Multispecies Biofilm Research Articles

The Effect of Xanthohumol and Thymol on Candida albicans Filamentation and Its Impact on the Structure, Size, and Cell Viability of Biofilms Developed over Implant Surfaces

The aim of this in vitro study was to evaluate the effect of xanthohumol and thymol on the impact of Candida albicans on the structure, size and cell viability of subgingival biofilms formed on dental implant surfaces. The structure and microbial biomass of biofilms developed after 72 h, treated and untreated with both extracts, were compared by scanning electron microscopy (SEM) and confocal laser microscopy (CLSM). Quantitative polymerase chain reaction (qPCR) was used to quantify the number of viable and total microorganisms of each of the biofilm-forming strains in each condition. A general linear model was used to compare and validate the CLSM and qPCR results. The presence of xanthohumol and thymol during biofilm development inhibited the filamentous growth of C. albicans. The biofilm incubated with xanthohumol had significantly lower bacterial biomass and cell viability than the biofilm not exposed to the extract (p < 0.05). In contrast, these global parameters showed no differences when the biofilm was incubated with thymol. In the presence of xanthohumol, there was a decrease in counts and cell viability of Fusobacterium nucleatum, Porphyromonas gingivalis, and Aggregatibacter actinomycetemcomitans. Thymol treatment reduced the viability of F. nucleatum and P. gingivalis. The presence of these vegetable extracts during the development of a dynamic in vitro multispecies biofilm model inhibited the filamentous growth of C. albicans, partially reversing the effect that the fungus exerted on the structure, size and vitality of periodontopathogenic bacteria.

Determining conditions for inactivation of multispecies biofilm cells by peracetic acid applying response surface methodology

Biofilms can form on various surfaces and are typically associated with multiple microbial species. Particularly in the food industry, biofilms are often a source of contamination, necessitating mitigation strategies. In this study, Response Surface Methodology (RSM) was utilized to optimize conditions for the inactivation of multispecies biofilm cells, with peracetic acid (PAA) (0.05% to 0.5%), treatment time (5 to 30 minutes), and temperature (25 to 60 ºC) as independent variables. The multispecies biofilm consisted of Gram-positive and Gram-negative bacteria previously isolated from biofilms formed in the presence of raw milk. Stainless steel (SS) coupons were immersed in reconstituted whole milk inoculated with Pseudomonas fluorescens, Rahnella inusitata, Staphylococcus aureus, and Micrococcus aloeverae. Sessile cell counts of approximately 108 CFU/cm2 were obtained after 10 days of incubation at 4 ºC. The response surface model exhibited a good fit, with R2 of 0.949 and adjR2 of 0.883. All independent variables had a positive effect on the inactivation of biofilm cells. The maximum inactivation achieved was approximately 7 log (CFU/cm2), with the highest values observed at 0.5% PAA, for 30 min at 60°C. Epifluorescence microscopy revealed that many cells in the biofilm were dead or injured after treatment at the central point (PAA = 0.275%; Time = 17.5 min; Temperature = 42.5 ºC). RSM helps to predict better conditions for maximum biofilm eradication and proves to be a promising approach for monitoring the inactivation of multispecies biofilm cells, which warrants further exploration.

The battle against dental caries: defeating biofilm formed by bacterial isolates using vanillin and plant essential oils: in vitro and ex vivo approaches

