Negative Ion Research Articles

Mixed-cation, mixed-halide perovskite ToF-SIMS spectra

We report positive and negative ion time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectra of metal-halide perovskite (MHP) films used for photovoltaic applications. This ToF-SIMS spectral library is of importance because it identifies the major peaks in most MHP films from organic [formamidinium (FA+)] and inorganic (Cs+) cations and anions (I− and Br−).

The energy dissipation of a test-charge particle within a dense, degenerate electron- positron-ion plasma

The energy loss of a moving test-charge particle is studied in a degenerate quantized plasma, whose constituents are the electrons, positrons, and ions. The electrons and positrons are assumed to be quantized and degenerate species, whereas positive ions are treated classically. Relying on the kinetic formalism, an expression for the test-charge potential is derived with a modified dielectric response function involving the ion-acoustic oscillations. The energy loss or stopping power is solvedas a function of a test-charge speed, which is significantly affected by the positron concentration, the electron and positron quantization factors and plasma parameters. It is examined that quantization and quantum parameters lead to the enhancement of energy loss in an electron-positron-ion (EPI) dense plasma. The present findings may prove useful to understand the test-charge response in degenerate dense plasmas, where electrons and positrons are quantized in the strong magnetic fields.

Qualitative analysis of licorice and strychnine decoction before and after combination using UPLC-QE-Orbitrap-MS.

Glycyrrhiza glabra L. (GG) and Strychnos nux-vomica L. (NV) are traditional Chinese medicines (TCMs). Changes in the chemical composition may occur before and after the GG-NV compatibility. Ultra-performance liquid chromatography Q-exactive Orbitrap mass spectrometry (UPLC-QE-Orbitrap-MS) was applied here to study the difference in the components of the GG and NV decoctions before and after they were combined. The changes in the chemical composition of GG and NV before and after the combination were determined. The precise molecular weight, retention time, and fragment ion peak of the different components of the decoctions before and after compatibility were obtained through UPLC-QE-Orbitrap-MS. Differential analysis methods, such as principal component analysis, were used for comparison. In the positive ion mode, 200 new components were added, whereas six components were lost. In the negative ion mode, 144 new compounds were identified, whereas three components were missing. The compatibility difference between GG and NV was studied through UPLC-QE-Orbitrap-MS. The chemical composition of GG and NV changed before and after compatibility, and a class of compounds different from GG and NV was identified in the co-decoction. This study provides an experimental basis for subsequent research into detoxification mechanisms of the GG-NV combination and offers a new analytical method for investigating the compatibility of various other TCM pairs.

Untargeted serum metabolic profiling of diabetes mellitus among Parkinson’s disease patients

Type 2 diabetes mellitus (T2DM) is a common comorbidity among Parkinson’s disease (PD) patients. Yet, little is known about dysregulated pathways that are unique in PD patients with T2DM. We applied high-resolution metabolomic profiling in serum samples of 636 PD and 253 non-PD participants recruited from Central California. We conducted an initial discovery metabolome-wide association and pathway enrichment analysis. After adjusting for multiple testing, in positive (or negative) ion mode, 30 (25) metabolic features were associated with T2DM in both PD and non-PD participants, 162 (108) only in PD participants, and 32 (7) only in non-PD participants. Pathway enrichment analysis identified 17 enriched pathways associated with T2DM in both the PD and non-PD participants, 26 pathways only in PD participants, and 5 pathways only in non-PD participants. Several amino acid, nucleic acids, and fatty acid metabolisms were associated with T2DM only in the PD patient group suggesting a possible link between PD and T2DM.

Phytochemical Profiling of Phragmites australis Leaf Extract and Its Nano-Structural Antioxidant, Antimicrobial, and Anticancer Activities

