Native Auricular Cartilage Research Articles

Upregulated desmin/integrin β1/MAPK axis promotes elastic cartilage regeneration with increased ECM mechanical strength.

Elastic cartilage tissue engineering is promising for providing available scaffolds for plastic reconstructive surgery. The insufficient mechanical strength of regenerative tissue and scarce resources of reparative cells are two obstacles for the preparation of tissue-engineered elastic cartilage scaffolds. Auricular chondrocytes are important reparative cells for elastic cartilage tissue engineering, but resources are scarce. Identifying auricular chondrocytes with enhanced capability of elastic cartilage formation is conducive to reducing the damage to donor sites by decreasing the demand on native tissue isolation. Based on the biochemical and biomechanical differences in native auricular cartilage, we found that auricular chondrocytes with upregulated desmin expressed more integrin β1, forming a stronger interaction with the substrate. Meanwhile, activated MAPK pathway was found in auricular chondrocytes highly expressing desmin. When desmin was knocked down, the chondrogenesis and mechanical sensitivity of chondrocytes were both impaired, and the MAPK pathway was downregulated. Finally, auricular chondrocytes highly expressing desmin regenerated more elastic cartilage with increased ECM mechanical strength. Therefore, desmin/integrin β1/MAPK signaling can not only serve as a selection standard but also a manipulation target of auricular chondrocytes to promote elastic cartilage regeneration.

Biofabrication of a shape-stable auricular structure for the reconstruction of ear deformities.

Bioengineering of the human auricle remains a significant challenge, where the complex and unique shape, the generation of high-quality neocartilage, and shape preservation are key factors. Future regenerative medicine–based approaches for auricular cartilage reconstruction will benefit from a smart combination of various strategies. Our approach to fabrication of an ear-shaped construct uses hybrid bioprinting techniques, a recently identified progenitor cell population, previously validated biomaterials, and a smart scaffold design. Specifically, we generated a 3D-printed polycaprolactone (PCL) scaffold via fused deposition modeling, photocrosslinked a human auricular cartilage progenitor cell–laden gelatin methacryloyl (gelMA) hydrogel within the scaffold, and cultured the bioengineered structure in vitro in chondrogenic media for 30 days. Our results show that the fabrication process maintains the viability and chondrogenic phenotype of the cells, that the compressive properties of the combined PCL and gelMA hybrid auricular constructs are similar to native auricular cartilage, and that biofabricated hybrid auricular structures exhibit excellent shape fidelity compared with the 3D digital model along with deposition of cartilage-like matrix in both peripheral and central areas of the auricular structure. Our strategy affords an anatomically enhanced auricular structure with appropriate mechanical properties, ensures adequate preservation of the auricular shape during a dynamic in vitro culture period, and enables chondrogenically potent progenitor cells to produce abundant cartilage-like matrix throughout the auricular construct. The combination of smart scaffold design with 3D bioprinting and cartilage progenitor cells holds promise for the development of clinically translatable regenerative medicine strategies for auricular reconstruction.

Fabrication of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction.

Fibrin gel-based scaffolds have promising potential for microtia reconstruction. Autologous chondrocytes and chondrocyte cell sheets are frequently used seed cell sources for cartilage tissue engineering. However, the aesthetic outcome of chondrocyte-based microtia reconstruction is still not satisfactory. In this study, we aimed to fabricate the chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction. We designed a unique auricular mold that could fabricate a fibrin gel scaffold resembling human auricle anatomy. Primary chondrocytes were harvested from rabbit auricular cartilage, and chondrocyte cell sheets were developed. Chondrocyte-microtissues were prepared from the cell sheets. The mixture of chondrocytes/chondrocyte-microtissues was laden in fibrin gel during the auricular scaffold fabrication. The protrusions and recessed structure in the auricular scaffold surface were still clearly distinguishable. After a one-week in vitro culture, the 3 D structure and auricular anatomy of the scaffold were retained. And followed by eight-week subcutaneous implantation, cartilaginous tissue was regenerated in the artificial auricular structure as indicated by the results of H&E, Toluidine blue, Safranin O, and type II collagen (immunohistochemistry) staining. Protrusions and depressions of the auricular scaffold were slightly deformed, but the overall auricular anatomy was maintained after 8-week in vivo implantation. Extracellular matrix components content were similar in artificial auricular cartilage and rabbit native auricular cartilage. In conclusion, the mixture of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold showed a promising potential for cartilaginous tissue regeneration, suggesting this as an effective approach for autologous chondrocyte-based microtia reconstruction.

