N-type Organic Semiconductors Research Articles

Determination of the Electronic Structure, Charge-transfer, and Optical Properties of Neutral, Anionic, and Cationic Perfluoropentacene

Perfluoropentacene ( is an n-type organic semiconductor made by fluorination of p-type semiconductor Pentacene and can find applications in molecular thin film devices. In this work, a theoretical study of Perfluoropentacene was carried out based on density functional theory (DFT) and time dependent (TD-DFT) as implemented in Gaussian 09 package using B3LYP/6-311++G (d, p) and B3LYP/6-31+G(d) basis sets. The electronic, charge transfer, Linear and nonlinear optical properties of the molecule were calculated and reported for the neutral, anionic, and cationic forms of the molecule. The results show that the cationic state of the molecule has the strongest bond length at R(28,32) using the basis sets B3LYP/6-311++G (d,p) and the weakest bond length was found at R(4,6) in the ionic state with 6-31+G (d) basis set. The energy gap obtained for the neutral molecule using 6-31+G (d) and 6-311++G (d,p) basis sets are 2.00eV, 1.99eV respectively. The results show a strong agreement with a previously related work that reported the energy gap as 2.02eV thus indicating high stability of the molecule. Perfluoropentacene has the highest value of chemical hardness of 1.3929eV in its anionic state (Beta MO), so is considered to be harder and more stable than the neutral and cationic. The findings also revealed that with toluene as solvent, the strongest absorption was found at wavelength of 738.38, highest oscillator strength of 0.0599 and the lowest excitation energy of 1.6791eV. The calculated results of polarizability, first and second hyperpolarizability confirm that this molecule is a good non-linear optical material. On the whole, the molecule could be a good material for optoelectronic applications.

Synthesis and Characterization of Octacyano-Cu-Phthalocyanine.

Octacyano-metal-substituted phthalocyanine MPc(CN)8 is a promising n-type stable organic semiconductor material with eight cyano groups, including a strong electron-withdrawing group at its molecular terminals. However, most MPc(CN)8 have not been thoroughly investigated. Therefore, CuPc(CN)8 was synthesized in this study and its crystal structure, chemical and electronic states, thermal stability, and electrical properties were investigated. This article discusses the various properties of CuPc(CN)8, as compared to those of CuPc and FePc(CN)8. The previously reported FePc(CN)8 is an organic semiconductor molecule with a molecular structure similar to that of CuPc(CN)8. X-ray diffraction (XRD) measurements revealed that CuPc(CN)8 has a crystalline structure in the P1̅ space group. The crystal structure forms an in-plane network parallel to the molecular plane through multiple hydrogen bonds by the cyano groups at the molecular terminals. Interestingly, the crystal structure, especially the molecular stacking, of CuPc(CN)8 differs from that of FePc(CN)8. The absorption edge observed in the ultraviolet-visible spectrum of CuPc(CN)8 shifted to a longer wavelength than that of CuPc, which was attributed to the energy gap of CuPc(CN)8 being smaller than that of CuPc owing to the influence of the cyano groups at the molecular terminals, according to the molecular orbital calculation results using density functional theory. Ultraviolet photoelectron spectroscopy measurements confirmed that CuPc(CN)8 had a stronger n-type character than CuPc because of the orbital energy stabilization by the cyano groups. Thermogravimetry/differential thermal analysis measurements revealed that the thermal stability of CuPc(CN)8 was significantly higher than that of FePc(CN)8. CuPc(CN)8 exhibited photoconduction upon visible-light irradiation, and its electrical conductivity was higher than that of CuPc, which was attributed to a reduction in the electron injection barrier at the electrode interfaces.

Vitamin C stabilizes n-type organic semiconductors.

Vitamin C stabilizes n-type organic semiconductors.

Fully-Fused Indacenodithiophene-Centered Small Molecule n-Type Semiconductors for High-Performance Organic Electronics.

Developing novel n-type organic semiconductors is an enduring research endeavour, given their pivotal roles in organic electronics and their relative scarcity compared to p-type counterparts. In this study, a new strategy was employed to synthesize n-type organic semiconductors featuring fully-fused conjugated backbone. By attaching two sets of adjacent amino and formyl groups to the indacenodithiophene-based central cores and triggering a tandem reaction of Knoevenagel condensation-intramolecular cyclization, DFA1 and DFA2 were realized. The solution-processed organic field effect transistors based on DFA1 exhibited unipolar n-type transport character with a decent electron mobility of ca. 0.10 cm2 V-1 s-1 (ca. 0.038 cm2 V-1 s-1 for DFA2 based devices). When employing DFA1 as a third component in organic solar cells, a high power conversion efficiency of 19.2% can be achieved in ternary devices fabricated with PM6:L8-BO:DFA1. This work paves a new pathway in the molecular engineering of n-type organic semiconductors, propelling relevant research forward.

