Near-unity Photoluminescence Quantum Yield Research Articles

Boosting carrier transport via functionalized short-chain conjugated ligands enables efficient green perovskite quantum dot light-emitting diodes

Lead-halide perovskite quantum dots (QDs) have garnered significant attention in the field of light-emitting diodes (LEDs), owing to their near-unity photoluminescence quantum yield (PLQY) and superb color purity. However, the presence of insulating long-chain organic ligands and imbalanced carrier transport within QLED devices pose significant challenges to performance enhancement. To address these issues, a series of short-chain conjugated ligands based on 3-phenyl-2-propen-1-amine bromide (PPABr), tailored with diverse substituents, are developed. Through comprehensive theoretical calculations and experimental validation, it demonstrated that these ligands effectively modulate carrier transport in perovskite QDs, facilitating more efficient carrier transport pathways and enhanced conductivity through their delocalized electron cloud distributions along the entire molecular backbone. Consequently, QLEDs based on 4-CH3 PPABr QDs achieved an impressive external quantum efficiency (EQE) of 18.67 %, while a peak EQE of 23.88 % can be achieved by integrating a lens-based structure for optimized light extraction. This work offers a novel perspective for mitigating carrier transport imbalance in optoelectronic devices, thereby advancing the development of high-performance QLEDs.

Precise Regulation of the Reverse Intersystem Crossing Pathway by Hybridized Long-Short Axis Strategy for High-Performance Multi-Resonance TADF Emitters.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules have experienced great success in organic light-emitting diodes (OLEDs) owing to their outstanding quantum efficiencies and narrow full width at half-maximums (FWHMs). However, the reverse intersystem crossing (RISC) rates of MR-TADF emitters are usually small, which will lead to relatively long triplet exciton lifetime and severe efficiency roll-off. Here, we report an effective molecular design strategy to introduce multichannel RISC pathways and thus increase RISC rates without compromising the color fidelity and emission efficiency by the "hybridized long-short axis (HLSA)" strategy. The TPA-CN-BN shows a near-unity photoluminescence quantum yield, rapid RISC rate of 1.4 × 105 s-1, narrow FWHM of 23 nm, and small singlet-triplet energy gap (ΔEST) of 0.06 eV in solution. The non-sensitized OLED based on TPA-CN-BN exhibits a narrowband emission with the FWHM of 31 nm, in company with external quantum efficiency (EQE) of 37.9%. Notably, the device exhibits the low efficiency roll-off as the EQEs maintain 34.8% and 21.8% at 100 and 1000 cd m-2, respectively, representing the best performance for single-host OLEDs based on the BCzBN skeleton. This study provides a fresh and promising approach to realize high-performance OLEDs with high color purity and remarkable device efficiency.

Synthesis of a perovskite surface-coated polymer brush by photo-induced atom transfer radical polymerization

Lead halide perovskite nanocrystals (PNCs) are expected to be applied in the field of optoelectronics due to their color tunability, high color purity, and near-unity photoluminescence quantum yields. Moreover, the construction of nanocomposite structures with functional polymers has been reported to improve the material stability as well as the ordered structure with high orientation and periodicity. In this study, we demonstrated the synthesis of polymethyl methacrylate (PMMA) on the PNCs by surface-initiated polymerization. We synthesized PMMA polymer brushes by photo-induced atom transfer radical polymerization (p-ATRP) after coordinating the initiator on the PNC surface. We succeeded in obtaining PMMA-PNCs with a degree of polymerization of 21. Moreover, thermal stability tests showed that PMMA-PNCs achieved improved thermal stability compared to pristine-PNCs. This work can provide guidance for developing polymer brush-PNCs via surface-initiated polymerization.

Bright Nanocomposites based on Quantum Dot-Initiated Photocatalysis.

