Nanoporous Membranes Research Articles

Integration of 2D Nanoporous Membranes in Microfluidic Devices

Integration of 2D Nanoporous Membranes in Microfluidic Devices

Effect of Organic Cation Adsorption on Ion-Transport Selectivity in a Cation-Permselective Nanopore Membrane.

A key knowledge gap in the emerging field of nanofluidics concerns how the ionic composition and ion-transport properties of a nanoconfined solution differ from those of a contacting bulk solution. We and others have been using potentiometric concentration cells, where a nanopore or nanotube membrane separates salt solutions of differing concentrations to explore this issue. The membranes studied contained a fixed pore/tube wall anionic charge, which ideally would prohibit anions and salt from entering the pore/tube-confined solution. We have been investigating experimental conditions that allow for this ideally permselective cation state to be achieved. Results of potentiometric investigations of a polymeric nanopore membrane (10 ± 2 nm-diameter pores) with anionic charge due to carbonate are presented here. While studies of this type have been reported using alkaline metal and alkaline earth cations, there have been no analogous studies using organic cations. This paper uses a homologous series of tetraalkylammonium ions to address this knowledge gap. The key result is that, in contrast to the inorganic cations, the ideal cation-permselective state could not be obtained under any experimental conditions for the organic cations. We propose that this is because these hydrophobic cations adsorb onto the polymeric pore walls. This makes ideality impossible because each adsorbed alkylammonium must bring a charge-balancing anion, Cl-, with it into the nanopore solution. The alkylammonium adsorption that occurred was confirmed and quantified by using surface contact angle measurements.

Characterization of electrokinetic and membrane properties of nanoporous polyimide films via measurements of time-resolved pressure-induced potential

Charged nanoporous films have interesting ion-separation properties essentially controlled by pore-surface charge density. This (or a related zeta-potential) is often estimated from the so-called streaming potential. However, with nanoporous membranes in sufficiently dilute electrolyte solutions, the pressure-induced electrical response is due not only to streaming potential but also to an electrical response to concentration gradients arising because of a partial salt rejection by charged nanopores. In this study, we refine the methodology of interpretation of measurements of transient filtration potential developed by us previously and apply it to the determination of electrokinetic and membrane properties (in particular, diffusion permeance) of nanoporous polyimide films developed for uses as battery/supercapacitor separators. Diffusion permeance is directly related to electrical conductance, which is an important property of battery/supercapacitor separators.We observe that in dilute electrolyte solutions (<2 mM KCl), the electrical response to an applied pressure difference is dominated by the concentration potential and not by the classical streaming potential contrary to what is often tacitly assumed. The development of concentration gradients across and around the film takes some time, which enables separate determination of instantaneous (streaming potential) and time-delayed (concentration potential) components. An improved interpretation procedure developed in this study enables estimates of impact of non-linear and osmotic corrections and makes the interpretation more reliable. The results of this study are important for the identification and optimization of novel innovative applications for nanoporous films.

Impact of Confinement and Zwitterionic Ligand Chemistry on Ion-Ion Selectivity of Functionalized Nanopores.

Membranes incorporating zwitterionic chemistries have recently emerged as promising candidates for facilitating challenging ion-ion separations. Transport of ions in such membranes predominantly occurs in hydrated nanopores lined with zwitterionic monomers. To shed light on the physics of ion-ion selectivity underlying such materials, we conducted molecular dynamics simulations of sodium halide transport in model nanopores grafted with sulfobetaine methacrylate molecules. Our results reveal that in both functionalized and unfunctionalized nanopores smaller ions prefer to reside near the pore center, while the larger ions tend to reside near the pore walls. An enhancement in the selective transport of larger anions is observed within the unfunctionalized nanopores relative to that in salt-in-water solutions. Upon functionalization of the nanopores with zwitterions (ZIs), the disparities in the anionic distribution profiles within the pores coupled with differences in the anion-ZI interactions result in a slowdown of larger anions relative to smaller anions. Increasing the ZI grafting density exacerbates these effects, further promoting the selective transport of smaller anions. Our results suggest that selectivity toward large anions can be realized by using nanoporous membranes with ZI content that is high enough to facilitate ion/water partitioning into the pores while preserving the characteristic tendency of the unfunctionalized pores to facilitate faster transport of the larger anions. On the other hand, selectivity toward smaller anions can be achieved by targeting ZI content within the pores that is high enough to significantly slow down the transport of large anions but not high enough to hinder the partitioning of ions/water molecules into the pore due to steric effects.

