National Air Quality Forecast Capability Research Articles

NOAA’s Air Resources Laboratory—75 Years of Research Linking Earth and Sky: A Historical Perspective

Abstract For over 75 years, the National Oceanic and Atmospheric Administration’s Air Resources Laboratory (NOAA ARL) has been at the forefront of federal meteorological and climate research. As the Special Projects Section (SPS) of the U.S. Weather Bureau (USWB), the laboratory pioneered the development of atmospheric trajectory modeling, initially used in studies related to nuclear weapons following World War II. Model development was guided by observations following weapons tests, assisted by later experiments using a wide variety of atmospheric tracers. Today’s familiar Gaussian plume dispersion model, previously in nascent form, was developed and promoted with ARL research, as was the much later and widely used HYSPLIT model. Much of ARL’s early research was focused on the challenges presented by the complex terrain surrounding nuclear installations, often addressed with high-spatial-resolution meteorological measurements, atmospheric tracers, and site-specific models. ARL has since extended boundary layer research to increasingly complex landscapes, such as forests, agricultural lands, and urban areas, and has expanded its research scope to air quality, weather, and climate applications based on the knowledge and experience developed throughout its long history. Examples of these research endeavors include the establishment of the U.S. Climate Reference Network, fundamental contributions to the development of the National Air Quality Forecast Capability, and foundational participation in the National Atmospheric Deposition Program. ARL looks forward to continuing to refine scientific understanding from field experiments, including coupling ground-based experimentation with modeling, and sustained observations, in order to facilitate the transfer of knowledge into practical applications of societal relevance.

Impacts of the COVID-19 economic slowdown on soybean crop yields in the United States

It is without question that the COVID-19 pandemic has taken its toll on the U.S. economy. Stay-at-home orders led to reduced vehicular traffic and widespread declines in anthropogenic emissions (e.g., nitrogen oxides (NOx)). This study is the first to explore the potential consequences of O3 changes resulting from the economic shutdown in the United States on soybean crop yields for 2020. The pandemic’s impact on surface O3 is quantified using the NOAA’s National Air Quality Forecasting Capability (NAQFC), which is based on the Community Multi-Scale Air Quality (CMAQ) model for May–July 2020. The “would-be”, 2020 level business-as-usual (BAU) emissions are compared to a simulation that uses representative COVID-19 (C19) emissions. For each emissions scenario, crop exposures are calculated using the AOT40 cumulative exposure index and then combined with county-level soybean production totals to determine regional yield losses. Exposure changes ranged between – 2 and 2 ppmVhr−1. It was further shown that increased exposures (0.5 to 1.10 ppmVhr−1) in the Southeast U.S. counteracted decreased exposures (0.8 to 0.5 ppmVhr−1) in the other soybean-producing regions. As a result, corresponding yield improvements counteracted yield losses around the Mississippi River Valley and allowed for minimal improvements in soybean production loss totaling $6.5 million over CONUS.

Evaluation of the NAQFC driven by the NOAA Global Forecast System (version 16): comparison with the WRF-CMAQ during the summer 2019 FIREX-AQ campaign

Abstract. The latest operational National Air Quality Forecast Capability (NAQFC) has been advanced to use the Community Multiscale Air Quality (CMAQ) model (version 5.3.1) with the CB6r3 (Carbon Bond 6 revision 3) AERO7 (version 7 of the aerosol module) chemical mechanism and is driven by the Finite-Volume Cubed-Sphere (FV3) Global Forecast System, version 16 (GFSv16). This update has been accomplished via the development of the meteorological preprocessor, NOAA-EPA Atmosphere–Chemistry Coupler (NACC), adapted from the existing Meteorology–Chemistry Interface Processor (MCIP). Differing from the typically used Weather Research and Forecasting (WRF) CMAQ system in the air quality research community, the interpolation-based NACC can use various meteorological outputs to drive the CMAQ model (e.g., FV3-GFSv16), even though they are on different grids. In this study, we compare and evaluate GFSv16-CMAQ and WRFv4.0.3-CMAQ using observations over the contiguous United States (CONUS) in summer 2019 that have been verified with surface meteorological and AIRNow observations. During this period, the Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) field campaign was performed, and we compare the two models with airborne measurements from the NASA DC-8 aircraft. The GFS-CMAQ and WRF-CMAQ systems show similar performance overall with some differences for certain events, species and regions. The GFSv16 meteorology tends to have a stronger diurnal variability in the planetary boundary layer height (higher during daytime and lower at night) than WRF over the US Pacific coast, and it also predicted lower nighttime 10 m winds. In summer 2019, the GFS-CMAQ system showed better surface ozone (O3) than WRF-CMAQ at night over the CONUS domain; however, the models' fine particulate matter (PM2.5) predictions showed mixed verification results: GFS-CMAQ yielded better mean biases but poorer correlations over the Pacific coast. These results indicate that using global GFSv16 meteorology with NACC to directly drive CMAQ via interpolation is feasible and yields reasonable results compared to the commonly used WRF approach.