BackgroundInfections caused by biofilm-forming bacteria have significantly linked to dental plaque and caries. The aim of this study is to assess efficacy of some natural compounds in inhibition and eradication of biofilm formed by bacterial isolates from dental infections.ResultsBacterial isolates were recovered from dental plaque/caries and identified using standard microbiological tests and 16S rDNA sequencing. The isolated bacterial strains include Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, Klebsiella pneumoniae, and Escherichia coli. The antibiotic susceptibility was determined by disk diffusion method and revealed that the majority of isolates showed high antibiotic resistance, and 61% of isolates were found to be multidrug resistant. The biofilm formation capacity of isolates was investigated using microtiter plate assay. Among the 77 bacterial isolates, seventeen showed moderate biofilm formation capacity, twenty-two showed near-moderate, thirty-four had weak biofilm-forming capacity, and four were non-biofilm producers. The antibiofilm activity of tested compounds (rose and jasmine oils, propolis, vanillin, and vinegar) was evaluated against isolates with highest biofilm-forming capacity. The in vitro antibiofilm ability of tested substances were investigated alone or in combination with each other to evaluate their ability to prevent biofilm formation or destroy preformed single-/multispecies biofilms. Finally, antibiofilm ability of tested combination was evaluated ex vivo on natural teeth. Our results showed that vanillin in combination with rose or jasmine oils showed promising biofilm inhibition and biofilm eradication activities in both the in vitro and ex vivo models.ConclusionsDental plaque and caries can be successfully prevented using combination of vanillin with rose or jasmine oils, and these compounds can be incorporated in new anticaries dental formulations.

The Biofilm Removal and Bactericidal Effect of an 810-nm High-Power Laser on an Orthodontic Bracket Surface: An In Vitro Study.

Objective: The present study aimed to analyze the biofilm removal and bactericidal effect of laser treatment alone and laser combined with ultrasonic scaling on orthodontic brackets. It also assessed whether the use of a laser can improve the efficiency of biofilm removal and bactericidal effect compared with traditional ultrasonic instrumentation. Background Data: Streptococcus mutans (S. mutans) can lead to white spots and dental caries. Orthodontic brackets make teeth cleaning more difficult, and biofilms or bacteria on the surface of brackets worsen the oral environment, which may cause some oral diseases. Laser can be used for biofilm removal and killing bacteria on the surface of an object through thermal, photochemical, and pressure effects, which is widely used in the treatment of oral diseases. Methods: A total of 600 mandibular incisor brackets were collected for this study. Among these, 320 unused brackets were used for the S. mutans crystal violet assay (n = 160) and for S. mutans live/dead bacterial staining (n = 160). Another 280 brackets, obtained from patients who had undergone therapy for over two years, were used for the mature multispecies biofilms removal assay (n = 120) and multispecies bacterial live/dead bacterial staining (n = 160). Ultrasonic scaling, laser, and laser combined with ultrasonic scaling were applied to the labial surface of brackets covered by S. mutans biofilm or mature multispecies biofilms. Specifically, we used the following three methods: ultrasonic scaling for 10 sec without laser; 810-nm laser (Doctor Smile, Italy, LA5D0 001.1) with 0.3-mm spot size at total 21.2 kJ/cm2 for 10 sec; and 810-nm laser at total 10.6 kJ/cm2 for 5 sec, followed by ultrasonic scaling for 5 sec. The 810-nm diode laser removed biofilms with a power of 1.5 W and a power density of 2.12 kW/cm2. The S. mutans biofilm was examined using crystal violet assay, and scanning electron microscopy (SEM) was used for mature multispecies biofilms to evaluate the effect of the three methods on biofilm removal. Live/dead bacterial staining was used to examine the bactericidal effect on remaining biofilms by confocal laser scanning microscopy (CLSM). Results: For S. mutans biofilm, the optical density (OD) value and live/dead bacterial ratio in the laser and the laser combined with ultrasonic scaling groups were significantly lower than those in the ultrasonic scaling group (p < 0.05); moreover, the OD value and the live/dead bacterial ratio in laser treatment combined with ultrasonic scaling and laser treatment alone showed no significant difference (p > 0.05). For mature multispecies biofilms, the percentage of biofilm coverage after treatment was higher in the laser group than in the ultrasonic scaling group (p < 0.05) and lower in the laser combined with ultrasonic scaling group than in the ultrasonic scaling group (p < 0.05), and live/dead bacterial staining showed that laser treatment alone killed the most bacteria, followed by laser treatment combined with ultrasonic scaling, while ultrasonic scaling alone seldom killed bacteria. Conclusions: Laser treatment alone has a better bactericidal effect and can also remove more S. mutans biofilm than ultrasonic scaling alone, but it fails to remove more mature multispecies biofilms. Laser treatment combined with ultrasonic scaling can remove more S. mutans biofilm and mature multispecies biofilms than ultrasonic scaling alone and also has a better bactericidal effect than ultrasonic scaling alone on a bracket surface.

