Nanopore Sequencing Technology Research Articles

LCMS-Metabolomic Profiling and Genome Mining of Delftia lacustris DSM 21246 Revealed Lipophilic Delftibactin Metallophores.

Bacteria have evolved various strategies to combat heavy metal stress, including the secretion of small molecules, known as metallophores. These molecules hold a potential role in the mitigation of toxic metal contamination from the environment (bioremediation). Herein, we employed combined comparative metabolomic and genomic analyses to study the metallophores excreted by Delftia lacustris DSM 21246. LCMS-metabolomic analysis of this bacterium cultured under iron limitation led to a suite of lipophilic metallophores exclusively secreted in response to iron starvation. Additionally, we conducted genome sequencing of the DSM 21246 strain using nanopore sequencing technology and employed antiSMASH to mine the genome, leading to the identification of a biosynthetic gene cluster (BGC) matching the known BGC responsible for delftibactin A production. The isolated suite of amphiphilic metallophores, termed delftibactins C-F (1-4), was characterized using various chromatographic, spectroscopic, and bioinformatic techniques. The planar structure of these compounds was elucidated through 1D and 2D NMR analyses, as well as LCMS/MS-based fragmentation studies. Notably, their structures differed from previously known delftibactins due to the presence of a lipid tail. Marfey's and bioinformatic analyses were employed to determine the absolute configuration of the peptide scaffold. Delftibactin A, a previously identified metallophore, has exhibited a gold biomineralizing property; compound 1 was tested for and also demonstrated this property.

Chromosomal-level genome assembly and annotation of the tropical sea cucumber Holothuria scabra

Holothuria scabra, a commercially valuable yet ecologically vulnerable tropical holothuroid, has experienced a severe decline in its wild populations, especially in China. Genomic resources are crucial for the development of effective genomic breeding projects and stock conservation strategies to restore these natural populations. Until now, a high-quality, chromosome-level reference genome for H. scabra has not been available. Here, we employed Oxford Nanopore and Hi-C sequencing technologies to assemble and annotate a high-quality, chromosome-level reference genome of H. scabra. The final genome comprised 31 scaffolds with a total length of 1.19 Gb and a scaffold N50 length of 53.52 Mb. Remarkably, 1,191.67 Mb (99.95%) of the sequences were anchored to 23 pseudo-chromosomes, with the longest one spanning 79.75 Mb. A total of 34,418 protein-coding genes were annotated in the final genome, with BUSCO analysis revealing 98.01% coverage of metazoa_odb10 genes, marking a significant improvement compared to the previous report. These chromosome-level sequences and annotations will provide an essential genomic basis for further investigation into molecular breeding and conservation management of H. scabra.

Emergence of SARS-CoV-2 Omicron sub-lineage JN.1 in Bangladesh.

We report complete genome sequences of 14 severe acute respiratory syndrome coronavirus 2 Omicron sub-lineage JN.1 obtained from Bangladeshi individuals between 19 December 2023 and 21 January 2024. All sequence data were generated by Oxford Nanopore Sequencing Technology using the amplicon sequencing approach developed by the ARTIC network.

Snapshot study of canine distemper virus in Bangladesh with on-site PCR detection and nanopore sequencing

Canine distemper virus (CDV) is a highly contagious virus that affects domestic and wild animals, causing severe illness with high mortality rates. Rapid monitoring and sequencing can provide valuable information about circulating CDV strains, which may foster effective vaccination strategies and the successful integration of these into conservation programs. During two site visits in Bangladesh in 2023, we tested a mobile, deployable genomic surveillance setup to explore the genetic diversity and phylogenetic patterns of locally circulating CDV strains. We collected and analysed 355 oral swab samples from stray dogs in Rajshahi and Chattogram cities, Bangladesh. CDV-specific real-time RT-PCR was performed to screen the samples. Out of the 355 samples, 7.4% (10/135) from Rajshahi city and 0.9% (2/220) from Chattogram city tested positive for CDV. We applied a real-time RT-PCR assay and a pan-genotype CDV-specific amplicon-based Nanopore sequencing technology to obtain the near-completes. Five near-complete genome sequences were generated, with phylogenetic relation to the India-1/Asia-5 lineage previously identified in India. This is the first study to provide genomic data on CDV in Bangladesh and the first demonstration of a mobile laboratory setup as a powerful tool in rapid genomic surveillance and risk assessment for CDV in low resource regions.