Integrating quantum dots (QDs) into polymer matrix to form nanocomposites without compromising the QD photoluminescence (PL) is crucial to emerging QD light-emitting and solar energy conversion fields. However, the most widely-used bulk polymerization technique, where monomers serve as the QD solvent, usually leads to QD PL quenching caused by radical initiators. Here we demonstrate high-brightness nanocomposites with near-unity PL quantum yield (QY), through a novel QDs-catalyzed (-initiated) bulk polymerization without using any radical initiators. Different from previous reports where QDs were designed as photo-sensitizers/catalysts (always with cocatalysts) and hence non-emissive in catalytic conditions, our QDs combine high brightness with highly effective catalysis, a combination that was previously considered to be hardly possible. In our case, apart from emitting light (at a large probability), the photoexcited QDs act as 'overall reaction' catalysts by simultaneously employing photoexcited electrons and holes to produce active radicals without the need of any sacrificial agents. These active radicals, though with a small amount, are sufficient to initiate effective chain reaction-dominated bulk polymerization, eliminating the requirement of extra radical initiators. This study provides new insights for understanding and development of QDs for energy applications.

Two-dimensional-lattice-confined single-molecule-like aggregates.

Intermolecular distance largely determines the optoelectronic properties of organic matter. Conventional organic luminescent molecules are commonly used either as aggregates or as single molecules that are diluted in a foreigner matrix. They have garnered great research interest in recent decades for a variety of applications, including light-emitting diodes1,2, lasers3-5 andquantum technologies6,7, among others8-10. However, there is still a knowledge gap on how these molecules behave between the aggregation and dilution states. Here we report an unprecedented phase of molecular aggregate that forms in a two-dimensional hybrid perovskite superlattice with a near-equilibrium distance, which we refer to as a single-molecule-like aggregate (SMA). By implementing two-dimensional superlattices, the organic emitters are held in proximity, but, surprisingly, remain electronically isolated, thereby resulting in a near-unity photoluminescence quantum yield, akin to that of single molecules. Moreover, the emitters within the perovskite superlattices demonstrate strong alignment and dense packing resembling aggregates, allowing for the observation of robust directional emission, substantially enhanced radiative recombination and efficient lasing. Molecular dynamics simulations together with single-crystal structure analysis emphasize the critical role of the internal rotational and vibrational degrees of freedom of the molecules in the two-dimensional lattice for creating the exclusive SMA phase. This two-dimensional superlattice unifies the paradoxical properties of single molecules and aggregates, thus offering exciting possibilities for advanced spectroscopic and photonic applications.

CsPbBr3@PbSO4 nanocomposites with near-unity photoluminescence and ultrastability via in-water in situ embedding synthesis strategy

Perovskite quantum dots (PQDs) are emerging as promising nanomaterials for optoelectronic applications. However, developing a cost-effective green synthesis process that simultaneously possesses satisfactory photoluminescence quantum yield (PLQY) and stability remains a severe challenge. Here, CsPbBr3@PbSO4 nanocomposites with a near-unity PLQY of 99.8 % and robust ambient stability are synthesized in situ in water via 4-Bromobenzenesulfonic acid and ditetradecylamine ligands. Notably, these nanocomposites show no decline in PLQY even after being immersed in water for over 250 days, and also exhibit superior stability against heating, ultrasonication, UV irradiation, anion exchange, and erosion by polar solvents. First-principles calculations reveal that CsPbBr3@PbSO4 nanocomposites can form a natural quantum well structure, which effectively promotes the radiative recombination of carriers in CsPbBr3 QDs. Meanwhile, the remarkable stability is attributed to the ultrahigh decomposition enthalpy of PbSO4 that serves as a strong barrier preventing the invasion of anions and polar media into the embedded CsPbBr3 QDs. Finally, besides the convenient application of green fluorescent paper, a fingerprint recognition is demonstrated by fabricating a bright-green LED integrated with the CsPbBr3@PbSO4 nanocomposites powder and a commercial UV chip. This work provides a new strategy for green synthesis and practical application of high-efficient and ultrastable PQDs.

Regional Functionalization Molecular Design Strategy: A Key to Enhancing the Efficiency of Multi-Resonance OLEDs.