Effects of i-PRF, A-PRF+, and EMD on Osteogenic Potential of Osteoblasts on Titanium.

The study evaluates three biologically active substances with known bone-inductive potential on previously decontaminated titanium (Ti) discs. Rough and smooth Ti surfaces were contaminated with a multispecies biofilm and cleaned with a chitosan brush. Discs were treated either with injectable-platelet-rich fibrin (i-PRF), advanced platelet-rich fibrin (A-PRF+), or enamel matrix derivatives (EMDs) before osteoblast seeding. Biocompatibility, adhesion, migration, and gene expression of runt-related transcription factor 2 (RUNX2), collagen Type I Alpha 2 (COL1a2), alkaline phosphatase (ALP), osteocalcin (OC), and osteonectin (ON) were performed. All the tested biologic agents similarly increased cell viability. Specifically, osteoblasts seeded over i-PRF and EMD-treated surfaces showed improvement in adhesion and migration and significantly increased ALP, OC, ON, RUNX-2, and COL1a2 mRNA levels up to 2.8 fold (p < 0.05) with no differences between Ti surfaces. i-PRF and EMD possess beneficial bioactive properties that enhance tissue healing and promote regeneration on thoroughly sterilized surfaces. Biologically active materials may hold the potential to influence the process of implant re-osseointegration, which warrants more research since sterilization of the affected surfaces under clinical conditions is still not reliably possible and remains one of the greatest challenges.

Antibacterial Effects of Black Cumin Seed Oil on Oral Microcosm Biofilms.

Interest in natural extracts for managing oral biofilms is increasing, with black cumin seed oil (BCSO) demonstrating efficacy against Streptococcus mutans. The effectiveness of antibacterial agents should be evaluated using multi-species oral biofilm models that closely mimic actual conditions. This study aimed to compare the antibacterial effects of BCSO and chlorhexidine gluconate (CHX) on oral microcosm biofilms. Biofilms using human saliva as the inoculum were cultured for 2 days and subsequently treated with 0.5% dimethyl sulfoxide, 0.5% BCSO, or 0.12% CHX once daily for 6 days. Following treatment, the red fluorescence intensity (RatioR/G) of the oral biofilm; biomass, including extracellular polymeric substance (EPS) levels and live bacteria counts; and colony-forming units (CFUs) of aciduric bacteria were evaluated. RatioR/G after BCSO treatment (1.26 ± 0.03) was not significantly different from that after CHX treatment (p = 0.552). The EPS levels were also not significantly different between the two groups (p = 0.743). The live bacteria count was 0.55 times lower in the BCSO-treated group than in the CHX-treated group (p = 0.018). No significant between-group difference was observed in the CFUs of aciduric bacteria (p = 0.935). These results suggest that BCSO exhibits antibacterial effects similar to those of CHX, highlighting its potential as an effective alternative.

The Decontamination Effect of an Oscillating Chitosan Brush Compared With an Ultrasonic PEEK-Tip: An InVitro Study Using a Dynamic Biofilm Model.

