Neutral Analogues Research Articles

Theoretical Study on the Dissociation Mechanism of Thiophene in the UV Photoabsorption, Ionization, and Electron Attachment Processes

ABSTRACTA computational study on the intricate mechanism of thiophene ring‐fragmentation (TRF) in the UV photodissociation, dissociative ionization, and dissociative electron attachment process has been performed. The complete fragmentation process is studied using high level G4 composite method for neutral, cationic, and anionic species by elucidating a detailed mechanism for various reaction channels. The study shows that for neutral thiophene, the major pathway is the migration of H atom and subsequent fragmentation through a transition state yielding acetylene (HC≡CH) and H2C=C=S. However, for the thiophene cation, the acetylene (HC≡CH)+H2C=C=S+ channel is a two‐step and barrier less process. The onset of CH3+HC=C=C=S channel has been observed in both the thiophene cation and anion which was absent in the neutral analogue. Similarly, the onset of H2S+HC≡C—C≡CH channel has been found to operate only in the thiophene cation. Others, such as HCS and HS elimination channels have been found in all the species showing similar dissociation mechanism. For the thiophene anion, the TRF process is very much similar to that of thiophene cation. However, the reaction enthalpies of the various elimination channels in the anionic species are lower as compared to that of cationic species. During the study, the ionization energies and electron affinities of various molecules/radicals produced during the fragmentation process of thiophene were also computed.

Natural rhenium sulfide clusters formed under conditions of laser desorption-ionization.

Cluster forms of rhenium sulfides have important practical applications as catalysts in oil refining and thus present high interest. However, only a limited number of rhenium sulfide clusters have been described previously. It is known that cluster formation actively occurs under conditions of laser desorption-ionization; nevertheless, detailed studies of rhenium sulfides under such conditions were apparently not conducted previously. A sample of natural rhenium sulfide, collected from the fumarolic field of Kudriavy volcano (Iturup island, Russia) in 2002, was investigated using the laser desorption-ionization mass spectrometry method. The formed rhenium sulfide clusters were registered by a time-of-flight detector and identified programmatically using the software developed in IPCE RAS. The identification involved a comparison of the distribution of isotopic peak intensities, observed in the resulting mass spectra, with the theoretical probabilities of occurrence of various isotopologues for hypothetical rhenium sulfide species. Over 60 rhenium sulfide clusters of RexSy + and RexSyOz - types containing up to 10 rhenium atoms were formed when a sample of natural rhenium sulfide was exposed to laser desorption-ionization conditions. Several isolated heterometallic ReXMoSY + and ReXMoSYOZ - clusters containing up to eight rhenium atoms were additionally observed in the resulting mass spectra. The species with compositions, for which the electrically neutral analogs are known, apparently were the most stable rhenium sulfide clusters among the detected ones. The obtained data allowed summarizing the patterns of formation of rhenium sulfide clusters under conditions of laser desorption-ionization. The ability of rhenium and sulfur to form cluster species containing from 7 to 10 atoms of rhenium was likely discovered for the first time. The majority of the rhenium sulfide clusters described in this study, notably RexSy + ions containing over seven atoms of rhenium, were apparently not observed previously.

Origin of Reactivity Trends of an Elusive Metathesis Intermediate from NMR Chemical Shift Analysis of Surrogate Analogues.