AbstractFreshwater macrophytes have attracted interest as an alternative source of natural extracts and minerals for a variety of therapeutic uses. However, few studies have rigorously investigated the phytochemical components, properties, and potential biological benefits of Phragmites australis as an emergent macrophyte. This study investigates the phytochemical profile of aqueous Phragmites australis (PAE) leaves extract using chromatographic-mass spectrometry and free radical scavenging analysis. LC-QToF-MS/MS analysis in both positive and negative ionization revealed the existence of thirty and eleven bioactive compounds, respectively tentatively identified as alkaloids, flavonoids, indoles, glycosides, and quinolines from the extract. The polyphenolic content of the PAE was found to be 39.17 ± 0.65 mg GAE/g total phenol, while the flavonoids content was 19.85 ± 2.64 mg QE/g, and proanthocyanins content was 119.65 ± 1.70 CE/g. The PAE was utilized to synthesize silver nanoparticles (AgNPs) to evaluate its nano-structural formation efficiency, with the PAE displaying a greater ability to scavenge free radicals against ABTS, DPPH, and FRAP when compared with PA-AgNPs. Both PAE and PA-AgNPs were tested for their antimicrobial and anticancer activities and the results indicated that PA-AgNPs (MIC value range of 7.8–62.5 µg/mL) had excellent antimicrobial activity, compared to PAE. Moreover, the antiproliferative effect of PA-AgNPs on human cancer cells showed a higher cell-specific dose response and two-fold apoptotic induction with increased phosphorylation in the DNA ss-strand break post-treatment in MCF-7 than in A549 cells. These findings reveal the potential of the leaf extract of PA as a potent antioxidant source for many biological applications.

Codetermination of antimicrobial agents in rabbit tear fluid using LC-MS/MS assay: Insights into ocular pharmacokinetic study.

Managing ocular microbial infections typically requires pharmacotherapy using antibiotic eye drops, such as moxifloxacin hydrochloride (MFX), combined with an antifungal agent like amphotericin B (AB). We carried out and validated an LC-MS/MS assay to quantify these compounds in rabbit tear fluid in order to look into the pharmacokinetics of these two drugs. We employed a protein precipitation technique for the extraction of drugs under examination. A Waters Symmetry C18 column was used to separate the analytes and internal standard. The composition of the mobile phase was like (A) 0.1% v/v formic acid in water and (B) methanol. The detection of MFX and AB was accomplished through the utilization of positive ion electrospray ionization under multiple reaction monitoring mode. The linearity curves for both analytes exhibited an acceptable trendline across a concentration range of 2.34-300 ng/mL for MFX and 7.81-1000 ng/mL for AB in surrogate rabbit tear fluid. The lower limit of quantitation for MFX was 2.34 ng/mL, while for AB, it was 7.81 ng/mL. The approach was strictly validated, encompassing tests of selectivity, linearity (with r2>0.99), precision, accuracy, matrix effects, and stability. Consequently, we employed this method to evaluate the pharmacokinetics profiles of MFX and AB in rabbit tear fluid following single topical doses.

Development and validation of a UHPLC-ESI-MS/MS method for the simultaneous determination of organic acids and phenolic compounds in Filipendula vulgaris, Polygonum divaricatum, Hypericum linarioides, and Rheum ribes

This research focused on investigating biologically active and pharmaceutically important phytochemicals using reliable and reproducible analytical techniques specifically designed for traditional medicinal plants. Considering the complex chemical diversity present in plant extracts, reliable identification methods are crucial. The goal of this study was to develop and validate a robust UHPLC-ESI-MS/MS method for the qualitative and quantitative analysis of organic acids (OAs) and phenolic compounds (PCs). With gradient elution of water containing 0.1 % formic acid and acetonitrile containing 0.1 % formic acid as the mobile phase, OAs and PCs were separated chromatographically on a C18 reversed-phase column. Through the use of an electrospray ionization source operating in negative ionization mode, these compounds were identified on a triple quadrupole tandem mass spectrometer. The validation results clearly indicate that the method exhibited linearity with a squared correlation coefficient (R2 ≥ 0.9986), demonstrating sensitivity (LOQ: 1.08 µg/L-10.79 µg/L), precision (RSD%≤2.73), and trueness (RE% ≤ 1.53) for the OAs and PCs found in the plants. The developed UHPLC-ESI-MS/MS method was successfully applied to the qualitative and quantitative analysis of OAs and PCs in Turkish plants, which are commonly used in traditional medicine. Our study identified a total of 12 OAs and PCs in F. vulgaris, 12 in P. divaricatum, 9 in H. linarioides, and 11 in R. ribes. In particular, gallic acid had the highest content in F. vulgaris (925.67 µg/g extract) and R. ribes (1358.78 µg/g extract), while H. linarioides (730.66 µg/g extract) and P. divaricatum (4003.02 µg/g extract) had relatively high levels of quinic acid. In conclusion, the developed UHPLC-ESI-MS/MS method allows the simultaneous analysis and quantification of 2 OAs and 33 PCs in plants and proves to be a valuable tool for evaluating the efficacy of traditional medicinal plants.

