Native bR Research Articles

Merocyanines form bacteriorhodopsins with strongly bathochromic absorption maxima

There is a need to shift the absorbance of biomolecules to the optical transparency window of tissue for applications in optogenetics and photo-pharmacology. There are a few strategies to achieve the so-called red shift of the absorption maxima. Herein, a series of 11 merocyanine dyes were synthesized and employed as chromophores in place of retinal in bacteriorhodopsin (bR) to achieve a bathochromic shift of the absorption maxima relative to bR’s λmaxa\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\lambda }_{\\mathrm{max}}^{a}$$\\end{document} of 568 nm. Assembly with the apoprotein bacterioopsin (bO) led to stable, covalently bound chromoproteins with strongly bathochromic absorbance bands, except for three compounds. Maximal red shifts were observed for molecules 9, 2, and 8 in bR where the λmaxa\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\lambda }_{\\mathrm{max}}^{a}$$\\end{document} was 766, 755, and 736 nm, respectively. While these three merocyanines have different end groups, they share a similar structural feature, namely, a methyl group which is located at the retinal equivalent position 13 of the polyene chain. The absorption and fluorescence data are also presented for the retinal derivatives in their aldehyde, Schiff base (SB), and protonated SB (PSB) forms in solution. According to their hemicyanine character, the PSBs and their analogue bRs exhibited fluorescence quantum yields (Φf) several orders of magnitude greater than native bR (Φf 0.02 to 0.18 versus 1.5 × 10–5 in bR) while also exhibiting much smaller Stokes shifts than bR (400 to 1000 cm−1 versus 4030 cm−1 in bR). The experimental results are complemented by quantum chemical calculations where excellent agreement between the experimental λmaxa\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\lambda }_{\\mathrm{max}}^{a}$$\\end{document} and the calculated λmaxa\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\lambda }_{\\mathrm{max}}^{a}$$\\end{document} was achieved with the second-order algebraic-diagrammatic construction [ADC(2)] method. In addition, quantum mechanics/molecular mechanics (QM/MM) calculations were employed to shed light on the origin of the bathochromic shift of merocyanine 2 in bR compared with native bR.Graphical abstract

Effects of germination and roasting on physicochemical and sensory characteristics of brown rice for tea infusion

Germinated brown rice was roasted for the preparation of tea. The germination induced substantial increases in reducing sugars (from 3224.06 to 5028.80 mg/100 g), free amino acids (from 62.51 to 165.07 mg/100 g), volatile compounds, and phenolics (10.06 to 14.27 mg GAE/100 g). Roasting decreased the residual contents of free amino acids and reducing sugars, but produced the volatiles and phenolics. Browning index was slightly decreased by the germination (from 22.69 to 20.13), but significantly increased by the subsequent roasting. The germinated BR (GBR) was more susceptible to roasting than native BR. Acrylamide content in the roasted GBR was significantly lower than that in the roasted BR, because of the lower asparagine content in GBR. Sensory evaluation revealed that a mild roasting for 5 min at 230 °C after germination for 2 days was appropriate to produce a brown rice tea.

Investigation of spectral and kinetic properties of polymer films based on some analogs of bacteriorhodopsin.

We investigated the characteristics of modified forms of bacteriorhodopsin in which the native retinal chromophore is replaced by a chemical analog ("bacteriorhodopsin analogs"), embedded in a polymer film. We found they displayed differential absorption spectra and kinetic curves for the most long-lived intermediates of the BR photocycle. We also studied the influence of chemical reagents on the functioning of bacteriorhodopsin analogs in polymeric films. We found that the immobilization of BR analogs in polymer leads, as in the case of native BR, to a slowing down of their photocycles. Kinetic analysis showed that M-like state intermediates of all the BR analogs have a longer dark relaxation time than native BR. The retention and retardation of the photocycle in these films suggest that films based on BR analogs can be used as photochromic materials. Moreover, 4-keto BR seems to be more promising for this application as compared not only with native BR, but also with other analogs of BR studied in this work.