Direct Identification of Complex Glycans via a Highly Sensitive Engineered Nanopore.

The crucial roles that glycans play in biological systems are determined by their structures. However, the analysis of glycan structures still has numerous bottlenecks due to their inherent complexities. The nanopore technology has emerged as a powerful sensor for DNA sequencing and peptide detection. This has a significant impact on the development of a related research area. Currently, nanopores are beginning to be applied for the detection of simple glycans, but the analysis of complex glycans by this technology is still challenging. Here, we designed an engineered α-hemolysin nanopore M113R/T115A to achieve the sensing of complex glycans at micromolar concentrations and under label-free conditions. By extracting characteristic features to depict a three-dimensional (3D) scatter plot, glycans with different numbers of functional groups, various chain lengths ranging from disaccharide to decasaccharide, and distinct glycosidic linkages could be distinguished. Molecular dynamics (MD) simulations show different behaviors of glycans with β1,3- or β1,4-glycosidic bonds in nanopores. More importantly, the designed nanopore system permitted the discrimination of each glycan isomer with different lengths in a mixture with a separation ratio of over 0.9. This work represents a proof-of-concept demonstration that complex glycans can be analyzed using nanopore sequencing technology.

[The identification of a novel reassortant H3N2 avian influenza virus based on nanopore sequencing technology and genetic characterization].

Objective: To identify a novel reassortant H3N2 avian influenza virus using nanopore sequencing technology and analyze its genetic characteristics. Methods: The positive samples of the H3N2 avian influenza virus, collected from the external environment in the farmers' market of Guangzhou, were cultured in chicken embryos. The whole genome was sequenced by targeted amplification and nanopore sequencing technology. The genetic characteristics were analyzed using bioinformatics software. Results: The phylogenetic trees showed that each gene fragment of the strain belonged to the Eurasian evolutionary branch, and the host source was of avian origin. The HA gene was closely related to the origin of the H3N6 virus. The NA gene was closely related to the H3N2 avian influenza virus from 2017 to 2020. The PB1 gene was closely related to the H5N6 avian influenza virus in Guangxi Zhuang Autonomous Region and Fujian Province from 2016 to 2022 and was not related to the PB1 gene of the H5N6 avian influenza epidemic strain in Guangzhou. The other internal gene fragments had complex sources with significant genetic diversity. Molecular characteristics indicated that the strain exhibited the molecular characteristics of a typical low pathogenic avian influenza virus and tended to bind to the receptors of avian origin. On important protein sites related to biological characteristics, this strain had mutations of PB2-L89V, PB1-L473V, NP-A184K, M1-N30D/T215A, and NS1-P42S/N205S. Conclusions: This study identified a novel reassortant H3N2 avian influenza virus by nanopore sequencing, with the PB1 gene derived from the H5N6 avian influenza virus. The virus had a low ability to spread across species, but further exploration was needed to determine whether its pathogenicity to the host was affected.

