Net Height Research Articles

Mathematical modeling for the efficiency function of the Retiro small hydroelectric power plant turbine-generator set

ABSTRACT Many authors use an efficiency constant for the turbine-generator set to calculate energy generation in hydroelectric projects. This often does not reflect reality because the efficiency of this system is relative and is related to the potential of the net head height and the flow of turbine discharge. The present work aims to perform a mathematical modeling for an analysis of the efficiency of the Turbine-Generator Small Hydroelectric Power Plant (SHPP) Retiro. To perform this analysis, a model based on a second-degree polynomial function was employed. A multivariate regression technique was applied by the Least Square Method (LSM) to obtain the coefficients of the function. To verify the behavior of the measured and adjusted data, the Determination Coefficient (R2) of Root Mean Square Error (RMSE) algorithm was applied. The RMSE Mean of 0.022 and the RMSE Std of 0.029 suggest that the second-degree polynomial function is more consistent and stable across different training and validation datasets. The R2 value of 0.993 indicates that 99.3% of the variability in the data is explained by the model. The Omnibus, Durbin-Watson, and Jarque-Bera tests were applied to diagnose potential issues related to normality, autocorrelation, and adequacy, thereby validating the accuracy and significance of the model. The Hessian matrix technique was also used to verify the critical points of the function. The critical point corresponding to a water head of 11.47 meters and a turbine flow of 145.1 m3/s presented the highest operational efficiency. This study allows presenting a turbine efficiency function, its Hill Curve and a generator efficiency function with its corresponding Efficiency Curve. For efficiency analysis in several flow, height and power settings. The technique has proved efficient and can be an applicable tool in energy parameter studies for other hydroelectric projects with the same characteristics as SHPP Retiro.

Technical review of encircling ringed gillnet for gillnet standardization in Indonesia

Abstract A technical review of encircling ringed gill nets for gillnet standardization in Indonesia is necessary to determine the design and construction by the waters and their fish target. The aim of this study was to describe the characteristics and design of fishing gear, including dimension, shape, and construction. The result of the identification of encircling ringed gillnet belonging to the local fishermen associated with the size of black pomfret (Parastromateus niger) as the fished target is used for the preparation of fishing gear standardization materials for the concerned by adjusting the size of fish target by measuring a fish length of about 150 up to 250 mm or a fish body circumference of about 300 up to 400 mm. As a result, the encircling ringed gillnet is made of nylon monofilament diameter 0.35 mm, and PE 380 d/6 mesh size 76,2 mm, ML = 2879 mesh, and MD = 218 mesh with an upper rope length of 120.65 m shorter than the lower rope 142,6 m. This Gillnet has a buoyancy of 173.6 grf/m and a sinking power of 124,7 grf/m or a buoyancy ratio of 1,39 sinking power. The gillnet is trapezoidal-shaped, operated by making the circumference of the net to fish closed around FAD (Fish Aggregating Device) near waters of more than 20 m depth with an attached net height of 13,30 m.

Numerical analysis of the seismic performance of existing steel frames with rigid connection with truss-beam-segments

Addressing the insufficient research on fully welded connection with truss-beam-segments (FWCT), this study conducts a comprehensive investigation into the seismic performance of FWCT and its associated steel frame. Primary parameters influencing the seismic performance of FWCT are examined through numerical analysis, and a design method for FWCT is provided. Subsequently, a time-history analysis of composite frames with FWCTs is proposed to investigate the effect of adding truss-beam-segments during rare earthquakes on the seismic performance of the structure as a whole, along with reinforcement recommendations. The study results show that the width of the truss-beam-segment (TS) should ideally be equal to the width of the beam flange, with a thickness equal to that of the beam flange. The net height should be less than or equal to 0.17 times the clear height of the steel beam. The horizontal angle of the external diagonal leg should be less than or equal to 40°, and the length of the horizontal short leg should be greater than the plastic deformation region length at the beam root. The axial compression ratio for the column should be less than 0.7 to prevent local buckling of the column. As the thickness of the composite slab increases, the initial stiffness and load-bearing capacity of the positive moment region gradually increase, while those of the negative moment region remain relatively constant. Time-history analysis indicates that the maximum story displacement and inter-story displacement of the composite frame with TSs are reduced by 4.7 %–5.3 % and 2.5 %–5.8 %, respectively, compared to the composite frame without TSs under seismic wave action. This implies an enhanced capacity of the composite frame with TSs to withstand lateral deformation. For a mid-to high-rise composite frame with n stories, the addition of TSs was recommended primarily for the first (n/2 + 1) floors where plastic regions occur, aiming for a more economically efficient retrofit design and enhanced seismic performance.