This study aimed to assess the effect of an oscillating chitosan brush (OCB) compared with an ultrasonic device with PEEK tip (US-PEEK) for mechanical implant surface decontamination using an invitro model combining 3D models and a validated dynamic multispecies biofilm. A multispecies biofilm using six bacterial strains (Streptococcus oralis, Veillonella parvula, Actinomyces naeslundii, Fusobacterium nucleatum, Porphyromonas gingivalis, and Aggregatibacter actinomycetemcomitans) was seeded on dental implants with machined and sandblasted, large-grit and acid-etched (SLA) surfaces. These were installed in 3D models depicting peri-implant defect. Mechanical decontamination was performed for 120 s using either an OCB or a US-PEEK. A negative control group received no treatment. Scanning electron microscopy (SEM) was used to evaluate the bacterial composition and quantitative PCR (qPCR) analyzed the number of each bacterial species [colony-forming units per milliliter (CFU/mL)]. Well-structured biofilms with a dense microbial distribution were observed on the negative control implants after 72 h. qPCR following mechanical decontamination showed a scarce bacterial reduction in the OCB group. The US-PEEK group exhibited a significant decrease in bacterial species compared to both OCB and control groups (p < 0.05). A biofilm removal effect was also observed in the OCB group for the machined implant surfaces. In vitro assessment using an anatomical 3D model showed that mechanical decontamination effectively reduced biofilm. The US-PEEK group demonstrated biofilm reduction on the SLA surface, while the OCB group showed a reduction on the machined implant surface. Additionally, the US-PEEK group demonstrated greater efficacy in reducing bacterial numbers.

Dynamics of drinking water biofilm formation associated with Legionella spp. colonization.

Understanding how Legionella spp. proliferate in multispecies biofilms is essential to develop strategies to control their presence in building plumbing. Here, we analyzed biofilm formation and Legionella spp. colonization on new plumbing material during 8 weeks. Biofilm formation was characterized by an initial increase in intact cell concentrations up to 9.5 × 105 cells/cm2, followed by a steady decrease. We identified Comamonas, Caulobacter, Schlegella, Blastomonas and Methyloversatilis as pioneer genera in the biofilm formation process. Importantly, L. pneumophila was the dominant Legionella spp. and rapidly colonized the biofilms, with culturable cell concentrations peaking at 3.1 × 104 MPN/cm2 after 4 weeks already. Moreover, several Legionella species co-occurred and had distinct dynamics of biofilm colonization. Vermamoeba vermiformis (V. vermiformis) was the dominant protist identified with 18S rRNA gene amplicon sequencing. Together our results highlight that biofilm formation upon introduction of new building plumbing material is a dynamic process where pathogenic Legionella species can be part of the earliest colonizers.

The efficacy of antimicrobial solutions against multispecies bacterial biofilm with or without negative pressure wound therapy in an in vitro wound model.

Biofilm is the major challenge in chronic wound management. Instilling a wound cleansing solution aids in wound bed cleaning and infectious pathogen elimination. Negative pressure wound therapy (NPWT) improves the wound-healing process. This study investigated the efficacy of two antimicrobials (Vashe Wound Cleanser and Prontosan Wound Irrigation Solution) against a multispecies bacterial biofilm with or without NPWT in an in vitro wound model. A mixed multispecies biofilm containing Staphylococcus aureus, Pseudomonas aeruginosa, Streptococcus pyogenes, and Acinetobacter baumannii was developed and verified by scanning electron microscopy and fluorescent in situ hybridization. The efficacy of Vashe and Prontosan against multispecies biofilm with or without NPWT was evaluated by colony-forming unit (cfu) of each species and total bacterial number, and visually confirmed by live/dead stain and confocal microscopy. Prontosan reduced biofilm cell numbers significantly: 6 instils over 24 h resulting in 3.86 ± 0.14 cfu log10 reduction without NPWT and 4.75 ± 0.13 cfu log10 reduction combined with NPWT (P < 0.01) and 12 instils over 48 h resulting in 5.24 ± 0.11 cfu log10 reduction without NPWT and biofilm eradication with NPWT (P < 0.001). NPWT alone or combined with Vashe failed to reduce multispecies biofilm numbers significantly over 24 or 48 h. Prontosan significantly reduced biofilm cell numbers, with better efficacy over 48 than 24 h, emphasizing the necessity for persistent and robust treatment. NPWT enhanced the effectiveness of Prontosan instillation. However, NPWT alone or combined with Vashe showed limited efficacy and difficulty when combating the multispecies biofilm in vitro.

