Surface Modification Of Nanoparticles Research Articles

Immobilization of Ficin Enzyme onto Surface-Modified Iron Oxide Nanoparticles: Characterization and Catalytic Activity

Immobilization of Ficin Enzyme onto Surface-Modified Iron Oxide Nanoparticles: Characterization and Catalytic Activity

A Review on Investigating the Interactions between Nanoparticles and the Pulmonary Surfactant Monolayer with Coarse-Grained Molecular Dynamics Method.

Pulmonary drug delivery has garnered significant attention due to its targeted local lung action, minimal toxic side effects, and high drug utilization. However, the physicochemical properties of inhaled nanoparticles (NPs) used as drug carriers can influence their interactions with the pulmonary surfactant (PS) monolayer, potentially altering the fate of the NPs and impairing the biophysical function of the PS monolayer. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affect their interactions with the PS monolayer. Initially, the definition and properties of NPs, as well as the composition and characteristics of the PS monolayer, are introduced. Subsequently, the coarse-grained molecular dynamics (CGMD) simulation method for studying the interactions between NPs and the PS monolayer is presented. Finally, the implications of the hydrophobicity, size, shape, surface charge, surface modification, and aggregation of NPs on their interactions with the PS monolayer and on the composition of biomolecular corona are discussed. In conclusion, gaining a deeper understanding of the effects of the physicochemical properties of NPs on their interactions with the PS monolayer will contribute to the development of safer and more effective nanomedicines for pulmonary drug delivery.

Effects of nano-smart water on enhanced oil recovery in carbonate reservoirs: Interfacial tension reduction and wettability alteration

Several studies have revealed that nanofluid and smart water flooding are cost-effective methods, considering the effect of nanoparticles and potential determining ions (PDIs) for enhanced oil recovery in carbonated reservoirs. This study presents the performance of nano-smart water synthesized with surface-modified SiO2 nanoparticles dispersed in PDI-controlled seawater (SW), ensuring dispersion stability in high-temperature and high-salinity reservoirs. The interfacial tension (IFT) and contact angle of the oil/nano-smart water/carbonate rock system were measured using kerosene as an oil phase. At this time, nanoparticle concentrations ranged from 0.5 to 3 wt% and PDI concentrations ranged from 1,000 to 5,000 ppm, such as KCl, MgCl2, MgSO4, and K2SO4. In addition, the IFT and contact angle of SW, low salinity water (LSW), and nanofluid were measured for comparison. It was observed that at nanoparticle concentrations higher than 1 wt%, the IFT values of nano-smart water remained constant or decreased slightly to below 31.91 mN/m compared with nanofluids at 32.18 mN/m, regardless of PDI type and concentration. This indicates that using nano-smart water instead of LSW and SW is expected to reduce the IFT in the oil/water system. The contact angle measurements revealed that the wettability index is 2.57–5.07 times higher in nano-smart water than in nanofluids. This implies that wettability alteration is accelerated by the synergistic effect of PDIs and nanoparticles. Specifically, PDI control with MgSO4 or K2SO4 is highly effective in changing the contact angle of carbonate from strongly oil-wet to strongly water-wet due to the ion exchange reaction of SO42- in oil/water/carbonate rock system. The nano-smart water used in this study is expected to be utilized as an injection fluid under harsh conditions for enhanced oil recovery.

Preparation, Surface Modification, and Building Materials Applications of Calcium Carbonate Nanoparticles

Preparation, Surface Modification, and Building Materials Applications of Calcium Carbonate Nanoparticles

Lipid Nanoparticles: Versatile Drug Delivery Vehicles for Traversing the Blood Brain Barrier to Treat Brain Cancer

AbstractThe blood‐brain barrier (BBB) poses a significant challenge in delivering therapeutic agents for brain diseases due to its high selectivity against foreign substances. This limitation greatly hampers the effectiveness of conventional chemotherapeutic drugs in treating brain cancers. In response, lipid‐based nanoparticles (LNPs) have emerged as a promising approach, offering opportunities for targeted drug delivery by conjugating targeting ligands onto their surface. This review provides a comprehensive overview of recent advancements in utilizing LNPs to traverse the BBB for enhanced transport of bioactive compounds into the brain, specifically for cancer treatments. Beginning with an exploration of the biological structure and functions of the BBB and the blood‐brain tumor barrier (BBTB), the review highlights the advantages presented by LNPs. Subsequently, it delves into strategies for surface modification of nanoparticles to enhance BBB targeting and improve efficacy in brain cancer treatment. Finally, the review offers insights into future prospects for designing the next generation of LNPs. The review presented herein aims to contribute to the ongoing efforts in overcoming the challenges associated with BBB penetration, ultimately advancing therapeutic strategies for brain cancer and other neurological disorders.

