Nanosheet Morphology Research Articles

Three-dimensional allium flower-like iron-cobalt sulfide nanomaterials for high-performance supercapacitors

Supercapacitors with their improved performance in high energy density and long-term cycling stability have been the growing trend in recent years for fulfilling the demand of efficient energy storage systems. Herein, we report morphology-controlled three-dimensional (3D) Allium flower-like bimetallic iron-cobalt sulfide (3D-FeCoS AF) nanomaterials on nickel foam (NF) electrodes using a single-step electrochemical deposition strategy. The self-standing bimetallic 3D-FeCoS AF nanostructures show good performance towards the supercapacitance applications. The 3D-FeCoS AF nanostructures delivered a specific capacitance of ∼375.7 F g−1 at a current density of 1.0 A/g. The possible electron cloud delocalization among the FeS nanostructures through d-bands leads to the lower charge transport resistance at the 3D-FeCoS AF electrode–electrolyte interfaces and improved conductivity. The 3D-FeCoS AF electrode demonstrated excellent specific capacity and rate performance in a 2.0 M KOH electrolyte. Owing to their enormous electrochemical active surface area (ECSA) and distinctive 3D nanosheet morphology, the present 3D-FeCoS electrode holds great potential for the fabrication of additional transition metal sulfide materials for excellent supercapacitor performances. The findings of this study suggest promising prospects for the utilization of these materials in practical supercapacitance applications.

Alkaline Synthesis of Pure Silica ITH Zeolite for Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime.

Pure silica ITH zeolite is normally synthesized under neutral or acidic conditions in the presence of HF, but it is challenging for synthesis of this zeolite under alkaline conditions. In this work, it is successful for alkaline synthesis of pure silica ITH in the absence of HF using a designed organic template containing F species, showing that the sample obtained has high crystallinity associated with ITH structure, nanosheet morphology, and rich silanol nests. Very importantly, this ITH zeolite exhibited better performance in vapor phase Beckmann rearrangement of cyclohexanone oxime than that of Silicalite-1 zeolite, one of the best catalysts for this reaction. This work might offer a new opportunity for preparation of pure silica zeolites as efficient catalysts in the Beckmann rearrangement in the future.

Multifunctional Effect of Carbon Matrix with Sulfur Dopant Inspires Mixed Metal Sulfide as Freestanding Anode in Sodium-Ion Batteries.

As active materials for large-radius Na+ storage, metal sulfide (MS) anodes still face several challenges, including poor intrinsic electric conductivity, severe volume change along with the shuttle and dissolution effects of discharge-produced polysulfides. In this work, the mixed nickel-manganese sulfides (NiMnS) in the morphology of uniform 2D ultrathin nanosheets are derived from layered metal-organic frameworks (MOFs), where the NiS-MnS heterojunction are accommodated in carbon matrix with S dopant (NiMnS/SC). Through experiments and density functional theory (DFT) simulations, it is revealed that the carbon matrix with S dopant has multifunctional effects on active NiMnS during the charge/discharge process, including conductive intermediary, electrochemical active site, physical barrier, and chemical adsorption. This work may promote the design of MS-based electrodes in SIBs and extend the application of carbon material with S dopant in Na-S batteries.

Self-Assembly of Metallo-Supramolecular Amphiphiles based on Azadipyrromethenes: Consecutive Pathways to Nanodiscs and Nanosheets.