Development and evaluation of an advanced National Air Quality Forecasting Capability using the NOAA Global Forecast System version 16.

A new dynamical core, known as the Finite-Volume Cubed-Sphere (FV3) and developed at both NASA and NOAA, is used in NOAA's Global Forecast System (GFS) and in limited-area models for regional weather and air quality applications. NOAA has also upgraded the operational FV3GFS to version 16 (GFSv16), which includes a number of significant developmental advances to the model configuration, data assimilation, and underlying model physics, particularly for atmospheric composition to weather feedback. Concurrent with the GFSv16 upgrade, we couple the GFSv16 with the Community Multiscale Air Quality (CMAQ) model to form an advanced version of the National Air Quality Forecasting Capability (NAQFC) that will continue to protect human and ecosystem health in the US. Here we describe the development of the FV3GFSv16 coupling with a "state-of-the-science" CMAQ model version 5.3.1. The GFS-CMAQ coupling is made possible by the seminal version of the NOAA-EPA Atmosphere-Chemistry Coupler (NACC), which became a major piece of the next operational NAQFC system (i.e., NACC-CMAQ) on 20 July 2021. NACC-CMAQ has a number of scientific advancements that include satellite-based data acquisition technology to improve land cover and soil characteristics and inline wildfire smoke and dust predictions that are vital to predictions of fine particulate matter (PM2.5) concentrations during hazardous events affecting society, ecosystems, and human health. The GFS-driven NACC-CMAQ model has significantly different meteorological and chemical predictions compared to the previous operational NAQFC, where evaluation of NACC-CMAQ shows generally improved near-surface ozone and PM2.5 predictions and diurnal patterns, both of which are extended to a 72 h (3 d) forecast with this system.

Improving predictability of high-ozone episodes through dynamic boundary conditions, emission refresh and chemical data assimilation during the Long Island Sound Tropospheric Ozone Study (LISTOS) field campaign

Abstract. Although air quality in the United States has improved remarkably in the past decades, ground-level ozone (O3) often rises in exceedance of the national ambient air quality standard in nonattainment areas, including the Long Island Sound (LIS) and its surrounding areas. Accurate prediction of high-ozone episodes is needed to assist government agencies and the public in mitigating harmful effects of air pollution. In this study, we have developed a suite of potential forecast improvements, including dynamic boundary conditions, rapid emission refresh and chemical data assimilation, in a 3 km resolution Community Multiscale Air Quality (CMAQ) modeling system. The purpose is to evaluate and assess the effectiveness of these forecasting techniques, individually or in combination, in improving forecast guidance for two major air pollutants: surface O3 and nitrogen dioxide (NO2). Experiments were conducted for a high-O3 episode (28–29 August 2018) during the Long Island Sound Tropospheric Ozone Study (LISTOS) field campaign, which provides abundant observations for evaluating model performance. The results show that these forecast system updates are useful in enhancing the capability of this 3 km forecasting model with varying effectiveness for different pollutants. For O3 prediction, the most significant improvement comes from the dynamic boundary conditions derived from the NOAA operational forecast system, National Air Quality Forecast Capability (NAQFC), which increases the correlation coefficient (R) from 0.81 to 0.93 and reduces the root mean square error (RMSE) from 14.97 to 8.22 ppbv, compared to that with the static boundary conditions (BCs). The NO2 from all high-resolution simulations outperforms that from the operational 12 km NAQFC simulation, regardless of the BCs used, highlighting the importance of spatially resolved emission and meteorology inputs for the prediction of short-lived pollutants. The effectiveness of improved initial concentrations through optimal interpolation (OI) is shown to be high in urban areas with high emission density. The influence of OI adjustment, however, is maintained for a longer period in rural areas, where emissions and chemical transformation make a smaller contribution to the O3 budget than that in high-emission areas. Following the assessment of individual updates, the forecasting system is configured with dynamic boundary conditions, optimal interpolation of initial concentrations and emission adjustment, to simulate a high-ozone episode during the 2018 LISTOS field campaign. The newly developed forecasting system significantly reduces the bias of surface NO2 prediction. When compared with the NASA Langley GeoCAPE Airborne Simulator (GCAS) vertical column density (VCD), this system is able to reproduce the NO2 VCD with a higher correlation (0.74), lower normalized mean bias (40 %) and normalized mean error (61 %) than NAQFC (0.57, 45 % and 76 %, respectively). The 3 km system captures magnitude and timing of surface O3 peaks and valleys better. In comparison with lidar, O3 profile variability of the vertical O3 is captured better by the new system (correlation coefficient of 0.71) than by NAQFC (correlation coefficient of 0.54). Although the experiments are limited to one pollution episode over the Long Island Sound, this study demonstrates feasible approaches to improve the predictability of high-O3 episodes in contemporary urban environments.