Water desalination across nanoporous Ti3C2 MXene

Nanostructured materials have a modest thickness, which is comparable in scale to the chemical substances to be separated making them highly efficient in membrane-based separation applications. We performed a molecular dynamics simulation to investigate the effect of the functionalization of the nanoporous Ti3C2 MXene membrane on desalination efficiency. Hydrogenated (–H) and hydroxylated (–OH) pores are the two configurations that we looked at. The calculated water permeability, in the case of hydroxylated (–OH) groups linked to carbon atoms, is equal to 100 L.m−2.h−1.bar−1, and the salt rejection is equal to 100 %.

3D-Continuous Nanoporous Covalent Framework Membrane Nanoreactors with Quantitatively Loaded Ultrafine Pd Nanocatalysts.

The confinement effect of catalytic nanoreactors containing metal catalysts within nanometer-sized volumes has attracted significant attention for their potential to enhance reaction rate and selectivity. Nevertheless, unregulated catalyst loading, aggregation, leaching, and limited reusability remain obstacles to achieving an efficient nanoreactor. A robust and durable catalytic membrane nanoreactor prepared by incorporating palladium nanocatalysts within a 3D-continuous nanoporous covalent framework membrane is presented. The reduction of palladium precursor occurs on the pore surface within 3D nanochannels, producing ultrafine palladium nanoparticles (Pd NPs) with their number density adjustable by varying metal precursor concentrations. The precise catalyst loading enables controlling the catalytic activity of the reactor while preventing excess metal usage. The facile preparation of Pd NP-loaded free-standing membrane materials allows hydrodechlorination in both batch and continuous flow modes. In batch mode, the catalytic activity is proportional to the loaded Pd amount and membrane area, while the membrane retains its activity upon repeated use. In continuous mode, the conversion remains above 95% for over 100h, with the reactant solution passing through a single 50µm-thick Pd-loaded membrane. The efficient nanoporous film-type catalytic nanoreactor may find applications in catalytic reactions for small chemical devices as well as in conventional chemistry and processes.

Dehydrated Biomimetic Membranes with Skinlike Structure and Function.

Novel vapor-permeable materials are sought after for applications in protective wear, energy generation, and water treatment. Current impermeable protective materials effectively block harmful agents but trap heat due to poor water vapor transfer. Here we present a new class of materials, vapor permeable dehydrated nanoporous biomimetic membranes (DBMs), based on channel proteins. This application for biomimetic membranes is unexpected as channel proteins and biomimetic membranes were assumed to be unstable under dry conditions. DBMs mimic human skin's structure to offer both high vapor transport and small molecule exclusion under dry conditions. DBMs feature highly organized pores resembling sweat pores in human skin, but at super high densities (>1012 pores/cm2). These DBMs achieved exceptional water vapor transport rates, surpassing commercial breathable fabrics by up to 6.2 times, despite containing >2 orders of magnitude smaller pores (1 nm vs >700 nm). These DBMs effectively excluded model biological agents and harmful chemicals both in liquid and vapor phases, again in contrast with the commercial breathable fabrics. Remarkably, while hydrated biomimetic membranes were highly permeable to liquid water, they exhibited higher water resistances after dehydration at values >38 times that of commercial breathable fabrics. Molecular dynamics simulations support our hypothesis that dehydration induced protein hydrophobicity increases which enhanced DBM performance. DBMs hold promise for various applications, including membrane distillation, dehumidification, and protective barriers for atmospheric water harvesting materials.

