Naphthalene Precursors Research Articles

Ultrafine Particulate Matter in Methane-Air Premixed Flames With Oxygen Enrichment

A complementary computational and experimental study is carried out on the formation of ultrafine particulate matter in premixed laminar methane air flames. Specifically, soot formation is examined in premixed stretch-stabilized flames to observe soot inception and growth at relatively high flame temperatures common to oxygen enriched applications. Particle size distribution functions (PSDF) measured by mobility sizing show clear trends as the equivalence ratio increases from Φ = 2.2 to Φ = 2.4. For a given equivalence ratio, the measured distribution decreases in median mobility particle size as the maximum flame temperature increases from approximately 1,950–2,050 K. The median mobility particle size is 20 nm or less for all flame conditions studied. The volume fraction decreases with increasing flame temperature for all equivalence ratio conditions. The Φ = 2.2 condition is close to the soot inception limit and both number density and volume fraction decrease monotonically with increasing flame temperature. The higher equivalence ratio conditions show a peak in number density at 2,000 K which may indicate competing soot inception processes are optimized at this temperature. Flame structure computations are carried out using detailed gas-phase combustion chemistry of the Appel, Bockhorn, Frenklach (ABF) model to examine the connection of the observed PSDF to soot precursor chemistry. Agreement between measured and computed flame standoff distances indicates that the ABF model could provide a reasonable prediction of the flame temperature and soot precursor formation for the flames currently studied. To the first order, the trends observed in the measured PSDF could be understood in terms of computed trends for the formation of benzene, naphthalene and other soot precursors. Results of the current study inform particulate matter behavior for methane and natural gas combustion applications at elevated temperature and oxygen enriched conditions.

Synthesis and Molecular Properties of Partially Fluorinated DNTTs**

Abstract1,2,3,4‐Tetrafluoro‐dinaphthothienothiophene (F4DNTT) and 1,2,3,4,8,9,10,11‐octafluoro‐dinaphthothienothiophene (F8DNTT) were synthesized via bisthiomethyl alkene intermediates which were accessible by McMurry coupling or Wittig olefination of partially fluorinated naphthalene precursors. DFT‐based electronic structure calculations, near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy, and UV/Vis measurements were used for HOMO/LUMO gap determination and to analyze the electronic structures of the partially fluorinated DNTTs. Reduced exciton binding was observed in thin films.

Theoretical Study of the Reaction Mechanism and Kinetics of the Phenyl + Allyl and Related Benzyl + Vinyl Associations.

Potential energy surfaces for the allyl + phenyl and benzyl + vinyl barrierless radical association reactions have been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory. Variable reaction coordinate transition state theory (VRC-TST) has been employed to evaluate high-pressure limit rate constants for the barrierless channels. Then, Rice-Ramsperger-Kassel-Marcus master equation (RRKM-ME) calculations have been performed to assess phenomenological rate constants and product branching ratios of various reaction channels at different temperatures and pressures. The initial step of both radical association reactions produces 3-phenylpropene which can further dissociate into a variety of bimolecular products including the indene precursor 1-phenylallyl + H. The results showed that at typical combustion conditions the collisional stabilization of 3-phenylpropene dominates both the phenyl + allyl and benzyl + vinyl reactions at temperatures below 1000 K and remains important at high pressures up to 2500 K. The main bimolecular products of the two reactions at high temperatures are predicted to be benzyl + vinyl and phenyl + allyl, respectively. The well-skipping mechanism to form 1-phenylallyl directly in the allyl + phenyl and benzyl + vinyl reactions appeared to be not significant, however, the reactions can provide some contributions into the formation of the indene precursor via the 3-phenylpropene stabilization/dissociation sequence and most of all, via the formation of 3-phenylpropene itself, which then can undergo H-abstraction by available radicals to produce 1-phenylallyl. The allyl + phenyl reaction can also contribute to the formation of two-ring PAH by producing benzyl radical at high temperatures, either by the well-skipping or stabilization/dissociation mechanisms; in turn, benzyl can readily react with acetylene or propargyl radical to form indene or naphthalene precursors, respectively. Rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

Dynamics of flow–soot interaction in wrinkled non-premixed ethylene–air flames

A two-dimensional simulation of a non-premixed ethylene–air flame was conducted by employing a detailed gas-phase reaction mechanism considering polycyclic aromatic hydrocarbons, an aerosol-dynamics-based soot model using a method of moments with interpolative closure, and a grey gas and soot radiation model using the discrete transfer method. Interaction of the sooting flame with a prescribed decaying random velocity field was investigated, with a primary interest in the effects of velocity fluctuations on the flame structure and the associated soot formation process for a fuel-strip configuration and a composition with mature soot growth. The temporally evolving simulation revealed a multi-layered soot formation process within the flame, at a level of detail not properly described by previous studies based on simplified soot models utilizing acetylene or naphthalene precursors for initial soot inception. The overall effect of the flame topology on the soot formation was found to be consistent with previous experimental studies, while a unique behaviour of localised strong oxidation was also noted. The imposed velocity fluctuations led to an increase of the scalar dissipation rate in the sooting zone, causing a net suppression in the soot production rate. Considering the complex structure of the soot formation layer, the effects of the imposed fluctuations vary depending on the individual soot reactions. For the conditions under study, the soot oxidation reaction was identified as the most sensitive to the fluctuations and was mainly responsible for the local suppression of the net soot production.