Energy Transfer Induced by Dye Encapsulation in a Hybrid Nanoparticle‐Purple Membrane Reversible Assembly

AbstractThe purple membrane (PM) isolated from the bacteria Halobacterium salinarum (H. salinarum) arranges the transmembrane proton pump bacteriorhodopsin (bR) in a 2D hexagonal crystalline lattice. Here, PM sheets containing native bR bend into tube‐like structures with open edges under acidic pH conditions. When decorated with gold nanoparticles (AuNPs), these same PM sheets yield a sealed tube assembly. Upon Rhodamine B (Rh B) sequestration inside the sealed tube, a dramatic decrease in Rh B fluorescence lifetime (τf) from 1.5 ns (unencapsulated) to 14 ps (encapsulated) is observed. The dramatic decrease in lifetime is attributed to energy transfer between AuNPs and Rh B. Subsequent release from the AuNP–PM capsules triggered by an increase in pH shows that 93% of Rh B is recovered (τ = 14 min) due to the capsules' unfolding. The hybrid AuNP–PM material highlights the utility of multicomponent ensembles (i.e., lipid bilayer, protein array, and NPs) by demonstrating that complex, multistimuli 3D responses can lead to multiplexed functions such as controlling energy transfer in the confined, encapsulated state and breaking the energy pair via molecular release in response to a change in pH.

Nanoscale electron transport and photodynamics enhancement in lipid-depleted bacteriorhodopsin monomers.

Potential future use of bacteriorhodopsin (bR) as a solid-state electron transport (ETp) material requires the highest possible active protein concentration. To that end we prepared stable monolayers of protein-enriched bR on a conducting HOPG substrate by lipid depletion of the native bR. The ETp properties of this construct were then investigated using conducting probe atomic force microscopy at low bias, both in the ground dark state and in the M-like intermediate configuration, formed upon excitation by green light. Photoconductance modulation was observed upon green and blue light excitation, demonstrating the potential of these monolayers as optoelectronic building blocks. To correlate protein structural changes with the observed behavior, measurements were made as a function of pressure under the AFM tip, as well as humidity. The junction conductance is reversible under pressure changes up to ∼300 MPa, but above this pressure the conductance drops irreversibly. ETp efficiency is enhanced significantly at >60% relative humidity, without changing the relative photoactivity significantly. These observations are ascribed to changes in protein conformation and flexibility and suggest that improved electron transport pathways can be generated through formation of a hydrogen-bonding network.

Covalent Attachment of Bacteriorhodopsin Monolayer to Bromo‐terminated Solid Supports: Preparation, Characterization, and Protein Stability

The interfacing of functional proteins with solid supports and the study of related protein-adsorption behavior are promising and important for potential device applications. In this study, we describe the preparation of bacteriorhodopsin (bR) monolayers on Br-terminated solid supports through covalent attachment. The bonding, by chemical reaction of the exposed free amine groups of bR with the pendant Br group of the chemically modified solid surface, was confirmed both by negative AFM results obtained when acetylated bR (instead of native bR) was used as a control and by weak bands observed at around 1610 cm(-1) in the FTIR spectrum. The coverage of the resultant bR monolayer was significantly increased by changing the pH of the purple-membrane suspension from 9.2 to 6.8. Although bR, which is an exceptionally stable protein, showed a pronounced loss of its photoactivity in these bR monolayers, it retained full photoactivity after covalent binding to Br-terminated alkyls in solution. Several characterization methods, including atomic force microscopy (AFM), contact potential difference (CPD) measurements, and UV/Vis and Fourier transform infrared (FTIR) spectroscopy, verified that these bR monolayers behaved significantly different from native bR. Current-voltage (I-V) measurements (and optical absorption spectroscopy) suggest that the retinal chromophore is probably still present in the protein, whereas the UV/Vis spectrum suggests that it lacks the characteristic covalent protonated Schiff base linkage. This finding sheds light on the unique interactions of biomolecules with solid surfaces and may be significant for the design of protein-containing device structures.