The effects of analogy teaching on sport skill acquisition in children

Introduction: Teaching motor skills to novices has been the main task of physical educators, and studies in motor learning have always sought to discover better ways to optimize the skill acquisition process. Movement information is presented transparently through the performer’s demonstration, illustration, feedback, and verbal guidance in motor skills instructing. This study seeks to determine the type of learning, i.e., analogy learning or explicit learning, suitable for promoting the children’s acquisition of skills that are biomechanically and kinematically different from the same skill learned by explicit instructions, and to determine how the physical form of the skill evolves over practice. Material and Methods: Forty-five right-handed healthy beginner male students (mean age 9.93 ±0.55 years; height 1.39 ±4.16 m; body mass 31.65±3.23 kg; novice in basketball) participated in the study. Subjects were randomly allocated to an explicit learning condition (n = 15), an analogy learning condition (n = 15), or an uninstructed control condition (n = 15). Ten free throws (FT) in the standing position were performed with the right hand by each student using modified equipment i.e., a small ball, customized rim with 45-cm circumference and adapted net height of 2 m. Attempts were recorded from 3 m away in a biomechanical laboratory with two-dimensional (2D) video data collection (i.e., using 240 Hz camera resolution). Results: The independent ANOVA yielded a statistically significant effect across the three groups in post-tests: F (8,16) = 283.233, P = 0.001, η2 = 0.793. A statistically significant difference was observed across the three groups: F (8, 16) = 332.057, P = 0.001, η2 = 0.818. Discussion: The analogy group's performance was significantly better in the skill taught. The explicit learners achieved lower scores compared to the analogy learners. Conclusions: The analogy learning training method is recommended for children aged 10–12 willing to learn FT in basketball. The conclusions may be important for coaches concerning the use of different training methods in skill learning.

Effects of Red and Blue Light on the Growth, Photosynthesis, and Subsequent Growth under Fluctuating Light of Cucumber Seedlings.

The effects of red and blue light on growth and steady-state photosynthesis have been widely studied, but there are few studies focusing on dynamic photosynthesis and the effects of LED pre-treatment on cucumber seedlings' growth, so in this study, cucumber (Cucumis sativus L. cv. Jinyou 365) was chosen as the test material. White light (W), monochromatic red light (R), monochromatic blue light (B), and mixed red and blue lights with different red-to-blue ratios (9:1, 7:3, 5:5, 3:7, and 1:9) were set to explore the effects of red and blue light on cucumber seedlings' growth, steady-state photosynthesis, dynamic photosynthesis, and subsequent growth under fluctuating light. The results showed that compared with R and B, mixed red and blue light was more suitable for cucumber seedlings' growth, and the increased blue light ratios would decrease the biomass of cucumber seedlings under mixed red and blue light; cucumber seedlings under 90% red and 10% blue mixed light (9R1B) grew better than other treatments. For steady-state photosynthesis, blue light decreased the actual net photosynthetic rate but increased the maximum photosynthetic capacity by promoting stomatal development and opening; 9R1B exhibited higher actual net photosynthetic rate, but the maximum photosynthetic capacity was low. For dynamic photosynthesis, the induction rate of photosynthetic rate and stomatal conductance were also accelerated by blue light. For subsequent growth under fluctuating light, higher maximum photosynthetic capacity and photoinduction rate could not promote the growth of cucumber seedlings under subsequent fluctuating light, while seedlings pre-treated with 9R1B and B grew better under subsequent fluctuating light due to the high plant height and leaf area. Overall, cucumber seedlings treated with 9R1B exhibited the highest biomass and it grew better under subsequent fluctuating light due to the higher actual net photosynthetic rate, plant height, and leaf area.