Antibiofilm activity of Morganella morganii JB8F and Pseudomonas fluorescens JB3B compound to control single and multi-species of aquaculture pathogens

BackgroundIndonesia is a country that uses half or more aquatic foods as protein intake. The increased production in aquaculture industries might cause several problems, such as bacterial disease resulting in mass mortality and economic losses. Antibiotics are no longer effective because aquaculture pathogens can form biofilm. Biofilm is a microbial community that aggregates and firmly attaches to living or non-living surfaces. Biofilm formation can be caused by environmental stress, the presence of antibiotics, and limited nutrients. Therefore, it is important to explore antibiofilm to inhibit biofilm formation and/or eradicate mature biofilm. Phyllosphere bacteria can produce bioactive compounds for antimicrobial, antibiofilm, and anti-quorum sensing. Three aquaculture pathogens were used in this study, such as Aeromonas hydrophila, Streptococcus agalactiae, and Vibrio harveyi.ResultsPseudomonas fluorescens JB3B and Morganella morganii JB8F extracts could disrupt single and multi-species biofilms. Both extracts could inhibit single biofilm formation from one to seven days of incubation time. We confirmed the destruction activity on multi-species biofilm using light microscope and scanning electron microscope. Using GC-MS analysis, indole was the most active fraction of the P. fluorescens JB3B extracts and octacosane from the M. morganii JB8F extract. We also conducted a toxicity test using brine shrimp lethality assay on P. fluorescens JB3B and M. morganii JB8F extracts. P. fluorescens JB3B, M. morganii JB8F, and a mixture of both extracts were confirmed non-toxic according to the LC50 value of the brine shrimp lethality test.ConclusionsP. fluorescens JB3B and M. morganii JB8F phyllosphere extracts had antibiofilm activity to inhibit single biofilm and disrupt single and multi-species biofilm of aquaculture pathogens. Both extracts could inhibit single species biofilm until seven days of incubation. Bioactive compounds that might contribute to antibiofilm properties were found in both extracts, such as indole and phenol. P. fluorescens JB3B, M. morganii JB8F extracts, and mixture of both extracts were non-toxic against Artemia salina.

Effect of &lt;i&gt;Staphylococcus aureus&lt;/i&gt; Cell-Free Culture Liquid on the Structure and Biochemical Composition of &lt;i&gt;Klebsiella pneumoniae&lt;/i&gt; and &lt;i&gt;Pseudomonas aeruginosa&lt;/i&gt; Biofilms

Recently acquired data suggest that many infections are associated with formation of multispecies biofilms, in which both antibiotic sensitivity and the permeability of the extracellular matrix differ from those of monocultures. In this work, we show that addition of cell-free culture liquid of Staphylococcus aureus to the biofilms of Klebsiella pneumoniae and Pseudomonas aeruginosa increased the content of α- and β-polysaccharides in the matrix up to twofold, which in turn probably affected the biofilm structure. Increased content of the polysaccharide component was also confirmed by a significantly increased expression of the K. pneumoniae pgaA gene and of the P. aeruginosa pelA and pslA genes in the presence of S. aureus culture liquid.

Enhancing Removable Partial Dentures Hygiene: Investigating Mucolytic Agents and Biocides for Disrupting Biofilms and Improving Antimicrobial Efficacy.