Olefin metathesis has become an efficient tool in synthetic organic chemistry to build carbon-carbon bonds, thanks to the development of Grubbs- and Schrock-type catalysts. Olefin coordination, a key and often rate-determining elementary step for d0 Schrock-type catalysts, has been rarely explored due to the lack of accessible relevant molecular analogues. Herein, we present a fully characterized surrogate of this key olefin-coordination intermediate, namely, a cationic d0 tungsten oxo-methylidene complex bearing two N-heterocyclic carbene ligands─[WO(CH2)Cl(IMes)2](OTf) (1) (IMes = 1,3-dimesitylimidazole-2-ylidene, OTf-triflate counteranion), resulting in a trigonal bipyramidal (TBP) geometry, along with its neutral octahedral analogue [WO(CH2)Cl2(IMes)2] (2)─and an isostructural oxo-methylidyne derivative [WO(CH)Cl(IMes)2] (3). The analysis of their solid-state 13C and 183W MAS NMR signatures, along with computed 17O NMR parameters, helps to correlate their electronic structures with NMR patterns and evidences the importance of the competition among the three equatorial ligands in the TBP complexes. Anchored on experimentally obtained NMR parameters for 1, computational analysis of a series of olefin coordination intermediates highlights the interplay between σ- and π-donating ligands in modulating their stability and further paralleling their reactivity. NMR spectroscopy descriptors reveal the origin for the advantage of the dissymmetry in σ-donating abilities of ancillary ligands in Schrock-type catalysts: weak σ-donors avoid the orbital-competition with the oxo ligand upon formation of a TBP olefin-coordination intermediate, while stronger σ-donors compromise M≡O triple bonding and thus render olefin coordination step energy demanding.

In Silico Screening and Experimental Verification of Near‐Infrared‐Emissive Two‐Boron‐Doped Polycyclic Aromatic Hydrocarbons

AbstractEmbedding two boron atoms into a polycyclic aromatic hydrocarbon (PAH) leads to the formation of a neutral analogue that is isoelectronic to the corresponding dicationic PAH skeleton, which can significantly alter its electronic structure. Based on this concept, we explore herein the identification of near‐infrared (NIR)‐emissive PAHs with the aid of an in silico screening method. Using perylene as the PAH scaffold, we embedded two boron atoms and fused two thiophene rings to it. Based on this design concept, all possible structures (ca. 2500 entities) were generated using a comprehensive structure generator. Time‐dependent DFT calculations were conducted on all these structures, and promising candidates were extracted based on the vertical excitation energy, transition dipole moment, and atomization energy per bond. One of the extracted dithieno‐diboraperylene candidates was synthesized and indeed exhibited emission at 724 nm with a quantum yield of 0.40 in toluene, demonstrating the validity of this screening method. This modification was further applied to other PAHs, and a series of thienobora‐modified PAHs was synthesized.

In Silico Screening and Experimental Verification of Near-Infrared-Emissive Two-Boron-Doped Polycyclic Aromatic Hydrocarbons.

Embedding two boron atoms into a polycyclic aromatic hydrocarbon (PAH) leads to the formation of a neutral analogue that is isoelectronic to the corresponding dicationic PAH skeleton, which can significantly alter its electronic structure. Based on this concept, we explore herein the identification of near-infrared (NIR)-emissive PAHs with the aid of an in silico screening method. Using perylene as the PAH scaffold, we embedded two boron atoms and fused two thiophene rings to it. Based on this design concept, all possible structures (ca. 2500 entities) were generated using a comprehensive structure generator. Time-dependent DFT calculations were conducted on all these structures, and promising candidates were extracted based on the vertical excitation energy, transition dipole moment, and atomization energy per bond. One of the extracted dithieno-diboraperylene candidates was synthesized and indeed exhibited emission at 724 nm with a quantum yield of 0.40 in toluene, demonstrating the validity of this screening method. This modification was further applied to other PAHs, and a series of thienobora-modified PAHs was synthesized.

Polaron Formation in Conducting Polymers: A Novel Approach to Designing Materials with a Larger NLO Response.