A new class of metallo-supramolecular amphiphilic dyes 1 a, b was constructed by using two azadipyrromethene units which were respectively modified with two hydrophobic alkyl and two hydrophilic oligo(ethylene glycol) chains. The spectroscopic and morphological studies revealed the consecutive self-assembly pathways of 1 a in EtOH/H2O mixed solvent. The monomers of 1 a firstly aggregated into the kinetic-controlled, nanodisc-shaped Agg. I upon cooling and the latter spontaneously transformed into the thermodynamically more stable Agg. II with a nanosheet morphology. While the non-fluorescent Agg. I displayed a broad absorption band (λmax=615 nm), the Agg. II displayed a more intensive and narrowed J-band (λmax=693 nm) and a fluorescence band with a maximum at 760 nm (Φfl=0.1), which could be ascribed to the J-aggregation induced emission enhancement. The kinetics of Agg. I to Agg. II transformation was further modulated by seed-initiated supramolecular polymerization with various ratios of Seedagg.II, in which the transformation rate was significantly increased by ca. 2 orders of magnitude compared to the spontaneous process. The supramolecular amphiphile 1 b bearing longer hydrophilic chains formed only one type aggregate, which exhibited spectroscopic and morphological properties that were highly comparable with that of Agg. I.

Highly Efficient and Selective Electrocatalytic Semihydrogenation of Acetylene to Ethylene via Continuous Proton Feeding and Accelerated Transfer on Cu NP/FeNC Composite

AbstractElectrocatalytic hydrogenation of acetylene to ethylene in aqueous electrolytes under ambient conditions faces efficiency and selectivity limitation due to the competitive formation of 1,3‐butadiene and hydrogen. In this study, the development of a copper nanoparticle/FeNC composite catalyst is reported through a simple mechanical grinding approach that demonstrates remarkable performance, achieving a highest ethylene Faradaic efficiency of 97.7% at 180 mA cm−2 and selectivity of 92.6% at 200 mA cm−2. Experimental investigations reveal that Cu atoms serve as the active sites, and the integration of FeNC improves the specific surface area through its 2D nanosheet morphology. Further analysis utilizing in situ Raman measurements coupled with theoretical calculations confirms that FeNC accelerates water dissociation to provide abundant protons and improving their transfer, thereby suppressing 1,3‐butadiene formation and elevating acetylene selectivity. Notably, the integration of FeNC also transforms the desorption of *C2H4 into an exothermic process, further facilitating ethylene production. Overall, this study introduces a simple and innovative preparation approach of composite catalysts for selective ethylene synthesis, expanding the application scope of Cu‐based FeNC materials in various electrocatalytic hydrogenation reactions.

The effect of ultrasonic waves on the structure, morphology, and thermal conductivity of graphene oxide as nanofluids for direct absorption solar collector application

This research aims to explore how ultrasonic waves affect the structure and morphology of graphene oxide (GO) as a nanofluid, influencing its thermal conductivity (TC), stability, and photo-thermal conversion properties. GO was rapidly synthesized under ultrasonic bath irradiation using modified and improved Hummers' methods. Ultrasonic irradiation creates different structural and morphological defects in the GO that depend on the sonication time. The relationship between the exposure time to ultrasound and the creation of structural and morphological defects in graphene oxide nanosheets was investigated using UV–Vis, FTIR, Raman spectroscopies, AFM, and TEM analysis. The study examined how the structure and morphology of graphene oxide nanosheets affect the thermophysical and photo-thermal conversion properties of nanofluids by comparing heat transfer and stability. The simultaneous characterizing of the structure and morphology indicates that TC and stability are related to the sonication time. Indirect sonication with low intensity can carefully control the oxidation reaction of GO. Sonication for 30 min creates GO nanosheets that yield stable nanofluids with a 32.31 % enhancement in TC, with no extra treatment needed. This particular nanofluid has excellent photo-thermal conversion properties thanks to its high optical absorption, good stability, and thermal conductivity. This can increase the solar-thermal conversion efficiency (η) up to 72.5 %, making it a promising candidate for use as the working fluid in direct absorption solar collectors (DASCs)