Herein, we propose a regional functionalization molecular design strategy that enables independent control of distinct pivotal parameters through different molecule segments. Three novel multiple resonances thermally activated delayed fluorescence (MR-TADF) emitters A-BN, DA-BN, and A-DBN, have been successfully synthesized by integrating highly rigid and three-dimensional adamantane-containing spirofluorene units into the MR framework. These molecules form two distinctive functional parts: part 1 comprises a boron-nitrogen (BN)-MR framework with adjacent benzene and fluorene units forming a central luminescent core characterized by an exceptionally rigid planar geometry, allowing for narrow FWHM values; part 2 includes peripheral mesitylene, benzene, and adamantyl groups, creating a unique three-dimensional "umbrella-like" conformation to mitigate intermolecular interactions and suppress exciton annihilation. The resulting A-BN, DA-BN, and A-DBN exhibit remarkably narrow FWHM values ranging from 18 to 14 nm and near-unity photoluminescence quantum yields. Particularly, OLEDs based on DA-BN and A-DBN demonstrate outstanding efficiencies of 35.0 % and 34.3 %, with FWHM values as low as 22 nm and 25 nm, respectively, effectively accomplishing the integration of high color purity and high device performance.

Solution Synthesis and Light-Emitting Applications of One-Dimensional Lead-Free Cerium(III) Metal Halides.

Combining rare earth elements with the halide perovskite structure offers valuable insights into designing nonlead (Pb) luminescent materials. However, most of these compositions tend to form zero-dimensional (0D) networks of metal-halide polyhedra, with higher-dimensional (1D, 2D, and 3D) structures receiving relatively less exploration. Herein, we present synthesis and optical properties of Cs3CeCl6·3H2O, characterized by its unique 1D crystal structure. The conduction band minimum of Cs3CeCl6·3H2O becomes less localized as a result of the increased structural dimension, making it possible for the materials to achieve an efficient electrical injection. For both Cs3CeCl6·3H2O single crystals and nanocrystals, we also observed remarkable luminescence with near-unity photoluminescence quantum yield and exceptional phase stability. Cs3CeCl6·3H2O single crystals demonstrate an X-ray scintillation light yield of 31900 photons/MeV, higher than that of commercial LuAG:Ce (22000 photons/MeV); electrically driven light-emitting diodes fabricated with Cs3CeCl6·3H2O nanocrystals yield the characteristic emission of Ce3+, indicating their potential use in next-generation violet-light-emitting devices.

Carbon Quantum Dots with Highly Efficient Bandgap Emission for Electroluminescent Light-Emitting Diodes

Carbon quantum dots (CQDs) feature bright and tunable photoluminescence, solution processability, and low toxicity, showing great potential in optoelectronics. The multicolor fluorescent CQDs were first fabricated as active layers in our lab, and then the high-performance electroluminescent warm white light-emitting diodes (LEDs) were obtained with the synthesized bright red CQDs. More significantly, through designing the triangular structure of the carbon core, fluorescent CQDs first achieved the narrow-bandwidth (∼30 nm) electroluminescent LEDs with appreciable stability, high color purity, and high luminescence performance. These results lay the foundation for the development of next-generation high performance displays based on CQDs. Here, we will report the large-scale synthesis of CQDs with near-unity photoluminescence quantum yield and the synthesis of red (625 nm) phosphorescent carbon quantum dot organic frameworks (CDOFs) with a quantum yield of up to 42.3% and realization of high-efficiency red phosphorescent electroluminescent LEDs. The LEDs based on the CDOFs exhibited a red emission with a maximum luminance of 1818 cd m−2 and an EQE of 5.6%. This work explores the possibility of a new perspective for developing high-performance CQD-based electroluminescent LEDs.References Yuxin Shi, Louzhen Fan, et al., Red Phosphorescent Carbon Quantum Dot Organic Framework-Based Electroluminescent Light-Emitting Diodes Exceeding 5% External Quantum Efficiency, Am. Chem. Soc. 2021, 143, 45, 18941–18951Ting Yuan, Louzhen Fan, et al., Carbon Quantum Dots with Near-Unity Quantum Yield Bandgap Emission for Electroluminescent Light-Emitting Diodes, Angew. Chem. Int. Ed. 2023, e202218568.Fanglong Yuan，Louzhen Fan, et al., Engineering triangular carbon quantum dots with unprecedented narrow bandwidth emission for multicolored LEDs, Nat. Commun., 2018, 9, 2249. Figure 1

Photoluminescence of Chemically and Electrically Doped Two-Dimensional Monolayer Semiconductors.