Graphene in gas separation membranes—State-of-the-art and potential spoors

Graphene and derivatives have been frequently used to form advanced nanocomposites. A very significant utilization of polymer/graphene nanocomposite was found in the membrane sector. The up-to-date overview essentially highpoints the design, features, and advanced functions of graphene nanocomposite membranes towards gas separations. In this concern, pristine thin layer graphene as well as graphene nanocomposites with poly(dimethyl siloxane), polysulfone, poly(methyl methacrylate), polyimide, and other matrices have been perceived as gas separation membranes. In these membranes, the graphene dispersion and interaction with polymers through applying the appropriate processing techniques have led to optimum porosity, pore sizes, and pore distribution, i.e., suitable for selective separation of gaseous molecules. Consequently, the graphene derived nanocomposites brought about numerous revolutions in high performance gas separation membranes. The structural diversity of polymer/graphene nanocomposites has facilitated the membrane selective separation, permeation, and barrier processes especially in the separation of desired gaseous molecules, ions, and contaminants. Future research on the innovative nanoporous graphene-based membrane can overcome design/performance related challenging factors for technical utilizations.

Dense fluid transport through nanoporous graphene membranes in the limit of steric exclusion

Dense fluid transport through nanoporous graphene membranes in the limit of steric exclusion

Molecular dynamics simulations of the effect of starch on transport of water and ions through graphene nanopores.

We use molecular dynamics simulations to unravel the molecular level mechanisms underlying the structure and dynamics of water and ions flowing through nanoporous starch-graphene membranes. Our findings indicate that there is a significant tendency for the formation of short-range order in close proximity to the graphene membrane surface. This leads to a greater concentration of water and ions, suggesting strong interactions between the membrane and the saltwater solution. Furthermore, we found that the starch-graphene membrane was most efficient in sieving out ions when the starch loading is 15 wt.%, and the pore diameter is 14Å. At these conditions, the starch-graphene membrane showed a high water transport rate and maintained a high level of ion rejection. We investigated the effect of loading of starch and the pore diameter on the pressure-induced transport, structure, and dynamics of Na+, Cl-, and water using the GROMACS 2021.4 package. We further analyze the density profiles of water and ions in the context of ion-polymer and water-polymer interactions and provide mechanistic insights into the piston-induced flow of saltwater through the starch-graphene membranes using Visual Molecular Dynamics (VMD) software.

Nanoporous Ti3C2O2 monolayer towards high permeance and selectivity for CO2/N2 separation: CO2-MXene interaction tuning

MXene, as a new gas separation membrane, has good stability and suitable pore topological structures to mitigate the greenhouse effect caused by excessive CO2 emission. However, the large quadrupole and polarizability of CO2 make it a strong interaction with MXene, thus leading to a strong solubility and weak diffusivity of CO2. Here, we design nanoporous Ti3C2O2 monolayers (YmXn) with exposed C atoms that could tune CO2-Ti3C2O2 interaction so as to improve gas separation performance by density functional theory and molecular dynamics simulation. The scope of “Cut-off” size is obtained by analyzing the gas separation state from un-permeation to permeation. Results reveal that nanoporous Ti3C2O2 membranes achieve both outstanding CO2 selectivity and permeance. The best-performance Y3X3-Ti possesses CO2 permeance of 1.01 × 10-4 and 2.56 × 10-5 mol s−1 m−2 Pa−1 for equimolar gas mixtures and flue gases, respectively, and both the CO2/N2 selectivity reach 100 %. The gas separation mechanism is dominated by diffusion selectivity rather than solution selectivity in nanoporous Ti3C2O2. The dynamic processes of gas permeation, including the center of mass, mean square displacement, and radial distribution function of the gases, are precisely investigated. The electrostatic repulsion between the C atoms in the channel of the membrane and CO2 follows the sequence Y3X3-C > Y2X4 > Y3X3-Ti, which is the key to regulating gas diffusion. Results of this work highlight that tuning gas-membrane interaction and designing “Cut-off” size are effective strategies to achieve excellent CO2 separation performance, and shed new light on the intrinsic mechanism in high-performance gas separation membranes.

Functionalized Ti3C2 MXene nanoporous as a reverse osmosis membrane: Insights from the atomistic level

Two-dimensional materials are highly efficient in membrane-based separation applications because of their small thickness, which is generally of the same order of magnitude as that of the chemical compounds to be separated. MXenes show an important efficiency in the desalination process, and functionalized Ti3C2 pores have not yet been investigated. We performed a molecular dynamics simulation to analyze the effect of pore area and chemical functionalization of the Ti3C2 MXene membrane on reverse osmosis desalination performance. We studied two configurations: hydrogenated (-H) pores and hydroxylated (-OH) pores. Our findings suggest the hydrophobic group (H) pores have the highest water permeability, and the hydrophilic group (OH) has an important salt rejection. The molecular dynamics results show that nanoporous Ti3C2 with an area equal to 100 Ų and a hydrogenated group linked to a carbon atom has the highest water permeability compared to other nanoporous Ti3C2 investigated with a salt rejection of more than 95 % for low pressure. In addition, the nanoporous Ti3C2 MXene membrane can be useful in the process of water desalination.