Substantial efforts have been made to design and investigate new approaches for high-performance nonlinear optical (NLO) materials. Herein, we report polaron formation in conducting polymers as a new approach to designing materials with a large NLO response. A comparative study of polypyrrole and polypyrrole-based polaron (nPy+ where n = 1, 3, 5, 7, and 9) is carried out for optoelectronic and NLO properties. The studied polarons (PPy+) show excellent electronic properties and have reduced ionization potential (IP) as compared to neutral PPy, and a monotonic decrease is observed with increased chain lengths (1Py to 9Py). Interesting trends of global reactivity descriptors can be seen; the softness (S) increases with an increase in the chain length of PPy, while the hardness (η) decreases in the same fashion. The EH-L gaps for the PPy+ polaronic state are significantly lower than their corresponding neutral PPy. In the polaronic model (PPy+), radicals decisively reduce the crucial excitation energy, reminiscent of excess electrons (alkali metals). The performed TDOS spectral analysis further justifies the better conductive and electronic properties of polarons (PPy+) with increased chain lengths (conjugation). The static hyperpolarizability response (βo) is recorded up to 1.3 × 102 au for 9Py, while for polaron 9Py+, it has increased up to 3.2 × 104 au. The static hyperpolarizability of the 9Py+ polaronic state is 246 times higher than that of the corresponding neutral analogue, 9Py. It is observed that the values of βo obtained at the CAM-B3LYP/6-311+G(d,p) level of theory are comparable to those obtained at the LC-BLYP and ωB97XD functionals. The βvec values show a strong correlation with the total hyperpolarizability (βo). Furthermore, the calculated second harmonic generation (SHG) values are up to 4.0 × 106 au at 532 nm, whereas electro-optic Pockel's effect (EOPE) is much more pronounced at the smaller dispersion frequency (1064 nm). The TD-DFT study reveal the red-shifted absorption maxima (λmax) with an increased length of PPy+. A significant reduction in excitation energy (ΔE) is observed with increased length of PPy and PPy+, which also favors the improved NLO response. Hence, the studied thermally conducting polypyrrole-based polarons (PPy+) are new entries into NLO materials with better electrical and optical features.

Unlocking Lewis acidity via the redox non-innocence of a phenothiazine-substituted borane.

We describe a new approach to enhancing Lewis acidity, through the single electron oxidation of a borane with a pendant phenothiazine. This results in the formation of a persistent radical cation with increased electrophilicity. Computational and experimental studies indicate this radical cation significantly enhances the Lewis acidity and catalytic activity compared to its neutral analog. These results illustrate the viability of this approach in turning on the Lewis acidity of relatively inert boranes.

Promising horizons in achondroplasia along with the development of new drugs.

Achondroplasia (ACH) is a representative skeletal disorder characterized by rhizomelic shortened limbs and short stature. ACH is classified as belonging to the fibroblast growth factor receptor 3 (FGFR3) group. The downstream signal transduction of FGFR3 consists of STAT1 and RAS/RAF/MEK/ERK pathways. The mutant FGFR3 found in ACH is continuously phosphorylated and activates downstream signals, resulting in abnormal proliferation and differentiation of chondrocytes in the growth plate and cranial base synchondrosis. A patient registry has been developed and has contributed to revealing the natural history of ACH patients. Concerning the short stature, the adult height of ACH patients ranges between 126.7-135.2 cm for men and 119.9-125.5 cm for women in many countries. Along with severe short stature, foramen magnum stenosis and spinal canal stenosis are major complications: the former leads to sleep apnea, breathing disorders, myelopathy, hydrocephalus, and sudden death, and the latter causes pain in the extremities, numbness, muscle weakness, movement disorders, intermittent claudication, and bladder-rectal disorders. Growth hormone treatment is available for ACH only in Japan. However, the effect of the treatment on adult height is not satisfactory. Recently, the neutral endopeptidase-resistant CNP analogue vosoritide has been approved as a new drug for ACH. Additionally in development are a tyrosine kinase inhibitor, a soluble FGFR3, an antibody against FGFR3, meclizine, and the FGF2-aptamer. New drugs will bring a brighter future for patients with ACH.

Tetracationic bis-triarylborane tetraynes as dual fluorescence and SERS sensors for DNA, RNA and proteins