This study evaluates the antibiofilm action of 2.5 mg/mL peracetic acid (PA), 0.5 mg/mL cetylpyridinium chloride (CPC), and 160 mg/mL N-Acetylcysteine (NAC) against multispecies biofilm of Streptococcus mutans, Staphylococcus aureus, Candida albicans, and Candida glabrata, developed on surfaces of heat-polymerizing acrylic resin (AR) and cobaltchromium (Co-Cr) alloy. A multispecies biofilm was grown on the surface of AR and Co-Cr specimens (Ø 12×3mm). After biofilm maturation, the specimens were immersed in experimental solutions and evaluated through biofilm viability (CFU) (n&#61;9), biofilm metabolic activity (XTT) (n&#61;9), biofilm-covered areas (Live/Dead) (n&#61;2), effects on the extracellular polymeric substance (EPS) (n&#61;2) and biofilm morphology (n&#61;1). Data were analyzed by ANOVA and the Tukey post-test or Kruskal-Wallis followed by the Dunn post-test (α&#61;.05). Overall, all evaluated solutions impacted biofilm viability. PA presented wider activity by reducing CFU of all microorganisms on both surfaces, XTT (P<.001) and Live/Dead (P<.001). NAC had a notorious effect in reducing the viability of bacteria without affecting the yeasts. NAC reduced XTT on AR (P&#61;.006) and Co-Cr (P&#61;.003) but did not reduce the aggregated biofilm layer. CPC had distinct effect according to the surface, being most effective in reducing CFU on AR than the Co-Cr surface. However, it did not influence XTT, and the amount of residual aggregated biofilm. PA provided the greatest antibiofilm action, while CPC and NAC showed intermediate action. Nonetheless, no solution was able to completely remove the biofilm adhered to the surfaces of heat-polymerizing AR and Co-Cr alloy.

Coaggregation dynamics in drinking water biofilms and implications for chlorine disinfection

Biofilms in drinking water (DW) systems persistently challenge traditional disinfection methods due to intricate microbial interactions, with coaggregation playing a crucial role in forming multispecies biofilms. This study examined the implications of coaggregation on tolerance towards sodium hypochlorite (NaOCl) disinfection. Dual-species biofilms were formed for seven days on polyvinyl chloride coupons, comprising a strain of the emerging pathogen Stenotrophomonas maltophilia and the coaggregating strain Delftia acidovorans 005 P. For comparison, dual-species biofilms were also formed with a non-coaggregation strain (D. acidovorans 009 P). The minimum bactericidal concentration (MBC) for each planktonic strain varied (D. acidovorans: 1 mg/L, S. maltophilia: 1.5 mg/L) below the safe DW treatment limits. However, high NaOCl doses (10 ×MBC and 100 ×MBC,) showed low efficacy against dual-species biofilms, indicating significant biofilm tolerance to disinfection. Membrane damage occurred at sub-MBC without culturability loss, underscoring biofilm resilience. The biofilm analysis revealed a complex interplay between the composition of extracellular polymeric substances and the architecture, which was influenced by the presence of the coaggregating strain. Overall, coaggregation significantly influenced biofilm formation and resilience, impacting NaOCl disinfection. These findings underscore the challenges of microbial interactions in biofilms, emphasizing the need for improved disinfection strategies to control biofilms in drinking water systems.

Reduction of Multispecies Biofilms on an Acrylic Denture Base Model by Antimicrobial Photodynamic Therapy Mediated by Natural Photosensitizers.

The aim of this study is to investigate the antimicrobial efficacy of antimicrobial photodynamic therapy (PDT) using natural photosensitizers (curcumin, riboflavin, and phycocyanin) and light-emitting diode (LED) irradiation against multispecies biofilms in an acrylic denture base model. Forty-five acrylic specimens were fabricated using heat-curing acrylic resin. The specimens were then infected with a mixed culture of bacterial and fungal species (including Streptococcus mutans, Streptococcus sanguinis, Candida albicans, and Candida glabrata) for 4 days. The acrylic discs were divided into nine groups, with each group containing five discs: control, 0.2% chlorhexidine, 5.25% sodium hypochlorite, curcumin, riboflavin, phycocyanin alone or along with LED. After treatment, the number of colony-forming units (CFUs) per milliliter was counted. In addition, the extent of biofilm degradation was assessed using the crystal violet staining method and scanning electron microscopy. All experimental groups exhibited a significant reduction in colony numbers for both bacterial and fungal species compared to the control (p < 0.001). The PDT groups exhibited a statistically significant reduction in colony counts for both bacteria and fungi compared to the photosensitizer-only groups. The results of this in vitro study show that PDT with natural photosensitizers and LED devices can effectively reduce the viability and eradicate the biofilm of microorganisms responsible for causing denture infections.