Bacteriorhodopsin‐Monolayer‐Based Planar Metal–Insulator–Metal Junctions via Biomimetic Vesicle Fusion: Preparation, Characterization, and Bio‐optoelectronic Characteristics

AbstractA reliable and reproducible method for preparing bacteriorhodopsin (bR)‐containing metal–biomolecule–monolayer‐metal planar junctions via vesicle fusion tactics and soft deposition of Au top electrodes is reported. Optimum monolayer and junction preparations, including contact effects, are discussed. The electron‐transport characteristics of bR‐containing membranes are studied systematically by incorporating native bR or artificial bR pigments derived from synthetic retinal analogues, into single solid‐supported lipid bilayers. Current–voltage (I–V) measurements at ambient conditions show that a single layer of such bR‐containing artificial lipid bilayers pass current in solid electrode/bilayer/solid electrode structures. The current is passed only if retinal or its analogue is present in the protein. Furthermore, the preparations show photoconductivity as long as the retinal can isomerize following light absorption. Optical characterization suggests that the junction photocurrents might be associated with a photochemically induced M‐like intermediate of bR. I–V measurements along with theoretical estimates reveal that electron transfer through the protein is over four orders of magnitude more efficient than what would be estimated for direct tunneling through 5 nm of water‐free peptides. Our results furthermore suggest that the light‐driven proton‐pumping activity of the sandwiched solid‐state bR monolayer contributes negligibly to the steady‐state light currents that are observed, and that the orientation of bR does not significantly affect the observed I–V characteristics.

Circular dichroism and cross-linking studies of bacteriorhodopsin mutants

Circular dichroism (CD) spectroscopy was employed for native (wild type, WT) bacteriorhodopsin (bR) and several mutant derivatives: R134K, R134H, R82Q, S35C, L66C, and R134C/E194C. Comparative analysis of the CD spectra in visible range shows that only R134C/E194C exhibits biphasic CD, typical for native bR, the other mutants demonstrate CD spectra with significantly smaller or absent negative band. Since the biphasic CD is a feature of hexagonal lattice structure composed by bR trimers in the purple membrane, these mutants and WT were examined by cross-linking studies, which confirmed the same trend towards trimeric organization. Therefore, a single amino acid substitution may lead to drastically different CD spectra without disruption of bR trimeric organization. Thus, although disruption of bR trimeric crystalline lattice structure (e.g., solubilization with detergents) directly results in the disappearance of characteristic bilobe in visible CD, the lack of the bilobe in the CD alone does not predict the absence of trimers.

The Protonation-Deprotonation Kinetics of the Protonated Schiff Base in Bicelle Bacteriorhodopsin Crystals

In the recently published x-ray crystal structure of the “bicelle” bacteriorhodopsin (bbR) crystal, the protein has quite a different structure from the native and the in cubo bacteriorhodopsin (cbR) crystal. Instead of packing in parallel trimers as do the native membrane and the cbR crystals, in the bbR crystal the protein packs as antiparallel monomers. To date, no functional studies have been performed, to our knowledge, to investigate if the photocycle is observed in this novel protein packing structure. In this study, both Raman and time-resolved transient absorption spectroscopy are used to both confirm the presence of the photocycle and investigate the deprotonation-reprotonation kinetics of the Schiff base proton in the bbR crystal. The observed rates of deprotonation and reprotonation processes of its Schiff base have been compared to those observed for native bR under the same conditions. Unlike the previously observed similarity of the rates of these processes for cbR crystals and those for native bacteriorhodopsin (bR), in bbR crystals the rate of deprotonation has increased by 300%, and the rate of reprotonation has decreased by nearly 700%. These results are discussed in light of the changes observed when native bR is delipidated or monomerized by detergents. Both the change of the hydrophobicity of the environment around the protonated Schiff base and Asp 85 and Asp 96 (which could change the pK a values of proton donor-acceptor pairs) and the water structure in the bbR crystal are offered as possible explanations for the different observations.

Eu3+ binding to europium-regenerated bacteriorhodopsin upon delipidation and monomerization

We have studied the effect of monomerization of the purple membrane lattice, as well as removal of 75% of the lipids, on the binding properties of Eu3+ ions. We found that delipidation and monomerization do not cause the cations to lose their binding ability to the protein. This suggests that the three most strongly bound Eu3+ cations do not bind to the lipids, but directly bind to the protein. Furthermore, we found that delipidation actually causes a slight increase in the binding affinity. This is likely a result of reduced aggregation of europium-regenerated bacteriorhodopsin (bR) upon lipid removal causing more exposure of the binding sites to the Eu3+ cations. These results, taken with those from our previous publication [Heyes and El-Sayed, Biophys. J. 85 (2003) 426–434], might suggest that the cations remain bound upon delipidation of bR, but have no effect on the function. This is discussed with respect to the role of cations in the function of native bR.