Cloning and functional characterization of the peptide deformylase encoding gene EuPDF1B from Eucommia ulmoides Oliv

Peptide deformylase can catalyse the removal of formyl groups from the N-terminal formyl methionine of the primary polypeptide chain. The peptide deformylase genes of a few herbaceous plants have been studied to some extent, but the peptide deformylase genes of woody plants have not been studied. In this study, we isolated EuPDF1B from Eucommia ulmoides Oliv. The full-length sequence of EuPDF1B is 1176 bp long with a poly-A tail and contains an open reading frame of 831 bp that encodes a protein of 276 amino acids. EuPDF1B was localized to the chloroplast. qRT‒PCR analysis revealed that this gene was expressed in almost all tissues tested but mainly in mature leaves. Moreover, the expression of EuPDF1B was enhanced by ABA, MeJA and GA and inhibited by shading treatment. The expression pattern of EuPDF1B was further confirmed in EuPDF1Bp: GUS transgenic tobacco plants. Among all the transgenic tobacco plants, EuPDF1Bp-3 showed the highest GUS histochemical staining and activity in different tissues. This difference may be related to the presence of enhancer elements in the region from − 891 bp to − 236 bp of the EuPDF1B promoter. In addition, the expression of the chloroplast gene psbA and the net photosynthetic rate, fresh weight and height of tobacco plants overexpressing EuPDF1B were greater than those of the wild-type tobacco plants, suggesting that EuPDF1B may promote the growth of transgenic tobacco plants. This is the first time that PDF and its promoter have been cloned from woody plants, laying a foundation for further analysis of the function of PDF and the regulation of its expression.

Light Intensity: A Key Ecological Factor in Determining the Growth of Pseudolarix amabilis Seedlings

The notable absence of juvenile Pseudolarix amabilis trees in forest understories suggests their vulnerability to ecological niche competition, leading to limited survival prospects. This study examines the key factors limiting the growth of P. amabilis seedlings by investigating the effects of five ecological factors: light intensity, rainfall, groundwater level, soil type, and type of fertilization, on the growth of one-year-old P. amabilis seedlings. Our results demonstrate that increasing the light intensity promotes plant growth by augmenting the leaf count, leaf biomass, plant height, stem biomass, root biomass, and total biomass. Further analysis reveals that increased light intensity influences biomass allocation, reducing the specific leaf area and leaf–stem biomass ratio, and favoring root and stem growth over leaf investment. Rainfall, groundwater level, fertilization type, and rhizosphere soil type primarily influence root growth by impacting the soil’s physicochemical properties. Specifically, rising groundwater levels lower the soil temperature and increase the soil moisture, total potassium content, and soil pH, leading to reductions in root biomass, plant height, net height increment, leaf number, and total biomass. When groundwater levels reach 21 cm and 28 cm, submerging the surface soil layer, root biomass decreases by 1.6 g/plant (−51.6%) and 2.3 g/plant (−74.2%), respectively. Further analysis reveals a gradual decrease in the root–shoot ratio above the 14 cm groundwater level, while the specific leaf area and leaf–stem biomass ratio remains unaffected, indicating stronger belowground root stress compared to aboveground stem and leaf components. The results highlight light intensity as the key ecological factor determining the growth of P. amabilis seedlings. These findings underscore the importance of considering light intensity in the management of natural stands, the cultivation of artificial forests, and the nursery cultivation of endangered P. amabilis.

Adubação fosfatada, biofertilizante e Bacillus sp. no cultivo de amendoim sob estresse salino

ABSTRACT Peanut (Arachis hypogaea) is an important agricultural crop in Brazil, considered one of the most important oilseed crops cultivated. The use of fertilizer-solubilizing bacteria can mitigate salt stress. The objective of this study was to evaluate the gas exchange, growth, and water use efficiency of the peanut crop irrigated with brackish water under phosphate fertilization and inoculated with bacteria of the genus Bacillus sp. The experimental design used in this study was completely randomized, in a 4 × 2 × 2 factorial scheme, with 5 replicates, referring to the forms of fertilization (F1 - 0% phosphorus, F2 - 50% phosphorus, F3 - 100% phosphorus, and F4 - bovine biofertilizer), presence and absence of the inoculant and two levels of electrical conductivity of the irrigation water (ECw - 0.3 and 4.0 dS m-1). Fertilization with organic fertilizer (100% biofertilizer) and mineral fertilizer (50 and 100% phosphorus) associated with Bacillus sp. mitigated the damage caused by salt stress and promoted greater water use efficiency, chlorophyll index, internal CO2 concentration and stem diameter. The control treatment (without phosphate fertilization and without salt stress) and the application of Bacillus sp. promoted greater performance in net photosynthesis, transpiration rate, stomatal conductance, and plant height in peanut plants.