We report herein two new dual luminescent and Raman (SERS)-active probes, able to sense submicromolar concentrations of DNA and protein in aqueous samples. Both analogues, characterized by a tetrayne linker connecting two triarylborane fluorophores, show high binding affinities and strong fluorescent and SERS responses to ds-DNA, ds-RNA, and protein (BSA). Detailed studies revealed that both the neutral and tetracationic analogue bind to ds-DNA/RNA grooves and protein (BSA) with similar affinities, at variance to previous non-charged triarylboranes, which interacted only with BSA. The fluorimetric response upon binding to BSA was different to that observed for previous analogues; the tetracationic analogue emission was enhanced and the neutral analogue emission quenched, this selectivity being attributed to the difference in solvatochromism of the triarylborane fluorophore (charged vs neutral). The neutral dye did not show any SERS signal due to the lack of interaction with negatively charged Ag nanoparticles, stressing the importance of positive charge for the application of SERS sensing. The SERS signal of the tetrayne linker of the tetracationic analogue was shifted by −81 cm−1 compared to that of the previously studied diyne analogue. The SERS signal intensity change was proportional to dye binding to ds-DNA, and completely quenched by nanomolar concentrations of BSA, such a specific response being attributed to the complete immersion of the dye within BSA.

A Neutral Planar Four-Membered Si2B2 2π-Aromatic Ring.

The synthesis of the first inorganic four-membered neutral 2π-aromatic compound 2 is reported. This unique ring has been synthesized from a simple and straightforward reaction of amidinato-silylene with dichlorophenylborane, followed by the reduction with KC8 in THF. Compound 2 has been fully characterized by single-crystal X-ray diffraction (SC-XRD), NMR spectroscopy, and mass spectrometry. The computational calculations reveal that the Si2B2 ring is a π-delocalized system resulting from the interaction of pπ orbital of B and Si-N σ* orbitals having pseudo π symmetry. Compound 2 is the first known example of a neutral planar inorganic analogue of cyclobutenyl dication.

Theoretical investigation of anion perfluorocubane.

In this work, we did a theoretical exploration of C8F8 (Ib) and its anion radical analogue (IIb) in this work. By investigating the thermochemistry of electron capture, we find that the free energy associated with the conversion of C8H8 (Ia) into its anion radical analogue IIa is of the order of + 92.83 kcal.mol-1, while the conversion of Ib into IIb is - 6.42 kcal.mol-1. Therefore, species IIb is thermodynamically more stable than its neutral analogue. Natural bond orbitals (NBO) analyses revealed that compound Ib exhibits a relative electronic stability as a function of intramolecular delocalisations of the type [Formula: see text] of the order of 2.70 kcal.mol-1. Similar delocalizations for Ia are energetically lower (1.45 kcal.mol-1). Topological analyses of compounds Ib and IIb indicate that the addition of an electron to Ib enhances the covalency of the C-C bond, as can be seen by the reduction in the ellipticity of the C-C bond. The opposite is observed for Ia, whose addition of the electron (leading to IIa) reduces the covalency of the C-C bond. By comparing the free and packaged forms of the species, it is found that, in the crystalline form, the system will present greater relative stability due to the dispersive interactions involved, as evidenced by non-covalent interactions (NCI) analysis. Finally, it was possible to verify that the manifestation of the current density with a lower paratropic and less antiaromatic character in Ib and IIb point to C8F8 as a strong candidate for electron capture. Geometry optimization calculations were carried out, for all monomer structures using the hybrid functional B3LYP-D3 and the 6-31+G(d,p) basis set. To determine the formation thermochemistry of the ions, electronic energy corrections was performed using the DLPNO-CCSD(T)/aug-cc-pVTZ/C method. Starting from the optimised forms, shielding, nuclear magnetic resonance (NMR) spectra employing gauge-independent atomic orbital (GIAO), and NBO calculations were performed for these monomers, using the PBE0 functional and the pCSseg-2 atomic basis set. The magnetochemical analysis of ring currents was performed using the GIMIC formalism. For the topological analysis, it was applied the combination DLPNO-CCSD(T)/aug-cc-pVTZ/C, previously used for correcting the electronic energy.

Evaluation of Mono and Bimetallic Ferrocene-Based 1,2,3-Triazolyl Compounds as Burning Rate Catalysts for Solid Rocket Motor.

