meet the zero-carbon neutrality, a connection with the neighbouring blocks was established. The results demonstrate the benefits of a bioclimatic, carbon neutral building design in Athens and provide a practical prototype, which can be adapted in other projects, thereby enabling the shift to a more efficient and environmentally friendly built environment.&lt;/p&gt;

Hybrid mesoporous silica materials templated with surfactant polyion complex (SPIC) micelles for pH-triggered drug release

New Surfactant PolyIon Complex (SPIC) micelles were assembled by electrostatic complexation of an antibacterial cationic surfactant, cetylpyridinium chloride (CPC), and a double hydrophilic block copolymer (DHBC) containing a neutral comb block of poly(oligo(ethylene glycol)) methyl ether acrylate (PEOGA) and a weak polyacid block of poly(acrylic acid) (PAA). The corresponding SPIC micelles, with a CPC/PAA core and a PEOGA corona, were successfully used as structure directing and functionalizing agents in a soft and sustainable sol-gel strategy, yielding hybrid mesoporous silica (MS) materials with a monomodal pore size distribution centred at 2.8 nm. The influence of synthesis parameters, including the pH, concentrations and ratios of components, was systematically investigated. The obtained hybrid MS materials were intrinsically functional, with PEOGA blocks anchored in silica walls via H-bonding, while weak polyacid blocks, complexed with CPC, were confined within the mesopores. The response of the materials to pH changes (pH 7.4, 4.2 and 3) indicated remarkable stability of the anchored DHBC, while CPC was selectively released under the acidic conditions typical of orodental biofilm microenvironments. This result is noteworthy, since the release of encapsulated amphiphilic drugs into water is less favorable than that of hydrophilic drugs. Owing to the control of their pore and functionality properties, ordered hybrid silica materials templated and functionalized with SPIC systems will be materials of choice for developing pH-responsive biomedical devices using wet processing techniques.

Unravelling the influence of affective stimulation on functional neurological symptoms: a pilot experiment examining potential mechanisms

BackgroundDifferences in affective processing have previously been shown in functional neurological disorder (FND); however, the mechanistic relevance is uncertain. We tested the hypotheses that highly arousing affective stimulation would result...

Effective delivery and selective insecticidal activity of double-stranded RNA via complexation with diblock copolymer varies with polymer block composition.

Chemical insecticides are an important tool to control damaging pest infestations. However, lack of species specificity, the rise of resistance and the demand for biological alternatives with improved ecotoxicity profiles means that chemicals with new modes of action are required. RNA interference (RNAi)-based strategies using double-stranded RNA (dsRNA) as a species-specific bio-insecticide offer an exquisite solution that addresses these issues. Many species, such as the fruit pest Drosophila suzukii, do not exhibit RNAi when dsRNA is orally administered due to degradation by gut nucleases and slow cellular uptake pathways. Thus, delivery vehicles that protect and deliver dsRNA are highly desirable. In this work, we demonstrate the complexation of D. suzukii-specific dsRNA for degradation of vha26 mRNA with bespoke diblock copolymers. We study the ex vivo protection of dsRNA against enzymatic degradation by gut enzymes, which demonstrates the efficiency of this system. Flow cytometry then investigates the cellular uptake of Cy3-labelled dsRNA, showing a 10-fold increase in the mean fluorescence intensity of cells treated with polyplexes. The polymer/dsRNA polyplexes induced a significant 87% decrease in the odds of survival of D. suzukii larvae following oral feeding only when formed with a diblock copolymer containing a long neutral block length (1:2 cationic block/neutral block). However, there was no toxicity when fed to the closely related Drosophila melanogaster. We provide evidence that dsRNA complexation with diblock copolymers is a promising strategy for RNAi-based species-specific pest control, but optimisation of polymer composition is essential for RNAi success. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Self‐assembly behavior of elastin‐like polypeptides composed of charged and neutral blocks with different block ratio

AbstractElastin‐like polypeptides (ELPs) are stimulus‐responsive protein‐based biopolymers, and some ELP block copolymers can assemble into spherical nanoparticles with thermosensitivity. In this study, three differently charged‐neutral diblock ELPs with different ratios of (1:8, 1:4, and 1:2) and one neutral ELP were synthesized, and the dependence of their physical properties on ELP concentration, pH, temperature, and salt concentration was investigated. In deionized water, all ELPs showed one‐step transition behavior from soluble single chains below the transition temperature (Tt), to macroscopic aggregates above the Tt. In NaCl solutions, while neutral ELP still aggregated above the Tt, the charged‐neutral diblock ELPs (1:4 and 1:2) formed hydrophobic core micelles by self‐assembly above certain NaCl concentration and would not aggregate due to the repulsive force between the same charged molecules on the surface. The temperature‐triggered self‐assembly behavior of each ELP as a function of block ratio, temperature, and salt concentration was investigated using analytical instruments that included a turbidimeter, dynamic light scattering, and transmission electron microscopy.