Two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayers exhibit unique physical properties, such as self-terminating surfaces, a direct bandgap, and near-unity photoluminescence (PL) quantum yield (QY), which make them attractive for electronic and optoelectronic applications. Surface charge transfer has been widely used as a technique to control the concentration of free charge in 2D semiconductors, but its estimation and the impact on the optoelectronic properties of the material remain a challenge. In this work, we investigate the optical properties of a WS2 monolayer under three different doping approaches: benzyl viologen (BV), potassium (K), and electrostatic doping. Owing to the excitonic nature of 2D TMDC monolayers, the PL of the doped WS2 monolayer exhibits redshift and a decrease in intensity, which is evidenced by the increase in trion population. The electron concentrations of 3.79×1013 cm-2, 6.21×1013 cm-2, and 3.12×1012 cm-2 were measured for WS2 monolayers doped with BV, K, and electrostatic doping, respectively. PL offers a direct and versatile approach to probe the doping effect, allowing for the measurement of carrier concentration in 2D monolayer semiconductors.

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications.

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, whichcovers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

Surface-binding molecular multipods strengthen the halide perovskite lattice and boost luminescence

Reducing the size of perovskite crystals to confine excitons and passivating surface defects has fueled a significant advance in the luminescence efficiency of perovskite light-emitting diodes (LEDs). However, the persistent gap between the optical limit of electroluminescence efficiency and the photoluminescence efficiency of colloidal perovskite nanocrystals (PeNCs) suggests that defect passivation alone is not sufficient to achieve highly efficient colloidal PeNC-LEDs. Here, we present a materials approach to controlling the dynamic nature of the perovskite surface. Our experimental and theoretical studies reveal that conjugated molecular multipods (CMMs) adsorb onto the perovskite surface by multipodal hydrogen bonding and van der Waals interactions, strengthening the near-surface perovskite lattice and reducing ionic fluctuations which are related to nonradiative recombination. The CMM treatment strengthens the perovskite lattice and suppresses its dynamic disorder, resulting in a near-unity photoluminescence quantum yield of PeNC films and a high external quantum efficiency (26.1%) of PeNC-LED with pure green emission that matches the Rec.2020 color standard for next-generation vivid displays.

Near Ultraviolet-Excitable Cyan-Emissive Hybrid Copper(I) Halides Nonlinear Optical Crystals with Near-Unity Photoluminescence Quantum Yield and High-Efficiency X-ray Scintillation.

Designing and synthesizing multifunctional hybrid copper halides with near ultraviolet (NUV) light-excited high-energy emission (<500 nm) remains challenging. Here, a pair of broadband-excited high-energy emitting isomers, namely, α-/β-(MePh3P)2CuI3 (MePh3P=methyltriphenylphosphonium), were synthesized. α-(MePh3P)2CuI3 with blue emission peaking at 475 nm is firstly discovered wherein its structure contains regular [CuI3]2- triangles and crystallizes in centrosymmetric space group P21/c. While β-(MePh3P)2CuI3 featuring distorted [CuI3]2- planar triangles shows inversion symmetry breaking and crystallizes in the noncentrosymmetric space group P21, which exhibits cyan emission peaking at 495 nm with prominent near-unity photoluminescence quantum yield and the excitation band ranging from 200 to 450 nm. Intriguingly, β-(MePh3P)2CuI3 exhibits phase-matchable second-harmonic generation response of 0.54×KDP and a suitable birefringence of 0.06@1064 nm. Furthermore, β-(MePh3P)2CuI3 also can be excited by X-ray radioluminescence with a high scintillation light yield of 16193 photon/MeV and an ultra-low detection limit of 47.97 nGy/s, which is only 0.87 % of the standard medical diagnosis (5.5 μGy/s). This work not only promotes the development of solid-state lighting, laser frequency conversion and X-ray imaging, but also provides a reference for constructing multifunctional hybrid metal halides.