Improving both performance and stability of n-type organic semiconductors by vitamin C.

Organic semiconductors (OSCs) are one of the most promising candidates for flexible, wearable and large-area electronics. However, the development of n-type OSCs has been severely held back due to the poor stability of their most candidates, that is, the intrinsically high reactivity of negatively charged polarons to oxygen and water. Here we demonstrate a general strategy based on vitamin C to stabilize n-type OSCs, remarkably improving the performance and stability of their device, for example, organic field-effect transistors. Vitamin C scavenges reactive oxygen species and inhibits their generation by sacrificial oxidation and non-sacrificial triplet quenching in a cascade process, which not only lastingly prevents molecular structure from oxidation damage but also passivates the latent electron traps to stabilize electron transport. This study presents a way to overcome the long-standing stability problem of n-type OSCs and devices.

A bioinspired neuromuscular system enabled by flexible electro-optical N2200 nanowire synaptic transistor

Mimicking the functional traits of the muscle system evolves the development of the neuromorphic prosthetic limbs. Herein, a bioinspired neuromuscular system was constructed by connecting an information processor that uses a flexible electro-optical synaptic transistor (FNST) to an effector that uses artificial muscle fibers. In this system, the response of artificial muscle fibers, which imitate the movement of biological muscle fibers, is manipulated by neuromorphic synaptic devices. The FNST is regulated by light pulses and electrical spikes to emulate biological synaptic functions, and thereby applied in secure communication. The feasibility of n-type organic nanowires acting as the channels for neuromorphic devices was demonstrated. Attributing to the flexibility of the n-type organic semiconductor N2200 nanowires, the current of the FNST retains >85% of its initial value after the 5000 bending cycles to radius = 1 cm. The tolerance of bending of the FNST implies its potential applications in wearable electronics. This work offers an approach to potentially advancing electronic skin, neuro-controlled robots, and neuromorphic prosthetic limbs.

Strong Acceptors Based on Derivatives of Benzothiadiazoloimidazole.

Despite the rapid progression of organic semiconductors, developing high-air-stability n-type organic semiconductors are still challenging. Herein, novel strong acceptors based on benzothiadiazoloimidazole units are reported. The results reveal that the strong acceptor BTI-NDI-BTI-a has good solubility and high electron affinity (3.94 eV), accompanied by 1D slipped-stacking crystals. Notably, the material presents promising potential for developing into air-stable n-type organic semiconductor materials.

Exciton Delocalization and Polarizability in Perylenetetracarboxylic Diimide Probed Using Electroabsorption and Fluorescence Spectroscopies.

Perylenetetracarboxylic diimide (PTCDI) is an n-type organic semiconductor molecule that has been widely utilized in numerous applications such as photocatalysis and field-effect transistors. Polarizability and dipole moment, which are inherent properties of molecules, are important parameters that determine their responses to external electric and optical fields, physical properties, and reactivity. These parameters are fundamentally important for the design of innovative materials. In this study, the effects of external electric fields on absorption and fluorescence spectra were investigated to obtain the PTCDI parameters. The PTCDI substituted by an octyl group (N,N'-Dioctyl-3,4,9,10-perylenedicarboximide) dispersed in a polymethyl methacrylate (PMMA) matrix was studied in this work. The features of vibronic progression in the absorption spectrum were analogous to those observed in solution. The red shift of the absorption band caused by the Stark effect was mainly observed in the presence of an external electric field. Changes in parameters such as the dipole moment and polarizability between the ground and the Franck-Condon excited states of the PTCDI monomer were determined. The fluorescence spectrum shows a contribution from a broad fluorescence band at wavelengths longer than the monomer fluorescence band. This broad fluorescence is ascribed to the excimer-like fluorescence of PTCDI. The effects of the electric field on the fluorescence spectrum, known as the Stark fluorescence or electrofluorescence spectrum, were measured. Fluorescence quenching is observed in the presence of an external electric field. The change in the polarizability of the monomer fluorescence band is in good agreement with that of the electroabsorption spectrum. A larger change in the polarizability was observed for the excimer-like fluorescence band than that for the monomer band. This result is consistent with exciton delocalization between PTCDI molecules in the excimer-like state.