Acute ambient air pollution exposure and placental Doppler results in the NICHD fetal growth studies – Singleton cohort

BackgroundIncreased placental vascular resistance is a proposed mechanism by which air pollution exposure during pregnancy lowers birth weight and increases pregnancy-induced hypertensive disorders. ObjectiveTo examine the impact of acute air pollution exposure during pregnancy on uterine and umbilical artery Doppler indicators of placental vascular resistance. MethodsAfter a first ultrasound to confirm gestational age, 2562 pregnant women recruited in 12 clinics throughout the United States underwent up to five standardized ultrasounds with Doppler measurements. Exposures to 11 air pollutants were estimated for the hour of ultrasound and each of the 2 h prior to ultrasound at the clinics using the National Air Quality Forecast Capability reanalysis products. We used mixed logistic regression to study the longitudinal odds ratio (OR) of any, uni- or bi-lateral systolic and diastolic uterine artery notching compared to no notching and the longitudinal OR of abnormal end diastolic flow of the umbilical artery compared to forward flow. Uterine and umbilical artery resistance indexes were studied using linear mixed models. ResultsEach inter-quartile range (IQR) increase of particulate matter < 2.5 μm, nitrate, ammonium, primary organic matter (POM) and nitrogen dioxide during the hour of ultrasound was associated with a decreased risk of unilateral systolic notch and with increased resistance index of the left uterine artery. For the umbilical artery, each IQR increase in ozone was associated with decreased resistance index (b: −0.26, 95 % CI: −0.52, −0.01) and with a decreased risk of abnormal end diastolic flow (OR: 0.36, 95 % CI: 0.14, 0.94); while each IQR increase of elemental carbon and POM was associated with increased risk of abnormal end diastolic flow (OR: 1.47, 95 % CI: 1.02, 2.13 and OR: 1.67, 95 % CI: 1.17, 2.39, respectively). DiscussionOur results suggest acute air pollution exposure may influence placental vascular resistance.

Evaluation of the offline-coupled GFSv15-FV3-CMAQv5.0.2 in support of the next-generation National Air Quality Forecast Capability over the contiguous United States.

As a candidate for the next-generation National Air Quality Forecast Capability (NAQFC), the meteorological forecast from the Global Forecast System with the new Finite Volume Cube-Sphere dynamical core (GFS–FV3) will be applied to drive the chemical evolution of gases and particles described by the Community Multiscale Air Quality modeling system. CMAQv5.0.2, a historical version of CMAQ, has been coupled with the North American Mesoscale Forecast System (NAM) model in the current operational NAQFC. An experimental version of the NAQFC based on the offline-coupled GFS–FV3 version 15 with CMAQv5.0.2 modeling system (GFSv15–CMAQv5.0.2) has been developed by the National Oceanic and Atmospheric Administration (NOAA) to provide real-time air quality forecasts over the contiguous United States (CONUS) since 2018. In this work, comprehensive region-specific, time-specific, and categorical evaluations are conducted for meteorological and chemical forecasts from the offline-coupled GFSv15–CMAQv5.0.2 for the year 2019. The forecast system shows good overall performance in forecasting meteorological variables with the annual mean biases of −0.2 °C for temperature at 2 m, 0.4% for relative humidity at 2 m, and 0.4 m s−1 for wind speed at 10 m compared to the METeorological Aerodrome Reports (METAR) dataset. Larger biases occur in seasonal and monthly mean forecasts, particularly in spring. Although the monthly accumulated precipitation forecasts show generally consistent spatial distributions with those from the remote-sensing and ensemble datasets, moderate-to-large biases exist in hourly precipitation forecasts compared to the Clean Air Status and Trends Network (CASTNET) and METAR. While the forecast system performs well in forecasting ozone (O3) throughout the year and fine particles with a diameter of 2.5 μm or less (PM2.5) for warm months (May–September), it significantly overpredicts annual mean concentrations of PM2.5. This is due mainly to the high predicted concentrations of fine fugitive and coarse-mode particle components. Underpredictions in the southeastern US and California during summer are attributed to missing sources and mechanisms of secondary organic aerosol formation from biogenic volatile organic compounds (VOCs) and semivolatile or intermediate-volatility organic compounds. This work demonstrates the ability of FV3-based GFS in driving the air quality forecasting. It identifies possible underlying causes for systematic region- and time-specific model biases, which will provide a scientific basis for further development of the next-generation NAQFC.

