Nail Insertion Point Research Articles

Progress of anterior subcutaneous internal fixation in the treatment of anterior pelvic ring injury

Anterior subcutaneous internal fixation (INFIX) is one of the current representatives of minimally invasive fixation of injuries to the anterior pelvic ring. The nail insertion point of this technique is located at the anterior inferior iliac spinous screw, with an angle of 30° outward and 20° backward. Screw in at an angle, and note that the screw head should be above the deep fascia and maintain a safe distance of 20 to 25 mm from the bone surface. Its improved versions include 3 or 4 nails INFIX with added pubic tubercle screws, unilateral INFIX, short-rod INFIX, and double INFIX. These improvements further enhance stability. The lateral femoral cutaneous nerve (LFCN) is relatively easy to be damaged during anatomy, so special attention should be paid during the operation. Biomechanical stability has advantages over external fixation, and its application is flexible. It is not limited to pubic ramus fracture, symphyseal separation, etc. It also plays an important role in combined anterior and posterior ring fixation. It can be combined with posterior sacroiliac screws, iliac lumbar screws, etc. Fixed etc. Good clinical results have also been reported in children, pregnant women, and people with contraindications for subcutaneous connecting rods. In addition, the current application of robots, reduction frames and other technologies has greatly reduced the difficulty of reduction and improved the quality of closed reduction, making it possible to fix complex pelvic fracture. This technique has high reduction quality and is as effective as traditional steel plates. A common complication is LFCN injury. Careful exposure and adjustment of the position and depth of internal fixation during surgery can effectively avoid this complication.

Biomechanical Consequences of Nail Insertion Point and Anterior Cortical Perforation for Antegrade Femoral Nailing.

This biomechanical study assessed the influence of changing antegrade cephalomedullary nail insertion point from anterior to neutral to posterior locations relative to the tip of the greater trochanter with or without anterior cortical perforation in the distal femur. Artificial osteoporotic femurs and cephalomedullary nails were used to create 5 test groups each with 8 specimens: intact femur without a nail or perforation, anterior nail insertion point without perforation, neutral nail insertion point without perforation, posterior nail insertion point without perforation, and posterior nail insertion point with perforation. Nondestructive biomechanical tests were done at 250 N in axial, coronal 3-point bending, sagittal 3-point bending, and torsional loading in order to measure overall stiffness and bone stress. The intact femur group vs. all femur/nail groups had lower stiffness in all loading modes (p ≤ 0.018), as well as higher bone stress in the proximal femur (p ≤ 0.027) but not in the distal femur above the perforation (p = 0.096). Compared to each other, femur/nail groups only showed differences in sagittal 3-point bending stiffness for anterior and neutral vs. posterior nail insertion points without (p ≤ 0.025) and with perforation (p ≤ 0.047). Although it did not achieve statistical significance (p ≥ 0.096), moving the nail insertion point from anterior to neutral to posterior to posterior with perforation did gradually increase bone stress by 45% (proximal femur) and 46% (distal femur). No femur or hardware failures occurred. Moving the nail insertion point and the presence of a perforation had little effect on stiffness, but the increased bone stress may be important as a predictor of fracture. Based on current bone stress results, surgeons should use anterior or neutral nail insertion points to reduce the risk of anterior cortical perforation.