Scalable Dual In Situ Synthesis of Polyester Nanocomposites for High-Energy Storage.

Incorporating ultralow loading of nanoparticles into polymers has realized increases in dielectric constant and breakdown strength for excellent energy storage. However, there are still a series of tough issues to be dealt with, such as organic solvent uses, which face enormous challenges in scalable preparation. Here, a new strategy of dual in situ synthesis is proposed, namely polymerization of polyethylene terephthalate (PET) synchronizes with growth of calcium borate nanoparticles, making polyester nanocomposites from monomers directly. Importantly, this route is free of organic solvents and surface modification of nanoparticles, which is readily accessible to scalable synthesis of polyester nanocomposites. Meanwhile, uniform dispersion of as ultralow as 0.1 wt% nanoparticles and intense bonding at interfaces have been observed. Furthermore, the PET-based nanocomposite displays obvious increases in both dielectric constant and breakdown strength as compared to the neat PET. Its maximum discharged energy density reaches 15 J cm-3 at 690 MV m-1 and power density attains 218 MW cm-3 under 150 Ω resistance at 300 MV m-1, which is far superior to the current dielectric polymers that can be produced at large scales. This work presents a scalable, safe, low-cost, and environment-friendly route toward polymer nanocomposites with superior capacitive performance.

Folic acid-mediated enhancement of the diagnostic potential of luminescent europium-doped hydroxyapatite nanocrystals for cancer biomaging

Early and accurate cancer diagnosis is crucial for improving patient survival rates. Luminescent nanoparticles have emerged as a promising tool in fluorescence bioimaging for cancer diagnosis. To enhance diagnostic accuracy, ligands promoting endocytosis into cancer cells are commonly incorporated onto nanoparticle surfaces. Folic acid (FA) is one such ligand, known to specifically bind to folate receptors (FR) overexpressed in various cancer cells such as cervical and ovarian carcinoma. Therefore, surface modification of luminescent nanoparticles with FA can enhance both luminescence efficiency and diagnostic accuracy. In this study, luminescent europium-doped hydroxyapatite (EuHAp) nanocrystals were prepared via hydrothermal method and subsequently modified with (3-Aminopropyl)triethoxysilane (APTES) followed by FA to target FR-positive human cervical adenocarcinoma cell line (HeLa) cells. The sequential grafting of APTES and then FA formed a robust covalent linkage between the nanocrystals and FA. Rod-shaped FA-modified EuHAp nanocrystals, approximately 100 nm in size, exhibited emission peaks at 589, 615, and 650 nm upon excitation at 397 nm. Despite a reduction in photoluminescence intensity following FA modification, fluorescence microscopy revealed a remarkable 120-fold increase in intensity compared to unmodified EuHAp, attributed to the enhanced uptake of FA-modified EuHAp. Additionally, confocal microscope observations confirmed the specificity and the internalization of FA-modified EuHAp nanocrystals in HeLa cells. In conclusion, the modification of EuHAp nanocrystals with FA presents a promising strategy to enhance the diagnostic potential of cancer bioimaging probes.

Surface modification of ZIF-8 nanoparticles by hyaluronic acid for enhanced targeted delivery of quercetin