The chromosome-level genome assembly of the giant dobsonfly Acanthacorydalis orientalis (McLachlan, 1899)

Acanthacorydalis orientalis (McLachlan, 1899) (Megaloptera: Corydalidae) is an important freshwater-benthic invertebrate species that serves as an indicator for water-quality biomonitoring and is valuable for conservation from East Asia. Here, a high-quality reference genome for A. orientalis was constructed using Oxford Nanopore sequencing and High throughput Chromosome Conformation Capture (Hi-C) technology. The final genome size is 547.98 Mb, with the N50 values of contig and scaffold being 7.77 Mb and 50.53 Mb, respectively. The longest contig and scaffold are 20.57 Mb and 62.26 Mb in length, respectively. There are 99.75% contigs anchored onto 13 pseudo-chromosomes. Benchmarking Universal Single-Copy Orthologs (BUSCO) analysis showed that the completeness of the genome assembly is 99.01%. There are 10,977 protein-coding genes identified, of which 84.00% are functionally annotated. The genome contains 44.86% repeat sequences. This high-quality genome provides substantial data for future studies on population genetics, aquatic adaptation, and evolution of Megaloptera and other related insect groups.

Hybrid Assembly of Complete Genomes of <I>Yersinia pestis</I> Strains

The aim of the study was to assemble full-length nucleotide sequences of the chromosome and plasmids for 13 Yersinia pestis strains from 11 natural plague foci located in the Russian Federation, using data from two sequencing technologies.Materials and methods. Y. pestis strains were grown on Hottinger’s agar (pH 7.2) at 37 °C. DNA was isolated using phenol-chloroform extraction. For the MinIon genetic analyzer (Oxford Nanopore), DNA fragments were prepared by ligation according to a modified protocol. For the Ion S5 genetic analyzer (IonTorrent), sample preparation was carried out according to the standard protocol for obtaining a library with a DNA fragment size of 400 nucleotide pairs (bp). The resulting single reads were filtered by average quality Q30 for IonTorrent and Q7 for Oxford Nanopore.Results and discussion. DNA fragments containing 50 000 or more nucleotide pairs were prepared for subsequent sequencing using nanopore sequencing technology (Oxford Nanopore). The Trycycler algorithm was applied for hybrid assembly of the genome of Y. pestis strains and correction of errors arising during this process, allowing the obtainment of full-length nucleotide sequences of the chromosome and plasmids for each genome of the strain. The nucleotide sequences of the chromosomes of 13 Y. pestis strains from 11 natural foci of plague located in the Russian Federation have been deposited in the international genetic database NCBI GenBank. It has been established that to assemble full-length genomes of Y. pestis strains, a significant number of reads with a size of 50 000 bp or more is required, and the use of the Trycycler algorithm allows one to generate a more accurate assembly of complete bacterial genomes.

Abstract 329: NanoTelo: A workflow for detecting telomere absolute length based on nanopore sequencing technology

Abstract Background: Telomeres are specialized nucleoprotein structures located at the end of linear chromosomes in eukaryotic cells, and protect the ends of chromosomal DNA from degradation, end-to-end fusion and abnormal recombination. Changes in telomere length have become an important biomarker, which is closely related to cellular aging, all-cause mortality and a variety of diseases. However, there are still challenges in quantifying telomere absolute length, due to repeats of nucleotide sequence (5’-TTAGGG-3’)n in single-stranded G-rich telomeric region, and lack of a method for nucleotide separation and enrichment of individual telomeres. Methods: We developed NanoTelo, a workflow for detecting telomere absolute length based on nanopore sequencing technology. For experimental steps, a self-designed telomere adapter was first connected to the C-rich strand at the end of the chromosome by utilizing the 3' end overhang. And the 5' end of the telomere adapter was complementary to the sequencing adapter, allowing the antisense telomere chain to perform single-strand extension sequencing in the 5' to 3' direction, thus into the sub-telomeric region from the telomere end. The sequencing library was nanopore-sequenced on the QPursue-6k according to the manufacturer’s instructions. For data analysis, reads were strictly extracted (dataset B) with the telomere adapter and library structure in raw sequencing data (dataset A). The reads of dataset A and dataset B were corrected, aligned to the human reference genome (T2T-CHM13v2.0), and calculated the telomere length distribution of each chromosomal (autosomes and sex chromosomes) p/q-arm, respectively. Defined the mean telomere length of all chromosomes represented the overall telomere length, the estimated results of dataset A and dataset B were weighted to obtain the final telomere absolute length. Results: We selected 5 cell lines, which was HCT116, 293T, T24, IMR90 and WI38, and performed 2 experimental replicates for each one. We found that the estimated telomere lengths for each cell line were 3,528/3,512 bp, 4,298/4,311 bp, 2,745/2,685 bp, 4,926/4,915 bp and 4,143/4,096 bp, respectively. A comparative analysis with results from the Pacbio sequencing platform for each cell line in the Tham et al.'s paper, showed that there was no significant statistical difference (two-tailed T-test: p-value=0.98), and the mean absolute difference for estimated telomere length between the two platforms was 7.7 bp (95% CI: 5.4-10.0 bp). Conclusions: NanoTelo demonstrated the possibility of measuring telomere absolute length with a single chromosomal p/q-arm at nucleotide-level resolution. We hope that NanoTelo can not only be used as an important tool for estimating telomere length to dynamically monitor aging, but also provide strong technical support for scientific research and/or clinical application related to human anti-aging and disease intervention. Citation Format: Jidong Lang, Yanmei Chen, Zhi Yang, Beibei Huo. NanoTelo: A workflow for detecting telomere absolute length based on nanopore sequencing technology [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 329.