Cartilage regeneration using decellularized cartilage matrix: Long-term comparison of subcutaneous and intranasal placement in a rabbit model

Autologous cartilage as donor tissue for various surgical reconstructions such as nasal septum regeneration is limited and associated with donor site morbidity. Our goal was to evaluate a new resorbable chondroconductive biomaterial made of decellularized porcine nasal septum cartilage compared with autologous native auricular cartilage as the gold standard. In order to examine the material and determine its long-term outcome further, we used subcutaneous implantation and septal implantation in an orthotopic rabbit model. In addition to non-seeded decellularized xenogenic cartilage, chondrocyte-seeded decellularized xenogenic cartilage was implanted as a septal replacement. After a three- or six-month period, the formation of newly synthesized cartilage extracellular matrix was evaluated immunohistochemically, whereas septal integrity and biocompatibility were evaluated histologically. The formation of the implanted neoseptum and form stability was analyzed by using 7-Tesla Magnetic Resonance Imaging.Good biocompatibility with no excessive rejection was demonstrated in all groups. Long-term stable and reliable septal reconstruction could be achieved in the study groups with or without cell seeding with autologous auricular chondrocytes. Autologous cell seeding was advantageous only with regard to septal perforations. Thus, cell seeding provides a benefit regarding long-term stability. However, because of slightly better biocompatibility, less pronounced septum deviation and the markedly lower effort involved, the non-seeded scaffold is favoured for possible clinical application.

Abstract: Scaffolding the Scaffold: 3D-Printed External Biodegradable Cage Mitigates Contraction during Maturation of Elastic Cartilage Constructs

INTRODUCTION: Although in previous work we have successfully generated full-scale ear constructs from human auricular chondrocytes (HAuC) and Human Mesenchymal Stem Cells, the main obstacle for clinical translation of the constructs is the shrinkage and loss of topographic definition that occurs during their in vivo implantation/maturation phase. It is known that tension forces generated by skin and other surrounding tissues contribute to the contraction and loss of topography of a collagen hydrogel. We hypothesize that 3D-printing of an external cage to surround our collagen-chondrocyte hydrogel will allow us to study how shielding our auricular scaffolds from naturally occurring external forces has the potential to reduce contraction and preserve topography, while not interfering with neocartilage formation METHODS: HAuCs were isolated from discarded otoplasty specimens and then encapsulated into 8mm disc type I collagen hydrogels with a cell density of 25 million cells/mL. Custom external cages were 3D-printed out of biocompatible polylactic acid (PLA) with high fidelity contour matching to the hydrogel. The hydrogels surrounded by the PLA cages were implanted into the dorsum of nude mice and explanted after 1 month in vivo for analysis. RESULTS: The external PLA cages were able to maintain their shape/strength after 1 month in vivo, providing the protection the hydrogels needed for undisturbed formation of neocartilage. After 1 month in vivo, the discs developed a shiny white cartilage-like appearance, similar to native auricular cartilage. The discs maintained in the external cages contracted on average only 4.17%, which is significantly less contraction than our usual human auricular cartilage constructs, which contract at least 25%. In addition, safranin-o staining shows cartilage formation, proving our design allows sufficient flow of nutrients in vivo for chondrocyte survival and function. CONCLUSION: We have shown that a custom 3D-printed external cage made out of a biocompatible and biodegradable material can be used to mitigate contraction of our auricular chondrocyte scaffolds. We have validated a methodology that not only has the potential to optimize our tissue engineered auricles, but to solve a problem of cartilage contraction well documented in literature that no one has been able to conquer before. The same technique can be applied to create cages that faithfully conform to the contour of full scale auricular scaffolds in order to preserve their complex topography.

Bioengineering pediatric scaffold-free auricular cartilaginous constructs.