Modified mangrove pens for polyculture system in mud crab (Scylla serrata) and milkfish (Chanos chanos) production

The mangrove pens were modified to produce mud crab (Scylla serrata) and milkfish (Chanos chanos) in a polyculture system. The modification of mangrove pens was done by adding excavations inside the pen. The water quality parameters (dissolved oxygen (DO), pH, salinity, and temperature) were monitored, and the recovery and production rates in each pen were evaluated. The experiment was conducted for a rearing period of 143 days in nine mangrove pens, each having an area of 32 m2 and an average net enclosure height of 3 m from the soil surface. The three different pens constructed (existing design: canal only, 43% excavation by area, and 54% excavation by area) were designated as T1, T2, and T3, respectively. The water quality parameters recorded in the pens were favorable for the growth and recovery of the mud crab and milkfish, except for DO. For mud crab, the highest mean recovery was recorded in T2, followed by T3, and the lowest in T1. The production rate followed the same pattern as the recovery, with T2 having the highest, followed by T3, and T1 having the lowest. The statistical analysis revealed that the variations in mud crab recovery were not significant, while in terms of production rate, modified mangrove pens were found to be more effective than the existing design. Due to the total mortality of the cultured milkfish, the current set-up of modified mangrove pens was found to be unsuitable for the polyculture system of milkfish and mud crab production.

Effect of changes in the net height, court size, and serve limitations on technical-tactical, physical, and psychological aspects of U-14 female volleyball matches.

The objective was to analyze the effect of a reduction of the net height and the court size and serve limitations on the technical-tactical actions, physical actions, and psychological aspects in youth volleyball players. The sample was 29 under-14 female volleyball players (three regional club teams). A quasi-experimental design was implemented to assess the effect of modification in three tournaments. The independent variables were: a) official rules tournament (no changes in the rules), b) Experimental Tournament 1 (reduction in the net height from 2.10 m to 2 m, no jump serves, and a maximum of two serves per player and rotation), and c) Experimental Tournament 2 (reduction in net height from 2.10 m to 2 m, reduction in court size from 9 × 9 m to 8 × 8 m, no jump serves, and a maximum of two serves per player and rotation). The dependent variables were: ball contact done (type), quality and efficacy of the technical actions, team game phases occurrence, quality and efficacy, continuity index, number of jumps, player's jump load in the take-off and landing, number of hits, average heart rate, Rate of Perceived Effort, time between ball contacts, serve velocity, perceived individual and collective self-efficacy, perceived enjoyment, and perceived satisfaction. Experimental Tournament 1 involved an increase in the efficacy of serves and a decrease in the efficacy of side-out phases. The imbalance between serve and reception did not impact game continuity but reduced the attack and blocks. Experimental Tournament 2 involved a decrease in the efficacy of serves and an increase in the efficacy of side-out phases. The balance between serve and reception increased reception efficacy, the occurrence of attacks and blocks, game continuity, and players' effort. players' effort. Scaling the net and court and adapting the serve rules (Experimental Tournament 2) resulted in game dynamics for these U-12 teams that were more similar to those of posterior stages of player through the balance between serve and reception and the adaptation of the net height and court size.

Effect of Modifying Net Height and Court Size on Children's Badminton Performance

Effect of Modifying Net Height and Court Size on Children's Badminton Performance

Second-order wave loads on a floating bridge of T-type cross section

An analytical model for the complete second-order wave loads on a floating bridge of T-type cross section is established within the framework of potential flow theory. The first-order problem is solved using the matched eigenfunction expansion method (MEEM). Meanwhile, the second-order wave loads are divided into two distinct parts which are computed separately. The first part is dependent on the quadratic products of the first-order velocity potential and its derivative. It has been evaluated through two different ways. One is based on a direct pressure integration, i.e., a near-field method. To ensure a high accuracy of the computation, a local expansion is applied to determine the spatial derivative of the first-order velocity potential at a sharp corner. The other is based on the momentum conservation over a control volume. The effect of the control surface location on the computation has been discussed. In addition, the two proposed methods have been applied to both the time-independent wave-load component as well as the second-harmonic component, respectively. The second part of the complete second-order wave loads is due to the second-order velocity potential. It is evaluated based on an indirect method by introducing an auxiliary potential. Detailed numerical investigation is then conducted. The influence law of the sectional geometric parameters on the second-order wave loads is investigated. The numerical results reveal that the cantilever plate imposes an apparent protection effect on the inner web beam. Such effect gets obviously enhanced as the section net width or section height decreases or as the plate width or draft increases.