Ring Fusion Elevates the Electronic Mobility of Azabenzannulated Perylene Diimide.

The backwardness of n-type organic semiconductors still exists compared with the p-type counterparts. Thus, the development of high-performance n-type organic semiconductors is of great importance for organic electronic devices and their integrated circuits. In recent years, azabenzannulated perylene diimide (PDI), as one of immense bay-region-annulated PDI derivatives, has drawn considerable attentions. However, the electronic mobilities of azabenzannulated PDI derivatives are barely satisfactory. In this contribution, the peripheral benzene ring in azabenzannulated PDI 2 was fused to the ortho position by intramolecular C-H arylation cyclization. This endows the resultant azabenzannulated PDI 4 a planar configuration as well as electron deficient pentagonal ring. As a result, the electronic mobility of 4 is almost two orders of magnitude higher than that of the nonfused azabenzannulated PDI 2. This work shall pave a new avenue in elevating the performance of azabenzannulated PDI in organic electronics.

Enhancing the Maturation of Human Pluripotent Stem Cell-Derived Cardiomyocytes with an n-Type Organic Semiconductor Coating.

Human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) are a promising cell source for cardiac regenerative medicine and in vitro modeling. However, hPSC-CMs exhibit immature structural and functional properties compared with adult cardiomyocytes. Various electrical, mechanical, and biochemical cues have been applied to enhance hPSC-CM maturation but with limited success. In this work, we investigated the potential application of the semiconducting polymer poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)) as a light-sensitive material to stimulate hPSC-CMs optically. Our results indicated that P(NDI2OD-T2)-mediated photostimulation caused cell damage at irradiances applied long-term above 36 μW/mm2 and did not regulate cardiac monolayer beating (after maturation) at higher intensities applied in a transient fashion. However, we discovered that the cells grown on P(NDI2OD-T2)-coated substrates showed significantly enhanced expression of cardiomyocyte maturation markers in the absence of a light exposure stimulus. A combination of techniques, such as atomic force microscopy, scanning electron microscopy, and quartz crystal microbalance with dissipation monitoring, which we applied to investigate the interface of the cell with the n-type coating, revealed that P(NDI2OD-T2) impacted the nanostructure, adsorption, and viscoelasticity of the Matrigel coating used as a cell adhesion promoter matrix. This modified cellular microenvironment promoted the expression of cardiomyocyte maturation markers related to contraction, calcium handling, metabolism, and conduction. Overall, our findings demonstrate that conjugated polymers such as P(NDI2OD-T2) can be used as passive coatings to direct stem cell fate through interfacial engineering of cell growth substrates.

Axially Chiral Organic Semiconductors for Visible-Blind UV-Selective Circularly Polarized Light Detection.

Technologies that detect circularly polarized light (CPL), particularly in the UV region, have significant potential for various applications, including bioimaging and optical communication. However, a major challenge in directly sensing CPL arises from the conflicting requirements of planar structures for efficient charge transport and distorted structures for effective interaction with CPL. Here, a novel design of an axially chiral n-type organic semiconductor is presented to surmount the challenge, in which a binaphthyl group results in a high dissymmetry factor at the molecular level, while maintaining excellent electron-transporting characteristics through the naphthalene diimide group. Experimental and computational methods reveal different stacking behaviors in homochiral and heterochiral assemblies, yielding different structures: Nanowires and nanoparticles, respectively. Especially, the homochiral assemblies exhibit effective π-π stacking between naphthalene diimides despite axial chirality. Thus, phototransistors fabricated using enantiomers exhibit a high maximum electron mobility of 0.22 cm2 V-1 s-1 and a detectivity of 3.9 ×1012 Jones, alongside the CPL distinguishing ability with a dissymmetry factor of responsivity of 0.05. Furthermore, the material possesses a wide bandgap, contributing to its excellent visible-blind UV-selective detection. These findings highlight the new strategy for compact CPL detectors, coupled with the demonstration of less-explored n-type and UV region phototransistors.