Heterogeneity effects in the binding of all-trans retinal to bacterio-opsin.

The special trimeric structure of bacteriorhodopsin (bR) in the purple membrane of Halobacterium salinarum, and especially, the still controversial question as to whether the three protein components are structurally and functionally identical, have been subject to considerable work. In the present work, the problem is approached by studying the reconstitution reaction of the bR apo-protein with all-trans retinal, paying special attention to the effects of the apo-protein/retinal (P:R) ratio. The basic observation is that at high P:R values, the reconstitution reaction proceeds via two distinct, fast and slow, pathways associated with two different pre-pigment precursors absorbing at 430 nm (P(430)) and 400 nm (P(400)), respectively. These two reactions, exhibiting 2:1 (P(430)/P(400)) amplitude ratios, are markedly affected by the P:R value. The principal feature is the acceleration of the P(400) --> bR transition at low P:R ratios. The data are interpreted in terms of a scheme in which the added retinal first occupies two protein retinal traps, R(1) and R(2), from which it is transferred to two spectroscopically distinct binding sites corresponding to the two pre-pigments, P(430) and P(400), respectively. Two noncovalently bound retinal molecules occupy two P(430) sites of the bR trimer, while one (P(400)) occupies the third. Binding is completed by generating the retinal-protein covalent bond. Analogous experiments were also carried out with an aromatic bR chromophore and with the D85N bR mutant. The accumulated data clearly point out the heterogeneity of the binding reaction intermediates, in which two are clearly distinct from the third. However, CD spectroscopy strongly suggests that even the two P(430) sites are not structurally identical. The heterogeneity of the P intermediates in the binding reaction can be accounted for, either by being induced by cooperativity or by an intrinsic heterogeneity that is already present in the apoprotein. The question as to whether the final reconstituted pigment, as well as native bR, are nonhomogeneous should be the subject of future studies.

Proton Transfer Reactions in Native and Deionized Bacteriorhodopsin upon Delipidation and Monomerization

We have investigated the role of the native lipids on bacteriorhodopsin (bR) proton transfer and their connection with the cation-binding role. We observe that both the efficiency of M formation and the kinetics of M rise and decay depend on the lipids and lattice but, as the lipids are removed, the cation binding is a much less important factor for the proton pumping function. Upon 75% delipidation using 3-[(cholamidopropyl)dimethylammonio]-propanesulfonate (CHAPS), the M formation and decay kinetics are much slower than the native, and the efficiency of M formation is ∼30%–40% that of the native. Upon monomerization of bR by Trition X-100, the efficiency of M recovers close to that of the native (depending on pH), M formation is ∼10 times faster, and M decay kinetics are comparable to native at pH 7. The same results on the M intermediate are observed if deionized blue bR (deI bbR) is treated with these detergents (with or without pH buffers present), even though deionized blue bR containing all the lipids has no photocycle. This suggests that the cation(s) has a role in native bR that is different than in delipidated or monomerized bR, even so far as to suggest that the cation(s) becomes unimportant to the function as the lipids are removed.

Bacteriorhodopsin Analog Regenerated with 13-Desmethyl-13-Iodoretinal

The retinal analog 13-desmethyl-13-iodoretinal (13-iodoretinal) was newly synthesized and incorporated into apomembranes to reconstitute bacteriorhodopsin analog 13-I-bR. The absorption maximum was 598 nm and 97% of the chromophore was an all- trans isomer in the dark- and light-adapted state. Upon flash illumination, 13-I-bR underwent a transient spectral change in which a shorter wavelength intermediate ( λ max = 426 nm) similar to the M species of the native bR developed. Also, 13-I-bR showed light-induced proton pumping with rates and extents comparable to those seen in the native bR. The ultraviolet circular dichroism (CD) spectrum originating from the aromatic groups was different from that of the native bR, indicating that the substituted bulky iodine atom strongly interacts with neighboring amino acids. A projection difference Fourier map showed the labeled iodine was in the vicinity of helix C. 13-I-bR is an advantageous specimen for kinetic investigations of light-induced structural changes associated with the proton pumping cycle by x-ray diffraction.