Comparison of chemical lateral boundary conditions for air quality predictions over the contiguous United States during pollutant intrusion events

Abstract. The National Air Quality Forecast Capability (NAQFC) operated in the US National Oceanic and Atmospheric Administration (NOAA) provides the operational forecast guidance for ozone and fine particulate matter with aerodynamic diameters less than 2.5 µm (PM2.5) over the contiguous 48 US states (CONUS) using the Community Multi-scale Air Quality (CMAQ) model. The existing NAQFC uses climatological chemical lateral boundary conditions (CLBCs), which cannot capture pollutant intrusion events originating outside of the model domain. In this study, we developed a model framework to use dynamic CLBCs from the Goddard Earth Observing System Model, version 5 (GEOS) to drive NAQFC. A mapping of the GEOS chemical species to CMAQ's CB05–AERO6 (Carbon Bond 5; version 6 of the aerosol module) species was developed. The utilization of the GEOS dynamic CLBCs in NAQFC showed the best overall performance in simulating the surface observations during the Saharan dust intrusion and Canadian wildfire events in summer 2015. The simulated PM2.5 was improved from 0.18 to 0.37, and the mean bias was reduced from −6.74 to −2.96 µg m−3 over CONUS. Although the effect of CLBCs on the PM2.5 correlation was mainly near the inflow boundary, its impact on the background concentrations reached further inside the domain. The CLBCs could affect background ozone concentrations through the inflows of ozone itself and its precursors, such as CO. It was further found that the aerosol optical thickness (AOT) from satellite retrievals correlated well with the column CO and elemental carbon from GEOS. The satellite-derived AOT CLBCs generally improved the model performance for the wildfire intrusion events during a summer 2018 case study and demonstrated how satellite observations of atmospheric composition could be used as an alternative method to capture the air quality effects of intrusions when the CLBCs of global models, such as GEOS CLBCs, are not available.

Improving Air Quality Predictions over the United States with an Analog Ensemble

AbstractAir quality forecasts produced by the National Air Quality Forecasting Capability (NAQFC) help air quality forecasters across the United States in making informed decisions to protect public health from acute air pollution episodes. However, errors in air quality forecasts limit their value in the decision-making process. This study aims to enhance the accuracy of NAQFC air quality forecasts and reliably quantify their uncertainties using a statistical–dynamical method called the analog ensemble (AnEn), which has previously been found to efficiently generate probabilistic forecasts for other applications. AnEn estimates of the probability of the true state of a predictand are based on a current deterministic numerical prediction and an archive of prior analogous predictions paired with prior observations. The method avoids the complexity and real-time computational expense of model-based ensembles and is proposed here for the first time for air quality forecasting. AnEn is applied with forecasts from the Community Multiscale Air Quality (CMAQ) model. Relative to CMAQ raw forecasts, deterministic forecasts of surface ozone (O3) and particulate matter of aerodynamic diameter smaller than 2.5 μm (PM2.5) based on AnEn’s mean have lower systemic and random errors and are overall better correlated with observations; for example, when computed across all sites and lead times, AnEn’s root-mean-square error is lower than CMAQ’s by roughly 35% and 30% for O3 and PM2.5, respectively, and AnEn improves the correlation by 50% for O3 and PM2.5. Probabilistic forecasts from AnEn are statistically consistent, reliable, and sharp, and they quantify the uncertainty of the underlying prediction.