Fabrication of SnSe nanostructures visible light photodetectors

Tin selenide (SnSe), a potential low-cost material for technological use, possesses good optical, electrical, and optoelectronic properties. In the present study, thermally evaporated SnSe thin films with vertically grown nanosheet morphology are used to fabricate photoconductor-type photodetectors for visible light detection. The as-deposited films at room temperature (RT) are annealed in a vacuum from 100 to 250 °C and are investigated by EDX, XRD, Raman, FE-SEM, and UV–visible spectroscopy. The morphology and crystallinity of films that had been annealed at 200 °C were better, with (111) plane being the preferred orientation. From the optical transmittance measurements, the absorption coefficient and optical bandgap (Eg) of the deposited films were determined. Here, photo-sensing parameters of the detectors fabricated by depositing Ag contact and tested systematically using a 532 nm laser source of varied power intensities (1–5 mW/cm2) are reported. The photodetector’s performances were evaluated, and the fabricated film annealed at 200 °C had a responsivity of 25 × 10−2 AW−1, a peak EQE of 83 %, and an elevated detectivity of 30 × 108 Jones. The response speed of the fabricated photodetector was reasonably good with τr = 3.8 s and τf = 4.4 s under 5 V bias. The research showed the potential SnSe thin films might be used in the field of detecting visible light.

Solvent-mediated synthesis of 2D In-TCPP MOF nanosheets for enhanced photodynamic antibacterial therapy

Two-dimensional (2D) metal-organic frameworks (MOFs) have emerged as promising photosensitizers in photodynamic therapy in recent years. In comparison to bulk MOFs, constructing 2D MOFs can increase the presence of active sites through increasing the surface area ratio. Herein, we report a simple solvent-mediated synthesis method for preparation of 2D porphyrin-based MOF (In-TCPP) nanosheets without the addition of any surfactants as an efficient photosensitizer for enhancing photodynamic antibacterial therapy. The accurate regulation of the morphology and size of 2D In-TCPP nanosheets can be achieved by varying the ratio of water to N,N-dimethylformamide solvent with the appropriate assistance of pyridine. The optimal synthesized 2D In-TCPP nanosheets exhibit a diameter of 70-120 nm and a thickness of 21.5-27.4 nm. Promisingly, 2D In-TCPP nanosheets produce a higher amount of 1O2 when exposed to 660 nm laser compared to the In-TCPP bulk, indicating that the smaller nanosheets possess more active sites for reactive oxygen species generation and can greatly improve the antibacterial photodynamic therapeutic effect. Both the in vitro and in vivo results prove that the In-TCPP nanosheets can be used as a photosensitizer for efficient photodynamic antibacterial therapy to kill S. aureus and promote wound healing.

Structural characteristics of Bi2O2CO3 nanosheets synthesized by nano-pulsed discharges in water

A comprehensive analysis of Bi2O2CO3 nanosheets, which were synthesized using nanosecond-pulsed discharges in water between bismuth electrodes, was conducted in order to investigate the crystallographic features of this material. Electron diffraction, X-ray diffraction and electron energy-loss spectrometry techniques revealed the presence of a stoichiometric tetragonal Bi2O2CO3 structure, labelled BOC in this study. It crystallizes in the body-centred tetragonal Bravais lattice and belongs to the I4/mmm space group (No. 139), with the following lattice parameters: a = 3.91, c = 13.77 Å. The nanosheets adopt square shapes. This shape is dictated by the symmetry elements of its point group (4/mmm) under the prevailing local conditions. From the energetic point of view, this shape, dictated by the 4/m2/m2/m point group and therefore a pinacoid, corresponds to an absolute extremum, an indicator of the stability of these BOC nanosheets. Most nanosheets are crossed by equal-inclination fringes or bend contours. These bend contours reflect the fact that the BOC nanosheets contain crystal defects and/or are so thin that they bend elastically, leading to rotation of the lattice planes towards the diffracting Bragg position. The diffraction patterns corresponding to bend contours intersecting along the [001] zone axis have been studied in detail. Extra reflections are superimposed on the diffraction pattern of the BOC crystallographic structure. These extra reflections are essentially attributed to two phenomena: multiple diffraction and local disorder–order transformations of the BOC crystal structure, passing from a body-centred tetragonal to a primitive Bravais lattice. A mechanism related to the ledge mechanism (kinks and jogs), explaining the formation of nanosheets in a metallic matrix, has been adapted and proposed for the formation of BOC nanosheets in water. When the nanosheets are removed from the water, they become carbonated once in the air, leading to the formation of BOC that inherits the nanosheet morphology.