ChemInform Abstract: Synthesis of Naphthalene and Indene Precursors to Naphthoic and Indenoic Acids.

Abstract As part of ongoing research to investigate structural requirements for lactate dehydrogenase inhibition by highly substituted naphthoic and indenoic acids, certain naphthalene and indene precursors to those types of compounds are required. Described here are efficient preparations of 1-naphthoic acid precursors 6-benzyl-2,3-dimethoxy-1-propylnaphthalenes, including compounds with substituted benzyl groups and 7-benzyl-2,3-dimethoxy-1-propylnaphthalene. Also described are the syntheses of indenoic acid precursors 2-benzyl-5,6-dimethoxy-7-propyl-1 H -indenes, including compounds with substituted benzyl groups. These compounds were made from the key intermediates 6,7-dimethoxy-5-propyl-1-tetralone, 6,7-dimethoxy-8-propyl-1-tetralone, and 5,6-dimethoxy-4-propyl-1-indanone.

Iodocyclization of Diallyl-Dihydroxy Naphthalenes Using <i>N</i>-Iodosuccinimide vs Molecular Iodine in Aqueous Micelle

A number of doubly-fused [1,2] naphthodifurans have been synthesized from the corresponding diallyl-dihydroxy naphthalene precursors involving N-iodosuccinimide in acetonitrile and also by molecular iodine in aqueous micelle using CTAB as surfactant. The electrophilic cyclization occurs regioselectively by a 5-exo-trig mode of cyclization.

Regioselective 5-exo-Trig Heterocyclization of 2-Allyl-1-naphthols under the Influence of N-Iodosuccinimide or Molecular Iodine in Aqueous Micelle

Regioselective iodocyclization of a series of allylhydroxy naphthalene precursors involving N-iodosuccinimide and environment friendly green approach associated with surfactant-promoted molecular-iodine-mediated 5-exo-trig cyclization strategies has been explored.

Base‐ and Light‐Assisted Synthesis of Anthracenes from 3‐Allylnaphthalene‐2‐carbaldehydes.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Base- and light-assisted synthesis of anthracenes from 3-allylnaphthalene-2-carbaldehydes

The synthesis of substituted anthracenes from naphthalene precursors is described. The key step involved heating ortho-allyl substituted naphthalene-2-carbaldehydes and potassium t-butoxide in DMF with concomitant irradiation from a high pressure mercury lamp to afford anthracenes in yields of 76–98%.

Synthesis, Chemical Properties, and Preliminary Evaluation of Substituted CBI Analogs of CC-1065 and the Duocarmycins Incorporating the 7-Cyano-1,2,9,9a-tetrahydrocyclopropa[c]benz[e]indol-4-one Alkylation Subunit: Hammett Quantitation of the Magnitude of Electronic Effects on Functional Reactivity