Air quality impacts of the 2018 Mt. Kilauea Volcano eruption in Hawaii: A regional chemical transport model study with satellite-constrained emissions

Abstract Volcanic eruptions could bring a vast amount of sulfur dioxide (SO2) and ash into the air, often imposing substantial impacts on air quality and the ecosystem. Quantifying its impacts, however, is difficult due to the uncertainties in estimating the strength and variations of volcanic emissions. Here we developed and evaluated a new approach to combine satellite SO2 detection and chemical transport modeling to assess the impact of the 2018 Mt. Kilauea eruption on air quality over Hawaii. During the sustained eruption of the Kilauea Volcano in Hawaii's Big Island from May to July 2018, considerable SO2 and PM2.5 enhancements were observed both from the ground and from space. We studied this case using an experimental version of the NOAA National Air Quality Forecast Capability (NAQFC) modeling system. Daily emissions of SO2 and ash were estimated using a combination of SO2 column density retrieved by Ozone Mapping and Profiling Suite (OMPS) Nadir-Mapper (NM) aboard the Suomi-NPP satellite and the NAQFC model with an inverse emission modeling approach. We found that the volcanic SO2 emission rates peaked at 15,000 mol/s from the Kilauea's East Rift zone and Summit. The formation and transport of volcanic smog, or Vog, was highly dependent upon the vertical distribution of the volcanic emission, controlled by the heat flux of emission sources. We conducted four model simulations with various emission settings, and compared them to satellite data (CALIOP, OMPS and VIIRS) and in-situ measurements. All the runs tended to underpredict the peak values of surface SO2 and PM2.5 (particulate matter smaller than 2.5 μm in diameter). The “No Plume Rise” run underestimated the Vog plume rise and downstream transport. Using fixed emission rate or removing the temporal variations (”3-Day Mean”) led to miss peak Vog effects or inconsistent transport pattern compared to the observations. Therefore, the Base simulation with daily-varying emission and plume rise was used to quantify the air quality effects of the Kilauea eruption. We found that the volcanic eruption elevated surface PM2.5 concentration by 30–40 μg/m3 in the southeast part of the Big Island, with peak values up to 300 μg/m3. The Vog effect on trace gases, such as O3, NOx, and non-methane hydrocarbons, were much weaker (

Evaluating a fire smoke simulation algorithm in the National Air Quality Forecast Capability (NAQFC) by using multiple observation data sets during the Southeast Nexus (SENEX) field campaign

Abstract. Multiple observation data sets – Interagency Monitoring of Protected Visual Environments (IMPROVE) network data, the Automated Smoke Detection and Tracking Algorithm (ASDTA), Hazard Mapping System (HMS) smoke plume shapefiles and aircraft acetonitrile (CH3CN) measurements from the NOAA Southeast Nexus (SENEX) field campaign – are used to evaluate the HMS–BlueSky–SMOKE (Sparse Matrix Operator Kernel Emission)–CMAQ (Community Multi-scale Air Quality Model) fire emissions and smoke plume prediction system. A similar configuration is used in the US National Air Quality Forecasting Capability (NAQFC). The system was found to capture most of the observed fire signals. Usage of HMS-detected fire hotspots and smoke plume information was valuable for deriving both fire emissions and forecast evaluation. This study also identified that the operational NAQFC did not include fire contributions through lateral boundary conditions, resulting in significant simulation uncertainties. In this study we focused both on system evaluation and evaluation methods. We discussed how to use observational data correctly to retrieve fire signals and synergistically use multiple data sets. We also addressed the limitations of each of the observation data sets and evaluation methods.

Evaluating Ammonia (NH3) Predictions in the NOAA NAQFC for Eastern North Carolina Using Ground Level and Satellite Measurements

AbstractAmmonia (NH3) in the atmosphere contributes to the formation of airborne fine particulate matter (PM2.5), which is associated with adverse human health effects. The emission, transport, reactions, and deposition of NH3 in the atmosphere are modeled using the Community Multiscale Air Quality (CMAQ) model, within the U.S. National Air Quality Forecast Capability (NAQFC). The purpose of this current work is to evaluate the capability of the NAQFC CMAQ model and to identify potential improvements to NH3 emissions estimates and prediction methods. This study focuses on CMAQ predictions of atmospheric NH3 in North Carolina, including a region with intensive animal production and enhanced NH3 emissions. The CMAQ model is run for July 2011 using a version of the 2011 National Emissions Inventory in which agricultural NH3 emissions were adjusted to reflect the lower end of the range of estimates from the current process‐based emissions model. The NAQFC CMAQ model overpredicted atmospheric NH3 at a continuous monitor in Clinton, NC, within the region of intensive animal production. The average concentration measured by the monitor was 6.6 ppbv, while the average predicted by the model was 10.5 ppbv, a 60% overprediction. Outside of the region of intensive animal production, both measured and modeled NH3 concentrations were low, 1.3 ppbv or less. The model underpredicted wet deposition of NH4+ and dry deposition of NH3. It is believed that the overestimation of NH3 at Clinton is attributable at least in part to the underestimation of wet and dry deposition in North Carolina.