DETERMINATION OF THE EFFICACY OF SUPRAPATELLAR APPROACH FOR INTRAMEDULLARY NAILING OF PROXIMAL TIBIAL FRACTURES

Summary. The topicality of the research is predetermined by the high frequency of adverse functional results after PTF (proximal tibial fractures) treatment, like deforming osteoarthritis, contractures, knee joint instability developing fairly often in the distant period and occurring in 5.8% to 28% of cases; disability rate up to 5.9-9.1%. The mater of a traditional approach to an intramedullary nail insertion point versus the suprapatellar one for FPRTB intramedullary nailing is still under discussion. Objective: To specify the efficacy of suprapatellar approach for IM nailing in patients with PTF. Materials and methods: prospective and retrospective analysis of the efficiency of 30 PTF patients’ treatment at the clinic of the State Institution “ITO NAMN of Ukraine” and at the traumatology department of KNMP “Globinskaya CRН” within 2016-2017, using both suprapatellar and traditional accesses. Their outcomes have been evaluated after their fractures consolidation (1 year after the start of the treatment) according to the Neer-Grantham-Shelton scale. Results. The IM nailing from the suprapatellar access has shown itself to be the most efficient method for proximal tibial fractures management. The share of excellent results reached 60%, demonstrating statistically significant difference (p ≤ 0.01) from those of patients cured from a traditional access; there were only 20% of satisfactory results. No poor results were reported. Practical importance: the study proves the expediency of suprapatellar access in IM nailing of PTF and the need for wider implementation of the method within the territory of Ukraine. Conclusions. Considering the low injury rate and ensuring potentially better bone fragments reposition, the suprapatellar access in IM nailing is the most efficient method for PTF management.

Is there a bone-nail specific entry point? Automated fit quantification of tibial nail designs during the insertion for six different nail entry points

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors.The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP.The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit.The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position.

Influence of Nail Prominence and Insertion Point on Anterior Knee Pain After Tibial Intramedullary Nailing

Chronic anterior knee pain is the most common complication after tibial nail insertion. Its etiology remains unknown, and multifactorial sources have been suggested. The authors believe that nail prominence and the insertion point of the nail are important in the development of anterior knee pain. The purpose of this retrospective study was to evaluate the roles of the insertion point and nail prominence in anterior knee pain after tibial intramedullary nailing using a transtendinous approach and a common nail type. A total of 108 patients with tibial shaft fractures underwent reamed intramedullary nailing using a transtendinous approach between 2006 and 2009. Mean follow-up was 26.8±5.0 months. A visual analog scale (0-100) was used to estimate anterior knee pain severity while patients performed 7 activities retrospectively. Radiographic assessments, including nail prominence and insertion point, were performed. Sixty (55.6%) patients experienced knee pain (group P) and 48 (44.4%) did not (group N). Significant differences were not found between the groups with respect to demographics, nail diameters, or fracture classifications. Less superior and more anterior nail prominences in radiographic assessments were significantly associated with anterior knee pain. When the insertion point was over the bottom half of the anterior cortex, the influence of anterior nail prominence was more obvious. Nail removal resulted in diminished pain during the 7 assessed activities. Nail insertion should be over the bottom half of the anterior cortex, with minimal anterior nail prominence. If anterior knee pain occurs, removal of the nail should be considered.

Ideal Tibial Intramedullary Nail Insertion Point Varies With Tibial Rotation

The aim of the study was to investigate how superior entry point varies with tibial rotation and to identify landmarks that can be used to identify suitable radiographs for successful intramedullary nail insertion. The proximal tibia and knee were imaged for 12 cadaveric limbs undergoing 5° increments of internal and external rotation. Medial and lateral arthrotomies were performed, the ideal superior entry point was identified, and a 2-mm Kirschner wire inserted. A second Kirschner wire was sequentially placed at the 5-mm and then the 10-mm position, both medial and lateral to the initial Kirschner wire. Radiographs of the knee were obtained for all increments. The changing position of the ideal nail insertion point was recorded. A 30° arc (range, 25°-40°) provided a suitable anteroposterior radiograph. On the neutral anteroposterior radiograph, the Kirschner wire was 54% ± 1.5% (range, 51-56%) from the medial edge of the tibial plateau. For every 5° of rotation, the Kirschner wire moved 3% of the plateau width. During external rotation, a misleading medial entry point was obtained. A fibular bisector line correlated with an entry point that was ideal or up to 5 mm lateral to this but never medial. The film that best showed the fibular bisector line was between 0° and 10° of internal rotation of the tibia. The fibula head bisector line can be used to avoid choosing external rotation views and, thus, avoid medial insertion points. The current results may help the surgeon prevent malalignment during intramedullary nailing in proximal tibial fractures.