Controlled Synthesis of Terbium-Doped Colloidal Gd2O2S Nanoplatelets Enables High-Performance X-ray Scintillators.

Terbium-doped gadolinium oxysulfide (Gd2O2S:Tb3+), commonly referred to as Gadox, is a widely used scintillator material due to its exceptional X-ray attenuation efficiency and high light yield. However, Gadox-based scintillators suffer from low X-ray spatial resolution due to their large particle size, which causes significant light scattering. To address this limitation, we report the synthesis of terbium-doped colloidal Gadox nanoplatelets (NPLs) with near-unity photoluminescence quantum yield (PLQY) and high radioluminescence light yield (LY). In particular, our investigation reveals a strong correlation between PLQY, LY, particle size, and Tb3+concentration. Our synthetic approach allows precise control over the lateral size and thickness of the Gadox NPLs, resulting in a LY of 50,000 photons/MeV. Flexible scintillating screens fabricated with the solution-processable Gadox NPLs exhibited a 20 lp/mm X-ray spatial resolution, surpassing commercial Gadox scintillators. These high-performance and flexible Gadox NPL-based scintillators enable enhanced X-ray imaging capabilities in medicine and security. Our work provides a framework for designing nanomaterial scintillators with superior spatial resolution and efficiency through precise control of dimensions and dopant concentration.

Ultrafast Visual Detection of a Trace Amount of Water by Highly Efficient Hybrid Manganese Halides.

A quantitative water detection method is urgently needed in storage facilities, space exploration, and the chemical industry. Although numerous physical techniques have been widely utilized to determine the water content, they still suffer from many disadvantages such as highly expensive special instruments, complicated analysis processes, etc. Hence, a convenient, rapid, and sensitive water analysis method is highly desirable. Herein, we developed a visual fluorescence sensing technology for water detection based on reversible PL off-on switching of organic-inorganic hybrid zero-dimensional (0D) manganese halides. In this work, a family of hybrid manganese halides were synthesized through a facile solution method, namely, [NH4(18-Crown-6)]2MnBr4, [Ca(18-Crown-6)·3H2O](18-Crown-6)MnBr4, [NH4(dibenzo-18-Crown-6)]2MnBr4, and [Ca(dibenzo-18-Crown-6)·2H2O]MnBr4. Excited by UV light, these highly crystalline manganese halides exhibit strong green light emissions from the d-d electron transition of Mn2+ with near-unity photoluminescence quantum yield and submillisecond lifetime. Benefiting from the dynamic and weak ionic bonding interactions, these 0D manganese halides display reversible water-response on/off luminescence switching but fail in any other aprotic solvents. Therefore, these 0D hybrid manganese halides can be explored as ultrafast visual fluorescence probes to detect the trace amount of water in organic solvents with multiple superiorities of rapid response time (< 2 s), ultralow detection limit (9.71 ppm), excellent repeatability, etc. The reversible water-response luminescent on/off switching also provides a binary optical gate with advanced applications in anticounterfeiting and information security, etc.

Near-Unity Photoluminescence Quantum Yield of Core-Only InP Quantum Dots via a Simple Postsynthetic InF3 Treatment.

Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors.

Circularly Polarized Luminescence Induced by Hydrogen-Bonding Networks in a One-Dimensional Hybrid Manganese(II) Chloride.

Chiral hybrid metal halides hold great potential as circularly polarized luminescence light sources. Herein, we have obtained two enantiomeric pairs of one-dimensional hybrid chiral manganese(II) chloride single crystals, R/S-(3-methyl piperidine)MnCl3 (R/S-1) and R/S-(3-hydroxy piperidine)MnCl3 (R/S-2), crystallizing in the non-centrosymmetric space group P212121. In comparison to R/S-1, R/S-2 single crystals not only show red emission with near-unity photoluminescence quantum yield (PLQY) and high resistance to thermal quenching but also exhibit circularly polarized luminescence with an asymmetry factor (glum) of 2.5×10-3, which can be attributed to the enhanced crystal rigidity resulting from the hydrogen bonding networks between R/S-(3-hydroxy piperidine) cations and [MnCl6]4- chains. The circularly polarized luminescence activities originate from the asymmetric [MnCl6]4- luminophores induced by N-H⋅⋅⋅Cl hydrogen bonding with R/S-(3-hydroxy piperidine). Moreover, these samples demonstrate great application potential in circularly polarized light-emitting diodes and X-ray scintillators. This work shows a highly efficient photoluminescent Mn-based halide and offers a strategy for designing multifunctional chiral metal halides.