The Ozone Water-Land Environmental Transition Study (OWLETS): An Innovative Strategy for Understanding Chesapeake Bay Pollution Events.

Coastal regions have historically represented a significant challenge for air quality investigations due to water-land boundary transition characteristics and a paucity of measurements available over water. Prior studies have identified the formation of high levels of ozone over water bodies, such as the Chesapeake Bay, that can potentially recirculate back over land to significantly impact populated areas. Earth-observing satellites and forecast models face challenges in capturing the coastal transition zone where small-scale meteorological dynamics are complex and large changes in pollutants can occur on very short spatial and temporal scales. An observation strategy is presented to synchronously measure pollutants 'over-land' and 'over-water' to provide a more complete picture of chemical gradients across coastal boundaries for both the needs of state and local environmental management and new remote sensing platforms. Intensive vertical profile information from ozone lidar systems and ozonesondes, obtained at two main sites, one over land and the other over water, are complemented by remote sensing and in-situ observations of air quality from ground-based, airborne (both personned and unpersonned), and shipborne platforms. These observations, coupled with reliable chemical transport simulations, such as the NOAA National Air Quality Forecast Capability (NAQFC), are expected to lead to a more fully characterized and complete land-water interaction observing system that can be used to assess future geostationary air quality instruments, such as the NASA Tropospheric Emissions: Monitoring of Pollution (TEMPO) as well as current low earth orbiting satellites, such as the European Space Agency's Sentinel 5-Precursor (S5-P) with its Tropospheric Monitoring Instrument (TROPOMI).

Overview of the Model and Observation Evaluation Toolkit (MONET) Version 1.0 for Evaluating Atmospheric Transport Models

This paper describes the development and initial applications of the Model and Observation Evaluation Tool (MONET) v1.0. MONET was developed to evaluate the Community Multiscale Air Quality Model (CMAQ) for the NOAA National Air Quality Forecast Capability (NAQFC) modeling system. MONET is designed to be a modularized Python package for (1) pairing model output to observational data in space and time; (2) leveraging the pandas Python package for easy searching and grouping; and (3) analyzing and visualizing data. This process introduces a convenient method for evaluating model output. MONET processes data that is easily searchable and that can be grouped using meta-data found within the observational datasets. Common statistical metrics (e.g., bias, correlation, and skill scores), plotting routines such as scatter plots, timeseries, spatial plots, and more are included in the package. MONET is well modularized and can add further observational datasets and different models.

Observed and Model-Derived Ozone Production Efficiency over Urban and Rural New York State

This study examined the model-derived and observed ozone production efficiency (OPE = ∆Ox/∆NOz) in one rural location, Pinnacle State Park (PSP) in Addison, New York (NY), and one urban location, Queens College (QC) in Flushing, NY, in New York State (NYS) during photo-chemically productive hours (11 a.m.–4 p.m. Eastern Standard Time (EST)) in summer 2016. Measurement data and model predictions from National Oceanic and Atmospheric Administration National Air Quality Forecast Capability (NOAA NAQFC)—Community Multiscale Air Quality (CMAQ) model versions 4.6 (v4.6) and 5.0.2 (v5.0.2) were used to assess the OPE at both sites. CMAQ-predicted and observed OPEs were often in poor agreement at PSP and in reasonable agreement at QC, with model-predicted and observed OPEs, ranging from approximately 5–11 and 10–13, respectively, at PSP; and 4–7 and 6–8, respectively, at QC. The observed relationship between OPE and oxides of nitrogen (NOx) was studied at PSP to examine where the OPE downturn may have occurred. Summer 2016 observations at PSP did not reveal a distinct OPE downturn, but they did indicate that the OPE at PSP remained high (10 or greater) regardless of the [NOx] level. The observed OPEs at QC were found by using species-specific reactive odd nitrogen (NOy) instruments and an estimated value for nitrogen dioxide (NO2), since observed OPEs determined using non-specific NOx and NOy instruments yielded observed OPE results that (1) varied from approximately 11–25, (2) sometimes had negative [NOz] concentrations, and (3) were inconsistent with CMAQ-predicted OPE. This difference in observed OPEs at QC depending on the suite of instruments used suggests that species-specific NOx and NOy instruments may be needed to obtain reliable urban OPEs.