Observation of voltage dependent negative differential resistance (NDR) in SnS2-GO nanocomposites

This study investigates the structural, optical, and electrical properties of tin disulfide (SnS2) and SnS2-graphene oxide (GO) nanosheets synthesized via chemical bath deposition method (CBD). Structural characterization confirms the formation of hexagonal crystal phases with nanosheet morphology. It shows a well distribution of nanosheet average square sizes of 10 nm for SnS2 and 6 nm for SnS2-GO. Optical analysis shows blue shifts in absorption edges compared to bulk SnS2, attributed to quantum confinement effects. Photoluminescence emission peaks exhibit different energy levels in SnS2-GO originated to native defects. The composites show a sharp reduced of PL intensity due to enhanced charge carrier separation. Electrical measurements on SnS2-GO thin films demonstrate negative differential resistance (NDR) behavior in both planar and sandwich contact configurations, suggesting electron injection/extraction mechanisms. The NDR phenomenon exhibits a dependence on voltage scan rate, indicating the involvement of electronic and ionic elements in charge transport mechanisms. Overall, this study provides insights into the NDR properties of SnS2-GO nanocomposite, laying the groundwork for their potential applications in optoelectronics and nanoelectronics.

Confined interfacial self-assembly of graphene-like carbon/MXene composite electrodes for capacitive deionization

Electrodes that have high desalting capacity, fast desalting rates and stable desalination performance are needed in capacitive deionization (CDI) technologies for water security. Herein, confined interfacial self-assembly of lignin-based graphene-like carbon (GC) precursors in Ti3C2-MXene interlayers was developed for forming GC/MXene composites. The formation of GC was generated in-situ by KHCO3-assisted pyrolytic carbonization which leads to exfoliation of multilayered MXene thereby forming GC/MXene heterostructures having strong interfacial interactions. GC/MXene exhibited tremella-like nanosheets morphology, accompanied by the formation of a TiO2 phase at the interface of GC and MXene hybridization, which confirmed formation of a heterostructure. Crystallographic phase identification of GC/MXene showed the exfoliation of MXene. GC/MXene had an ultra-negative surface charge of −39.3 mV, making it favorable for application as a cathode for Na+ removal. The GC/MXene heterostructure had high desalting capacity (54.2 mg g−1), high desalting rate (2.7 mg g−1 min−1), and stable cycling performance (90 % SAC retention after 30 cycles). The interfacial self-assembly strategy developed in this work is expected to enable green synthesis routes for graphene/MXene-based composite materials that allow construction of 2D/2D heterostructures for multilayer MXene and their analogues.

Lignocellulosic materials extraction from waste baby diaper to prepare light-responsive metal oxide/carbon composite for efficient organic dye pollutant removal

The bimetal oxide comprising nickel incorporated β-Bi2O3 on graphitic carbon in the form of bismuth nickel oxide (BNO@C) was prepared by waste lignocellulosic materials collected from cheap and readily available baby diapers. The prepared BNO@C was used to photocatalytically degrade methylene blue under UV-light irradiation. Prior to the photocatalytic performance analysis, the formation of BNO@C was confirmed by various morphological and structural analysis including SEM, TEM, XRD, and XPS analyses. As a result, the two-dimensional nanosheet morphology and tetragonal primitive lattice-structure with 2+ and 3+ oxidation stated Ni and Bi in BNO@C structural formulation were confirmed. In photocatalysis experimentation examined with BNO@C, the maximum methylene blue removal percentage of 96.7 % was achieved within 16 min. The influence of Ni2+ in BNO@C was identified by performing the photocatalytic performance of bare NiO@C and Bi2O3@C, yielding maximum dye removal of 32.8 % and 64.5 %, respectively. The efficacy of Ni in BNO@C toward increasing catalytic efficiency was identified using DFT analysis, revealing the acting of Ni as active sites for improved light absorption tendency. These findings show a novel strategy to prepare a low-cost BNO@C catalyst with efficient photocatalytic activity, opening a new path for a cost-efficient wastewater treatment approach.

