Near-infrared Laser Light Research Articles

Advancing on-chip Kerr optical parametric oscillation towards coherent applications covering the green gap

Optical parametric oscillation (OPO) in Kerr microresonators can efficiently transfer near-infrared laser light into the visible spectrum. To date, however, chromatic dispersion has mostly limited output wavelengths to >560 nm, and robust access to the whole green light spectrum has not been demonstrated. In fact, wavelengths between 532 nm and 633 nm, commonly referred to as the “green gap”, are especially challenging to produce with conventional laser gain. Hence, there is motivation to extend the Kerr OPO wavelength range and develop reliable device designs. Here, we experimentally show how to robustly access the entire green gap with Kerr OPO in silicon nitride microrings pumped near 780 nm. Our microring geometries are optimized for green-gap emission; in particular, we introduce a dispersion engineering technique, based on partially undercutting the microring, which not only expands wavelength access but also proves robust to variations in resonator dimensions. Using just four devices, we generate >150 wavelengths evenly distributed throughout the green gap, as predicted by our dispersion simulations. Moreover, we establish the usefulness of Kerr OPO to coherent applications by demonstrating continuous frequency tuning (>50 GHz) and narrow optical linewidths (<1 MHz). Our work represents an important step in the quest to bring nonlinear nanophotonics and its advantages to the visible spectrum.

Phase change polymer-based structural color photonic films for contactless and inkless writing irreversibly

Thermal-responsive photonic crystals (PCs) have attracted considerable interest due to their triggerable and adjustable optical capabilities, which are promising for various applications. However, developing a mechanism for rapid and irreversible structural color transformation in PCs that enables contactless and inkless writing has significant research value. Herein, phase change polymers are incorporated into functional optical platforms capable of rapid and irreversible structural color transformation in response to thermal stimuli. In crystalline state, phase change polymers used as inverse opal scaffolds in photonic films produce structural color with high saturation. The collapse of the highly ordered inverse opal structure, driven by thermal-mediated transformation during the crystalline/amorphous conversion of phase change polymers, is identified as the primary mechanism for achieving rapid and irreversible structural color transformation. These significant color variations between the inverse opal and collapsed structures provide high color contrast and resolution. The photonic films exhibit excellent hydrophobicity, solvent resistance, and storage stability. Additionally, incorporating the photothermal material carbon black (CB) enhances color saturation and imparts efficient photothermal conversion ability to films. By modulating the photothermal effect via near-infrared (NIR) laser light, phase change polymer-based structural color photonic films can achieve a permanent configuration at 42 °C, resulting in high-resolution images. These outstanding features offer a feasible method for next-generation innovative inkless writing and printing.

Immunomodulatory R848-Loaded Anti-PD-L1-Conjugated Reduced Graphene Oxide Quantum Dots for Photothermal Immunotherapy of Glioblastoma.

Glioblastoma multiforme (GBM) is the most severe form of brain cancer and presents unique challenges to developing novel treatments due to its immunosuppressive milieu where receptors like programmed death ligand 1 (PD-L1) are frequently elevated to prevent an effective anti-tumor immune response. To potentially shift the GBM environment from being immunosuppressive to immune-enhancing, we engineered a novel nanovehicle from reduced graphene oxide quantum dot (rGOQD), which are loaded with the immunomodulatory drug resiquimod (R848) and conjugated with an anti-PD-L1 antibody (aPD-L1). The immunomodulatory rGOQD/R8/aPDL1 nanoparticles can actively target the PD-L1 on the surface of ALTS1C1 murine glioblastoma cells and release R848 to enhance the T-cell-driven anti-tumor response. From in vitro experiments, the PD-L1-mediated intracellular uptake and the rGOQD-induced photothermal response after irradiation with near-infrared laser light led to the death of cancer cells and the release of damage-associated molecular patterns (DAMPs). The combinational effect of R848 and released DAMPs synergistically produces antigens to activate dendritic cells, which can prime T lymphocytes to infiltrate the tumor in vivo. As a result, T cells effectively target and attack the PD-L1-suppressed glioma cells and foster a robust photothermal therapy elicited anti-tumor immune response from a syngeneic mouse model of GBM with subcutaneously implanted ALTS1C1 cells.