The use of exogenous materials as scaffolds in cartilage tissue engineering has limited the clinical application of resultant constructs due to the risk of postoperative complications. In an effort to minimize such complications, we aim to generate human, scaffold-free auricular cartilaginous constructs. Laboratory study using pediatric auricular cartilage. Remnant, normal pediatric auricular cartilage samples that would have otherwise been discarded were collected and digested to free cells. Harvested cells were cultured and expanded in vitro for two passages and plated as micromass cultures. The culture medium was replaced with a chemically defined chondrogenic medium, and cellular monolayers surrounding micromass cultures were continuously scraped off. Constructs were allowed to mature for a period of 8 weeks. Micromass constructs showed mechanical stability and structurally resembled native auricular tissue, with a perichondrium-like layer of cells surrounding the inner cartilaginous zone. Constructs accumulated equivalent sulphated glycosaminoglycan and 50% of collagen content compared to native auricular cartilage by mass, while displaying 156% more cellularity. High-density micromass cultures of pediatric auricular chondrocytes can generate stable cartilaginous constructs following prolonged chondrogenic inductions in vitro. This technique is an essential step toward the development of three-dimensional constructs to recreate clinically applicable auricular cartilaginous constructs. NA. Laryngoscope, 127:E153-E158, 2017.

Growth factor stimulation improves the structure and properties of scaffold-free engineered auricular cartilage constructs.

The reconstruction of the external ear to correct congenital deformities or repair following trauma remains a significant challenge in reconstructive surgery. Previously, we have developed a novel approach to create scaffold-free, tissue engineering elastic cartilage constructs directly from a small population of donor cells. Although the developed constructs appeared to adopt the structural appearance of native auricular cartilage, the constructs displayed limited expression and poor localization of elastin. In the present study, the effect of growth factor supplementation (insulin, IGF-1, or TGF-β1) was investigated to stimulate elastogenesis as well as to improve overall tissue formation. Using rabbit auricular chondrocytes, bioreactor-cultivated constructs supplemented with either insulin or IGF-1 displayed increased deposition of cartilaginous ECM, improved mechanical properties, and thicknesses comparable to native auricular cartilage after 4 weeks of growth. Similarly, growth factor supplementation resulted in increased expression and improved localization of elastin, primarily restricted within the cartilaginous region of the tissue construct. Additional studies were conducted to determine whether scaffold-free engineered auricular cartilage constructs could be developed in the 3D shape of the external ear. Isolated auricular chondrocytes were grown in rapid-prototyped tissue culture molds with additional insulin or IGF-1 supplementation during bioreactor cultivation. Using this approach, the developed tissue constructs were flexible and had a 3D shape in very good agreement to the culture mold (average error <400 µm). While scaffold-free, engineered auricular cartilage constructs can be created with both the appropriate tissue structure and 3D shape of the external ear, future studies will be aimed assessing potential changes in construct shape and properties after subcutaneous implantation.

Development of Scaffold-Free Elastic Cartilaginous Constructs with Structural Similarities to Auricular Cartilage

External ear reconstruction with autologous cartilage still remains one of the most difficult problems in the fields of plastic and reconstructive surgery. As the absence of tissue vascularization limits the ability to stimulate new tissue growth, relatively few surgical approaches are currently available (alloplastic implants or sculpted autologous cartilage grafts) to repair or reconstruct the auricle (or pinna) as a result of traumatic loss or congenital absence (e.g., microtia). Alternatively, tissue engineering can offer the potential to grow autogenous cartilage suitable for implantation. While tissue-engineered auricle cartilage constructs can be created, a substantial number of cells are required to generate sufficient quantities of tissue for reconstruction. Similarly, as routine cell expansion can elicit negative effects on chondrocyte function, we have developed an approach to generate large-sized engineered auricle constructs (≥3 cm(2)) directly from a small population of donor cells (20,000-40,000 cells/construct). Using rabbit donor cells, the developed bioreactor-cultivated constructs adopted structural-like characteristics similar to native auricular cartilage, including the development of distinct cartilaginous and perichondrium-like regions. Both alterations in media composition and seeding density had profound effects on the formation of engineered elastic tissue constructs in terms of cellularity, extracellular matrix accumulation, and tissue structure. Higher seeding densities and media containing sodium bicarbonate produced tissue constructs that were closer to the native tissue in terms of structure and composition. Future studies will be aimed at improving the accumulation of specific tissue constituents and determining the clinical effectiveness of this approach using a reconstructive animal model.