Mechanical and thermal transport in nanoporous graphene-like BC6N

This work analyzes the thermal transport (TT) and mechanical properties (MP) of nanoporous graphene-like BC6N monolayer utilizing non-equilibrium molecular dynamics (NEMD) and molecular dynamic (MD) simulations. Herein, the heat transfer and mechanical of nanoporous graphene-like BC6N membrane with various circle-pore size defects are systematically reviewed and numerically examined. The results show that the BC6N sheet has a balance on mechanical properties in two directions under biaxial tension as changing pore size from D = 2.0 to D = 7.0 nm. Young's modulus and ultimate strength of BC6N monolayer with a circle pore decrease when the pore size increases. The trending laws are also shown to predict the mechanical parameters of the porous BC6N sheet. Besides, the thermal conductivity (TC) of the monolayer BC6N with a smaller pore size is much higher than that of the sample with a bigger pore size due to higher energy loss. Changing pore size can adjust the TC and 2D temperature distribution around the circle-pore. Furthermore, the pristine BC6N TC is more heightened than the defective ones. The study results confirm that 2D-BC6N has outstanding optical, electronic, thermal transport, and mechanical characteristics. It is particularly inspiring for further experimental and theoretical works that advance different technological applications, such as gas sensors, nanoelectronics, and optoelectronic devices. It helps for real-time monitoring, which is critical to improving safety and efficiency in marine and air transportation infrastructure. Keywords: 2D-BC6N, mechanical, thermal transport, energy.

Fast Fabrication Nanopores on a PMMA Membrane by a Local High Electric Field Controlled Breakdown.

The sensitivity and accuracy of nanopore sensors are severely hindered by the high noise associated with solid-state nanopores. To mitigate this issue, the deposition of organic polymer materials onto silicon nitride (SiNx) membranes has been effective in obtaining low-noise measurements. Nonetheless, the fabrication of nanopores sub-10 nm on thin polymer membranes remains a significant challenge. This work proposes a method for fabricating nanopores on polymethyl methacrylate (PMMA) membrane by the local high electrical field controlled breakdown, exploring the impact of voltage and current on the breakdown of PMMA membranes and discussing the mechanism underlying the breakdown voltage and current during the formation of nanopores. By improving the electric field application method, transient high electric fields that are one-seven times higher than the breakdown electric field can be utilized to fabricate nanopores. A comparative analysis was performed on the current noise levels of nanopores in PMMA-SiNx composite membranes and SiNx nanopores with a 5 nm diameter. The results demonstrated that the fast fabrication of nanopores on PMMA-SiNx membranes exhibited reduced current noise compared to SiNx nanopores. This finding provides evidence supporting the feasibility of utilizing this technology for efficiently fabricating low-noise nanopores on polymer composite membranes.

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects.

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

Design of Highly Water-Permeable Nanoporous Membrane by Arrangement of Regular Atomic Charges on the Pore-Wall: A Non-Equilibrium Molecular Dynamics Study

Design of Highly Water-Permeable Nanoporous Membrane by Arrangement of Regular Atomic Charges on the Pore-Wall: A Non-Equilibrium Molecular Dynamics Study

Role of Carbon Nanotube Wetting Transparency in Rapid Water Transport for a Nanopore Membrane.

A carbon nanotube (CNT) may facilitate near-frictionless water transport within it. In this work, we elucidate the slip flow characteristics for a CNT embedded in a silicon nitride matrix using the molecular dynamics (MD) method. We reveal that the wetting transparency of a CNT, the transmission of the membrane matrix wetting property over a CNT, cannot be ignored. Due to the effect of CNT wetting transparency, the orientation flip behavior of water molecules should be the primary cause of the entrance and exit losses, which is a dominant factor influencing the interfacial friction coefficient for the thin CNT membrane. The relationship between the friction coefficient and pore size follows a logarithmic function, which agrees well with the reported experimental data. Our findings bridge the gap between the MD prediction and experimental observation for water transport in a CNT membrane and provide a clear understanding of the mechanism behind its ultrafast flow performance.