An NIR-propelled janus nanomotor with enhanced ROS-scavenging, immunomodulating and biofilm-eradicating capacity for periodontitis treatment

Periodontitis is an inflammatory disease caused by bacterial biofilms, which leads to the destruction of periodontal tissue. Current treatments, such as mechanical cleaning and antibiotics, struggle to effectively address the persistent biofilms, inflammation, and tissue damage. A new approach involves developing a Janus nanomotor (J-CeM@Au) by coating cerium dioxide-doped mesoporous silica (CeM) with gold nanoparticles (AuNPs). This nanomotor exhibits thermophoretic motion when exposed to near-infrared (NIR) laser light due to the temperature gradient produced by the photothermal effects of asymmetrically distributed AuNPs. The NIR laser provides the energy for propulsion and activates the nanomotor's antibacterial properties, allowing it to penetrate biofilms and kill bacteria. Additionally, the nanomotor's ability to scavenge reactive oxygen species (ROS) can modulate the immune response and create a regenerative environment, promoting the healing of periodontal tissue. Overall, this multifunctional nanomotor offers a promising new approach for treating periodontitis by simultaneously addressing biofilm management and immune modulation with autonomous movement.

Photothermal Depth Profiling of Gelatin-Stabilised Gold Nanorods-Trastuzumab Conjugate as a Potential Breast Cancer Photothermal Agent

AbstractGold nanorods (AuNRs) are powerful photothermal agents (PTAs) in cancer treatment due to their near-infrared laser light absorption ability. However, the cytotoxicity of AuNRs caused by the presence of cationic surfactants often used and their lack of specificity affect their application in photothermal therapy. Thus, we herein developed a bioconjugate obtained from the functionalisation of AuNRs to gelatin (Gel@AuNRs), followed by the conjugation of the as-synthesised material to a breast cancer antibody, trastuzumab (Trast-Gel@AuNRs) to address these issues. The optical and structural characterization of the as-synthesized indicated no significant changes in the optical properties of AuNRs after their functionalisation with gelatin and conjugation with the antibody. The photothermal profiling of the as-synthesised materials showed that AuNRs still have an excellent photothermal conversion efficiency (PCE) after their functionalisation (20%) and their conjugation to an antibody (19%). In addition, the In vitro photothermal depth response showed that Trast-Gel@AuNRs is a promising photothermal agent for HER2-positive breast cancer treatment. Graphical Abstract

Thermal stabilization of biologics inside glass vials using light-assisted drying (LAD)

Light-assisted drying (LAD) uses near-infrared (1064 nm) laser light to selectively heat water, quickly dehydrating samples and forming an amorphous trehalose preservation matrix for biologics that can be stored at ambient temperatures. In this study, LAD is used to create preservation matrices inside glass vials used in industry. Sample volumes of 0.25 and 0.50 mL containing the model protein lysozyme were LAD processed. After LAD processing, samples were stored for one month at 4 °C or 20 °C. Thermal histories and transmitted laser power were monitored throughout processing to determine optimal drying times. The trehalose matrix was characterized using polarized light imaging to detect crystallization during storage. Karl Fischer titration was used to measure the water content of samples and differential scanning calorimetry was used to assess protein structure. LAD-processed samples had low water content (2%), were stable against crystallization and the protein structure was unaltered.

