Multiple Redox Equivalents Research Articles

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids.

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Accumulation of Four Electrons on a Terphenyl (Bis)disulfide.

The activation of N2 , CO2 or H2 O to energy-rich products relies on multi-electron transfer reactions, and consequently it seems desirable to understand the basics of light-driven accumulation of multiple redox equivalents. Most of the previously reported molecular acceptors merely allow the storage of up to two electrons. We report on a terphenyl compound including two disulfide bridges, which undergoes four-electron reduction in two separate electrochemical steps, aided by a combination of potential compression and inversion. Under visible-light irradiation using the organic super-electron donor tetrakis(dimethylamino)ethylene, a cascade of light-induced reaction steps is observed, leading to the cleavage of both disulfide bonds. Whereas one of them undergoes extrusion of sulfur to result in a thiophene, the other disulfide is converted to a dithiolate. These insights seem relevant to enhance the current fundamental understanding of photochemical energy storage.

Multiple Proton-Coupled Electron Transfers at a Tricopper Cluster: Modeling the Reductive Regeneration Process in Multicopper Oxidases.

Metal clusters in enzymes carry out the life-sustaining reactions by accumulating multiple redox equivalents in a narrow potential range. This redox potential leveling effect commonly observed in Nature has yet to be reproduced with synthetic metal clusters. Herein, we employ a fully encapsulated synthetic tricopper complex to model the three-electron two-proton reductive regeneration of fully reduced trinuclear copper cluster CuICuICuI(μ2-OH2) (FR) from native intermediate CuIICuIICuII(μ3-O) (NI) in multicopper oxidases (MCOs). The tricopper cluster can access four oxidation states (I,I,I to II,II,II) and four protonation states ([Cu3(μ3-O)]LH, [Cu3(μ3-OH)]L, [Cu3(μ3-OH)]LH, and [Cu3(μ3-OH2)]L, where LH denotes the protonated ligand), allowing mechanistic investigation of proton-coupled electron transfer (PCET) relevant to MCOs. Seven tricopper complexes with discrete oxidation and protonation states were characterized with spectroscopy or X-ray single-crystal diffraction. A stepwise electron transfer-proton transfer (ET-PT) mechanism is established for the reduction of CuIICuIICuII(μ3-O)LH to CuIICuIICuI(μ3-OH)L, while a stepwise PT-ET mechanism is determined for the reduction of CuIICuICuI(μ3-OH)LH to CuICuICuI(μ2-OH2)L. The switch-over from ET-PT to PT-ET mechanism showcases that the tricopper complex can adopt different PCET mechanisms to circumvent high-barrier proton transfer steps. Overall, three-electron two-proton reduction occurs within a narrow potential range of 170 mV, exemplifying the redox potential leveling effect of secondary proton relays in delivering multiple redox equivalents at metal clusters.

Recent Advances and Perspectives in Photodriven Charge Accumulation in Molecular Compounds: A Mini Review.

The formation of so-called solar fuels from abundant low-energetic compounds, such as carbon dioxide or water, relies on the chemical elementary steps of photoinduced electron transfer and accumulation of multiple redox equivalents. The majority of molecular systems explored to date require sacrificial electron donors to accumulate multiple electrons on a single acceptor unit, but the use of high-energetic sacrificial redox reagents is unsustainable. In recent years, an increasing number of molecular compounds for reversible light-driven accumulation of redox equivalents that do not need sacrificial electron donors has been reported. Those compounds are the focus of this mini review. Different concepts, such as redox potential compression (achieved by proton-coupled electron transfer, Lewis acid–base interactions, or structural rearrangements), hybrids with inorganic nanoparticles, and diffusion-controlled multi-component systems, will be discussed. Newly developed strategies to outcompete unproductive reaction pathways in favor of desired photoproduct formation will be compared, and the importance of identifying reaction intermediates in the course of multiphotonic excitation by different time-resolved spectroscopic techniques will be discussed. The mechanistic insights gained from molecular donor–photosensitizer–acceptor compounds inform the design of next-generation charge accumulation systems for solar energy conversion.

Two-Electron-Two-Proton Transfer from Colloidal ZnO and TiO2 Nanoparticles to Molecular Substrates.

Transfers of multiple electrons and protons are challenging yet central to many energy-conversion processes and other chemical and biochemical reactions. Semiconducting oxides can hold multiple redox equivalents. This study describes the 2e-/2H+ transfer reactivity of photoreduced ZnO and TiO2 nanoparticle (NP) colloids with molecular 2e-/2H+ acceptors, to form new O-H, N-H, and C-H bonds. The reaction stoichiometries were monitored by NMR and optical spectroscopies. Faster 2e-/2H+ transfer rates were observed for substrates forming O-H or N-H bonds, presumably due to initial hydrogen bonding at the oxide surface. Chemically reduced ZnO NPs stabilized by Na+ or Ca2+ also engage in 2e-/2H+ transfer reactivity, showing that protons transferred in these processes are inherent to the oxide nanoparticles and do not exclusively stem from photoreduction. These results highlight the potential of ZnO and TiO2 for multiple proton-coupled electron transfer (PCET) reactions.