Evaluating ammonia (NH3) predictions in the NOAA National Air Quality Forecast Capability (NAQFC) using in-situ aircraft and satellite measurements from the CalNex2010 campaign

Atmospheric ammonia (NH3) is not only a major precursor gas for fine particulate matter (PM2.5), but it also negatively impacts the environment through eutrophication and acidification. As the need for agriculture, the largest contributing source of NH3, increases, NH3 emissions will also increase. Therefore, it is crucial to accurately predict ammonia concentrations. The objective of this study is to determine how well the U.S. National Oceanic and Atmospheric Administration (NOAA) National Air Quality Forecast Capability (NAQFC) system predicts ammonia concentrations using their Community Multiscale Air Quality (CMAQ) model (v4.6). Model predictions of atmospheric ammonia are compared against measurements taken during the NOAA California Nexus (CalNex) field campaign that took place between May and July of 2010. Additionally, the model predictions were also compared against ammonia measurements obtained from the Tropospheric Emission Spectrometer (TES) on the Aura satellite. The results of this study showed that the CMAQ model tended to under predict concentrations of NH3. When comparing the CMAQ model with the CalNex measurements, the model under predicted NH3 by a factor of 2.4 (NMB = −58%). However, the ratio of the median measured NH3 concentration to the median of the modeled NH3 concentration was 0.8. When compared with the TES measurements, the model under predicted concentrations of NH3 by a factor of 4.5 (NMB = −77%), with a ratio of the median retrieved NH3 concentration to the median of the modeled NH3 concentration of 3.1. Because the model was the least accurate over agricultural regions, it is likely that the major source of error lies within the agricultural emissions in the National Emissions Inventory. In addition to this, the lack of the use of bidirectional exchange of NH3 in the model could also contribute to the observed bias.

NAQFC Developmental Forecast Guidance for Fine Particulate Matter (PM2.5)

Abstract The National Air Quality Forecasting Capability (NAQFC) upgraded its modeling system that provides developmental numerical predictions of particulate matter smaller than 2.5 μm in diameter (PM2.5) in January 2015. The issuance of PM2.5 forecast guidance has become more punctual and reliable because developmental PM2.5 predictions are provided from the same system that produces operational ozone predictions on the National Centers for Environmental Prediction (NCEP) supercomputers. There were three major upgrades in January 2015: 1) incorporation of real-time intermittent sources for particles emitted from wildfires and windblown dust originating within the NAQFC domain, 2) suppression of fugitive dust emissions from snow- and/or ice-covered terrain, and 3) a shorter life cycle for organic nitrate in the gaseous-phase chemical mechanism. In May 2015 a further upgrade for emission sources was included using the U.S. Environmental Protection Agency’s (EPA) 2011 National Emission Inventory (NEI). Emissions for ocean-going ships and on-road mobile sources will continue to rely on NEI 2005. Incremental tests and evaluations of these upgrades were performed over multiple seasons. They were verified against the EPA’s AIRNow surface monitoring network for air pollutants. Impacts of the three upgrades on the prediction of surface PM2.5 concentrations show large regional variability: the inclusion of windblown dust emissions in May 2014 improved PM2.5 predictions over the western states and the suppression of fugitive dust in January 2015 reduced PM2.5 bias by 52%, from 6.5 to 3.1 μg m−3 against a monthly average of 9.4 μg m−3 for the north-central United States.

Evaluating ammonia (NH3) predictions in the NOAA National Air Quality Forecast Capability (NAQFC) using in situ aircraft, ground-level, and satellite measurements from the DISCOVER-AQ Colorado campaign