The synthesis of 7-cyano-1,2,9,9a-tetrahydrocyclopropa[c]benz[e]indol-4-one (CCBI), a substituted CBI derivative bearing a C7 cyano group, is described in efforts that establish the magnitude of potential electronic effects on the functional reactivity of the agents. The CCBI alkylation subunit was prepared by a modified Stobbe condensation/Friedel−Crafts acylation for generation of the appropriately functionalized naphthalene precursors followed by 5-exo-trig aryl radical−alkene cyclization for synthesis of the 1,2-dihydro-3H-benz[e]indole skeleton and final Ar-3‘ alkylation for introduction of the activated cyclopropane. The most concise approach provided the CCBI subunit and its immediate precursor in 14−15 steps in superb overall conversions (15−20%). Resolution of an immediate CCBI precursor and its incorporation into both enantiomers of 34−39, analogs of CC-1065 and the duocarmycins, are detailed. A study of the solvolysis reactivity and regioselectivity of N-BOC-CCBI (25) revealed that introduction of the C7 nitrile slowed the rate of solvolysis but only to a surprisingly small extent. Classical Hammett quantitation of the effect provided a remarkably small ρ (−0.3), indicating an exceptionally small C7 substituent electronic effect on functional reactivity. Additional kinetic studies of acid-catalyzed nucleophilic addition proved inconsistent with C4 carbonyl protonation as the slow and rate-determining step but consistent with a mechanism in which protonation is rapid and reversible followed by slow and rate-determining nucleophilic addition to the cyclopropane requiring both the presence and assistance of a nucleophile (SN2 mechanism). No doubt this contributes to the DNA alkylation selectivity of this class of agents and suggests that the positioning of an accessible nucleophile (adenine N3) and not C4 carbonyl protonation is the rate-determining step controlling the sequence selectivity of the DNA alkylation reaction. This small electronic effect on the solvolysis rate had no impact on the solvolysis regioselectivity, and stereoelectronically-controlled nucleophilic addition to the least substituted carbon of the activated cyclopropane was observed exclusively. Consistent with past studies, a direct relationship between solvolysis stability and cytotoxic potency was observed with the CCBI-derived agents providing the most potent analogs in the CBI series, and these observations were related to the predictable Hammett substituent effects. For the natural enantiomers, this unusually small electronic effect on functional reactivity had no perceptible effect on their DNA alkylation selectivity. Similar effects of the C7 cyano substituent on the unnatural enantiomers were observed, and they proved to be 4−10× more effective than the corresponding CBI-based unnatural enantiomers and 4−70× less potent than the CCBI natural enantiomers.

Synthesis and Properties of Substituted CBI Analogs of CC-1065 and the Duocarmycins Incorporating the 7-Methoxy-1,2,9,9a-tetrahydrocyclopropa[c]benz[e]indol-4-one (MCBI) Alkylation Subunit: Magnitude of Electronic Effects on the Functional Reactivity.

The synthesis of 7-methoxy-1,2,9,9a-tetrahydrocyclopropa[c]benz[e]indol-4-one (MCBI), a substituted CBI derivative bearing a C7 methoxy group para to the C4 carbonyl, is described in efforts that establish the magnitude of potential electronic effects on the chemical and functional reactivity of the agents. The core structure of the MCBI alkylation subunit was prepared by a modified Stobbe condensation/Friedel-Crafts acylation for generation of the appropriately functionalized naphthalene precursors (15 and 20) followed by 5-exo-trig aryl radical-alkene cyclization (24 --> 25, 32 --> 33) for completion of the synthesis of the 1,2-dihydro-3H-benz[e]indole skeleton and final Ar-3' alkylation of 28 for introduction of the activated cyclopropane. Two approaches to the implementation of the key 5-exo-trig free radical cyclization are detailed with the former proceeding with closure of 24 to provide 25 in which the required product functionalization was introduced prior to cyclization and the latter with Tempo trap of the cyclization product of the unfunctionalized alkene substrate 32 to provide 33. The latter concise approach provided the MCBI subunit and its immediate precursor in 12-13 steps in superb overall conversions (27-30%). Resolution of an immediate MCBI precursor and its incorporation into both enantiomers of 39-46, analogs of CC-1065 and the duocarmycins, are detailed. A study of the solvolysis reactivity and regioselectivity of N-BOC-MCBI (29) revealed that introduction of the C7 methoxy group accelerates the rate of solvolysis by only 1.2-1.06x. This remarkably modest effect is inconsistent with C4 carbonyl protonation as the slow and rate-determining step of solvolysis or acid-catalyzed nucleophilic addition but is consistent with a mechanism in which protonation is rapid and reversible followed by slow and rate-determining nucleophilic addition to the cyclopropane requiring both the presence and assistance of a nucleophile (S(N)2 mechanism). No doubt this contributes to the DNA alkylation selectivity of this class of agents and suggests that the positioning of an accessible nucleophile (adenine N3) and not C4 carbonyl protonation is the rate-determining step controlling the sequence selectivity of the DNA alkylation reaction. This small electronic effect on the solvolysis rate had no impact on the solvolysis regioselectivity, and stereoelectronically-controlled nucleophilic addition to the least substituted carbon of the activated cyclopropane was observed exclusively. For the natural enantiomers, this unusually small electronic effect on functional reactivity had little or no perceptible effect on their DNA alkylation selectivity, efficiency, and relative rates or on their biological properties. Perceptible effects of the C7 methoxy substituent on the unnatural enantiomers were observed and they proved to be 4-40x more effective than the corresponding CBI-based unnatural enantiomers and comparable in cytotoxic potency with the MCBI natural enantiomers. This effect is most consistently rationalized not by a C7 methoxy substituent effect on functional reactivity but rather through introduction of additional stabilizing noncovalent interactions which increase the unnatural enantiomer DNA alkylation efficiency and further stabilize its inherently reversible DNA alkylation reaction.