Femtosecond pulsed laser photodynamic therapy activates melanin and eradicates malignant melanoma

Photodynamic therapy (PDT) relies on a series of photophysical and photochemical reactions leading to cell death. While effective for various cancers, PDT has been less successful in treating pigmented melanoma due to high light absorption by melanin. Here, this limitation is addressed by 2-photon excitation of the photosensitizer (2p-PDT) using ~100 fs pulses of near-infrared laser light. A critical role of melanin in enabling rather than hindering 2p-PDT is elucidated using pigmented and non-pigmented murine melanoma clonal cell lines in vitro. The photocytotoxicities were compared between a clinical photosensitizer (Visudyne) and a porphyrin dimer (Oxdime) with ~600-fold higher σ2p value. Unexpectedly, while the 1p-PDT responses are similar in both cell lines, 2p activation is much more effective in killing pigmented than non-pigmented cells, suggesting a dominant role of melanin 2p-PDT. The potential for clinical translational is demonstrated in a conjunctival melanoma model in vivo, where complete eradication of small tumors was achieved. This work elucidates the melanin contribution in multi-photon PDT enabling significant advancement of light-based treatments that have previously been considered unsuitable in pigmented tumors.

Enhancing Photothermal/Photodynamic Therapy for Glioblastoma by Tumor Hypoxia Alleviation and Heat Shock Protein Inhibition Using IR820-Conjugated Reduced Graphene Oxide Quantum Dots.

We use low-molecular-weight branched polyethylenimine (PEI) to produce cytocompatible reduced graphene oxide quantum dots (rGOQD) as a photothermal agent and covalently bind it with the photosensitizer IR-820. The rGOQD/IR820 shows high photothermal conversion efficiency and produces reactive oxygen species (ROS) after irradiation with near-infrared (NIR) light for photothermal/photodynamic therapy (PTT/PDT). To improve suspension stability, rGOQD/IR820 was PEGylated by anchoring with the DSPE hydrophobic tails in DSPE-PEG-Mal, leaving the maleimide (Mal) end group for covalent binding with manganese dioxide/bovine serum albumin (MnO2/BSA) and targeting ligand cell-penetrating peptide (CPP) to synthesize rGOQD/IR820/MnO2/CPP. As MnO2 can react with intracellular hydrogen peroxide to produce oxygen for alleviating the hypoxia condition in the acidic tumor microenvironment, the efficacy of PDT could be enhanced by generating more cytotoxic ROS with NIR light. Furthermore, quercetin (Q) was loaded to rGOQD through π-π interaction, which can be released in the endosomes and act as an inhibitor of heat shock protein 70 (HSP70). This sensitizes tumor cells to thermal stress and increases the efficacy of mild-temperature PTT with NIR irradiation. By simultaneously incorporating the HSP70 inhibitor (Q) and the in situ hypoxia alleviating agent (MnO2), the rGOQD/IR820/MnO2/Q/CPP can overcome the limitation of PTT/PDT and enhance the efficacy of targeted phototherapy in vitro. From in vivo study with an orthotopic brain tumor model, rGOQD/IR820/MnO2/Q/CPP administered through tail vein injection can cross the blood-brain barrier and accumulate in the intracranial tumor, after which NIR laser light irradiation can shrink the tumor and prolong the survival times of animals by simultaneously enhancing the efficacy of PTT/PDT to treat glioblastoma.

Performance evaluation of atomic layer deposited TiO2/TiN nanolaminates used as infrared photodetectors

We study the interaction with photodetectors of near infrared (NIR) laser light with power P in the range of mW and period τ = 3.55 fs (wavelength λ = 1064 nm, frequency ν = 0.28 PHz). We fabricate the photodetectors by depositing different sequences of thin TiO2/TiN nano-laminates onto glass substrates using atomic layer deposition (ALD). To evaluate the photodetector's performance, we assume Pτ to be the energy transferred to them from NIR laser light, allowing us to extract the photodetector's inductance L at zero bias voltage, and to explicitly link P to the photocurrent ΔI, or photovoltage ΔV, generated by the photodetector. Such a link is observed in the literature, but not justified. We further assume Pλ = P λ/lact to be the effective power illuminating the photodetector with size lact. This assumption enables us to determine the photodetector's current responsivity (πI), noise equivalent power (NEP), and detectivity (D). To establish whether Pτ and Pλ correctly account for the energy and the power involved in the photodetector's interaction with light, we compare L, πI, NEP, and D of our photodetectors to the corresponding parameters of state-of-the-art (SOA) devices reported in the literature. The comparison indicates that the L, πI, NEP, and D of our photodetectors are in the range of SOA devices, thus validating our assumptions on Pτ and Pλ. Finally, our findings provide suggestions on how to improve thin ALD TiO2/TiN nano-laminates as suitable active materials in photodetectors.