Abstract 2937: Accurate detection of human papillomavirus breakpoints in cervical cancers using a novel library preparation strategy for nanopore sequencing technology

Abstract Introduction: Integration of human papillomavirus (HPV) DNA into the human genome is considered as a key event in cervical carcinogenesis. Different methods have been employed in exploring HPV integration sites, such as APOT, DIPS-PCR, and NGS. However, these methods have their drawbacks. APOT heavily relies on the quality of the sample due to its dependence on RNA, while DIPS-PCR mostly identifies known sites and has limited capability in uncovering new integration sites. Although the detection sensitivity of virus infection status increased significantly through the Illumina sequencing platform, there were still disadvantages remain for further improvement, including the detection accuracy and the complex integrated genome structure identification, etc. Also, it requires large amounts of sequencing data, and thus is not applicable in clinical usage, which requires fast and accurate results. Therefore, the development of a new method for HPV integration detection with high accuracy and prompt reporting capacity is crucial for future clinical application. Methods: We established a novel library preparation strategy for the detection of HPV integration in the human genome using Oxford Nanopore sequencing. Using this novel technology, Nanopore libraries were prepared from HPV positive cell lines HeLa and SiHa followed by sequencing on the Oxford Nanopore. We also determined HPV integration sites in five patients with cervical cancer patients with HPV positive tumors using Ilumina WGS. HPV integrations and breakpoints in human genome from both Nanopore and Ilumina WGS were extracted using Minimap and ViFi tool respectively. All HPV integration sites from cell lines and patient samples were validated using Sanger sequencing. Results: The novel library preparation approach for detection of HPV integrations with Nanopore sequencing technology were sensitive and efficient in detection of commonly reported HPV breakpoints in HPV positive cell lines HeLa and SiHa. Additionally, we applied this method to clinical samples from five patients subjected to Whole Genome Sequencing, consistently yielding concordant results. Conclusion: Our Nanopore based assay for detecting HPV integrations without the need for WGS demonstrated high efficacy. These data highlight the sensitivity and efficiency of this methodology in detecting HPV integrations events, emphasizing its potential as a reliable diagnostic tool in understanding pathophysiology of HPV-related malignancies and its use as prognostic markers in clinical settings. Citation Format: Preetiparna Parida, Nivedita Mukherjee, Agastya Singh, Ashima Singh, Krishna Sharan, Mahadev Rao, Shirley Lewis, Sabarinathan Radhakrishnan, Rama Rao Damerla. Accurate detection of human papillomavirus breakpoints in cervical cancers using a novel library preparation strategy for nanopore sequencing technology [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 2937.