Complexes of Charged-Neutral Block Copolymers and Surfactants: Process-Dependent Features and Long-Term Stability of Their Aqueous Dispersions

Aqueous dispersions of charged-neutral block copolymers (poly(acrylamide)-b-poly(acrylate)) complexed with an oppositely charged surfactant (dodecyltrimethylammonium) have been prepared by different approaches: the simple mixing of two solutions (MS approach) containing the block copolymer and surfactant, with their respective simple counterions, and dispersion of a freeze-dried complex salt prepared in the absence of simple counterions (CS approach). The CS particles were investigated under different conditions: dispersion of a CS in salt-free water and dispersion of a CS in a dilute salt solution, the latter condition yielding dispersions with the same composition as the MS process. Additionally, aged dispersions (up to 6 months) and dispersed complexes of the polyacrylate homopolymer and dodecyltrimethylammonium surfactant were evaluated. By employing different characterization techniques, it was seen that dispersions prepared by the MS approach display nanometric spherical particles with disordered cores, and poor colloidal stability, partially caused by the absence of surface charge (ζ-potential close to zero). Oppositely, anisometric particles were formed in CS dispersions and were large enough to sustain micellar cubic cores. The CS particles presented long-time colloidal stability, partially due to a net negative surface charge, but the stability varied with the length of the neutral block composing the corona. Our results demonstrate that all dispersed particles are metastable structures, with physicochemical properties strongly dependent on the preparation procedure, thus making these particles suitable for fundamental studies and potential applications where accurate control of their properties, including size, shape, internal structure, and stability, is desired.

Implicit-Solvent Coarse-Grained Simulations of Linear-Dendritic Block Copolymer Micelles.

The design of nanoassemblies can be conveniently achieved by tuning the strength of the hydrophobic interactions of block copolymers in selective solvents. These block copolymer micelles form supramolecular aggregates, which have attracted great attention in the area of drug delivery and imaging in biomedicine due to their easy-to-tune properties and straightforward large-scale production. In the present work, we have investigated the micellization process of linear-dendritic block copolymers in order to elucidate the effect of branching on the micellar properties. We focus on block copolymers formed by linear hydrophobic blocks attached to either dendritic neutral or charged hydrophilic blocks. We have implemented a simple protocol for determining the equilibrium micellar size, which permits the study of linear-dendritic block copolymers in a wide range of block morphologies in an efficient and parallelizable manner. We have explored the impact of different topological and charge properties of the hydrophilic blocks on the equilibrium micellar properties and compared them to predictions from self-consistent field theory and scaling theory. We have found that, at higher degrees of branching in the corona and for short polymer chains, excluded volume interactions strongly influence the micellar aggregation as well as their effective charge.

Assessing the Contribution of the Neutral Blocks in DNA/Block-Copolymer Polyplexes: Poly(acrylamide) vs. Poly(ethylene Oxide).

The interaction of DNA with different block copolymers, namely poly (trimethylammonium chloride methacryloyoxy)ethyl)-block-poly(acrylamide), i.e., (PTEA)-b-(PAm), and poly (trimethylammonium chloride methacryloyoxy)ethyl)-block-poly(ethylene oxide), i.e., (PTEA)-b-(PEO), was studied. The nature of the cationic block was maintained fixed (PTEA), whereas the neutral blocks contained varying amounts of acrylamide or (ethylene oxide) units. According to results from isothermal titration microcalorimetry measurements, the copolymers interaction with DNA is endothermic with an enthalpy around 4.0 kJ mol-1 of charges for (PTEA)-b-(PAm) and 5.5 kJ mol-1 of charges for (PTEA)-b-(PEO). The hydrodynamic diameters of (PTEA)-b-(PEO)/DNA and (PTEA)-b-(PAm)/DNA polyplexes prepared by titration were around 200 nm at charge ratio (Z+/-) &lt; 1. At Z+/- close and above 1, the (PTEA)50-b-(PAm)50/DNA and (PTEA)50-b-(PAm)200/DNA polyplexes precipitated. Interestingly, (PTEA)50-b-(PAm)1000/DNA polyplexes remained with a size of around 300 nm even after charge neutralization, probably due to the size of the neutral block. Conversely, for (PTEA)96-b-(PEO)100/DNA polyplexes, the size distribution was broad, indicating a more heterogeneous system. Polyplexes were also prepared by direct mixture at Z+/- of 2.0, and they displayed diameters around 120-150 nm, remaining stable for more than 10 days. Direct and reverse titration experiments showed that the order of addition affects both the size and charge of the resulting polyplexes.

Dimeric and 1D polymeric low-chlorinated C60 fullerenes, (C60Cl5)2 and (C60Cl4)∞.

Low-chlorinated fullerenes, dimeric (C60Cl5)2 and one-dimensional, polymeric (C60Cl4)∞, were obtained by high-temperature (270 °C) chlorination of C60 with a SbCl5/SbCl3 mixture, as revealed by X-ray crystallography. The compounds were characterized by IR and Raman spectroscopy and theoretical calculations. This is the first observation of a fullerene polymer with single C-C bonding and neutral building blocks.

Theoretical treatment of complex coacervate core micelles: structure and pH-induced disassembly.

Complex coacervate core micelles (C3Ms) are supramolecular soft nanostructures formed by the assembly of a block copolymer and an oppositely charged homopolymer. The coacervation of the charged segments in both macromolecules drives the formation of the core of the C3M, while the neutral block of the copolymer forms the corona. This work introduces a molecular theory (MOLT) that predicts the internal structure and stimuli-responsive properties of C3Ms and explicitly considers the chemical architecture of the polyelectrolytes, their acid-based equilibria and electrostatic and non-electrostatic interactions. In order to accurately predict complex coacervation, the correlations between charged species are incorporated into MOLT as ion-pairing processes, which are modeled using a coupled chemical equilibrium formalism. Very good agreement was observed between the experimental results in the literature and MOLT predictions for the scaling relationships that relate the dimensions of the micelle (aggregation number and sizes of the micelle and the core) to the lengths of the different blocks. MOLT was used to study the disassembly of the micelles when the solution pH is driven away from the value that guarantees the charge stoichiometry of the core. This study reveals that very sharp disassembly transitions can be obtained by tuning the length or architecture of the copolymer component, thereby suggesting potential routes to design C3Ms capable of releasing their components at very precise pH values.