We reported mono and bimetallic ferrocene-based 1,2,3-triazolyl compounds as potential burning rate catalysts in their neutral and ionic forms. All complexes reported here were characterized using 1H and 13C NMR, elemental analysis, and Mössbauer spectroscopy, which was performed for neutral and oxide compounds. The complexes present quasireversible redox potentials with higher oxidative ability than ferrocene and catocene under the same conditions. The complexes were tested as catalysts on the thermal decomposition of ammonium perchlorate (AP) and examined by a differential scanning calorimetry technique to gain further knowledge about their catalytic behavior. Compound 1 causes a decrease of the high-temperature decomposition (HTD) of AP positively, decreasing the decomposition temperature of AP to 345 °C and consequently increasing the energy release to 1939 J·g-1. We took the residues from the pans after testing from the DSC to elucidate the underlying reaction pathways. We obtained the size of the nanostructures formed after thermal decomposition of AP determined by the TEM technique. The diameter and size distribution of iron oxide nanoparticles formed depend on the alkyl sidechain of the triazolium ring, which induces the formation of nanoparticles with a double diameter and size distribution compared to their neutral analogues, suggesting that the possible intermediate for the mechanism degradation of AP by ferrocene derivatives is nanoscale Fe2O3 or similar oxides.

Using reactivity predictors for enhancing the electrocatalytic activity of MN4 molecular catalysts for the oxygen reduction reaction: The role of the N-pyridinium functional group in the porphyrazine-derivative ligands

Using reactivity predictors to enhance or control the electrocatalytic activity of materials is a fascinating concept. This is especially true for the development of alternative platinum metal group-free materials as it facilitates the rational design of active catalytic materials for the oxygen reduction reaction (ORR). In previous work, we have found that the peripheral and non-peripheral electron-withdrawing effects and the electron-pull effect from axial extraplanar ligand in iron-phthalocyanine (FePc) are key factors in improving the binding energy between the active Fe site and O2 resulting in an increase of the electrocatalytic activity of FePcs for the ORR. In this work, we have utilized fundamental principles of electrocatalysis and DFT calculations to design and synthesize FeN4 molecular catalysts to increase their catalytic performance for the ORR through the "pull" effect. To achieve this, by chemical synthesis, we have incorporated pyridinium functional groups (N+py) in peripheral and non-peripheral positions into the porphyrazine cyclic ligands. In this fashion we obtain the porphyrazinium molecular catalysts, [Fe(II)2,3-(TMe)TPyPz]4+ and [Fe(II)3,4-(TMe)TPyPz]4+. Because these new compounds are not commercially available and, to the best of our knowledge, they have not been tested for ORR. In order to determine their effectiveness, we have compared porphyrazinium with neutral analog porphyrazine compounds (Fe(II)TPyPz) and perfluorinated and perchlorinated iron phthalocyanines, which are currently the best molecular catalysts for ORR. The electrocatalytic activity was determined for each molecular catalyst deposited on the edge plane of a graphite electrode (EPG) surface in an alkaline medium. Only for the purpose of comparison we include two Fe porphyrins studied previously, which show low activity for ORR. Although the DFT theoretical analysis of porphyrazinium complexes suggests a high activity for these catalysts, our experimental findings revealed the opposite trend. Therefore, this finding makes us reconsider the interfacial effects, such as the counter-ions effects on N+py that could influence the electron-pull effect, opening new insights for designing molecular catalysts considering interface engineering. Moreover we report for the first time, the reactivity linear relationship between the metal-centered redox potential gap (E°Fe(III)/(II) – E°Fe(II)/(I))) with the electrocatalytic activity for ORR for all catalysts studied, emerging this potential gap as a possible and promising new reactivity descriptor for ORR in MN4 catalyst.

Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes.