Sensitive short-wavelength infrared photodetection with a quinoidal ultralow band-gap n-type organic semiconductor

Sensitive short-wavelength infrared photodetection with a quinoidal ultralow band-gap n-type organic semiconductor

Engineered solid-state aggregates in brickwork stacks of n-type organic semiconductors: a way to achieve high electron mobility

Superior supramolecular packing and thereby efficient electron transport in economically viable n-type organic semiconductor materials suitable for solution-processed OFET devices yield high electron mobility and ambient stability.

Quinoidal π-extension of dipyranylidene derivatives: towards efficient dopants for n-type organic semiconductors

Quinoidal π-extended dipyranylidene derivatives, 2,2',6,6'-tetraphenyl-2,2'-p-quinobis(4,4'-dipyranylidene) (DP8) and its tetrakis(dimethylamino) derivative (DP9), were newly synthesized and characterized. DP8, with the HOMO energy level (EHOMO) of −4.2 eV, was isolated as a...

Narcissistic self-sorting in Zn(II) porphyrin derived semiconducting nanostructures.

The narcissistic self-sorted phenomenon is explicitly attributed to the structural similarities in organic molecules. Although such relevant materials are rarely explored, self-sorted structures from macrocyclic π-conjugated-based p- and n-type organic semiconductors facilitate the increase of exciton dissociation and charge separation in bulk heterojunction solar cells. Herein, we report two extended π-conjugated derivatives consisting of zinc-porphyrin-linked benzothiadiazole acting as an acceptor (PB) and anthracene as a donor (PA). Despite having the same porphyrin π-conjugated core in PA and PB, variations in donor and acceptor moieties make the molecular packing form one-dimensional (1D) self-assembled nanofibers via H- and J-type aggregates. Interestingly, a dissimilar aggregate of PA and PB exists as a mixture (PA + PB), promoting narcissistic self-sorted structures. Electrochemical impedance investigation reveals that the electronic characteristics of self-sorting assemblies are influenced by the difference in electrostatic potentials for PA and PB, resulting in a transitional electrical conductivity of 0.14 S cm-1. Therefore, the design of such materials for the fabrication of effective photovoltaics is promoted by these extraordinary self-sorted behaviors in comparable organic π-conjugated molecules.

N-Type Fullerene-Carbon Dots: Synthesis and Electrochemical and Photophysical Properties.

The covalent incorporation of C60 and C70 derivatives of the well-known n-type organic semiconductor PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) onto carbon dots (CD) is described. Morphological and structural characterization reveal combined features of both pristine starting materials (CD and PCBM). Electrochemical investigations evidenced the existence of additional reduction processes to that of CD or PCBM precursors, showing rich electron-acceptor capabilities, with multistep processes in an affordable and narrow electrochemical window (ca. 1.5 V). Electronic communication in the obtained nanoconjugated species were derived from steady-state absorption and emission spectroscopies, which showed bathochromically shifted absorptions and emissions well entering the red region. Finally, the lower fluorescence quantum yield of CD-PCBM nanoconjugates, compared with CD, and the fast decay of the observed emission of CD, support the existence of an electronic communication between both CD and PCBM units in the excited state.

Polyfluorinated Naphthalene-bis-hydrazimide for Solution-Grown n-Type Semiconducting Films.

Naphthalene tetracarboxylic diimides (NDIs), possessing low-lying and tunable LUMO levels, are of wide interest for their aptitude to provide cost-effective, flexible, and environmentally stable n-type organic semiconductors through simple solution processing. NDI-based aromatic hydrazidimides are herein studied in relation to their chemical and environmental stability and as spin-coated stable thin films. In the case of the pentafluorinated residue, these were found to be crystalline, highly oriented, and molecularly flat (roughness = 0.3 nm), based on optical and atomic force microscopy, X-ray diffraction in specular and grazing incidence geometry, and X-ray reflectivity measurements. A new polymorph, previously undetected during the isolation of bulk powders or in their controlled thermal treatments, is found in the thin film and was metrically and structurally characterized from 2D GIWAXS patterns (monoclinic, P2/c, a = 17.50; b = 4.56; c = 14.24 Å; β = 84.8°). This new thin-film phase, TF-F5, is formed no matter whether silicon, glass, or polymethylmethacrylate substrates are used, thus opening the way to the preparation of solution-grown flexible semiconducting films. The TF-F5 films exhibit a systematic and rigorous molecular alignment with both orientation and packing favorable to electron mobility (μ = 0.02 cm2 V-1 s-1). Structural and morphological differences are deemed responsible for the absence of measurable conductivity in thin films of polyfluorinated analogues bearing -CF3 residues on the hydrazidimide aromatic rings.