Quercetin (QT) is a natural pharmaceutical substance with anti-inflammatory, antibacterial, and anti-cancer features. Nevertheless, it has low bioavailability, zeolitic-imidazolate framework-8 (ZIF-8) nanoparticles (NPs) with merits like very high surface area and porous nature are increasingly employed in the biomedical field as drug delivery system (DDS). Hyaluronic acid (HA) is a polymer that can be a smart “switch” and tumor-targeted “guider”, extending blood circulation, and improving the tumor-specific accumulation of DDS through CD44-mediated pathway. Herein, we have successfully synthesized HA-modified ZIF-8 NPs (ZIF-8/HA) for targeted delivery of QT. After characterization of synthesized materials by different advanced techniques, the QT loading capacity of ZIF-8 was investigated through different factors like initial QT concentration, solvent type, loading time and loading temperature. The release of QT in vitro was studied at pH values of 7.4 and 5.5 and ZIF-8 NPs decreased the release of QT at pH 7.4, demonstrating their ability to reduce QT loss during its distribution in blood. Also, HA-modified ZIF-8 resulted in enhanced compatibility, a decrease in toxicity to normal cells and an increase in targeted delivery of QT. Furthermore, the cytotoxicity of QT-loaded ZIF-8/HA on fibroblast cell lines (L929) as well as breast cancer cell lines (MCF-7) were evaluated. It was found that QT-loaded ZIF-8/HA not only led to a decrease in the toxicity of ZIF-8 and QT to normal cells in the body but also increased the toxicity of QT to cancer cells.

The influence of doping with different surface modified SiO2 nanoparticles on the dielectric properties of natural ester insulating oil

Nanoparticles are presently considered to be high-potential filler materials in insulation medium. Surface-modified nanoparticles can not only improve the compatibility between nanoparticles and insulation liquid but also enhance the dielectric properties. Herein, models of soybean oil-based natural ester insulation oil doped with two silane coupling agents (A151, KH550) modified SiO2 were established, respectively. Molecular dynamics and DFT first principles were applied to explore the effect of two nanoparticles on the dielectric properties of liquid-insulation medium. The results showed that two types of nanoparticles can restrict the diffusion of water molecules by forming hydrogen bonds, while the number of hydrogen bonds in KH550–SiO2 is one-third more than that in A151-SiO2, and the interaction energy is lower, demonstrating a stronger adsorption effect on water molecules. Moreover, surface electrostatic potential and frontier molecular orbitals showed that KH550–SiO2 have a higher adsorption on charged particles in natural ester insulation oil, which can further inhibit the development of streamer discharge in the liquid insulation medium, improve its dielectric property and delay the aging and deterioration of natural ester insulation oil. This study extends our knowledge into the influence of silane coupling agents modified SiO2 nanoparticles on the dielectric performance of liquid insulation materials from a microscopic perspective.

Chitosan-mediated tailoring of cadmium sulphide nanoparticle: Synthesis, properties, and interactive mechanisms

This study explores the synergistic effects of chitosan-coated cadmium sulphide (CdS) nanoparticles (NPs) at varying concentrations on their structural, optical, and photocatalytic properties. CdS NPs are known for their promising photocatalytic potential, but their practical application often requires stability enhancement and reduced toxicity. Chitosan, a natural biopolymer, offers unique advantages such as biocompatibility and heavy metal adsorption capabilities, making it an attractive candidate for surface modification of CdS NPs. Our investigation reveals that chitosan-coated CdS NPs exhibit concentration-dependent changes in their crystalline structure, bandgap energy, particle size, and vibrational characteristics. Notably, CdS NPs synthesized with 1.5 g chitosan concentration display the smallest bandgap and particle size, suggesting optimal photocatalytic activity. This research provides valuable insights into tailoring CdS NPs for efficient visible light photocatalysis, with implications in environmental remediation and energy conversion.

Schottky Junction Enhanced Photosynthesis of Hydrogen Peroxide by Ultrathin Porous Carbon Nitride Supported Ni Nanoparticles.

Artificial photosynthesis for high-value hydrogen peroxide (H2O2) through a two-electron reduction reaction is a green and sustainable strategy. However, the development of highly active H2O2 photocatalysts is impeded by severe carrier recombination, ineffective active sites, and low surface reaction efficiency. We developed a dual optimization strategy to load dense Ni nanoparticles onto ultrathin porous graphitic carbon nitride (Ni-UPGCN). In the absence and presence of sacrificial agents, Ni-UPGCN achieved H2O2 production rates of 169 and 4116 μmol g-1 h-1 with AQY (apparent quantum efficiency) at 420 nm of 3.14% and 17.71%. Forming a Schottky junction, the surface-modified Ni nanoparticles broaden the light absorption boundary and facilitate charge separation, which act as active sites, promoting O2 adsorption and reducing the formation energy of *OOH (reaction intermediate). This results in a substantial improvement in both H2O2 generation activity and selectivity. The Schottky junction of dual modulation strategy provides novel insights into the advancement of highly effective photocatalytic agents for the photosynthesis of H2O2.