Three-Four Photon Transition Mn(II) Complex Monitoring Lysosome-Related ATP in Real Time via Fluorescence Lifetime Imaging.

Currently, in situ monitoring of the adenosine triphosphate (ATP) level in lysosomes is critical to understand their involvement in various biological processes, but it remains difficult due to the interferences of limited targeting and low resolution of fluorescent probes. Herein, we report a classic Mn(II) probe (FX2-MnCl2) with near-infrared (NIR) nonlinear (NLO) properties, accompanied by three-four photon transition and fivefold fluorescence enhancement in the presence of ATP. FX2-MnCl2 combines with ATP through dual recognition sites of diethoxy and manganese ions to reflect slightly fluorescence lifetime change. Through the synergy of multiphoton fluorescence imaging (MP-FI) and multiphoton fluorescence lifetime imaging microscopy (MP-FLIM), it is further demonstrated that FX2-MnCl2 displays lysosome-specific targeting behavior, which can monitor lysosome-related ATP migration under NIR laser light. This work provides a novel multiphoton transformation fluorescence complex, which might be a potential candidate as a simple and straightforward biomarker of lysosome ATP in vitro for clinical diagnosis.

Controlled Nitric Oxide-Releasing Nanovehicles for Enhanced Infected Wound Healing: A Study on PDA@BNN6 Encapsulated in GelMA Hydrogel.

The photo-activated thermo/gas antimicrobial nanocomposite hydrogel, Gel/PDA@BNN6, is composed of the nitric oxide (NO) carrier N, N'-di-sec-butyl-N, N'-dinitroso-p-phenylenediamine (BNN6), photothermal (PTT) material polydopamine nanoparticles (PDA NPs), and methacrylate gelatin (GelMA). This hydrogel can release NO gas in a stable and controlled manner, generating a localized photothermal effect when exposed to near-infrared laser light. This dual action promotes the healing of full-thickness skin wounds that are infected. Gel/PDA@BNN6 was developed, and both in vitro and in vivo experiments were carried out to evaluate its structure, physicochemical properties, antibacterial effects, effectiveness in promoting infected wound healing, and biocompatibility. Gel/PDA@BNN6 was successfully synthesized, exhibiting a porous three-dimensional lattice structure and excellent mechanical properties. It demonstrated highly efficient photothermal conversion, controllable nitric oxide delivery, strong bactericidal effects, and minimal cytotoxicity in vitro. In vivo, Gel/PDA@BNN6, when used with NIR therapy, showed significant anti-inflammatory effects, promoted collagen deposition, and stimulated vascular neoangiogenesis, which accelerated wound closure. Additionally, it displayed superior biocompatibility. Gel/PDA@BNN6has shown an explicit curative effect for infected wound healing, suggesting it has a good chance of being an antimicrobial dressing in the future.

High-dimensional multi-pass flow cytometry via spectrally encoded cellular barcoding.

Advances in immunology, immuno-oncology, drug discovery and vaccine development demand improvements in the capabilities of flow cytometry to allow it to measure more protein markers per cell at multiple timepoints. However, the size of panels of fluorophore markers is limited by overlaps in fluorescence-emission spectra, and flow cytometers typically perform cell measurements at one timepoint. Here we describe multi-pass high-dimensional flow cytometry, a method leveraging cellular barcoding via microparticles emitting near-infrared laser light to track and repeatedly measure each cell using more markers and fewer colours. By using live human peripheral blood mononuclear cells, we show that the method enables the time-resolved characterization of the same cells before and after stimulation, their analysis via a 10-marker panel with minimal compensation for spectral spillover and their deep immunophenotyping via a 32-marker panel, where the same cells are analysed in 3 back-to-back cycles with 10-13 markers per cycle, reducing overall spillover and simplifying marker-panel design. Cellular barcoding in flow cytometry extends the utility of the technique for high-dimensional multi-pass single-cell analyses.