An Investigation of a Post-tension Problem in a Conference Hall Roof

Introduction: Post-tensioning is a technique for strengthening concrete members by embedding tendons into the concrete before casting. When the concrete has acquired the desired strength, these tendons are tensioned using hydraulic jacks. This study deals with structurally analyzing and designing a 21 m × 25 m conference hall without interior columns contained within eleven stories building. Methods: The hall was located on the 9th floor. Many structural floor systems were proposed for the hall such as composite steel-concrete, waffle concrete, and post tensioned girder slab. The structural system of post-tensioned concrete girders with a top reinforced slab was chosen due to its advantages: low deflection and low risk of cracking, and increase of net floor height. Stressing of strands (live ends) was applied from the four sides of the concrete slab. Twenty-three live ends were placed in north-south direction and 20 live ends in east-west direction. Results: The ultimate strength of the stands was 1860 MPa. The jacking force, 209 kN, was applied in each strand which represented 75% of ultimate strength. The post-tension concrete slab was analyzed with Ram concept software, which revealed that the total elongation of strands in the E-W direction ranged from 116 mm to 152 mm, and the total elongation of strands in the N-S direction ranged from 120 mm to 172 mm. Conclusion: The problem of warping of nine live anchorage ends in the south-north direction was encountered during post-tensioning, which resulted in the movement of strands from their original locations. A rehabilitation plan was proposed to overcome the aforementioned problem.

Waterlogging increases greenhouse gas release and decreases yield in winter rapeseed (Brassica napus L.) seedlings

A sustainable future depends on increasing agricultural carbon (C) and nitrogen (N) sequestration. Winter rapeseeds are facing severe yield loss after waterlogging due to the effects of extreme rainfall, especially in the seedling stage, where rainfall is most sensitive. Uncertainty exists over the farming greenhouse gas (GHG) release of rapeseed seedlings following the onset of waterlogging. The effect of waterlogging on GHG release and leaf gas exchange in winter rapeseed was examined in a pot experiment. The experiment included waterlogging treatments lasting 7-day and 21-day and normal irrigation as a control treatment. According to our findings, (1) The ecosystem of rapeseed seedlings released methane (CH4) and nitrous oxide (N2O) in a clear up change that was impacted by ongoing waterlogging. Among them, N2O release had a transient rise during the early stages under the effect of seedling fertilizer. (2) The net photosynthetic rate, transpiration rate, stomatal conductance, plant height, soil moisture, and soil oxidation–reduction potential of rapeseed all significantly decreased due to the ongoing waterlogging. However, rapeseed leaves showed a significant increase in intercellular carbon dioxide (CO2) concentration and leaf chlorophyll content values after waterlogging. Additionally, the findings demonstrated an extremely significant increase in the sustained-flux global warming potential of the sum CO2-eq of CH4 and N2O throughout the entire waterlogging stress period. Therefore, continuous waterlogging can increase C and N release from rapeseed seedlings ecosystem and decrease yield. Therefore, we suggest increasing drainage techniques to decrease the release of agricultural GHGs and promote sustainable crop production.

Research on standardization and quantitative extraction of information of ancient building components based on BIM

Abstract The standardization and quantitative extraction of component information are accomplished by establishing an information model of ancient buildings. Based on BIM technology, i.e., model visualization, virtual simulation and BIM-related software, this paper combines the dimensional types of components to realize the parameterization settings of components and further designs the information structure of ancient building components. The standardization rate, repetition rate, repeatability coefficient, and standardization coefficient of the components were calculated by quantitative methods, followed by the determination of standardized components and the quantitative extraction of component attribute features based on the BIM model map. Based on the standardization of the information of the five-room, nine-purlin-hipped ancient building members based on BIM, the spatial location of the ancient building members was determined with the following parameters: bucket size 32.5 mm, eaves height 2180 mm, net height 1802.8 mm, and side legs 23.1 mm. BIM application provides a new way of thinking for archiving and protecting ancient architectural data.