Identification, structure elucidation, and isomer differentiation of phenolic compounds of Chinese pepper cultivars by UPLC-ESI-Q-TOF-MS and their antioxidant activity.

A total of 43 compounds, including phenolic acids, flavonoids, lignans, and diterpene, were identified and characterized using UPLC-ESI-Q-TOF-MS coupled with UNIFI software. The identified flavonoids were mostly isomers of luteolin, apigenin, and quercetin, which were elucidated and distinguished for the first time in pepper cultivars. The use of multivariate data analytics for sample discrimination revealed that luteolin derivatives played the most important role in differentiating pepper cultivars. The content of phenolic acids and flavonoids in immature green peppers was generally higher than that of mature red peppers. The pepper extracts possessed significant antioxidant activities, and the antioxidant activities correlated well with phenolic contents and their molecular structure. In conclusion, the findings expand our understanding of the phytochemical components of the Chinese pepper genotype at two maturity stages. Moreover, a UPLC-ESI-Q-TOF-MS in negative ionization mode rapid methods for characterization and isomers differentiation was described.

Propagation of nanosecond discharge in an air gap containing a water droplet: modelling and comparison with time-resolved images

The plasma-water interface is a complex medium characterized by interesting physical and chemical phenomena useful for many applications such as water processing or material synthesis. In this context, optimizing the transport of reactive species from plasma to water is crucial, and it may be achieved by increasing the surface-to-volume ratio of the processed object. Herein, we study the characteristics of a streamer produced by nanosecond discharge in air gap with a droplet of deionized water. The discharge is characterized experimentally by electrical measurements as well as by 1 ns-intergated ICCD images. To report plasma properties that are not accessible through experiment, such as the spatio-temporal evolution of electron density, electric field, and space charge density, a 2D fluid model is developed and adapted to the experimental geometry. Due to the fast propagation of the ionization front, the droplet is considered as a solid dielectric. The model solves Poisson’s equation as well as the drift-diffusion equation for electrons, positive ions, and negative ions. The utilized transport coefficients are tabulated as a function of the reduced electric field. Helmholtz equations are also included in the model to account for photoionization. The electron impact ionization source obtained from the model is compared to experimental 1 ns-integrated ICCD images, and a good agreement is observed. Finally, the model is used to investigate the influence of droplet dielectric permittivity and wetting angle (the angle between a liquid surface and a solid surface) on the properties of the discharge. Overall, the data reported herein demonstrate that the model can be used to investigate plasma properties under different conditions.

Event driven high speed data acquisition with IEEE 1588 synchronization for long pulse operations of Indian Test Facility for ITER DNB

The Indian Test Facility (INTF) is a negative Hydrogen ion based 100 kV, 60A, 5 Hz modulated NBI system having duty cycle of 3 s ON time to 20 s OFF time. Prime objective of the facility is to characterize ITER Diagnostic Neutral Beam (DNB) with full specifications, prior to shipment and installation in ITER. In order to fully characterize ITER DNB, a matured Data Acquisition and Control system (DACS) is needed which will be responsible for supervisory control of the facility and for acquiring and monitoring signals at run time. Apart from conventional DACS, high speed data acquisition is needed for diagnostics and other signals with sampling rate requirements of 100 MS/s. For acquiring data from such systems it is imperative that the data be acquired only for certain duration on the occurrence of the event. Such acquisition systems are classified as event driven data acquisition system and are widely used in fusion engineering community.Development and implementation of high speed event driven data acquisition systems pose challenges in terms of data buffering, data streaming and synchronization. The precise timing of the event occurrence with respect to the main pulse should also be known for which a timing and synchronization system is needed. To fulfill this purpose, IEEE 1588 protocol offers a network based method of synchronizing multiple nodes based on Ethernet with sub microsecond accuracy. The present work describes the development of an event driven high speed data acquisition in synchronization with IEEE 1588 based timing network. The work proposes the time stamping of the event from synchronized network integrated with the event acquisition platform. The developed system has been tested for pulse durations longer than 3600 s. The performance of event data acquisition system has been thoroughly characterized and improved by applying various software optimizations in LabVIEW. The present work although intended to be used for INTF can be used for any such facility in fusion or other areas.The paper provides results of IEEE 1588 based timing network in various configurations and event data acquisition system developed on high speed FPGA controlled digitizer board with prototype results.