Photodynamic Suppression of Enterococcus Faecalis in Infected Root Canals with Indocyanine Green, TroloxTM and Near-Infrared Light.

Recently, our group showed that additional supplementation of Trolox™ (vitamin E analogue) can significantly enhance the antimicrobial photodynamic effect of the photosensitizer Indocyanine green (ICG). Up to now, the combined effect has not yet been investigated on Enterococcus faecalis in dental root canals. In the present in vitro study, eighty human root canals were inoculated with E. faecalis and subsequently subjected to antimicrobial Photodynamic Therapy (aPDT) using ICG (250, 500, 1000 µg/mL) and near-infrared laser light (NIR, 808 nm, 100 Jcm-2). Trolox™ at concentrations of 6 mM was additionally applied. As a positive control, irrigation with 3% NaOCl was used. After aPDT, root canals were manually enlarged and the collected dentin debris was subjected to microbial culture analysis. Bacterial invasion into the dentinal tubules was verified for a distance of 300 µm. aPDT caused significant suppression of E. faecalis up to a maximum of 2.9 log counts (ICG 250 µg/mL). Additional application of TroloxTM resulted in increased antibacterial activity for aPDT with ICG 500 µg/mL. The efficiency of aPDT was comparable to NaOCl-irrigation inside the dentinal tubules. In conclusion, ICG significantly suppressed E. faecalis. Additional application of TroloxTM showed only minor enhancement. Future studies should also address the effects of TroloxTM on other photodynamic systems.

Light-driven nucleation, growth, and patterning of biorelevant crystals using resonant near-infrared laser heating

Spatiotemporal control over crystal nucleation and growth is of fundamental interest for understanding how organisms assemble high-performance biominerals, and holds relevance for manufacturing of functional materials. Many methods have been developed towards static or global control, however gaining simultaneously dynamic and local control over crystallization remains challenging. Here, we show spatiotemporal control over crystallization of retrograde (inverse) soluble compounds induced by locally heating water using near-infrared (NIR) laser light. We modulate the NIR light intensity to start, steer, and stop crystallization of calcium carbonate and laser-write with micrometer precision. Tailoring the crystallization conditions overcomes the inherently stochastic crystallization behavior and enables positioning single crystals of vaterite, calcite, and aragonite. We demonstrate straightforward extension of these principles toward other biorelevant compounds by patterning barium-, strontium-, and calcium carbonate, as well as strontium sulfate and calcium phosphate. Since many important compounds exhibit retrograde solubility behavior, NIR-induced heating may enable light-controlled crystallization with precise spatiotemporal control.

Thermal neuromodulation using pulsed and continuous infrared illumination in a penicillin-induced acute epilepsy model

Infrared neuromodulation (INM) is a promising neuromodulation tool that utilizes pulsed or continuous-wave near-infrared (NIR) laser light to produce an elevation of the background temperature of the neural tissue. The INM-based cortical heating has been proven as an effective modality to induce changes in neuronal activities. In this paper, we investigate the effect of INM-based cortical heating on the characteristics of interictal epileptiform discharges (IEDs) induced by penicillin in anesthetized rats. Cortical heating was conducted using a NIR laser light guided through a needle-like silicon-based waveguide probe. We detected penicillin-induced cortical IEDs from preprocessed micro-electrocorticography (muECoG) recordings, then we assessed changes in various temporal and spectral features of IEDs due to INM. Our findings show that the fast cortical heating phase obtained with continuous-wave NIR light is highly associated with a reduction of IED amplitudes, small but significant changes in the negative amplitude of IEDs compared with the baseline, and a proportional increase in the power of frequency bands related to delta/theta (2–8 Hz) and gamma (28–80 Hz) oscillations. Furthermore, a low rate of cortical heating with pulsed NIR illumination has a more inhibitory impact on the sharp negative polarity of IEDs. Our findings do not indicate a clear reduction in the frequency of IEDs in anesthetized rodents. In contrast, 2–4 min of continuous laser illumination leads to a notable increase in IED frequency. This effect of INM could potentially restrict its use in therapeutic applications related to epilepsy. However, the thermal effect of INM on cortical neurons induces changes in other characteristics of IEDs, which could prove beneficial for future applications.