Numerical Modeling of the Section Properties of Cross Laminated Timber

直交集成板(Cross-Laminated Timber)，以下簡稱CLT，質量輕約為鋼筋混凝土重量之0.2倍，具有經濟及自然材料循環再生的特性。CLT板材使用在鋼結構高層建築樓板上因現場組裝便利、迅速，更因為自重輕，可以降低各樓層的重量因而減少設計地震力，使梁柱結構尺寸斷面變小，可提升樓層高度之淨高及增加平面使用之面積。世界各地因為地理環境的不同，各國皆有專屬的特有樹種，以日本為例，將CLT產品性能最佳及經濟化，發展出外層為扁柏內層為杉木之CLT產品。為提供結構設計者一種迅速、可靠的應力分析方式，本次研究以驗證之方式探討CLT案例試驗資料與數值模擬分析結果進行兩者斷面性質比較，藉此結果提出當CLT其集成元具不同斷面組合時，可以運用模擬方式求得彎曲彈性係數E，並在不同支承邊界條件、不同載重形式時，提供精準之斷面應力分析。The light weight of the Laminated of Timber, CLT, is about 0.2 times the weight of the concrete. It is also economical and recyclable from natural materials. CLT panel used in high-raise steel buildings, in addition to the convenience and speed of on-site assembly, CLT flooring panel can reduce the weight of each floor due to its light weight, thereby reducing the design seismic force, making the size and cross-section of the beam-column structure smaller, and increasing the net height of the floor height and the usable area indoor. Nowadays, due to the different geographical environments around the world, each country has its own exclusive tree species. In addition, Japan has developed CLT products with the outer layer of cypress and the inner layer of fir for optimizing the performance and economy of CLT products. In order to provide structural designers with a rapid and reliable stress analysis method, this study discusses the CLT test data and numerical simulation results in a verification way to compare the cross-section properties of these two. The results suggest that when CLT has different integrated component sections, the bending elastic coefficient E can be obtained by simulation, and accurate section stress analysis can be provided under different support boundary conditions and different load forms.

Fences are more effective than repellents in reducing deer browsing on planted two conifer species but their effectiveness is reduced by higher deer density, deeper snow, and steeper slope

Population expansion of deer and the damage to planted trees caused by them is becoming a serious conflict between deer and humans. Although there are many methods for tree protection, their effectiveness varies from case to case, and the determinant of effectiveness has rarely been clarified. We investigated the following three specific questions: 1) What factors influence forest managers' choice of protection methods? 2) What factors were important in reducing tree damage by each protection method? 3) Which of the repellents and fences was more effective in reducing tree damage? In 2018, we obtained data of plantation tree damages caused by sika deer (Cervus nippon) and tree protection methods from 1424 plantations in Japan. No protection was chosen at low deer densities, and repellents and fences were chosen at middle and high densities by forest managers. In the case of repellents, the damage rank increased with increasing deer density, tree age, and maximum snow depth, but was not affected by planted tree species (Cryptomeria japonica and Chamaecyparis obtusa). In the case of fences, the damage rank increased with increasing deer density, tree age, maximum snow depth, slope, and decreasing net height. The damage rank also increased with the usage of separable digging prevention net and the net without stainless wire. When the age of planted trees is seven, repellents can suppress the tree damage under 50% only when the deer density is below 10 deer/km2 (no snow) or 6 deer/km2 (snow depth is 16 cm). Fences can suppress tree damage below 50% when deer density was below 38 deer/km2 (snow depth: 0, slope: 35°) or 25 deer/km2 (snow depth: 16, slope: 35°). Deer protection methods should be selected according to environmental conditions such as deer density, snow depth, and slope degree in the case of our treated tree species.