Inhibitory effect of helium cold atmospheric plasma on cariogenic biofilms

ABSTRACT This study aimed to determine the effects of low-temperature plasma jet produced in gas helium (LTP-helium) on cariogenic biofilms composedby Streptococcusmutans, Streptococcus sanguinis and Streptococcus gordonii, and also by the combination of Candida albicans, Lactobacillus acidophilus and S. mutans. Biofilms were treated for 1, 3, 5, and 7 minutes. A 0.12% chlorhexidine solution was used as the positive control and sterile physiologic solution was the negative control. Biofilm viability was analyzed by viable cell recovery, scanning electron microscopy, and confocal laser scanning microscopy. All assays were performed intriplicate in three independent experiments. Multispecies biofilms exposed to LTP-helium had a significant reduction in viability when compared to the negative control (p < 0.0001). For biofilm formedby S. mutans, S. sanguinis, and S. gordonii, LTP treatments for 5 and 7 minutes caused similar reduction of morethan 2 log10. Also, a significant reduction in the viability of biofilms formedby C. albicans, L. acidophilus, and S. mutans was detected (p < 0.0001). In conclusion, LTP-helium reduced theviability of cariogenic biofilms with different microbial compositions, which indicates that LTP-helium is a potential tool for developing new protocols for dental caries prevention and treatment.

Exploring the efficacy of in-vitro low-temperature plasma treatment on single and multispecies dental cariogenic biofilms

The primary aim of this study was to investigate the impact of treatment with low-temperature plasma (LTP) for varying exposure durations on a multispecies cariogenic biofilm comprising C. albicans, L. casei, and S. mutans, as well as on single-species biofilms of L. casei and C. albicans, cultured on hydroxyapatite discs. Biofilms were treated with LTP-argon at a 10 mm distance for 30 s, 60 s, and 120 s. Chlorhexidine solution (0.12%) and NaCl (0.89%) were used as positive (PC) and negative controls (NC), respectively. Argon flow only was also used as gas flow control (F). Colony-forming units (CFU) recovery and confocal laser scanning microscopy (CLSM) were used to analyze biofilm viability. LTP starting at 30 s of application significantly reduced the viability of multispecies biofilms by more than 2 log10 in all treated samples (p < 0.0001). For single-species biofilms, L. casei showed a significant reduction compared to PC and NC of over 1 log10 at all exposure times (p < 0.0001). In the case of C. albicans biofilms, LTP treatment compared to PC and NC resulted in a significant decrease in bacterial counts when applied for 60 and 120 s (1.55 and 1.90 log10 CFU/mL, respectively) (p < 0.0001). A significant effect (p ≤ 0.05) of LTP in single-species biofilms was observed to start at 60 s of LTP application compared to F, suggesting a time-dependent effect of LTP for the single-species biofilms of C. albicans and L. casei. LTP is a potential mechanism in treating dental caries by being an effective anti-biofilm therapy of both single and multispecies cariogenic biofilms.

Formation of Single-Species and Multispecies Biofilm by Isolates from Septic Transfusion Reactions in Platelet Bag Model.

During 2018-2021, eight septic transfusion reactions occurred from transfusion of platelet units contaminated with Acinetobacter spp., Staphylococcus saprophyticus, Leclercia adecarboxylata, or a combination of those environmental organisms. Whether biofilm formation contributed to evasion of bacterial risk mitigations, including bacterial culture, point-of-care testing, or pathogen-reduction technology, is unclear. We designed a 12-well plate-based method to evaluate environmental determinants of single-species and multispecies biofilm formation in platelets. We evaluated bacteria isolated from septic transfusion reactions for biofilm formation by using crystal violet staining and enumeration of adherent bacteria. Most combinations of bacteria had enhanced biofilm production compared with single bacteria. Combinations involving L. adecarboxylata had increased crystal violet biofilm production and adherent bacteria. This study demonstrates that transfusion-relevant bacteria can produce biofilms well together. More work is needed to clarify the effect of biofilms on platelet bacterial risk control strategies, but US Food and Drug Administration-recommended strategies remain acceptable.