Improving cancer chemotherapy through photothermally triggered drug release from poly(N-isopropylacrylamide-co-acrylic acid)/Prussian blue hydrogel

Recently, microgel-based drug delivery systems have received great attention. However, these systems face various challenges such as low drug loading, leakage, rapid drug elimination by the bloodstream, and low efficacy against tumors. To overcome these limitations, we fabricated a near-infrared (NIR)-responsive poly(N-isopropylacrylamide-co-acrylic acid)/Prussian blue microgel (PNA@PB). The microgel featured improved stability and higher loading of Prussian blue (PB), achieved by chemically linking it to the polymer. For cancer therapy, the microgel was loaded with the model drug doxorubicin (DOX) to obtain PNA@PB@DOX, resulting in a high loading capacity of 26% and encapsulation efficiency of 51%. Upon exposure to 808 nm NIR laser light, the photothermal PB in PNA@PB@DOX raised the temperature above the lower critical solution temperature of the microgel, causing the microgel to shrink and release the drug by 36%. The NIR-triggered drug release by PNA@PB@DOX resulted in improved photothermal/chemotherapy performance, both in vitro and in vivo experiments using A549 lung cancer cells, compared with PNA@PB. The combination of photothermal therapy from PB and photothermal shrinkage-induced chemotherapy from PNA was found to be highly effective in killing cancer cells.

Surface grafted gold nanorods (GNRDs) using thermosensitive copolymers with various transition temperatures: Nanomaterials with potential application for photothermal therapy

A series of diblock copolymers containing a biocompatible polyethylene glycol (PEG) block and a thermoresponsive poly(N-vinyl caprolactam) (PNVCL) based block, were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The cloud point temperature (Tcp) in water of the diblocks was adjusted from 35 to 42 °C by adding N-vinyl pyrrolidone (NVP) units in the thermoresponsive block. The terminal trithiocarbonate group evolving from the RAFT agent used in the synthesis, was modified to thiol to stabilize gold nanorods (GNRDs) via a “grafting-to” approach. Stability of the PEG-b-P(NVCL-co-NVP)@GNRDs nanomaterials was monitored during 8 days; where the localized surface plasmon resonance (LSPR) absorption band did not shifted or showed any broadening. Aqueous dispersed samples were irradiated with near-infrared laser light for 10 min, observing a temperature increase from 25 to 50 °C depending on the laser optical power (between 100 and 500 mW); while no precipitation was observed. For temperatures above the cloud point temperature of the copolymers (Tcp), the formation of aggregates in sizes around 200 nm was observed without precipitation. This study demonstrates that the stabilization of gold nanorods by grafting with the title thermoresponsive block copolymers, and the observed temperature-dependent block-copolymer@GNRD aggregation, has potential uses in drug-delivery applications for photothermal therapy.

The mitochondrial-related effect of the 905 nm photobiomodulation therapy on 50B11 sensory neurons.