Ex Vivo Electromechanical Reshaping of Costal Cartilage in the New Zealand White Rabbit Model

Determine the effective electromechanical reshaping (EMR) parameters for shape change and cell viability in the ex vivo rabbit costal cartilage model. Ex vivo animal study combined with computer modeling to guide electrode placement and polarity selection. Rabbit costal cartilages were secured in a jig that approximated the shape of the rabbit auricle framework. Finite element modeling was used to select the initial electrode geometry, polarity, spacing, and estimate dosimetry parameters. Porcine costal cartilage was utilized to refine the selection of dosing parameters. Parametric analysis was performed to determine the effect of voltage and application time on tissue shape change. Next, rabbit rib cartilage was reshaped, varying voltage and application time to identify the lowest parameters to produce acceptable shape change mimicking native auricular cartilage. Acceptable qualitative shape change was determined on a five-point Likert scale analyzed using one-way general linear analysis of variance. Confocal microscopy with live/dead cell viability analysis determined the degree of injury and the distribution of live and dead cells. The minimum acceptable deformation of rabbit costal cartilage was found at 4 V-3 minutes. Viability analysis of cartilage reshaped at 4 V-3 minutes demonstrates cell injury extending 2 mm away from each electrode with viable cells found between the electrodes. The EMR parameters of 4 V-3 minutes demonstrates appropriate shape change producing grafts that resemble the native auricle and contains the viable cells adequate for clinical evaluation. The rabbit auricular reconstruction model using EMR is a feasible one.

Hyaluronan‐Based Scaffolds to Tissue‐Engineer Cartilage Implants for Laryngotracheal Reconstruction

Donor site morbidity, including pneumothorax, can be a considerable problem when harvesting cartilage grafts for laryngotracheal reconstruction (LTR). Tissue-engineered cartilage may offer a solution to this problem. This study investigated the feasibility of using Hyalograft C combined with autologous chondrocytes to tissue engineer cartilage grafts for LTR in rabbits. Animal study. Eighteen New Zealand white rabbits underwent LTR: 12 rabbits received autologous tissue-engineered cartilage grafts and 6 animals, serving as a positive control group, native auricular cartilage. To determine any differences in response to the site of implantation and any potential immune response to the scaffold, a second piece of engineered neocartilage and a non-cell-loaded scaffold were inserted paralaryngeally into a subset of the rabbits. The rabbits were sacrificed 3, 6, 8, 10, and 12 weeks after the LTR and their larynx examined. None of the 18 rabbits showed signs of respiratory distress. A smooth, noninflammatory scar was visible intraluminally. Histologically, the native auricular cartilage implants showed excellent integration without any signs of inflammation or cartilage degradation. In contrast, all tissue-engineered grafts and empty scaffolds revealed marked signs of an unspecific foreign body reaction, leading to a complete degradation of the neocartilage, whether implanted para- or intralaryngeally. In contrast to the success with which Hyalograft C has been applied in articular defect repair, our results indicate that, in rabbits, Hyalograft C initiates a foreign body reaction if implanted intra- or paralaryngeally, leading to cartilage degradation and possible graft failure. These findings suggest limitations on the environment in which Hyalograft C can be applied.

Effects of Auricular Chondrocyte Expansion on Neocartilage Formation in Photocrosslinked Hyaluronic Acid Networks

The overall objective of this study was to examine the effects of in vitro expansion on neocartilage formation by auricular chondrocytes photoencapsulated in a hyaluronic acid (HA) hydrogel as a next step toward the clinical application of tissue engineering therapies for treatment of damaged cartilage. Swine auricular chondrocytes were encapsulated either directly after isolation (p = 0), or after further in vitro expansion ( p = 1 and p = 2) in a 2 wt%, 50-kDa HA hydrogel and implanted subcutaneously in the dorsum of nude mice. After 12 weeks, constructs were explanted for mechanical testing and biochemical and immunohistochemical analysis and compared to controls of HA gels alone and native cartilage. The compressive equilibrium moduli of the p = 0 and p = 1 constructs (51.2 +/- 8.0 and 72.5 +/- 35.2 kPa, respectively) were greater than the p = 2 constructs (26.8 +/- 14.9 kPa) and the control HA gel alone (12.3 +/- 1.3 kPa) and comparable to auricular cartilage (35.1 +/- 12.2 kPa). Biochemical analysis showed a general decrease in glycosaminoglycan (GAG), collagen, and elastin content with chondrocyte passage, though no significant differences were found between the p = 0 and p = 1 constructs for any of the analyses. Histological staining showed intense and uniform staining for aggrecan, as well as greater type II collagen versus type I collagen staining in all constructs. Overall, this study illustrates that constructs with the p = 0 and p = 1 auricular chondrocytes produced neocartilage tissue that resembled native auricular cartilage after 12 weeks in vivo. However, these results indicate that further expansion of the chondrocytes (p = 2) can lead to compromised tissue properties.