Synthesis of Hybrid/Superhydrophobic Coupling Agent Grafted Nano SiO2 and Its Use in Fabrication of Rubber Nanocomposite with Outstanding Oil/Water Separation Capability

Design and synthesis of a new sorbent with high performances of oil-water separation is one of the challenges to the world community. Herein, a superhydrophobic/novel coupling agent (NCA) containing several vinyl groups was synthesized. Also, vinyl isocyanate (VI) and tetraethoxysilane (TEOS) reacted with a synergetic strategy of crosslinked networks through the click reaction under N2 gas atmosphere. 1H NMR and FTIR analyses confirmed the formation of NCA with the SiC10H18O6N2 chemical formula. Then, NCA was grafted on the nanoparticles at different amounts by sol-gel method. It was found that the surface modification of nanoparticles enhanced the water contact angle (WCA) from 60° to 163°. In the following, nanoparticles with and without NCA were applied at different contents to tire rubber compound. The uniform dispersion/distribution of the grafted nano fillers with NCA in polymer matrix and the strong filler-polymer interactions enhanced crosslink density and improved the mechanical performances of the rubber sample. The prepared nanocomposites were tested against absorption of different oils. The results showed that the superior nanocomposite with modified nanoparticles (i.e. TR-TNS5) had a separation efficiency of over 90 % compared to the nanocomposite with pure nanoparticles (i.e. TR-NS5) which had a separation efficiency of less than 30 %. Also, the separation cycle of nanocomposites improved by 95 % after addition of the modified nanoparticles (from 240 to 440 cycles). The modified nanocomposite illustrated contact angles of 153.22° and 13.34° with water and oil droplets, respectively. The results showed that the modified rubbery nanocomposite confirmed superior mechanical and oil-water separation performances.

Increased Deep Trap Density in Interfacial Engineered Nanocomposite Revealed by Sequential Kelvin Probe Force Microscopy for High Dielectric Energy Storage.

Nanocomposites combining inorganic nanoparticles with high dielectric constant and polymers with high breakdown strength are promising for the high energy density storage of electricity, and carrier traps can significantly affect the dielectric breakdown process. Nevertheless, there still lacks direct experimental evidence on how nanoparticles affect the trap characteristics of nanocomposites, especially in a spatially resolved manner. Here, a technique is developed to image the trap distribution based on sequential Kelvin probe force microscopy (KPFM) in combination with the isothermal surface potential decay (ISPD) technique, wherein both shallow and deep trap densities and the corresponding energy levels can be mapped with nanoscale resolution. The technique is first validated using the widely-used commercial biaxially oriented polypropylene, yielding consistent results with macroscopic ISPD. The technique is then applied to investigate polyvinylidene fluoride-based nanocomposites filled with barium titanate nanoparticles, revealing higher deep trap density around surface-modified nanoparticles, which correlates well with its increased breakdown strength. This technique thus provides a powerful spatially resolved tool for understanding the microscopic mechanism of dielectric breakdown of nanocomposites.

Significantly optimized piezoelectric catalytic properties of surface functionalized Nano-BaTiO3

In piezoelectric catalysis, the interaction between reaction molecules and the catalyst surface is of great significance for designing highly selective reaction processes. In this study, chemically functionalized BaTiO3 nanoparticles were fabricated using the hydrothermal method, and the piezoelectric catalytic activity was evaluated for degradation dye reactants by ultrasonic vibration. Due to surface modification of BaTiO3 nanoparticles, the carboxyl groups will be applied on the surface of BaTiO3 nanoparticles, resulting in the reduction in particle size and an increase in specific surface area. The adsorption of the carboxyl groups on the surface can also improve the ability of the BaTiO3 nanoparticles to capture the organic dyes. A high piezoelectric catalytic reaction rate constant of 0.0716 min−1, together with a degradation efficiency of >90 % was achieved within 30 min under 60 kHz and 100 W ultrasonic conditions. These results show that the surface modification of BaTiO3 nanoparticles brought excellent performance of piezoelectric catalysis by controlling the precursor and hydrothermal parameters. This study provides a new method for the preparation of chemically functionalized piezoelectric catalysts and design of other new highly selective catalysts.