We perform all-atom molecular dynamics simulations of the adsorption of amino acid side-chain analogues on polymer brushes. The analogues examined are nonpolar isobutane, polar propionamide, negatively charged propionate ion, and positively charged butylammonium ion. The polymer brushes consist of a sheet of graphene and strongly hydrophilic poly(carboxybetaine methacrylate) (PCBMA) or weakly hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA). The effective interactions between isobutane and polymer chains are repulsive for PCBMA and attractive for PHEMA. Gibbs energy decomposition analysis shows that this is due to the abundance of water in the PCBMA brush, which increases the steric repulsion and decreases the Lennard-Jones attraction. The affinity of the hydrophilic analogues is low for both PCBMA and PHEMA chains, but the balance between the components of the Gibbs energy is different for the two polymers. The simulations are performed at several θ, where θ is the degree of overlap of polymer chains. The antifouling performance against the neutral analogues is better for PCBMA than for PHEMA in the low and high θ regimes. However, in the middle θ regime, the antifouling performance of PHEMA is close to or better than that of PCBMA. This is attributed to the formation of a dense layer of PHEMA on the graphene surface that inhibits direct adsorption of analogue molecules on graphene. The charged analogues do not bind to either the PHEMA or PCBMA brush irrespective of θ.

Uranium(IV) and Thorium(IV) Coordination Polymers Based on Tritopic Carboxylic Acids.

Nine new coordination polymers based on U(IV) and Th(IV) were synthesized solvothermally utilizing four different trianionic carboxylates (H3BHTC = biphenyl-3,4',5-tricarboxylic acid, H3NTB = 4,4',4″-nitrilotribenzoic acid, H3BTB = 4,4',4″-benzene-1,3,5-triyl-tris(benzoic acid), H3BTE = 4,4',4″-(1,3,5-benzenetriyltri-2,1-ethynediyl)trisbenzoic acid). The influence of the ligand architecture, the pH, the stoichiometry, the nature of the metal, and the concentration on the structure and dimensionality of the final actinide assembly is discussed. The H3BHTC ligand allowed the synthesis of a cationic three-dimensional (3D) framework [U(BHTC)(DMF)3]I (1), which is the first example of a cationic U(IV) polymer. The H3NTB ligand yielded the 3D neutral polymer [U3(NTB)4] (2) or the two-dimensional (2D) cationic polymer [U(NTB)(NMP)3]I (3), depending on the solvent. When conditions leading to (2) were used with a Th(IV) precursor, the 2D neutral polymer [Th(NTB)(DMF)3Cl] (4) was obtained. The ligand H3BTB allowed the synthesis of two 3D cationic networks [U(BTB)(DMF)2]I (5) and [U(BTB)(DMF)3]I (7) or the neutral 3D analogue [U3(BTB)4] (6), depending on the precursor's oxidation state and the acidity of the reaction mixture. The ligand H3BTE allowed the synthesis of the anionic 3D [(CH3)2NH2][U2(BTE)3] (8) framework featuring large accessible pores, and under the same conditions, an isostructural Th(IV) was also obtained [(CH3)2NH2][Th2(BTE)3] (8-Th). All isolated coordination polymers were characterized by single-crystal X-ray diffraction (SCXRD). The Langmuir surface areas of the U(IV) polymers (2), (7), and (8) increased from 140 to 310 m2/g owing to the increasing size of the linker, with polymer (8) showing a value that is comparable to the highest surface area reported to date. The effect of the postsynthetic solvent substitution was also studied, revealing a crystal-to-crystal transformation of the cationic framework (7) to the neutral framework [U(BTB)(THF)I] (7c).

Boranes Paving the Way to Anionic Cyclic (Alkyl)(amino)carbenes (Ani-cAACs).

First examples of anionic cyclic (alkyl)(amino)carbenes (Ani-cAACs) that contain borane substituents have been synthesized. The nature of the borane substituents allows a modulation of the σ-donor or π-acceptor abilities compared to their neutral analogues. A B(CN)3 -substituted Ani-cAAC has been generated and used in situ. The corresponding C2 F5 BF2 -Ani-cAAC 6 was obtained in high yield on a multigram scale. First reactions of these novel ligands with elemental selenium and chloro(triphenylphosphine)gold(I) led to the anionic selenium adducts 7 and 8 and the Ani-cAAC gold complex 9. The properties of these compounds and data derived from theoretical calculations provide an insight into the electronic and steric properties of these novel anionic cAACs. Especially the ease of synthesis and the combination of properties such as negative charge, large buried volume, and good σ-donor and π-acceptor ability renders Ani-cAACs unique and promising new building blocks.