Abstract 2338: Benchmarking long- and short-read somatic structural variation callers using a multi-technology panel of six tumor/normal cell lines

Abstract Better structural variation (SV) detection could improve cancer diagnosis, treatment and prevention. Yet many cancer genomics studies have only reliably detected single nucleotide variants and small indels due to technological limitations of short-read sequencing. While structural variants can be inferred from discordant short read pairs, as much as 70% of SVs remain undetected because of the mappability difficulties. This is especially true for SVs in regions where GC content is greater than 45% or regions which harbor tandem repeats and segmental duplications. Advances in long-read sequencing enabled direct observation of SVs with recall and precision over 95% across a larger portion of the genome. To harness this technology, we developed Severus - a long-read SV caller that provides phased detection of both simple germline SVs as well as complex rearrangements commonly found in cancer genomes. Such rearrangements are built into a breakpoint graph to reconstruct derived tumor chromosome structure. To benchmark Severus and other long-read SV calling methods, we sequenced six tumor/normal cell line pairs using Nanopore, HiFi, short-read and Hi-C sequencing technologies. We combined the calls from multiple tools and technologies to generate benchmarking sets of somatic SV for each tumor cell line, and evaluated short- and long-read tools against this benchmark set. Current tools for SV merging and comparison (such as truvari) were primarily designed for long indels, rather than breakends that are more common in somatic SVs. Another challenge is that different tools may represent the same variants differently in a VCF output. To enable robust somatic SV outputs comparison, we developed a tool called Minda that translates an input VCF entries into a unified representation, and then compares the calls in either pairwise or multi-tool mode. As expected, in our benchmarking of cell six tumor cell line pairs, short-read methods had substantially lower recall and precision, compared to long-read methods. Among the long-read methods, Severus consistently had substantially better recall and precision, compared to Sniffles2, nanomonsv and SAVANA. An analysis of publicly available long-read sequencing of a melanoma cell line (for which curated benchmark SV set is available) produced consistent results. Citation Format: Ayse Keskus, Asher Bryant, Tanveer Ahmad, Ataberk Donmez, Isabel Rodriguez, Nicole Rossi, Yi Xie, Byunggil Yoo, Rose Milano, Hong Lou, Jimin Park, Joshua Gardner, Brandy McNulty, Karen Miga, Mike Dean, Midhat Farooqi, Benedict Paten, Mikhail Kolmogorov. Benchmarking long- and short-read somatic structural variation callers using a multi-technology panel of six tumor/normal cell lines [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 2338.

A nanopore-based cucumber genome assembly reveals structural variations at two QTLs controlling hypocotyl elongation.

The Xishuangbanna (XIS) cucumber (Cucumis sativus var. xishuangbannanesis) is a semiwild variety that has many distinct agronomic traits. Here, long -reads generated by Nanopore sequencing technology helped assembling a high-quality genome (contig N50 = 8.7 Mb) of landrace XIS49. A total of 10,036 structural/sequence variations (SVs) were identified when comparing with Chinese Long (CL), and known SVs controlling spines, tubercles, and carpel number were confirmed in XIS49 genome. Two QTLs of hypocotyl elongation under low light, SH3.1 and SH6.1 were fine-mapped using introgression lines (donor parent, XIS49; recurrent parent, CL). SH3.1 encodes a red-light receptor Phytochrome B (PhyB, CsaV3_3G015190). An ∼4 kb large deletion (DEL) and highly divergent regions (HDRs) were identified in the promoter of the PhyB gene in XIS49. Loss of function of this PhyB caused a super-long hypocotyl phenotype. SH6.1 encodes a CCCH-type zinc finger protein FRIGIDA-ESSENTIAL LIKE (FEL, CsaV3_6G050300). FEL negatively regulated hypocotyl elongation but it was transcriptionally suppressed by a long terminal repeats (LTRs) retrotransposon insertion in CL cucumber. Mechanistically, FEL physically binds to the promoter of CONSTITUTIVE PHOTOMORPHOGENIC 1a (COP1a), regulating the expression of COP1a and the downstream hypocotyl elongation. These above results demonstrate the genetic mechanism of cucumber hypocotyl elongation under low light.