Vanadium-doped FeO/NiS nanosheet arrays: Synergistic heterometal doping and heterostructure design for enhanced oxygen evolution catalysis

The quest for high-performance OER electrocatalysts has been a focal point in the field of energy conversion and storage. Despite the promise shown by nickel sulfide-based materials, the enhancement of their catalytic activity through singular strategies has been found to be inadequate for achieving the desired comprehensive performance improvements. In this context, we introduce a novel V-doped FeO/NiS nanosheet array (V-FeO/NiS/NF) synthesized through a synergistic approach involving heteroatom doping and heterostructure engineering. This advanced material exhibits structural integrity, a three-dimensional nanosheet morphology, and superior electrical conductivity, which collectively contribute to its exceptional electrochemical performance. The V-FeO/NiS/NF electrode can reach a current density of 10 mA cm−2 with an impressively low overpotential of 213 mV and sustains its activity for an extended period of 196 hours, surpassing the stability and efficiency of many electrodes. Theoretical insights reveal that vanadium doping significantly lowers the adsorption free energy of key reaction intermediates, thereby facilitating the OER process. This study not only presents a robust and efficient OER electrocatalyst but also paves the way for the design of advanced, cost-effective nickel-based sulfide catalysts through strategic heteroatom incorporation and structural optimization.

Ti3+ self-doped TiO2 nanoparticles immobilized on self-pillared pentasil zeolite nanosheets: An efficient visible-light-driven degradation photocatalyst

Ti3+ defective TiO2 nanoparticles (TiO2-NPs) were synthesized through slow hydrolyzation of tetrabutyl titanate and low-temperature annealing, followed by loading on self-pillared pentasil (SPP) zeolite nanosheets to construct a TiO2/zeolite hybrid composite by solid-state dispersion. The obtained TiO2-NPs/SPP composite exhibited a distinct red-shift in the UV–vis absorption spectrum and a significantly reduced band gap due to the introduced Ti3+ defects and the consequent oxygen vacancies (VO), leading to an enhanced visible-light responsivity. The diverse porosity and house-of-cards nanosheet morphology of the SPP support not only promoted the efficient loading and stable immobilization of TiO2-NPs nanoparicles through micropore migration and surface adhesion but also endowed the adsorbability to the TiO2-NPs/SPP composite. The adsorptive photodegradation of methylene blue (MB) was used to evaluated the photocatalytic performance of TiO2-NPs/SPP, and a 95.6 % degradation rate of MB was observed after 3 h illumination with visible-light. The adsorptive effect strongly promoted the accessibility of MB molecules to the active TiO2 species, leading to a remarkable enhancement in degradation efficiency. Moreover, a superior recyclability embodied in the retention of 96.4 % photocatalytic activity after three regeneration cycles indicated the TiO2-NPs/SPP composite to be practical for water pollutant degradation.

Self-assembled magnetic particles on hard magnetic materials substrate for simple and rapid SERS detection of organic dye

In this paper, a detection strategy based on Surface-enhanced Raman Scattering (SERS) was proposed to quickly and simply separate target molecules from samples. Fe3O4@SiO2@Ag (FSA) magnetic particles modified with flower-like silver nanosheets were employed for efficient enrichment of target molecules, followed by their self-assembly onto the NdFeB substrate surface in fluid medium. The SERS sensitivity was indirectly adjusted by changing the reaction time to control the morphology of flower-like silver nanosheets on the surface of magnetic particles. SERS experiment showed that the substrate prepared by this detection strategy had high sensitivity, Rhodamine 6G (R6G) could be detected at the concentration of 10−8M and Methylene Blue (MB) could be detected at the concentration of 10−7M, the calculated enhancement factor was 1.34 × 105. In addition, the uniformity of the substrate was evaluated by SERS mapping using 10-6 M R6G, the RSD value of 8.89% was obtained. This detection strategy provides a new idea for simple and rapid SERS detection of organic dye.