A dynamic kinetic resolution catalyzed by immobilized lipase coupled with a novel grinding immobilized oxovanadium：Kinetic model and performance

A dual immobilized lipase and oxovanadium co-catalyzed dynamic kinetic resolution (DKR) system was established and successfully applied to synthesize (R)-1-(3-Methoxyphenyl) acetate in batch, resulting in a key chiral intermediate of (S)-rivastigmine with highly yield (97.6 %), e.e (99.01 %) and selectivity Sel (99.4 %). Herein, oxovanadium was immobilized onto diatomite via grinding immobilization for the first time to access a novel immobilized oxovanadium (V-D) used to catalyze an in situ racemization of undesired enantiomer substrate. The racemization rate of hydrated vanadyl sulfate was found for the first time to be much higher than that of vanadyl sulfate without crystalline water because water molecules in the former may form ion clusters of solvation membranes to disperses the charge density of positive carbon ions and promote their stability. This grinding immobilization approach may become a promising alternative for the immobilization of metals, especially precious metals due to its low cost, high efficiency, easily separated and large reaction interface. The kinetic model of the kinetic resolution catalyzed by LA-MR was developed, which may obey the sequential mechanism with both substrate and product inhibition, while the in-situ racemization reaction catalyzed by V-D may comply with power law.

Development of Noninvasive Method for the Automated Analysis of Nine Steroid Hormones in Human Saliva by Online Coupling of In-Tube Solid-Phase Microextraction with Liquid Chromatography–Tandem Mass Spectrometry

Accurate measurement of steroid hormones is crucial to elucidate new mechanisms of action and diagnose steroid metabolism-related diseases. This study presents a simple, sensitive, and automated analytical method for nine representative steroid hormones. The method involves on-line coupling of in-tube solid-phase microextraction (IT-SPME) with liquid chromatography–tandem mass spectrometry (LC–MS/MS). The steroid hormones were extracted and enriched on a Supel-Q PLOT capillary column using IT-SPME. Subsequently, they were separated and detected within 6 min using a Discovery HS F5-3 column and positive ion mode multiple reaction monitoring system via LC–MS/MS. Calibration curves of these compounds using each stable isotope-labeled internal standard (IS) showed linearity with correlation coefficients greater than 0.9990 in the range of 0.01–40 ng/mL, with limits of detection (S/N = 3) of 0.7–21 pg/mL. Moreover, intra- and inter-day variations were lower than 8.1 and 15% (n = 6), respectively. The recoveries of these compounds from saliva samples were in the range of 82–114%. The developed IT-SPME/LC–MS/MS method of steroid hormones is a highly sensitive, specific, and non-invasive analytical method that allows extraction and enrichment with no organic solvents, and enables direct automated online analysis by simply ultrafiltrating a small sample of saliva.

Paper-in-Tip Bipolar Electrospray Mass Spectrometry for Real-Time Chemical Reaction Monitoring.

Capturing short-lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper-in-tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro-oxidation and electro-reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real-time monitoring of transient intermediates (such as N,N-dimethylaniline radical cation, dopamine o-quinone (DAQ) and sulfenic acid with half-lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s-1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)-catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation.

Paper‐in‐Tip Bipolar Electrospray Mass Spectrometry for Real‐Time Chemical Reaction Monitoring

Capturing short‐lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper‐in‐tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro‐oxidation and electro‐reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real‐time monitoring of transient intermediates (such as N,N‐dimethylaniline radical cation, dopamine o‐quinone (DAQ) and sulfenic acid with half‐lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s−1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)‐catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation.

Probing the activated complex of the F + NH3 reaction via a dipole-bound state

Experimental characterization of the transition state poses a significant challenge due to its fleeting nature. Negative ion photodetachment offers a unique tool for probing transition states and their vicinity. However, this approach is usually limited to Franck-Condon regions. For example, high-lying Feshbach resonances with an excited HF stretching mode (vHF = 2-4) were recently identified in the transition-state region of the F + NH3 → HF + NH2 reaction through photo-detaching FNH3− anions, but the direct photodetachment failed to observe the lower-lying vHF = 0,1 resonances and bound states due apparently to negligible Franck-Condon factors. Indeed, these weak transitions can be resonantly enhanced via a dipole-bound state (DBS) formed between an electron and the polar FNH3 species. In this study, we unveil a series of Feshbach resonances and bound states along the F + NH3 reaction path via a DBS by combining high-resolution photoelectron spectroscopy with high-level quantum dynamical computations. This study presents an approach for probing the activated complex in a reaction by negative ion photodetachment through a DBS.

