N-acetyl Heparosan Research Articles

Metabolic engineering of non-pathogenic Escherichia coli strains for the controlled production of low molecular weight heparosan and size-specific heparosan oligosaccharides

BackgroundHeparin, a lifesaving blood thinner used in over 100 million surgical procedures worldwide annually, is currently isolated from over 700 million pigs and ~200 million cattle in slaughterhouses worldwide. Though animal-derived heparin has been in use over eight decades, it is a complex mixture that poses a risk for chemical adulteration, and its availability is highly vulnerable. Therefore, there is an urgent need in devising bioengineering approaches for the production of heparin polymers, especially low molecular weight heparin (LMWH), and thus, relying less on animal sources. One of the main challenges, however, is the rapid, cost-effective production of low molecular weight heparosan, a precursor of LMWH and size-defined heparosan oligosaccharides. Another challenge is N-sulfation of N-acetyl heparosan oligosaccharides efficiently, an essential modification required for subsequent enzymatic modifications, though chemical and enzymatic N-sulfation is effectively performed at the polymer level. MethodsTo devise a strategy to produce low molecular weight heparosan and heparosan oligosaccharides, several non-pathogenic E. coli strains are engineered by transforming the essential heparosan biosynthetic genes with or without the eliminase gene (elmA) from pathogenic E. coli K5. ResultsThe metabolically engineered non-pathogenic strains are shown to produce ~5 kDa heparosan, a precursor for low molecular weight heparin, for the first time. Additionally, heparosan oligosaccharides of specific sizes ranging from tetrasaccharide to dodecasaccharide are directly generated, in a single step, from the recombinant bacterial strains that carry both heparosan biosynthetic genes and the eliminase gene. Various modifications, such as chemical N-sulfation of N-acetyl heparosan hexasaccharide following the selective protection of reducing end GlcNAc residue, enzymatic C5-epimerization of N-sulfo heparosan tetrasaccharide and complete 6-O sulfation of N-sulfo heparosan hexasaccharide, are shown to be feasible. ConclusionsWe engineered non-pathogenic E. coli strains to produce low molecular weight heparosan and a range of size-specific heparosan oligosaccharides in a controlled manner through modulating culture conditions. We have also shown various chemical and enzymatic modifications of heparosan oligosaccharides. General significanceHeparosan is a precursor of heparin and the methods to produce low molecular weight heparosan is widely awaited. The methods described herein are promising and will pave the way for potential large scale production of low molecular weight heparin anticoagulants and bioactive heparin oligosaccharides in the coming decade.

Immobilized enzymes to convert N-sulfo, N-acetyl heparosan to a critical intermediate in the production of bioengineered heparin

Heparin is a critically important anticoagulant drug that is prepared from pig intestine. In 2007–2008, there was a crisis in the heparin market when the raw material was adulterated with the toxic polysaccharide, oversulfated chondroitin sulfate, which was associated with 100 deaths in the U.S. alone. As the result of this crisis, our laboratory and others have been actively pursuing alternative sources for this critical drug, including synthetic heparins and bioengineered heparin. In assessing the bioengineering processing costs it has become clear that the use of both enzyme-catalyzed cofactor recycling and enzyme immobilization will be needed for commercialization. In the current study, we examine the use of immobilization of C5-epimerase and 2-O-sulfotransferase involved in the first enzymatic step in the bioengineered heparin process, as well as arylsulfotransferase-IV involved in cofactor recycling in all three enzymatic steps. We report the successful immobilization of all three enzymes and their use in converting N-sulfo, N-acetyl heparosan into N-sulfo, N-acetyl 2-O-sulfo heparin.

Response surface optimization of the heparosan N-deacetylation in producing bioengineered heparin

The chemical step in the chemoenzymatic synthesis of bioengineered heparin has been examined and optimized statistically using a response surface methodology. A four factor, two level full factorial design experiment and a three factor Box-Behnken design were carried out. The goal was to establish a method to prepare N-sulfo, N-acetyl heparosan of the desired N-acetyl content, number average molecular weight, and in maximum yield by controlling the reactant concentrations, reaction time and reaction temperature. The response surface models obtained were used to predict the reaction conditions required to optimally prepare N-sulfo, N-acetyl heparosan from Escherichia coli generated heparosan starting material of different molecular weights.