The Role of the Native Lipids and Lattice Structure in Bacteriorhodopsin Protein Conformation and Stability as Studied by Temperature-dependent Fourier Transform-Infrared Spectroscopy

We report the effect of partial delipidation and monomerization on the protein conformational changes of bacteriorhodopsin (bR) as a function of temperature. Removal of up to 75% of the lipids is known to have the lattice structure of the purple membrane, albeit as a smaller unit cell, whereas treatment by Triton monomerizes bR into micelles. The effects of these modifications on the protein secondary structure is analyzed by monitoring the protein amide I and amide II bands in the Fourier transform-infrared (FT-IR) spectra. It is found that removal of the first 75% of the lipids has only a slight effect on the secondary structure at physiological temperature, whereas monomerizing bR into micelles alters the secondary structure considerably. Upon heating, the bR monomer is found to have a very low thermal stability compared with the native bR with its melting point reduced from 97 to 65 degrees C, and the pre-melting transition in which the protein changes conformation in native bR at 80 degrees C could not be observed. Also, the N[bond]H to N[bond]D exchange of the amide II band is effectively complete at room temperature, suggesting that there are no hydrophobic regions that are protected from the aqueous medium, possibly explaining the low thermal stability of the monomer. On the other hand, 75% delipidated bR has its melting temperature close to that of the native bR and does have a pre-melting transition, although the pre-melting transition occurs at significantly higher temperature than that of the native bR (91 degrees C compared with 80 degrees C) and is still reversible. Furthermore, we have also observed that the reversibility of this pre-melting transition of both native and partially delipidated bR is time-dependent and becomes irreversible upon holding at 91 degrees C between 10 and 30 min. These results are discussed in terms of the lipid and lattice contribution to the protein thermal stability of native bR.

Light-Induced Hydrolysis and Rebinding of Nonisomerizable Bacteriorhodopsin Pigment

Bacteriorhodopsin (bR) is characterized by a retinal-protein protonated Schiff base covalent bond, which is stable for light absorption. We have revealed a light-induced protonated Schiff base hydrolysis reaction in a 13- cis locked bR pigment (bR5.13; λ max = 550 nm) in which isomerization around the critical C 13 C 14 double bond is prevented by a rigid ring structure. The photohydrolysis reaction takes place without isomerization around any of the double bonds along the polyene chain and is indicative of protein conformational alterations probably due to light-induced polarization of the retinal chromophore. Two photointermediates are formed during the hydrolysis reaction, H450 ( λ max = 450 nm) and H430 ( λ max = 430 nm), which are characterized by a 13- cis configuration as analyzed by high-performance liquid chromatography. Upon blue light irradiation after the hydrolysis reaction, these intermediates rebind to the apomembrane to reform bR5.13. Irradiation of the H450 intermediate forms the original pigment, whereas irradiation of H430 at neutral pH results in a red shifted species (P580), which thermally decays back to bR5.13. Electron paramagnetic resonance (EPR) spectroscopy indicates that the cytoplasmic side of bR5.13 resembles the conformation of the N photointermediate of native bR. Furthermore, using osmotically active solutes, we have observed that the hydrolysis rate is dependent on water activity on the cytoplasmic side. Finally, we suggest that the hydrolysis reaction proceeds via the reversed pathway of the binding process and allows trapping a new intermediate, which is not accumulated in the binding process.

Fourier Transform Infrared Study of the Effect of Different Cations on Bacteriorhodopsin Protein Thermal Stability

The effect of divalent ion binding to deionized bacteriorhodopsin (dI-bR) on the thermal transitions of the protein secondary structure have been studied by using temperature-dependent Fourier transform infrared (FT-IR) spectroscopy. The native metal ions in bR, Ca 2+, and Mg 2+, which we studied previously, are compared with Mn 2+, Hg 2+, and a large, synthesized divalent organic cation, ((Et) 3N) 2Bu 2+. It was found that in all cases of ion regeneration, there is a pre-melting, reversible conformational transition in which the amide frequency shifts from 1665 to 1652 cm −1. This always occurs at ∼80°C, independent of which cation is used for the regeneration. The irreversible thermal transition (melting), monitored by the appearance of the band at 1623 cm −1, is found to occur at a lower temperature than that for the native bR but higher than that for acid blue bR in all cases. However, the temperature for this transition is dependent on the identity of the cation. Furthermore, it is shown that the mechanism of melting of the organic cation regenerated bR is different than for the metal cations, suggesting a difference in the type of binding to the protein (either to different sites or different binding to the same site). These results are used to propose specific direct binding mechanisms of the ions to the protein of deionized bR.