Advancing Electrochemical Energy Storage: The Synergistic Impact of Sulfur Nano-Confinement in Hierarchically Porous Jute-Derived Activated Carbon for Enhanced Supercapacitor Performance

The availability of energy is a cornerstone for the modernization, automation, and economic growth of nations. With the rapid depletion of fossil fuels and rising environmental concerns, such as CO2 emissions leading to global warming, there has been an intensified search for alternative, renewable energy sources like solar and wind power. However, their intermittent nature necessitates robust electric energy storage systems for effectively harnessing these resources. Electrochemical energy storage devices, particularly batteries and supercapacitors, have emerged as a focal point of recent research due to their potential to bridge this gap. While supercapacitors are known for their high power density and long cycle life, they typically exhibit limited energy density. Recent advancements have shown that composites combining carbonaceous materials with redox-active nanomaterials can significantly enhance supercapacitors' electrochemical performance. In this context, our research explores the development of hierarchically porous activated carbon nanosheets (JAC) derived from jute, an abundantly available biomass. Using a straightforward pyrolysis process, we have investigated its potential in supercapacitor applications. The prepared JAC, when employed as an electrode material in a symmetric supercapacitor with a glycerol-based bio-electrolyte, demonstrated higher specific capacitance compared to its commercial counterparts. Further innovation was achieved through the introduction of sulfur doping in JAC (S-doped JAC). This novel approach leverages the inherent porous nanosheet morphology of JAC and heteroatom modification to yield exceptional electrochemical performance. Our findings reveal that the S-doped JAC composite, particularly the variant with 25% sublimed sulfur (SJAC-25), significantly outperforms the standard JAC in terms of specific capacitance (230 F/g vs. 130 F/g at 1.0 A/g current density) in a glycerol-KOH bio-based electrolyte. Moreover, a symmetric supercapacitor assembled with SJAC-25 showcased an impressive energy density of 32 Wh/kg at a power density of 500 W/kg, maintaining 28 Wh/kg even at a heightened power density of 2500 W/kg. This demonstrates its capability to retain high energy efficiency under varying power conditions. Additionally, the SJAC-25 based supercapacitor exhibited remarkable durability, with about 94% capacitance retention and 86% Coulombic efficiency after 10,000 charge-discharge cycles. Our research not only highlights the potential of processed bio-waste as a viable material for energy storage but also introduces an advanced, scalable, and straightforward synthesis method. This method could pave the way for the preparation of highly porous and sulfur-doped nanoporous carbon, setting a new benchmark for high-performance electrochemical energy storage applications.

Experimental and Density Functional Theory Simulation Research on PdO-SnO2 Nanosheet Ethanol Gas Sensors.

Pure SnO2 and 1 at.% PdO-SnO2 materials were prepared using a simple hydrothermal method. The micromorphology and element valence state of the material were characterized using XRD, SEM, TEM, and XPS methods. The SEM results showed that the prepared material had a two-dimensional nanosheet morphology, and the formation of PdO and SnO2 heterostructures was validated through TEM. Due to the influence of the heterojunction, in the XPS test, the energy spectrum peaks of Sn and O in PdO-SnO2 were shifted by 0.2 eV compared with SnO2. The PdO-SnO2 sensor showed improved ethanol sensing performance compared to the pure SnO2 sensor, since it benefited from the large specific surface area of the nanosheet structure, the modulation effect of the PdO-SnO2 heterojunction on resistance, and the catalyst effect of PdO on the adsorption of oxygen. A DFT calculation study of the ethanol adsorption characteristics of the PdO-SnO2 surface was conducted to provide a detailed explanation of the gas-sensing mechanism. PdO was found to improve the reducibility of ethanol, enhance the adsorption of ethanol's methyl group, and increase the number of adsorption sites. A synergistic effect based on the continuous adsorption sites was also deduced.