Oxidative cyclization leading to charged sulfur-containing tricyclic heteroarenes

Fused heterocycles are of crucial importance to the pharmaceutical and agrochemical industry. While their neutral analogues including the fungicide tricyclazole have been investigated for various applications and can be prepared via several synthetic pathways, charged N-substituted benzo[4,5]thiazolo[2,3-c][1,2,4]triazol-1-ium salts are not as easily accessible. In this review we summarize a new method for the synthesis of novel N-arylated and N-alkylated benzo[4,5]thiazolo[2,3-c][1,2,4]triazol-1-ium salts from air stable precursors and present an expanded substrate scope for this reaction. The N-aryl substituted precursors are available through a catalytic N-arylation previously developed in our group, while N-alkyl substituted precursors were prepared by a nucleophilic substitution reaction. Selective deprotection of the para-methoxybenzyl protected precursor leads to the free thiol which under oxidative conditions undergoes C–H functionalization of the linked 1,2,4-triazolium salt, thereby forming the fused aromatic heterocycle. A wide range of functional groups such as alcohols, amides, and alkynes are tolerated. Mechanistic investigations indicate the involvement of a disulfide intermediate in the oxidative cyclization step.

Synthesis and photothermal/photodynamic antimicrobial activities of phthalocyanines tetra-substituted by morpholinyl moieties

A series of ɑ-tetra-substituted phthalocyanines (M = 2H, Cu, Co, Ni) with morpholinyl moieties and their corresponding quaternized derivatives have been synthesized. The spectroscopic and photosensitizing properties, photothermal effects, aggregation trend, and partition coefficients of these phthalocyanines are evaluated. Besides, we appraised their photothermal and photodynamic activities against C. albicans and E. coli under near-infrared (NIR) light irradiation (680 nm). The results show that cationic phthalocyanines are more efficacies in killing bacteria and fungi than their neutral analogues. For copper (II) phthalocyanine 4b and metal-free phthalocyanine 7b, their photodynamic activities play a key role in antimicrobial treatment, while for other phthalocyanines, their photothermal effects play a major role. Moreover, metal-free phthalocyanine 7b exhibits an ideal synergistic photothermal/photodynamic antimicrobial activity and shows the highest photocytotoxicity among all the compounds. The IC90 values of 7b towards C. albicans and E. coli are as low as 1.12 μM and 0.47 μM, respectively, while others have IC90 values ranging from 3.31 μM to 50 μM, implying that 7b would be a good candidate for future antimicrobial applications.

Cover Feature: Quest for the Most Aromatic Pathway in Charged Expanded Porphyrins (Chem. Eur. J. 6/2023)

The aromaticity of charged expanded porphyrins turns out to be much more complex to study than that of their planar neutral analogues. In particular, identifying the most conjugated circuit is no longer straightforward. In addition to planarity, the protonation and deprotonation of porphyrinoids play an important role in determining their aromaticity. We have demonstrated that the largest charged porphyrins do not present a clear main conjugation pathway. Among the preferred aromatic indices, AVmin ends up being the most useful tool for recognizing the most aromatic path. We can relate the difficulty of finding the most conjugated path of a porphyrin to the number of pieces in a puzzle. Thus, the neutral state of the [36]octaphyrin is represented as a puzzle with few pieces; the protonated and deprotonated states are presented as puzzles with more pieces to indicate that they are more difficult to complete. More information can be found in the Research Article by M. Torrent-Sucarrat, E. Matito, M. Alonso, and co-workers (DOI: 10.1002/chem.202202264).

Solvation rules: aromatic interactions outcompete cation-π interactions in synthetic host-guest complexes in water.

Chemical double mutant cycles were used to measure the interaction of a N-methyl pyridinium cation with a π-box in a calix[4]pyrrole receptor. Although the cation-π interaction is attractive (-11 kJ mol-1), it is 7 kJ mol-1 less favourable than the corresponding aromatic interaction with the isosteric but uncharged tolyl group.