Enhanced interaction of CO2 with TCNQ-modified CuO nanoparticle-infused PEO matrix: A novel approach in gas transport technology

We developed a composite membrane based on polyethylene oxide (PEO), achieving high CO2 selectivity, by incorporating 7,7,8,8-tetracyanoquinodimethane (TCNQ)-modified CuO nanoparticles into the PEO matrix. The addition of TCNQ helps in evenly distributing the CuO nanoparticles throughout the membrane, preventing them from clumping together. This treatment not only enhances the dispersion of CuO particles but also imparts a positive charge to their surface, which is beneficial for increasing the selectivity for CO2 over N2. The extent of this surface charge modification on the CuO nanoparticles was evaluated using X-ray photoelectron spectroscopy (XPS), while the synergy between the polymer and the additives was verified through Fourier-transform infrared (FT-IR) spectroscopy studies. The combination of CuO nanoparticles in the membrane contributes to both barrier and carrier effects, enhancing the gas selectivity. This is further aided by the intrinsic properties of PEO, a rubber-like polymer known for its good gas permeance. As a result of these combined effects, the PEO/CuO/TCNQ membrane exhibited a remarkable CO2 selectivity of 393 and a CO2 permeance of 3.9 gas permeation unit (GPU). The superior separation performance of this membrane can be ascribed to three main factors: enhanced solubility due to the oxide layer on the particle surfaces and in the polymer matrix, improved transport efficiency via reversible interactions thanks to the positively charged surface, and the effective barrier provided by the nanoparticles against N2 transport. These findings are expected to contribute significantly to future studies on the surface modification of metal nanoparticles and in the field of gas separation membranes.

Delivery of Chlorambucil to the Brain Using Surface Modified Solid Lipid Nanoparticles.

The delivery of drugs to the brain in the therapy of diseases of the central nervous system (CNS) remains a continuing challenge because of the lack of delivery systems that can cross the blood-brain barrier (BBB). Therefore, there is a need to develop an innovative delivery method for the treatment of CNS diseases. Thus, we have investigated the interaction of γ-aminobutyric acid (GABA) and S-(-)-γ-amino-α-hydroxybutyric acid (GAHBA) with the GABA receptor by performing a docking study. Both GABA and GAHBA show comparable binding affinities toward the receptor. In this study, we developed surface-modified solid lipid nanoparticles (SLNs) using GAHBA-derived lipids that can cross the BBB. CLB-loaded SLNs were characterized by a number of methods including differential scanning calorimetry, dynamic light scattering, UV-vis spectroscopy, and transmission electron microscopy. The blank and CLB-loaded SLN suspensions were found to exhibit good storage stability. Also, the SLNs showed a higher encapsulation efficiency for CLB drugs. In vitro release kinetics of CLB at physiological temperature was also investigated. The results of the in vitro cell cytotoxicity assay and flow cytometry studies in the human glioma U87MG cell line and human prostate cancer PC3 cell line suggested a higher efficacy of the GAHBA-modified CLB-loaded SLNs in U87MG cells. The transcription level of GABA receptor expression in the target organ and cell line was analyzed by a reverse transcription polymerase chain reaction study. The in vivo biodistribution and brain uptake in C57BL6 mice and SPECT/CT imaging in Wistar rats investigated using 99mTc-labeled SLN and autoradiography suggest that the SLNs have an increasing brain uptake. We have demonstrated the delivery of the anticancer drug chlorambucil (CLB) to glioma.

Advances in Nanotechnology for Enhancing the Solubility and Bioavailability of Poorly Soluble Drugs.

This manuscript offers a comprehensive overview of nanotechnology's impact on the solubility and bioavailability of poorly soluble drugs, with a focus on BCS Class II and IV drugs. We explore various nanoscale drug delivery systems (NDDSs), including lipid-based, polymer-based, nanoemulsions, nanogels, and inorganic carriers. These systems offer improved drug efficacy, targeting, and reduced side effects. Emphasizing the crucial role of nanoparticle size and surface modifications, the review discusses the advancements in NDDSs for enhanced therapeutic outcomes. Challenges such as production cost and safety are acknowledged, yet the potential of NDDSs in transforming drug delivery methods is highlighted. This contribution underscores the importance of nanotechnology in pharmaceutical engineering, suggesting it as a significant advancement for medical applications and patient care.