Escherichia coli K5 heparosan fermentation and improvement by genetic engineering

N-acetyl heparosan is the precursor for the biosynthesis of the important anticoagulant drug heparin. The E. coli K5 capsular heparosan polysaccharide provides a promising precursor for in vitro chemoenzymatic production of bioengineered heparin. This article explores the improvements of heparosan production for bioengineered heparin by fermentation process engineering and genetic engineering.

Tandem MS Can Distinguish Hyaluronic Acid from N-Acetylheparosan

Isobaric oligosaccharides enzymatically prepared from hyaluronic acid (HA) and N-acetylheparosan (NAH), were distinguished using tandem mass spectrometry. The only difference between the two series of oligosaccharides was the linkage pattern (in HA 1-->3 and in NAH 1-->4) between glucuronic acid and N-acetylglucosamine residues. Tandem mass spectrometry afforded spectra in which glycosidic cleavage fragment ions were observed for both HA and NAH oligosaccharides. Cross-ring cleavage ions 0,2An and 0,2An-h (n is even number) were observed only in GlcNAc residues of NAH oligosaccharides. One exception was an 0,2A2 ion fragment observed for the disaccharide from HA. These cross-ring cleavage fragment ions are useful to definitively distinguish HA and NAH oligosaccharides.

Systematic identification of N‐acetylheparosan oligosaccharides by tandem mass spectrometric fragmentation

Recently, a useful procedure for the preparation of both even- and odd-numbered series of N-acetylheparosan (NAH) oligosaccharides was established. The present report describes findings when these NAH oligosaccharides were subjected to comparative mass spectrometry (MS)/MS fragmentation analysis by matrix-assisted laser desorption/ionization (MALDI)-LIFT-time-of-flight (TOF)/TOF-MS/MS, and electrospray ionization (ESI) collision-induced dissociation (CID) MS/MS. The resultant fragment ions were systematically assigned to elucidate fragmentation characteristics. In the MALDI-LIFT-MS/MS experiments, all the NAH oligosaccharides underwent unique glycosidic cleavages that included B-Y ion cleavages (nomenclature system of Domon and Costello, Glycoconjugate J. 1988; 5: 397) at the C-1 side, and C-Z ion cleavages at the C-4 side, with respect to glucuronic acid (GlcA). In addition, (0,2)A and/or (0,2)X cross-ring cleavages were observed for relatively small oligosaccharides. The former observation clearly reflects the occurrence of a GlcA-N-acetylglucosamine (GlcNAc) alternating structure of NAH, while the latter feature implies the occurrence of the -beta-1-4-glucuronide linkage. Extensive glycosidic cleavages were also observed in the ESI-CID-MS/MS fragmentation, though cleavage specificity was less evident than in the case of MALDI-LIFT-TOF/TOF-MS/MS. The information obtained in this study should be valuable for understanding both biosynthetic and degradation processes of NAH and its derivatives including heparin and heparan sulfate, as well as artificially modified NAH oligosaccharides.

Microscale preparation of even- and odd-numbered N-acetylheparosan oligosaccharides

In order to prepare a series of N-acetylheparosan (NAH)-related oligosaccharides, bacterial NAH produced in Escherichia coli strain K5 was partially depolymerized with heparitinase I into a mixture of even-numbered NAH oligosaccharides, having an unsaturated uronic acid (ΔUA) at the non-reducing end. A mixture of odd-numbered oligosaccharides was derived by removing this ΔUA in the aforementioned mixture by a ‘trimming’ reaction using mercury(II) acetate. Each oligosaccharide mixture was subjected to gel-filtration chromatography to generate a series of size-uniform NAH oligosaccharides of satisfactory purity (assessed by analytical anion-exchange HPLC), and their structures were identified by MALDITOF-MS, ESIMS, and 1H NMR analysis. As a result, a microscale preparation of a series of both even- and odd-numbered NAH oligosaccharides was achieved for the first time. The developed procedure is simple and systematic, and thus, should be valuable for providing not only research tools for heparin/heparan sulfate-specific enzymes and their binding proteins, but also precursor substrates with medical applications.