Effect of Phosphatidylethanolamine on Pore Formation Induced by the Antimicrobial Peptide PGLa.

Most antimicrobial peptides (AMPs) induce pore formation and a burst of lipid bilayers and plasma membranes. This causes severe leakage of the internal contents and cell death. The AMP PGLa forms nanopores in giant unilamellar vesicles (GUVs) comprising dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylglycerol (DOPG). We here elucidated the effect of the line tension of a prepore rim on PGLa-induced nanopore formation by investigating the interaction of PGLa with single GUVs comprising dioleoylphosphatidylethanolamine (DOPE)/DOPG (6:4) in buffer using the single GUV method. We found that PGLa forms nanopores in the GUV membrane, which evolved into a local burst and burst of GUVs. The rate of pore formation in DOPE/DOPG-GUVs was smaller than that in DOPC/DOPG-GUVs. PGLa is located only in the outer leaflet of a GUV bilayer just before a fluorescent probe AF647 leakage from the inside, indicating that this asymmetric distribution induces nanopore formation. PGLa-induced local burst and burst of GUVs were observed at 10 ms-time resolution. After nanopore formation started, dense particles and small vesicles appeared in the GUVs, followed by a decrease in the GUV diameter. The GUV was finally converted into smaller GUV or lipid membrane aggregates. We discuss the mechanisms of PGLa-induced nanopore formation and its direct evolution to a GUV burst.

Electrochemical oxidation of ammonia in water by Pt/NbC membrane-based catalytic nanofluid reactor

Electrochemical oxidation has garnered increasing attention for its potential in treating ammonia in wastewater. However, achieving both high conversion and high nitrogen selectivity simultaneously, while maintaining a short hydraulic retention time (HRT), remains a significant challenge. In this study, we constructed an efficient niobium carbide (NbC) nanoporous membrane reactor by incorporating metal platinum as a catalyst for the electrochemical oxidation of ammonia. The electrocatalytic oxidation process occurred within the nanochannels of the membrane. This design allowed for enhanced single-pass removal of ammonia due to the short diffusion distance on the nanometer scale, which subsequently increased the mass transfer efficiency. Remarkably, we achieved highly controllable pore sizes in the NbC membrane, ranging from 200 to 8.3 nm by dip-coating method. Without the addition of any oxidants, the single-pass removal of ammonia reached 100 % when the applied potential was set at 4 V vs. SCE on a membrane with a pore size of 8.3 nm, and an HRT of 249 s. The primary product obtained from this process was nitrogen, displaying a selectivity of 88.09 %, with a small percentage of nitrate production (selectivity of 11.91 %). By decreasing the applied potential or increasing the pore size, the selectivity of nitrogen can be further improved, reaching 100 %. However, this adjustment may lead to a decrease in the conversion of ammonia. DFT results have revealed that the production of nitrogen on the Pt (111) surface occurs through the NH4+→NH3 → NH2 → N → N2 pathway. This finding contributes to the understanding of the electrochemical process for ammonia removal in water, and provides a viable option for the design of efficient nanomembrane reactors.

A Universal Approximation for Conductance Blockade in Thin Nanopore Membranes.

Nanopore-based sensing platforms have transformed single-molecule detection and analysis. The foundation of nanopore translocation experiments lies in conductance measurements, yet existing models, which are largely phenomenological, are inaccurate in critical experimental conditions such as thin and tightly fitting pores. Of the two components of the conductance blockade, channel and access resistance, the access resistance is poorly modeled. We present a comprehensive investigation of the access resistance and associated conductance blockade in thin nanopore membranes. By combining a first-principles approach, multiscale modeling, and experimental validation, we propose a unified theoretical modeling framework. The analytical model derived as a result surpasses current approaches across a broad parameter range. Beyond advancing our theoretical understanding, our framework's versatility enables analyte size inference and predictive insights into conductance blockade behavior. Our results will facilitate the design and optimization of nanopore devices for diverse applications, including nanopore base calling and data storage.