Photobiomodulation therapy (PBMT) is known as a complementary tool to alleviate pain sensation in patients, nevertheless, there is still a gap of knowledge on its mechanism of action, thus limiting its clinical employment. In this study, a possible molecular mechanism of the 905 nm PBMT (0.25 W/cm2 ; 3, 6, 12, and 18 J/cm2 , 5 Hz) analgesic effect was tested on 50B11 cells, by investigating its impact on mitochondria. A decrement of adenosine triphosphate was detected, moreover, an increment of total reactive oxygen species and mitochondrial superoxide anion was found after PBMT with all protocols tested. PBMT at 18 J diminished the mitochondrial membrane potential, and influenced mitochondrial respiration, decreasing the oxygen consumption rate. Finally, a decrement of extracellular signal-regulated kinase 1/2 phosphorylation was observed with the protocol using 12 J. Taken together these findings highlighted the intracellular effects, mainly correlated to mitochondrial, induced by 905 nm PBMT in sensory neurons, indicating the central role of this organelle in the cellular response to 905 nm near-infrared laser light.

Preoperative visualization of midline-crossing subcutaneous arteries in transverse abdominal flaps using photoacoustic tomography

Photoacoustic tomography is a noninvasive vascular imaging modality that uses near-infrared pulsed laser light and ultrasound to visualize vessels. We previously demonstrated the utility of photoacoustic tomography for anterolateral thigh flap surgery involving body-attachable vascular mapping sheets. However, it was not possible to obtain clear separate images of arteries and veins. In this study, we tried to visualize subcutaneous arteries that cross the midline of the abdomen, since these arteries are known to be important for obtaining large perfusion areas in transverse abdominal flaps. Four patients scheduled to undergo breast reconstruction with abdominal flaps were examined. Photoacoustic tomography was performed preoperatively. The tentative arteries and veins were traced according to the S-factor, an approximate hemoglobin oxygen saturation parameter calculated using 2 laser excitation wavelengths (756 and 797nm). Intraoperatively, arterial-phase indocyanine green (ICG) angiography was performed after abdominal flap elevation. Images of vessels speculated to be arteries by preoperative photoacoustic tomography were merged with those of intraoperative ICG angiography and analyzed in an 8×4-cm2 area below the umbilical region. The S-factor was used to visualize the midline-crossing subcutaneous arteries in all 4 patients. A matching analysis compared preoperative tentative arteries according to photoacoustic tomography with ICG angiography results in the 8×4-cm2 area below the umbilical region and indicated a 71.3-82.1% match (average: 76.9% match). This study demonstrates that the S-factor, a noninvasive, label-free imaging modality, can be used to successfully visualize subcutaneous arteries. This information can aid in selecting perforators for abdominal flap surgery.

Laser sintering of polyether sulfone/carbon black composite powders using near-infrared laser

Low-cost miniaturized laser sintering equipment remains lacking at present; therefore, the development of laser sintering technology and its widespread applications are significantly hindered. Traditional laser sintering equipment is composed of a carbon dioxide laser, water cooling system, powder-box-heating device, and thermal insulation device. Such requirements are the main factors limiting the miniaturization and economic efficiency of laser sintering equipment. Herein, a laser-sintered material was fabricated by sintering using a near-infrared laser light source with a wavelength of 1064 nm without heating, and its microstructure and properties were systematically studied. Polyether sulfone (PES) and carbon black (CB) powders were selected as the raw materials for preparing PES/CB composites by mechanical mixing. For synthesizing the PES/CB composite powders, the CB powder content was varied within the range of 0.25%–1.5%. The PES/CB powders with different component ratios were subjected to laser sintering treatment, and the corresponding microstructural evolutions of the sintered parts were analyzed. The effects of different component ratios on the mechanical properties and dimensional accuracy of the sintered part were investigated, and the optimal content of CB powders of the PES/CB composite material was determined. Additionally, the effects of laser power (10–18 W), scanning speed (1200–1600 mm/s), and scanning spacing (0.04–0.08 mm) on the forming quality of the sintered parts of the PES/CB composite powders were evaluated. The processing parameters of the laser sintering of PES/CB composite powders were explored using orthogonal experimental tests and optimized using the comprehensive weighted method.