Predicting the miniaturization limit of vertical organic field effect transistor (VOFET) with perforated graphene as a source electrode

Vertical organic field effect transistors (VOFETs) are of paramount importance due to their fast switching speed, low power consumption, and higher density on a chip compared to lateral OFETs. The low charge carrier mobility in organic semiconductors and longer channel lengths in lateral OFETs lead to higher operating voltages. The channel length in VOFETs can be less than 100 nm which reduces the size of the channel and hence the operating voltages. Another important factor in the operation of VOFETs is the thickness and width of the source electrode. The channel length, source electrode thickness and width sets the miniaturization limit of the VOFETs. The graphene monolayer can be exploited as a source electrode due to its thinness, high carrier mobility, and metallic behaviors. However, for better gate modulation, perforations in the source material are desired. Here, we simulate the VOFET having perforated graphene monolayer as a source electrode and n-type organic semiconductor N, N′-dioctyl-3,4,9,10-perylenedicarboximide (PTCDI-C8) as an active channel material, while aluminum as a drain electrode to predict the best-miniaturized device. The miniaturization limit of such a VOFET has a limit to the gate opening/perforation in which the minimum source width is 10 nm, as in the sub 10 nm range graphene starts behaving like a semiconductor. The subthreshold swing, deduced from the drain current (J D) versus gate voltage (V G) graph, advocates the limit of the organic semiconductor height/channel length to 50 nm, while 50 nm for the gate.

Efficient Photocatalytic Cleavage of Lignin Models by a Soluble Perylene Diimide/Carbon Nitride S-Scheme Heterojunction.

3,4,9,10-Perylenetetracarboxylic dianhydride (PDI) is one of the best n-type organic semiconductors and an ideal light-driven catalyst for lignin depolymerization. However, the charge localization effect and the excessively strong intermolecular aggregation trend in PDI result in rapid electron-hole (e- -h+ ) recombination, which limits photocatalytic performance. Herein, polymeric carbon nitride/polyhedral oligomeric silsesquioxane PDI (p-CN/P-PDI) S-scheme heterojunction photocatalyst was prepared by the solvent evaporation-deposition method for C-C bond selective cleavage of lignin β-O-4 model. Based on the material characterization results, the synergic role of polyhedral oligomeric silsesquioxane (POSS) and S-scheme heterojunction maintains appropriate aggregation domains, achieves better solar light utilization, faster charge-transfer efficiency, and greater redox capacity. Notably, the 3 % p-CN/P-PDI heterostructure exhibits a remarkable enhancement in cleavage conversion efficiency, achieving approximately 16.42 and 2.57 times higher conversion rates compared to polyhedral oligomeric silsesquioxane modified PDI (POSS-PDI) and polymeric carbon nitride (p-CN), respectively.

Asymmetrically Functionalized Electron-Deficient π-Conjugated System for Printed Single-Crystalline Organic Electronics.

Large-area single-crystalline thin films of n-type organic semiconductors (OSCs) fabricated via solution-processed techniques are urgently demanded for high-end electronics. However, the lack of molecular designs that concomitantly offer excellent charge-carrier transport, solution-processability, and chemical/thermal robustness for n-type OSCs limits the understanding of fundamental charge-transport properties and impedes the realization of large-area electronics. The benzo[de]isoquinolino[1,8-gh]quinolinetetracarboxylic diimide (BQQDI) π-electron system with phenethyl substituents (PhC2 -BQQDI) demonstrates high electron mobility and robustness but its strong aggregation results in unsatisfactory solubility and solution-processability. In this work, an asymmetric molecular design approach is reported that harnesses the favorable charge transport of PhC2 -BQQDI, while introducing alkyl chains to improve the solubility and solution-processability. An effective synthetic strategy is developed to obtain the target asymmetric BQQDI (PhC2 -BQQDI-Cn ). Interestingly, linear alkyl chains of PhC2 -BQQDI-Cn (n = 5-7) exhibit an unusual molecular mimicry geometry with a gauche conformation and resilience to dynamic disorders. Asymmetric PhC2 -BQQDI-C5 demonstrates excellent electron mobility and centimeter-scale continuous single-crystalline thin films, which are two orders of magnitude larger than that of PhC2 -BQQDI, allowing for the investigation ofelectron transport anisotropy and applicable electronics.