Coupling Simulation of Longitudinal Vibration of Rod String and Multi-Phase Pipe Flow in Wellbore and Research on Downhole Energy Efficiency

The wellbore of a sucker–rod pumping well experiences a multi–phase flow consisting of oil, gas, and water. The flow pattern and pump discharge pressure are greatly impacted by oil well production, which in turn significantly affects the simulation results of longitudinal vibration in the sucker–rod string. When calculating the discharge pressure in a hydrostatic column containing both oil and water (HC), the pressure is not affected by the oil well’s production. This thereby avoids interference between vibrations in the sucker–rod string’s longitudinal direction and the flow from the wellbore. Considering the coupling characteristics between the longitudinal vibration of the sucker–rod string and the wellbore flow, a mathematical model of the sucker–rod pumping system (CMSRS) and a mathematical model of the downhole energy efficiency parameters were established. In detail, the CMSRS comprises two parts: the discharge pressure mathematical models of multi–phase flow dynamics (MD) and the wave equation of the longitudinal vibration of the sucker–rod string. A numerical simulation model of the sucker–rod pumping system was constructed based on a mathematical model. We compared the experimental results, the simulation results of the CMSRS and the simulation results of the sucker–rod string based on the oil–water two–phase hydrostatic column (SMSRS) and found good agreement, indicating the feasibility of the CMSRS. The simulation details show the following: (1) The HC model’s discharge pressure exceeds that of the MD model by more than 33.52%. The polished rod load for the CMSRS is 18.01% lower than that of the SMSRS, and the pump input power for the CMSRS is 36.23% lower than that of the SMSRS. (2) The effective power simulation model based on the energy balance relationship is essentially the same as the effective power calculated by the model based on multi–phase flow effective power. This validates the accuracy of the multi–phase flow effective power model. (3) The limitations of the industry standard effective power model are that (i) the effective head is the net lift height of the fluid in the wellbore reduced to the oil and water phases rather than the effective lift height based on the energy balance relationship and (ii) the power of the gas phase delivered by the pumping pump is disregarded, and only the effective power of the pump delivering the oil–water mixture is considered. (4) The influence of the wellbore parameters on the wellbore efficiency and sub–efficiency is systematically analyzed. The analysis results have an important significance in the guidance of energy saving in pumping wells.

Morphology of impact fragmentation distribution of single spherical and ellipsoidal particles in drop weight experiments

Particle shape is an important factor affecting the fragmentation distribution of the ore particles. To investigate the influence of particle shape on the morphological fragmentation distribution characteristics, the crushable ore particles are defined as prolate, oblate ellipsoid and spherical particles, which have different aspect ratios (AR) and sphericity (S). Based on the drop weight experiment, the influence of the net drop height on the macroscopic mechanical behavior and crushing distribution characteristics of the single spherical and ellipsoidal particles is studied. The results show that different peak-shifting characteristics exist during particle fragmentation. The fragmentation distribution peak shifts left when the increased impact energy is eventually only enough to break medium-sized sub-particles. Conversely, it shifts right when impact energy is increased enough to break largest-sized sub-particles. Besides, regardless of whether the net drop height changes, the maximum continuous fragmentation degree presents “M”-shaped characteristic with the increased AR. Compared with the ellipsoid particles, the single spherical particle is more difficult to be broken by impact, with wider equivalent particle fragmentation distribution. With the increase of particle sphericity, the maximum continuous fragmentation degree of a single ellipsoid particle has an overall trend of initial increase and subsequent decrease. Especially when particle sphericity is 0.9 < S < 0.95, the maximum continuous fragmentation degree of both prolate and oblate ellipsoid particles is much higher.

Investigating the temperature distribution of non-enclosed atriums with air infiltration in winter

Low-temperature air infiltration and vertical thermal stratification lead to an unsatisfied bottom-occupied environment of the atrium and increase the space heating load in winter. An integrated prediction model was proposed regarding the interaction between thermal stratification and air infiltration. It includes the extended Block model for predicting the vertical temperature distribution in a non-enclosed atrium, the air infiltration model for calculating the buoyancy-driven air infiltration rate, and the Velocity propagating model for describing the airflow pattern within a foyer. By applying this model, we quantitatively analysed the indoor thermal characteristics in different atrium/foyer spatial morphologies. Beyond the indoor net height, the atrium diameter is also a dominant factor affecting the flow rate of air infiltration introduced from the foyer. The lower the section aspect ratio (SAR) and the higher the bottom floor height of the atrium, the warmer the bottom-occupied environment. The foyer's buffer effect mainly promotes occupants' thermal comfort, as lengthening the foyer length increases the heating load of air infiltration into the atrium while helping reduce the horizontal temperature gradient (HTG) when occupants walk across. This study clarified the indoor environmental characteristics in such spaces in winter and explored the interrelated influencing factors. The methodology and conclusions provide insights into practical engineering.