Biotechnological Engineering of Heparin/Heparan Sulphate: A Novel Area of Multi-Target Drug Discovery

Heparin is a sulphated glycosaminoglycan currently used as an anticoagulant and antithrombotic drug. It consists largely of 2-O-sulphated IdoA not l&r arrow N, 6-O-disulphated GlcN disaccharide units. Other disaccharides containing unsulphated IdoA or GlcA and N-sulphated or N-acetylated GlcN are also present as minor components. This heterogeneity is more pronounced in heparan sulphate (HS), where the low-sulphated disaccharides are the most abundant. Heparin/HS bind to a variety of biologically active polypeptides, including enzymes, growth factors and cytokines, and viral proteins. This capacity can be exploited to design multi-target heparin/HS-derived drugs for pharmacological interventions in a variety of pathologic conditions besides coagulation and thrombosis, including neoplasia and viral infection. The capsular K5 polysaccharide from Escherichia coli has the same structure as the heparin precursor N-acetyl heparosan. The possibility of producing K5 polysaccharide derivatives by chemical and enzymatic modifications, thus generating heparin/HS-like compounds, has been demonstrated. These K5 polysaccharide derivatives are endowed with different biological properties, including anticoagulant/antithrombotic, antineoplastic, and anti-AIDS activities. Here, the literature data are discussed and the possible therapeutic implications for this novel class of multi-target "biotechnological heparin/HS" molecules are outlined.

Production of N-sulfated polysaccharides using yeast-expressed N-deacetylase/N-sulfotransferase-1 (NDST-1).

Heparan sulfate/heparin N-deacetylase/N-sulfotransferase-1 (NDST-1) is a critical enzyme involved in heparan sulfate/heparin biosynthesis. This dual-function enzyme modifies the GlcNAc-GlcA disaccharide repeating sugar backbone to make N-sulfated heparosan. N-sulfation is an absolute requirement for the subsequent epimerization and O-sulfation steps in heparan sulfate/heparin biosynthesis. We have expressed rat liver (r) NDST-1 in Saccharomyces cerevisiae as a soluble protein. The yeast-expressed enzyme has both N-deacetylase and N-sulfotransferase activities. N-acetyl heparosan, isolated from Escherichia coli K5 polysaccharide, de-N-sulfated heparin (DNSH) and completely desulfated N-acetylated heparan sulfate (CDSNAcHS) are all good substrates for the rNDST-1. However, N-desulfated, N-acetylated heparin (NDSNAcH) is a poor substrate. The rNDST-1 was partially purified on heparin Sepharose CL-6B. Purified rNDST-1 requires Mn(2+) for its enzymatic activity, can utilize PAPS regenerated in vitro by the PAPS cycle (PAP plus para-nitrophenylsulfate in the presence of arylsulfotransferase IV), and with the addition of exogenous PAPS is capable of producing 60-65% N-sulfated heparosan from E. coli K5 polysaccharide or Pasteurella multocida polysaccharide.

Chemical derivatization as a strategy to study structure-activity relationships of glycosaminoglycans.

Sulfated glycosaminoglycans (GAGs) are amenable to a number of chemical modifications that modulate their biological activity. N-sulfate groups can be exposed and N-acylated (usually N-acetylated), specific O-sulfate groups can be removed, and free hydroxyl groups (either preexisting in the original GAG or exposed by desulfation) can be sulfated. Heparin/heparan sulfate, chondroitin sulfate, and dermatan sulfate have been variously desulfated or sulfated to afford novel GAGs with protein binding and associated biological properties different from those of the original GAGs. Regiospecific sulfation of N-acetyl heparosan ( E. coli K5 polysaccharide) afforded a number of derivatives, some endowed with antithrombotic activity and others with antimetastatic properties. Most of the activities could be correlated with typical sulfation patterns along each GAG backbone. Glycol splitting of nonsulfated glucuronic residues (including a critical residue in the pentasaccharide sequence of the active site for antithrombin) leads to substantial loss of anticoagulant activity of heparin. Partial removal of sulfate groups at position 2 of iduronic acid residues followed by glycol splitting of all nonsulfated uronic acid residues afforded nonanticoagulant, antiangiogenic heparins.

5480800 DNA fragment carrying the gene encoding the enzyme for fragmenting N-acetylheparosan and the adjacent sequences permitting its expression, recombinant enzyme intended for fragmenting N-acetylhep arosan and its use : Legoux Richard; Lelong Philippe; SalomeMarc L V Le Saget, France assigned to Sanofi

5480800 DNA fragment carrying the gene encoding the enzyme for fragmenting N-acetylheparosan and the adjacent sequences permitting its expression, recombinant enzyme intended for fragmenting N-acetylhep arosan and its use : Legoux Richard; Lelong Philippe; SalomeMarc L V Le Saget, France assigned to Sanofi