All-arthroscopic intramedullary nailing of 2- and 3-part proximal humeral fractures: a new arthroscopic technique and preliminary results

The most criticism of antegrade humeral nailing is the potentially deleterious effect on the shoulder function, which is caused by the trauma to the M. supraspinatus (SSP) at the nail insertion site. We describe a new technique of all-arthroscopical intramedullary nailing, which preserves the rotator cuff, and compare it with the conventional open procedure. From 11/2009 to 12/2010 82 patients with unstable, displaced proximal humeral fractures were treated surgically. Twenty-one of these patients received an intramedullary nailing. Sixteen of 21 met the inclusion criteria. Based on the surgeon's arthroscopic experience, patients were assigned to the arthroscopic (group I, n = 8) or open group (group II, n = 8). Both groups were compared due to the replacement results, complications, time of surgery and fluoroscopy. Concomitant intraarticular pathologies were assessed (group I). First clinical results after a median follow-up of 13 months (group I) and 14 months (group II) were reported. Between group I and II, no significant differences were seen in patients age [77 years (range 45-90 years) vs. 76 years (range 65-92 years)], gender (6 female/2 male vs. 5 female/3 male) and fracture pattern (six 2-/two 3-part fractures vs. five 2-/three 3-part fractures). The reduction was evaluated by the caput-diaphysis-angle, which was median 137° (range 120-147°) in group I and 132° (range 120-158°) in group II (p = 0.959). Postoperatively, group I showed one varus-, group II two varus- and valgus deformities. Median time of surgery was 75 min (range 45-182 min) versus 70 min (range 40-146 min) (p = 0.442), fluoroscopy time 1.5 min (range, 0.6-3.7 min) versus 1.2 min (range 0.3-2.2 min) in group I and II (p = 0.336). Concomitant pathologies like one traumatic bicipital tendon-lesion and three partial lesions of the SSP were observed and treated in group I. Constant Scores and Visual Analogue Scale did not differ significantly between both groups at the time of follow-up. All-arthroscopical humeral nailing is possible, preserves the rotator cuff and provides equal replacement and functional results like the open technique. An arthroscopically visualized optimal nail insertion point provides less frequent head deformities. Level of evidence Level III.

Closed, Locked Intramedullary Nailing of Pediatric Femoral Shaft Fractures Through the Tip of the Greater Trochanter

Closed femoral nailing is universally accepted as the treatment of choice in almost all diaphyseal femoral fractures in adults. Numerous authors reported favorable results applying the same surgical technique in the adolescent patient group. Nevertheless, reports of complications such as avascular necrosis and alteration of the proximal femoral anatomy have dampened the initial enthusiasm. The purpose of this paper was to evaluate the possible effect of closed intramedullary nailing through the greater trochanter on the proximal femoral anatomy. We report the results of intramedullary nailing in 20 skeletally immature patients (13 men and 7 women) with a mean age of 14.4 years (range, 11-16 years). All were treated with closed, reamed, percutaneously performed nailing, using the tip of the greater trochanter as the nail insertion point. The patients were followed for 29 months in average (range, 19-37 months). No major complication (limb length discrepancy, avascular necrosis, coxa valga) occurred during the observation period. All fractures healed clinically and radiographically within 9 weeks in average (8-13 weeks) and all patients returned to the preinjury activity level. The mean ATD difference was 1.10 +/- 3.51 (range, -5-7 mm, 95% CI -0,54/2,74, p = 0.177). The mean LTA distance difference was 0.3 mm (range, -6-5 mm, p = 0.158), the mean femoral length difference was 1.9 mm (-9-12 mm, p = 0.122) and the overall limb length difference was 1.4 mm (-25-20 mm, p = 0.178). The mean neck-shaft angle difference was 0.20 +/- 1.74 (range, -3-4, p = 0.612) and the mean neck width was 0.60 +/- 1.50 (range, -3-3, p = 0.09). Fourteen nails (70%) were removed within 13 months in average (range, 10-18 months) without any complications. This study showed that with strict adherence to a surgical technique that respects the growing proximal femur and its vascular anatomy, using the tip of the greater trochanter as an entry point to the femoral canal, the proven advantages of closed, intramedullary nailing can safely be offered to the adolescent patient population as well.