Nanopore Sequencing Technology as an Emerging Tool for Diversity Studies of Plant Organellar Genomes

In this comprehensive review, we explore the significant role that nanopore sequencing technology plays in the study of plant organellar genomes, particularly mitochondrial and chloroplast DNA. To date, the application of nanopore sequencing has led to the successful sequencing of over 100 plant mitochondrial genomes and around 80 chloroplast genomes. These figures not only demonstrate the technology’s robustness but also mark a substantial advancement in the field, highlighting its efficacy in decoding the complex and dynamic nature of these genomes. Nanopore sequencing, known for its long-read capabilities, significantly surpasses traditional sequencing techniques, especially in addressing challenges like structural complexity and sequence repetitiveness in organellar DNA. This review delves into the nuances of nanopore sequencing, elaborating on its benefits compared to conventional methods and the groundbreaking applications it has fostered in plant organellar genomics. While its transformative impact is clear, the technology’s limitations, including error rates and computational requirements, are discussed, alongside potential solutions and prospects for technological refinement.

Evaluation of Nanopore Sequencing on Polar Bodies for Routine Pre-Implantation Genetic Testing for Aneuploidy.

Preimplantation genetic testing for aneuploidy (PGT-A) using polar body (PB) biopsy offers a clinical benefit by reducing the number of embryo transfers and miscarriage rates but is currently not cost-efficient. Nanopore sequencing technology opens possibilities by providing cost-efficient and fast sequencing results with uncomplicated sample preparation work flows. In this comparative experimental study, 102 pooled PB samples (99 passing QC) from 20 patients were analyzed for aneuploidy using nanopore sequencing technology and compared with array comparative genomic hybridization (aCGH) results generated as part of the clinical routine. Samples were sequenced on a Nanopore MinION machine. Whole-chromosome copy-numbers were called by custom bioinformatic analysis software. Automatically called results were compared to aCGH results. Overall, 96/99 samples were consistently detected as euploid or aneuploid in both methods (concordance = 97.0%, sensitivity = 0.957, specificity = 1.0, positive predictive value = 1.0, negative predictive value = 0.906). On the chromosomal level, concordance reached 98.7%. Chromosomal aneuploidies analyzed in this trial covered all 23 chromosomes with 98 trisomies, and 97 monosomies in 70 aCGH samples.The whole nanopore work flow is feasible in under 5 h (for one sample) with a maximum time of 16 h (for 12 samples), enabling fresh PB-euploid embryo transfer. A material cost of US$ 165 (EUR 150)/sample possibly enables cost-efficient aneuploidy screening. This is the first study systematically comparing nanopore sequencing with standard methods for the detection of PB aneuploidy. High concordance rates confirmed the feasibility of nanopore technology for this application. Additionally, the fast and cost-efficient work flow reveals the clinical utility of this technology, making it clinically attractive for PB PGT-A.

Comprehensive analysis of m6A methylome alterations after azacytidine plus venetoclax treatment for acute myeloid leukemia by nanopore sequencing