Modulation of rhizosphere microbial community and metabolites by bio-functionalized nanoscale silicon oxide alleviates cadmium-induced phytotoxicity in bayberry plants

Cadmium (Cd) is an extremely toxic heavy metal that can originate from industrial activities and accumulate in agricultural soils. This study investigates the potential of biologically synthesized silicon oxide nanoparticles (Bio-SiNPs) in alleviating Cd toxicity in bayberry plants. Bio-SiNPs were synthesized using the bacterial strain Chryseobacterium sp. RTN3 and thoroughly characterized using advanced techniques. A pot experiment results demonstrated that Cd stress substantially reduced leaves biomass, photosynthesis efficiency, antioxidant enzyme activity, and induced oxidative damage in bayberry (Myrica rubra) plants. However, Bio-SiNPs application at 200 mg kg−1 significantly enhanced plant biomass, chlorophyll content (26.4 %), net photosynthetic rate (8.6 %), antioxidant enzyme levels, and mitigated reactive oxygen species production under Cd stress. Bio-SiNPs modulated key stress-related phytohormones by increasing salicylic acid (13.2 %) and abscisic acid (13.7 %) contents in plants. Bio-SiNPs augmented Si deposition on root surfaces, preserving normal ultrastructure in leaf cells. Additionally, 16S rRNA gene sequencing demonstrated that Bio-SiNPs treatment favorably reshaped structure and abundance of specific bacterial groups (Proteobacteria, Actinobacteriota, and Acidobacteriota) in the rhizosphere. Notably, Bio-SiNPs application significantly modulated the key metabolites (phenylacetaldehyde, glycitein, maslinic acid and methylmalonic acid) under both normal and Cd stress conditions. Overall, this study highlights that bio-nanoremediation using Bio-SiNPs enhances tolerance to Cd stress in bayberry plants by beneficially modulating biochemical, microbial, and metabolic attributes.

Diamond-like carbon conversion surfaces for space applications

We present diamond-like carbon (DLC) conversion surfaces to detect particles with energy below 2 keV. Conversion surfaces have been widely applied in measurements of low-energy particles by instruments onboard planetary and heliophysics missions. Their effectiveness is characterized by the efficiency in changing the charge state of the incident particles while maintaining a narrow angular distribution for the reflected particles. DLC as a conversion surface coating material has high conversion efficiency. We developed a conversion surface production process that provides ultra-smooth and ultra-thin DLC conversion surfaces. The process includes substrate preparation through precision cleaning, plasma immersion ion deposition of the DLC film, and diagnostics of the film parameters. The latter includes the measurement of the coating thickness, surface roughness, and the conversion efficiency for ion beams with energy below 2 keV. The process we developed provides the DLC conversion surface coating of repeatable parameters with a mean surface roughness of 3.4 ± 0.2 Å and a mean film thickness of 46.7 ± 0.8 nm uniform across the sample area. Ion beam measurements showed a negative ion yield of 1%–2% for hydrogen atoms and 8%–15% for oxygen atoms with an angular scatter distribution of 10°–20° at full width of half maximum. These results agree with those of other conversion surface coatings in the literature. The DLC conversion surfaces presented here are implemented in the conversion surface subsystem of the Interstellar Mapping and Acceleration Probe (IMAP)-Lo instrument of the IMAP mission scheduled for launch in 2025.

An Agile and Accurate Approach for N-Nitrosamines Detection and Quantification in Medicines by DART-MS.