A Three-Dimensional Open-Framework Tin(II) Sulfate with Near-Unity Photoluminescence Quantum Yield.

A new open-framework tin(II) sulfate, formulated as C4H12N2·Sn(SO4)2·H2O, was prepared under the structure-directing effect of piperazine. This compound features a 3D structure with 16-ring channels. Under ultraviolet light irradiation, it emits bright yellow luminescence with a near-unity photoluminescence quantum yield. Theoretical calculations were carried out to understand the luminescence mechanism.

Near-unity quantum yield and long-term emission stability in halide perovskite nanocrystal glass composite

Metal halide perovskites are promising optoelectronic materials due to their outstanding luminescent properties. However, the instability of perovskites has long been the bottleneck to their practical applications. Here Cs4PbBr6 nanocrystals based glass composite (Cs4PbBr6 NCs@glass) are successfully prepared, which displays green emission color (520 nm), narrow bandwidth (23 nm) and a near-unity photoluminescence quantum yield (PLQY). The H2O molecules permeating in the lattice of Cs4PbBr6 were found to be a crucial role in the subband energy emission. The Cs4PbBr6 NCs@glass has excellent emission stability; maintains 93 % of initial PL intensity after ultraviolet light irradiation for over 5000 h. In addition, by adjusting the halogen content, we have achieved tunable emission color from blue (450 nm) to green (520 nm) and red (670 nm) on Cs4PbX6 NCs@glass (X = Cl, Br, I), which covers up to 127 % of the National Television Systems Board (NTSC) standard system. Our finding indicates the commercial applications of perovskite materials in lighting and display.

Efficiently green-emitting and ultra-stable CsPbBr3@SiO2 nanocomposites for white light-emitting diodes

Inorganic oxide especially SiO2 encapsulation strategy is an effective way to improve the stability of all-inorganic cesium lead halide perovskite (CsPbX3, X = Cl, Br, I) nanocrystals (NCs). However, when CsPbX3 NCs are encapsulated in SiO2 by in situ tetraethyl orthosilicate (TEOS) hydrolysis, the unavoidable by-products (water and ethanol) of TEOS hydrolysis commonly damage the structural and optical properties of the CsPbX3 NCs. Herein, TDPA-CsPbBr3 NCs with the dense tetradecylphosphonic acid (TDPA) passivation were pre-prepared and subsequently encapsulated into SiO2 via in situ TEOS hydrolysis. Benefitting from the dense phosphonic passivation layer capable of resisting the erosion of polar by-products generated by TEOS hydrolysis, the obtained TDPA-CsPbBr3@SiO2 nanocomposites maintain the excellent optical properties of the colloidal CsPbBr3 NCs, showing near-unity photoluminescence quantum yield (PLQY) and ultra-narrow full width at half maximum (FWHM). Furthermore, the TDPA-CsPbBr3@SiO2 nanocomposites exhibit outstanding stability against ethanol, UV light, and heating treatment due to the dual protection of dense phosphonate ligand layers and inorganic SiO2 matrix. The white light-emitting diodes (WLED) device was fabricated by sequentially depositing green-emitting TDPA-CsPbBr3@SiO2 nanocomposites and red-emitting K2SiF6:Mn on blue-emitting GaN LED chip. The obtained WLED exhibits excellent luminous performances with standard white emission of CIE Coordinates (0.33, 0.33), a color gamut 138 % of the NTSC and 103 % of Rec. 2020, respectively. This study demonstrates that TDPA-CsPbBr3@SiO2 nanocomposites have a potential application in solid-state lighting and backlight displays.