N6 adenosine methylation (m6A), one of the most prevalent internal modifications on mammalian RNAs, regulates RNA transcription, stabilization, and splicing. Growing evidence has focused on the functional role of m6A regulators on acute myeloid leukemia (AML). However, the global m6A levels after azacytidine (AZA) plus venetoclax (VEN) treatment in AML patients remain unclear. In our present study, bone marrow (BM) sample pairs (including pre-treatment [AML] and post-treatment [complete remission (CR)] samples) were harvested from three AML patients who had achieved CR after AZA plus VEN treatment for Nanopore direct RNA sequencing. Notably, the amount of m6A sites and the m6A levels in CR BMs was significantly lower than those in the AML BMs. Such a significant reduction in the m6A levels was also detected in AZA-treated HL-60 cells. Thirteen genes with decreased m6A and expression levels were identified, among which three genes (HPRT1, SNRPC, and ANP32B) were closely related to the prognosis of AML. Finally, we speculated the mechanism via which m6A modifications affected the mRNA stability of these three genes. In conclusion, we illustrated for the first time the global landscape of m6A levels in AZA plus VEN treated AML (CR) patients and revealed that AZA had a significant demethylation effect at the RNA level in AML patients. In addition, we identified new biomarkers for AZA plus VEN-treated AML via Nanopore sequencing technology in RNA epigenetics.

Nanopore DNA sequencing technologies and their applications towards single-molecule proteomics.

Sequencing of nucleic acids with nanopores has emerged as a powerful tool offering rapid readout, high accuracy, low cost and portability. This label-free method for sequencing at the single-molecule level is an achievement on its own. However, nanopores also show promise for the technologically even more challenging sequencing of polypeptides, something that could considerably benefit biological discovery, clinical diagnostics and homeland security, as current techniques lack portability and speed. Here we survey the biochemical innovations underpinning commercial and academic nanopore DNA/RNA sequencing techniques, and explore how these advances can fuel developments in future protein sequencing with nanopores.

Microbiome diversity and zoonotic bacterial pathogen prevalence in Peromyscus mice from agricultural landscapes and synanthropic habitat.

Rodents are key reservoirs of zoonotic pathogens and play an important role in disease transmission to humans. Importantly, anthropogenic land-use change has been found to increase the abundance of rodents that thrive in human-built environments (synanthropic rodents), particularly rodent reservoirs of zoonotic disease. Anthropogenic environments also affect the microbiome of synanthropic wildlife, influencing wildlife health and potentially introducing novel pathogens. Our objective was to examine the effect of agricultural development and synanthropic habitat on microbiome diversity and the prevalence of zoonotic bacterial pathogens in wild Peromyscus mice to better understand the role of these rodents in pathogen maintenance and transmission. We conducted 16S amplicon sequencing on faecal samples using long-read nanopore sequencing technology to characterize the rodent microbiome. We compared microbiome diversity and composition between forest and synanthropic habitats in agricultural and undeveloped landscapes and screened for putative pathogenic bacteria. Microbiome richness, diversity, and evenness were higher in the agricultural landscape and synanthropic habitat compared to undeveloped-forest habitat. Microbiome composition also differed significantly between agricultural and undeveloped landscapes and forest and synanthropic habitats. We detected overall low diversity and abundance of putative pathogenic bacteria, though putative pathogens were more likely to be found in mice from the agricultural landscape. Our findings show that landscape- and habitat-level anthropogenic factors affect Peromyscus microbiomes and suggest that landscape-level agricultural development may be important to predict zoonotic pathogen prevalence. Ultimately, understanding how anthropogenic land-use change and synanthropy affect rodent microbiomes and pathogen prevalence is important to managing transmission of rodent-borne zoonotic diseases to humans.

Comprehensive genomic and plasmid characterization of multidrug-resistant bacterial strains by R10.4.1 nanopore sequencing