The U.S. National Oceanic and Atmospheric Administration (NOAA) is responsible for forecasting elevated levels of air pollution within the National Air Quality Forecast Capability (NAQFC). The current research uses measurements gathered in the DISCOVER-AQ Colorado field campaign and the concurrent Front Range Air Pollution and Photochemistry Experiment (FRAPPE) to test performance of the NAQFC CMAQ modeling framework for predicting NH3. The DISCOVER-AQ and FRAPPE field campaigns were carried out in July and August 2014 in Northeast Colorado. Model predictions are compared with measurements of NH3 gas concentrations and the NH4+ component of fine particulate matter concentrations measured directly by the aircraft in flight. We also compare CMAQ predictions with NH3 measurements from ground-based monitors within the DISCOVER-AQ Colorado geographic domain, and from the Tropospheric Emission Spectrometer (TES) on the Aura satellite.In situ aircraft measurements carried out in July and August of 2014 suggest that the NAQFC CMAQ model underestimated the NH3 concentration in Northeastern Colorado by a factor of ∼2.7 (NMB = −63%). Ground-level monitors also produced a similar result. Average satellite-retrieved NH3 levels also exceeded model predictions by a factor of 1.5–4.2 (NMB = −33 to −76%). The underestimation of NH3 was not accompanied by an underestimation of particulate NH4+, which is further controlled by factors including acid availability, removal rate, and gas-particle partition. The average measured concentration of NH4+ was close to the average predication (NMB = +18%).Seasonal patterns measured at an AMoN site in the region suggest that the underestimation of NH3 is not due to the seasonal allocation of emissions, but to the overall annual emissions estimate. The underestimation of NH3 varied across the study domain, with the largest differences occurring in a region of intensive agriculture near Greeley, Colorado, and in the vicinity of Denver. The NAQFC modeling framework did not include a recently developed bidirectional flux algorithm for NH3, which has shown to considerably improve NH3 modeling in agricultural regions. The bidirectional flux algorithm, however, is not expected to obtain the magnitude of this increase sufficient to overcome the underestimation of NH3 found in this study. Our results suggest that further improvement of the emission inventories and modeling approaches are required to reduce the bias in NAQFC NH3 modeling predictions.

Toward enhanced capability for detecting and predicting dust events in the western United States: the Arizona case study

Abstract. Dust aerosols affect human life, ecosystems, atmospheric chemistry and climate in various aspects. Some studies have revealed intensified dust activity in the western US during the past decades despite the weaker dust activity in non-US regions. It is important to extend the historical dust records, to better understand their temporal changes, and to use such information to improve the daily dust forecasting skill as well as the projection of future dust activity under the changing climate. This study develops dust records in Arizona in 2005–2013 using multiple observation data sets, including in situ measurements at the surface Air Quality System (AQS) and Interagency Monitoring of Protected Visual Environments (IMPROVE) sites, and level 2 deep blue aerosol product by the Moderate Resolution Imaging Spectroradiometer. The diurnal and inter-annual variability of identified dust events are shown related to observed weather patterns (e.g., wind and soil moisture) and surface conditions (e.g., land cover type and vegetation conditions), suggesting a potential for use of satellite soil moisture and land products to help interpret and predict dust activity. Backtrajectories computed using NOAA's Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model indicate that the Sonoran and Chihuahuan deserts are important dust source regions during identified dust events in Phoenix, Arizona. Finally, we assess the impact of a recent strong dust event on western US air quality, using various observational and modeling data sets, during a period with a stratospheric ozone intrusion event. The capability of the current US National Air Quality Forecasting Capability (NAQFC) Community Multi-scale Air Quality (CMAQ) modeling system to represent the magnitude and the temporal variability of aerosol concentrations is evaluated for this event. Directions for integrating observations to further improve dust emission modeling in CMAQ are also suggested.

Evaluation of modeled surface ozone biases as a function of cloud cover fraction

Abstract. A regional air-quality forecast system's model of surface ozone variability based on cloud coverage is evaluated using satellite-observed cloud fraction (CF) information and a surface air-quality monitoring system. We compared CF and daily maximum ozone from the National Oceanic and Atmospheric Administration's National Air Quality Forecast Capability (NOAA NAQFC) with CFs from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the US Environmental Protection Agency's AirNow surface ozone measurements during May to October 2014. We found that observed surface ozone shows a negative correlation with the MODIS CFs, showing around 1 ppb decrease for 10 % MODIS CF change over the contiguous United States, while the correlation of modeled surface ozone with the model CFs is much weaker, showing only −0.5 ppb per 10 % NAQFC CF change. Further, daytime CF differences between MODIS and NAQFC are correlated with modeled surface-ozone biases between AirNow and NAQFC, showing −1.05 ppb per 10 % CF change, implying that spatial and temporal misplacement of the modeled cloud field might have biased modeled surface ozone level. Current NAQFC cloud fields seem to have fewer CFs compared to MODIS cloud fields (mean NAQFC CF = 0.38 and mean MODIS CF = 0.55), contributing up to 35 % of surface-ozone bias in the current NAQFC system.