Co-zorbs: Motile, multispecies biofilms aid transport of diverse bacterial species.

Biofilms are three-dimensional structures containing one or more bacterial species embedded in extracellular polymeric substances. Although most biofilms are stationary, Flavobacterium johnsoniae forms a motile spherical biofilm called a zorb, which is propelled by its base cells and contains a polysaccharide core. Here, we report formation of spatially organized, motile, multispecies biofilms, designated "co-zorbs," that are distinguished by a core-shell structure. F. johnsoniae forms zorbs whose cells collect other bacterial species and transport them to the zorb core, forming a co-zorb. Live imaging revealed that co-zorbs also form in zebrafish, thereby demonstrating a new type of bacterial movement in vivo. This discovery opens new avenues for understanding community behaviors, the role of biofilms in bulk bacterial transport, and collective strategies for microbial success in various environments.

Prevention of secondary caries using fluoride-loaded chitosan nanoparticle-modified glass-ionomer cement.

To study the effect of incorporating chitosan and fluoride-loaded chitosan nanoparticles into a glass-ionomer cement (GIC) to prevent secondary caries. A standard cervical cavity (mesio-distal width 6mm, cervico-occlusal width 2mm, and depth 2mm) was prepared on 30 molars for the following restoration groups: group 1, conventional GIC restoration; group 2, chitosan (10%) modified GIC restoration; group 3, fluoride loaded chitosan nanoparticles (10%) modified GIC restoration. The restored teeth were subjected to 1,500 thermal cycles before undergoing a multi-species cariogenic biofilm challenge. The restored teeth were examined by micro-computed tomography (micro-CT), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). Data were analyzed by the one-way ANOVA, Tukey HDS, Kruskal Wallis, and Dunn's test. Micro-CT determined outer lesion depths for groups 1-3 were: 614 ± 20μm, 589 ± 17μm, and 560 ± 19μm respectively. Both modifications with chitosan and fluoride-loaded chitosan nanoparticles significantly affected outer lesion depth (p < 0.05). The modification with fluoride-loaded chitosan nanoparticles statistically significantly decreased the outer lesion depth compared to all other groups (p < 0.05). SEM/EDX showed an increase of calcium, phosphorus, and fluoride at the root dentine adjacent to the restoration in groups 2 and 3 (modified GIC). This increase was statistically significantly higher in the group modified with fluorine-loaded nano chitosan particles compared to the other groups (p < 0.05). Incorporation of 10% chitosan and 10% fluoride-loaded chitosan nanoparticles into GIC restorative material can prevent secondary root caries development. 10% fluoride-loaded chitosan nanoparticles were more effective. Glass ionomer cement modified with fluoride-loaded chitosan nanoparticles may be a promising restorative material in pediatric and preventive dentistry due to their controlled release properties.

Effects of fluid shear stress on oral biofilm formation and composition and the transcriptional response of Streptococcus gordonii.

Biofilms are subjected to many environmental pressures that can influence community structure and physiology. In the oral cavity, and many other environments, biofilms are exposed to forces generated by fluid flow; however, our understanding of how oral biofilms respond to these forces remains limited. In this study, we developed a linear rocker model of fluid flow to study the impact of shear forces on Streptococcus gordonii and dental plaque-derived multispecies biofilms. We observed that as shear forces increased, S. gordonii biofilm biomass decreased. Reduced biomass was largely independent of overall bacterial growth. Transcriptome analysis of S. gordonii biofilms exposed to moderate levels of shear stress uncovered numerous genes with differential expression under shear. We also evaluated an ex vivo plaque biofilm exposed to fluid shear forces. Like S. gordonii, the plaque biofilm displayed decreased biomass as shear forces increased. Examination of plaque community composition revealed decreased diversity and compositional changes in the plaque biofilm exposed to shear. These studies help to elucidate the impact of fluid shear on oral bacteria and may be extended to other bacterial biofilm systems.