Tissue engineering of cartilage with the use of chitosan-gelatin complex scaffolds.

Chitosan has been shown to be a promising scaffold for various applications in tissue engineering. In this study, a chitosan-gelatin complex was fabricated as a scaffold by a freezing and lyophilizing technique. Chitosan's structure and characteristics are similar to those of glycosaminoglycan (GAG) and its analogs, and possesses various biological activities, whereas gelatin can serve as a substrate for cell adhesion, differentiation, and proliferation. With the use of autologous chondrocytes isolated from pig's auricular cartilage and seeded onto the chitosan-gelatin scaffold, elastic cartilages have been successfully engineered at the porcine abdomen subcutaneous tissue. After 16 weeks of implantation, the engineered elastic cartilages have acquired not only normal histological and biochemical, but also mechanical properties. The tissue sections of the engineered elastic cartilages showed that the chondrocytes were enclosed in the lacuna, similar to that of native cartilage. The presence of elastic fibers in the engineered cartilages was also demonstrated by Vehoeff's staining, and immunohistochemical staining confirmed the presence of type II collagen in the engineered cartilages. Quantitatively, the GAG in the engineered cartilages reached 90% of the concentration in native auricular cartilage. Furthermore, biomechanical analysis demonstrated that the extrinsic stiffness of the engineered cartilages reached 85% of the level in native auricular cartilage when it was harvested at 16 weeks. Thus, this study demonstrated that the chitosan-gelatin complex may serve as a suitable scaffold for cartilage tissue engineering.

Characteristics of tissue-engineered cartilage from human auricular chondrocytes

This study was done to define the mechanical and histological properties of tissue-engineered cartilage (TEC) derived from human chondrocytes and to compare these findings with those of native cartilage. Chondrocytes were obtained from 10 human auricular cartilages and seeded onto a biodegradable template of polyglycolic acid and poly l-lactic acid. Each template was shaped into a 1 cm×2 cm rectangle. The templates were implanted in athymic mice for 8 weeks. Eight human auricular cartilages were used for comparison. Mechanical analysis with a tensile testing device provided values of ultimate tensile strength (UTS), stiffness, and resilience. Statistical analysis was performed with the Student's t-test. Histological assessment was done with hematoxylin-eosin staining along with other special stains. The TEC had UTS of 2.07 MPa, stiffness of 3.7 MPa, and resilience of 0.37 J/m 3. The control specimens had UTS of 2.18 MPa, stiffness of 5.11 MPa, and resilience of 0.42 J/m 3. No statistical difference was found between the experimental and control groups for each of the three parameters. Histological analysis showed mature cartilage with characteristic collagen, glycosaminoglycans, and elastin in the TEC. The neo-cartilage showed slightly smaller size and more irregular distribution of chondrocytes and unique fibrous capsule formation with peripheral infiltration of fibrous tissue. This study showed that the mechanical qualities of TEC from human chondrocytes are similar to those of native auricular cartilage. It suggests that the engineered cartilage from human chondrocytes may have sufficient strength and durability for clinical uses. The histological findings revealed some differences with neo-cartilage.

Bioengineering of elastic cartilage with aggregated porcine and human auricular chondrocytes and hydrogels containing alginate, collagen, and kappa-elastin.

Transplantation of isolated chondrocytes has long been acknowledged as a potential method for rebuilding small defects in damaged or deformed cartilages. Recent advances in tissue engineering permit us to focus on production of larger amounts of cartilaginous tissue, such as might be needed for reconstructive surgery of the entire auricle. In this report we describe modification of the basic techniques that lead to production of a large amount of elastic cartilage originated from porcine and human isolated chondrocytes. Small fragments of auricular cartilage were harvested from children undergoing ear reconstruction for microtia or extirpation of preauricular tags and from ears of juvenile pigs. Enzymatically isolated elastic chondrocytes were then agitated in suspension to form the chondronlike aggregates, which were further embedded in molded hydrogel constructs made of alginate and type I collagen augmented with kappa-elastin. The constructs were then implanted in nude mice and harvested 4 and 12 weeks after heterotransplantation. The resulting neocartilage closely resembled native auricular cartilage at the gross, microscopic, and ultrastructural levels. Immunohistochemistry and electron microscopy additionally confirmed that the newly produced cartilage contained the major components of the elastic cartilage-specific matrix, including collagen type II, proteoglycans, and well-assembled elastic fibers.