Retinal isomerization in bacteriorhodopsin is controlled by specific chromophore-protein interactions. A study with noncovalent artificial pigments.

It has previously been shown that, in mutants lacking the Lys-216 residue, protonated Schiff bases of retinal occupy noncovalently the bacteriorhodopsin (bR) binding site. Moreover, the retinal-Lys-216 covalent bond is not a prerequisite for initiating the photochemical and proton pump activity of the pigment. In the present work, various Schiff bases of aromatic polyene chromophores were incubated with bacterioopsin to give noncovalent pigments that retain the Lys-216 residue in the binding site. It was observed that the pigment's absorption was considerably red-shifted relative to the corresponding protonated Schiff bases (PSB) in solution and was sensitive to Schiff base linkage substitution. Their PSB pK(a) is considerably elevated, similarly to those of related covalently bound pigments. However, the characteristic low-pH purple to blue transition is not observed, but rather a chromophore release from the binding site takes place that is characterized by a pK(a) of approximately 6 (sensitive to the specific complex). It is suggested that, in variance with native bR, in these complexes Asp-85 is protonated and Asp-212 serves as the sole negatively charged counterion. In contrast to the bound analogues, no photocycle could be detected. It is suggested that a specific retinal-protein geometrical arrangement in the binding site is a prerequisite for achieving the selective retinal photoisomerization.

Effect of temperature, pH, and metal ion binding on the secondary structure of bacteriorhodopsin: FT-IR study of the melting and premelting transition temperatures.

We have measured the temperature dependence of the FT-IR spectra of bacteriorhodopsin (bR) as a function of the pH and of the divalent cation regeneration with Ca(2+) and Mg(2+). It has been found that although the irreversible melting transition shows a strong dependence on the pH of the native bR, the premelting reversible transition at 78-80 degrees C shows very little variation over the pH range studied. It is further shown that the acid blue bR shows a red-shifted amide I spectrum at physiological temperature, which shows a more typical alpha-helical frequency component at 1652 cm(-)(1) and could be the reason for the observed reduction of its melting temperature and lack of an observed premelting transition. Furthermore, the thermal transitions for Ca(2+)- and Mg(2+)-regenerated bR (Ca-bR and Mg-bR, respectively) each show a premelting transition at the same 78-80 degrees C temperature as the native purple membrane, but the irreversible melting transition has a slight dependence on the cation identity. The pH dependence of the Ca(2+)-regenerated bR is studied, and neither transition varies over the pH range studied. These results are discussed in terms of the cation contribution to the secondary structural stability in bR.

Kinetics of photo-active bacteriorhodopsin analog 3,4-didehydroretinal

Kinetics of the photo-induced processes of the transient states of the 3,4-didehydroretinal (3,4-dhr) modified bacteriorhodopsin (bR) was studied by a flash photolysis method in a water suspension at room temperature. The excitation initiated a photocycle with several transient intermediates similar to the trans photocycle of native bR. The main observation of the study was that although major part (80%) of the population of the M state relaxed via the O intermediate as in natural bR, 20% relaxed directly to the bR ground state in 200 ms.

Spectral and Kinetic Fluorescence Properties of Native and Nonisomerizing Retinal in Bacteriorhodopsin

Steady-state and picosecond (ps) fluorescence studies of wild-type bacteriorhodopsin (wt-bR) and of a nonisomerizing analog locked in the all-trans configuration have been performed. Extending earlier work done by femtosecond absorption spectroscopy, we observe a strong similarity between both proteins in both fluorescence spectra and Stokes shift thus confirming the previous result that the fluorescent state I460 of the native bR proteins is in the all-trans configuration. Comparison of the spectra of fluorescence and stimulated emission of the locked pigments indicates the presence of an excited-state absorption situated around 750 nm. Upon increase of the excitation energy, the time-integrated fluorescence shows an interesting weak blue shift, which is identical for both pigments. Finally, we discuss the primary structural processes in retinal and in the protein that lead to the sub-100 fs formation of I460 and in particular to the considerable Stokes shift.