Synthesis, Surface Modification and Magnetic Properties Analysis of Heat-Generating Cobalt-Substituted Magnetite Nanoparticles.

Here, we present the results of the synthesis, surface modification, and properties analysis of magnetite-based nanoparticles, specifically Co0.047Fe2.953O4 (S1) and Co0.086Fe2.914O4 (S2). These nanoparticles were synthesized using the co-precipitation method at 80 °C for 2 h. They exhibit a single-phase nature and crystallize in a spinel-type structure (space group Fd3¯m). Transmission electron microscopy analysis reveals that the particles are quasi-spherical in shape and approximately 11 nm in size. An observed increase in saturation magnetization, coercivity, remanence, and blocking temperature in S2 compared to S1 can be attributed to an increase in magnetocrystalline anisotropy due to the incorporation of Co ions in the crystal lattice of the parent compound (Fe3O4). The heating efficiency of the samples was determined by fitting the Box-Lucas equation to the acquired temperature curves. The calculated Specific Loss Power (SLP) values were 46 W/g and 23 W/g (under HAC = 200 Oe and f = 252 kHz) for S1 and S2, respectively. Additionally, sample S1 was coated with citric acid (Co0.047Fe2.953O4@CA) and poly(acrylic acid) (Co0.047Fe2.953O4@PAA) to obtain stable colloids for further tests for magnetic hyperthermia applications in cancer therapy. Fits of the Box-Lucas equation provided SLP values of 21 W/g and 34 W/g for CA- and PAA-coated samples, respectively. On the other hand, X-ray photoelectron spectroscopy analysis points to the catalytically active centers Fe2+/Fe3+ and Co2+/Co3+ on the particle surface, suggesting possible applications of the samples as heterogeneous self-heating catalysts in advanced oxidation processes under an AC magnetic field.

Time-Dependent and Coating Modulation of Tomato Response upon Sulfur Nanoparticle Internalization and Assimilation: An Orthogonal Mechanistic Investigation.

Nanoenabled strategies have recently attracted attention as a sustainable platform for agricultural applications. Here, we present a mechanistic understanding of nanobiointeraction through an orthogonal investigation. Pristine (nS) and stearic acid surface-modified (cS) sulfur nanoparticles (NPs) as a multifunctional nanofertilizer were applied to tomato (Solanum lycopersicumL.) through soil. Both nS and cS increased root mass by 73% and 81% and increased shoot weight by 35% and 50%, respectively, compared to the untreated controls. Bulk sulfur (bS) and ionic sulfate (iS) had no such stimulatory effect. Notably, surface modification of S NPs had a positive impact, as cS yielded 38% and 51% greater shoot weight compared to nS at 100 and 200 mg/L, respectively. Moreover, nS and cS significantly improved leaf photosynthesis by promoting the linear electron flow, quantum yield of photosystem II, and relative chlorophyll content. The time-dependent gene expression related to two S bioassimilation and signaling pathways showed a specific role of NP surface physicochemical properties. Additionally, a time-dependent Global Test and machine learning strategy applied to understand the NP surface modification domain metabolomic profiling showed that cS increased the contents of IA, tryptophan, tomatidine, and scopoletin in plant leaves compared to the other treatments. These findings provide critical mechanistic insights into the use of nanoscale sulfur as a multifunctional soil amendment to enhance plant performance as part of nanoenabled agriculture.

Surface Modification of Mesoporous Silica Nanoparticles for Application in Targeted Delivery Systems of Antitumour Drugs.

The problem of tumour therapy has attracted the attention of many researchers for many decades. One of the promising strategies for the development of new dosage forms to improve oncology treatment efficacy and minimise side effects is the development of nanoparticle-based targeted transport systems for anticancer drugs. Among inorganic nanoparticles, mesoporous silica deserves special attention due to its outstanding surface properties and drug-loading capability. This review analyses the various factors affecting the cytotoxicity, cellular uptake, and biocompatibility of mesoporous silica nanoparticles (MSNs), constituting a key aspect in the development of safe and effective drug delivery systems. Special attention is paid to technological approaches to chemically modifying MSNs to alter their surface properties. The stimuli that regulate drug release from nanoparticles are also discussed, contributing to the effective control of the delivery process in the body. The findings emphasise the importance of modifying MSNs with different surface functional groups, bio-recognisable molecules, and polymers for their potential use in anticancer drug delivery systems.