Amorphous W-doped iron phosphide with superhydrophilic surface to boost water-splitting under large current density

Electrochemical water-splitting is an effective approach for producing hydrogen without producing any pollutants, but its large-scale development is hampered by the lack of low-cost and efficient electrocatalysts. Therefore, it is essential to explore efficient and low-cost non-precious catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, W-doped Fe-P/IF amorphous nanoflake arrays (W-Fe-P/IF) are synthesized by corrosive avenue and following low-temperature phosphorization. Benefiting from the superhydrophilic surface, amorphous structure, nanosheet morphology and abundant active sites, the synthesized catalysts exhibited good catalytic performance. Therefore, the W-Fe-P/IF electrocatalyst onws low overpotentials of 35, 67, and 105 mV to achieve 10 mA cm−2 in 1 M KOH, 1 M KOH + seawater, and 1 M PBS, respectively. In addition, it also exhibits low voltage of 1.63 V to obtain 10 mA cm−2 coupled with excellent stability under 500 mA cm−2. The work provides a new strategy for the preparation of highly-efficient and low-cost non-precious electrocatalysts on renewable energy-related applications.

In-situ construction of ionic liquid salt-derived graphene-like dual-heteroatoms doping engineering as efficient metal-free electrocatalyst for oxygen reduction reaction

Metal-free heteroatom-doped carbon catalysts can effectively eliminate the degradation and pollution problems caused by metal dissolution. However, single heteroatom doping often restricts the regulation of geometric and electronic structures for oxygen reduction reaction (ORR) electrocatalysts. Herein, a dual atomic doping engineering to optimize the electronic structure and local coordination environment of ionic liquid salt-derived graphene-like host material as an efficient metal-free electrocatalyst for ORR. The resultant PNG catalyst with a typical nanosheets morphology with a high specific surface area and unique hierarchical porous structure. Benefiting from the uniform doping of P, N heteroatoms, graphene-like structure, optimized electronic structure and coordination environment, thus-prepared PNG-2 exhibits outstanding ORR activity, which the onset potential and half-potential are negatively shifted by around 70 mV and 46 mV, respectively, as compared to the commercial Pt/C (20 wt.%) for ORR. Furthermore, the PNG-2 exhibits the higher diffusion limiting current density, superior long-term stability as well as excellent resistance to methanol oxidation than Pt/C. Experimental studies and density functional theory (DFT) calculations reveal that the enhanced chemisorption of oxygen species (*OOH, *O and *OH) onto the P and N sites of the PNG catalysts can effectively accelerate the charge transfer kinetics and promote a favorable ORR performance.

Synthesis of CuO nanosheets on Cu foil via one-step wet chemical process at different reaction temperatures and their photoelectrochemical performance

Cupric oxide (CuO) nanostructures were directly grown on copper substrate via a simple one step solution-immersion process. The films were formed by the direct oxidation of copper in aqueous solution containing sodium hydroxide (NaOH) and ammonium persulfate (NH4)2S2O8. The influence of the reaction temperature on the structural, morphological, optical and photoelectrochemical (PEC) properties of the formed copper compounds nanostructures was investigated. The XRD and Raman spectroscopy results revealed the formation of Cu(OH)2/CuO composite for the samples prepared at 3 and 25 °C, and pure CuO was obtained for the samples prepared at 45 and 55 °C. The SEM micrographs showed that the formed Cu(OH)2 and CuO present a nanowire bundles and nanosheet morphology, respectively. The increase of the reaction temperature enhanced the absorbance of the CuO samples in the entire visible region. According to the photoelectrochemical measurements, the increase of the reaction temperature resulted in an improvement of the PEC response. The CuO nanosheets synthesized at 55 °C presents the highest and the most stable PEC response. A reasonable mechanism describing the formation of nanostructured copper compounds at different reaction temperatures is discussed in this paper.