The escalating prevalence of multidrug-resistant (MDR) bacteria pose a significant public health threat. Understanding the genomic features and deciphering the antibiotic resistance profiles of these pathogens is crucial for development of effective surveillance and treatment strategies. In this study, we employed the R10.4.1 nanopore sequencing technology, specifically through the use of the MinION platform, to analyze eight MDR bacterial strains originating from clinical, ecological and food sources. A single 72-hour sequencing run could yield approximately 12 million reads which covered a total of 34 gigabases (Gbp). The nanopore R10.4.1 data was processed using the Flye assembler, successfully assembling the genomes of eight bacterial strains and their 18 plasmids. Notably, the assemblies generated solely from R10.4.1 nanopore data closely matched those from next-generation sequencing data. Diverse antibiotic resistance patterns and specific resistance genes in the test strains were identified. Hospital strains that exhibited multidrug resistance were found to harbor various resistance genes that encode efflux pumps and extended-spectrum β-lactamases. Environmental and food sources were found to display resistance profiles in a species-specific manner. The composition of structurally complex plasmids in the test strains could also be revealed by analysis of nanopore long reads, which also suggested evidence of horizontal transfer of plasmids between different bacterial species. These findings provide valuable insights into the genetic characteristics of MDR bacteria and demonstrating the practicality of nanopore sequencing technology for detecting of resistance elements in bacterial pathogens.

Genome sequence of thermophilic cellulolytic actinobacterium Thermobifida fusca strain UPMC 901 producing thermostable cellulases.

Thermophilic cellulolytic bacteria producing thermostable cellulase have multiple potential industrial and biotechnological applications. In this study, we sequenced the genome of Thermobifida fusca UPMC 901 by using nanopore sequencing technology with 100 % genome coverage. The represented genome is 3.76 Mb with a G + C content of 67.4 %. The genome is composed of 1 scaffold with 3207 protein-coding genes. The results indicated that the genome of the Thermobifida fusca gene encodes at least 112 genes for carbohydrate-active enzymes. Of these genes, 40 glycoside hydrolases (GHs), 36 glycosyl transferases (GTs), 22 carbohydrate-binding modules (CBMs), 9 carbohydrate esterases (CEs), 3 polysaccharide lyases (PL) and 2 auxiliary activity (AAs) which refer to as lytic polysaccharide monooxygenase (LPMO), gene encoding the copper-dependent enzymes that catalyse oxidative cleavage of recalcitrant crystalline cellulose, were identified. In addition, two new functional genes, amylo-α-1,6 glucosidase and endo-α-1,4-mannosidase were also detected in the T. fusca genome. This study represented the ninth genome of the T. fusca and the cellulase genes identified will facilitate the exploration of potential sources for industrial and agricultural applications.

Phenotypic and genomic characteristics of clinical IMP-producing Klebsiella spp. Isolates in China

BackgroundIMP-producing Klebsiella spp. (IMPKsp) strains have spread globally, including in China. Currently, the prevalence and genomic characterization of IMPKsp is largely unknown nationwide. Here we aimed to provide a general overview of the phenotypic and genomic characteristics of IMPKsp strains.Methods61 IMPKsp strains were obtained from 13 provinces in China during 2016-2021. All strains were tested for their susceptibility to antimicrobial agents by the microdilution broth method and sequenced with Illumina next-generation sequencing. We performed conjugation experiments on thirteen representative strains which were also sequenced by Oxford nanopore sequencing technology to characterize blaIMP-encoding plasmids.ResultsWe find that all IMPKsp strains display multidrug-resistant (MDR) phenotypes. All strains belong to 27 different STs. ST307 emerges as a principal IMP-producing sublineage. blaIMP-4 is found to be the major isoform, followed by blaIMP-38. Seven incompatibility types of blaIMP-encoding plasmids are identified, including IncHI5 (32/61, 52.5%), IncN-IncR (10/61, 16.4%), IncFIB(K)-HI1B (7/61, 11.5%), IncN (5/61, 8.2%), IncN-IncFII (2/61, 3.3%), IncFII (1/61, 1.6%) and IncP (1/61, 1.6%). The strains carrying IncHI5 and IncN plasmids belong to diverse ST types, indicating that these two plasmids may play an important role in the transmission of blaIMP genes among Klebsiella spp. strains.ConclusionsOur results highlight that multi-clonal transmission, multiple genetic environments and plasmid types play a major role in the dissemination process of blaIMP genes among Klebsiella spp. IncHI5 type plasmids have the potential to be the main vectors mediating the spread of the blaIMP genes in Klebsiella spp.