N-nitrosamines (NAs) are prevalent mutagenic impurities in various consumer products. Their discovery in valsartan-containing medicines in 2018 prompted global regulatory agencies to set guidelines on their presence and permissible levels in pharmaceuticals. In order to determine the NAs content in medicines, efficient and sensitive analytical methods have been developed based on mass spectrometry techniques. Direct analysis in real time-mass spectrometry (DART-MS) has emerged as a prominent ambient ionization technique for pharmaceutical analysis due to its high-throughput capability, simplicity, and minimal sample preparation requirements. Thus, in this study DART-MS was evaluated for the screening and quantification of NAs in medicines. DART-MS analyses were conducted in positive ion mode, for both direct tablet analysis and solution analysis. The analytical performance was evaluated regarding linearity, precision, accuracy, limits of detection, and quantification. The DART-MS proved to be suitable for the determination of NAs in medicines, whether through direct tablet analysis or solution analysis. The analytical performance demonstrated linearity in the range from 1.00 to 200.00 ng mL-1, limits of quantification about 1.00 ng mL-1, precision and accuracy lower than 15%, and no significant matrix effect for six drug-related NAs. In conclusion, the DART-MS technique demonstrated to be an alternative method to determine NAs in medicines, aligning with the principles of green chemistry.

The Analysis of Leontopodium leontopodioides (Willd.) Beauv. Chemical Composition by GC/MS and UPLC-Q-Orbitrap MS.

Leontopodium leontopodioides (Willd.) Beauv. (L. leontopodioides.) has been used to treat lung diseases in traditional Chinese medicine (TCM). However, a systematic analysis of its chemical components has not been reported so far. In this study, UPLC-Q-Orbitrap MS and GC-MS were applied to investigate the chemical composition of the water extracts and essential oils of L. leontopodioides. UPLC-Q-Orbitrap MS adopts a heating electrospray ionization source, collecting primary and secondary mass spectrometry data in positive and negative ions, respectively, and uses Compound Discoverer 3.2 software to analyze the collected raw data. As a result, a total of 39 compounds were identified from their high-resolution mass spectra in both positive and negative ionization modes, including 13 flavonoids and their glycosides, 15 phenolic acids, 4 oligosaccharides and glycosides, 4 pentacyclic triterpenoids, and 3 other compounds. Among them, 18 chemical components have not been reported in L. leontopodioides. In the GC-MS section, two common organic solvents (n-hexane and diethyl ether) were used to extract essential oils, and the mass spectra were recorded at 70 eV (electron impact) and scanned in the range of 35∼450 m/z. Compounds were identified using NIST (version 2017), and the peak area normalization method was used to calculate their relative amounts. Finally, 17 components were identified in the volatile oil extracted with n-hexane, accounting for 80.38% of the total volatile oil, including monoterpenoids, phenylpropene, fatty acids, and aliphatic hydrocarbons. In the volatile oil extracted with diethyl ether, 16 components were identified, accounting for 73.50% of the total volatile oil, including phenylpropene, aliphatic hydrocarbons, monoterpenoids, fatty acids, and esters. This study was the first to conduct a comprehensive analysis of the chemical composition of the L. leontopodioides water extract and its essential oil, and a comprehensive chemical composition spectrum was constructed, to lay a foundation for its further pharmacodynamic material basis and quality evaluation.

Advanced UPLC-MS/MS Method for the Quantification of SIPI6398 in Rat Plasma and Its Pharmacokinetic Characterization.

SIPI6398 is a novel anti-schizophrenia agent with a new mechanism of action and demonstrates better target selectivity and safety compared to its competitors. However, few in vivo studies on the pharmacokinetics and bioavailability of SIPI6398 have been performed. A rapid and simple ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) approach was developed for accurate quantification of SIPI6398 in rat plasma. A simple protein precipitation of acetonitrile-methanol (9 : 1, v/v) was used to treat plasma. Chromatography was performed on a UPLC HSS T3 column (50 mm × 2.1 mm, 1.8 μm) at a flow rate of 0.4 ml/min. The mobile phase consisted of acetonitrile-water (with 0.1% formic acid) and gradient elution was used, and the elution time was 4 minutes. Quantitative analysis was performed using electrospray ionization (ESI) in positive ion detection mode with multiple reaction monitoring (MRM) mode. To evaluate the pharmacokinetics and bioavailability, SIPI6398 was administered to rats in two different ways: oral (4 mg/kg) and intravenous (2 mg/kg) administration. The calibration curve for the UPLC-MS/MS approach shows excellent linearity in the range of 1-2000 ng/mL with an r value above 0.99. The precision, accuracy, recovery, matrix effect, and stability results all meet the criteria established for biological analytical methods. The UPLC-MS/MS method was successfully applied it to pharmacokinetics study of SIPI6398. The bioavailability of SIPI6398 was calculated to be 13.2%. These studies have the potential to contribute towards a more comprehensive comprehension of the pharmacokinetics and bioavailability of SIPI6398.