Single-chromophore single-molecule photocatalyst for the production of dihydrogen using low-energy light.

Single-chromophore single-molecule photocatalysts for the conversion and storage of solar energy into chemical bonds are rare, inefficient and do not use significant portions of the visible spectrum. Here we show a new, air-stable bimetallic scaffold that acts as a single-chromophore photocatalyst for hydrogen-gas generation and operates with irradiation wavelengths that span the ultraviolet to the red/near-infrared. Irradiation in acidic solutions that contain an electron donor results in the catalytic production of hydrogen with 170 ± 5 turnovers in 24 hours and an initial rate of 28 turnovers per hour. The catalysis proceeds through two stepwise excited-state redox events-atypical of the currently known homogeneous photocatalysis-and features the storage of multiple redox equivalents on a dirhodium catalyst enabled by low-energy light.

(Invited) Electronic Structures of Metal Centers in OER Catalyst Models and Electron/Energy Relays in the Excited State Supramolecular Dinuclear Transition Metal Complexes

Electronic Structures of Metal Centers in an OER Catalyst Model. One of the challenges in solar fuels generation is generating multiple redox equivalents for the oxygen evolution reaction (OER) (i.e., 2H2O→O2+4H++4e-) that is a four-electron, four-proton coupled process. Earth-abundant first-row transition metal oxides of cobalt, nickel, and their mixed-metal forms can drive this half-reaction at relatively low overpotentials. In collaboration with Nocera Group, we used a combination of in situ and ex situ X-ray absorption and emission spectroscopies as well as quantum mechanical calculations on OER thin films and their molecular and heterogeneous inorganic analogs. These studies provided insights into the electronic structures of the high-valent states involved in the mechanisms of O-O bond formation and for the high-valent states to drive the bond-forming and bond-breaking steps of OER reactions. Using a Co4O4 cluster as a model for the Co-based OER anode, CoPi, which has a similar topology and can host a stable, but electronically delocalized, mixed-valent Co(IV) state, we employed complementary X-ray spectroscopies, X-ray absorption (XAS) and 1s3p resonant inelastic X-ray scattering (Kβ RIXS), to effectively extract Co(IV) contributions within a spectroscopically active background (Figure 1). Co K- and L-edge X-ray absorption directly probe the 3d-manifold of effectively localized Co(IV), providing a handle on the covalency of the dπ-based redox active molecular orbital (MO) of Co4O4. Kβ RIXS is shown to be highly sensitive to metal cluster oxidation state and oxo-mediated metal-metal coupling in high-valent, delocalized mixed-valent species. We also probed the doubly oxidized Co(III)2(IV)2 state of the Co4O4 cluster, which features a cofacial Co(IV)2 site and is thus a molecular model of the active site in Co-OEC. Electron and Energy Relays in the Excited State Supramolecular Dinuclear Transition Metal Complexes. The rational design of multinuclear transition metal complexes (TMCs) for photochemical catalysis of homogeneous and/or heterogeneous multi-electron reactions (e.g. for producing solar fuels) requires a detailed understanding of the often unique and convoluted excited state charge and energy transfer dynamics in this class of compounds. Using combined optical and X-ray transient spectroscopic measurements, excited state electron electron relays in tetrapyridophenazine-bridged heteroleptic dinuclear Cu(I) bis(phenanthroline) complexes have been investigated as an exemplary system.

Harvesting multiple electron-hole pairs generated through plasmonic excitation of Au nanoparticles.

Multi-electron redox reactions, although central to artificial photosynthesis, are kinetically sluggish. Amidst the search for synthetic catalysts for such processes, plasmonic nanoparticles have been found to catalyse multi-electron reduction of CO2 under visible light. This example motivates the need for a general, insight-driven framework for plasmonic catalysis of such multi-electron chemistry. Here, we elucidate the principles underlying the extraction of multiple redox equivalents from a plasmonic photocatalyst. We measure the kinetics of electron harvesting from a gold nanoparticle photocatalyst as a function of photon flux. Our measurements, supported by theoretical modelling, reveal a regime where two-electron transfer from the excited gold nanoparticle becomes prevalent. Multiple electron harvesting becomes possible under continuous-wave, visible-light excitation of moderate intensity due to strong interband transitions in gold and electron-hole separation accomplished using a hole scavenger. These insights will help expand the utility of plasmonic photocatalysis beyond CO2 reduction to other challenging multi-electron, multi-proton transformations such as N2 fixation.

(Invited) Tetrapyrrole-Based Metal Complexes Designed for Bio-Inspired Catalysis and Solar Fuel Production

Light-induced substrate transformations in artificial photosynthetic devices and functional enzyme model systems strongly depend on the feasibility of multielectron transfer catalysis [1,2]. The crucial advantage of coupling multiple redox equivalents and proton transfer steps in photocatalysis is to avoid free radical reaction pathways and energetic constraints due to charge accumulation, as these processes can decrease both the long-term stability and the efficiency of the corresponding systems. In this context, certain coordination compounds including tetrapyrrole-based derivatives such as porphyrin, corrole and phthalocyanine complexes have been shown to achieve an efficient fusion of the complementary functions of a light-harvester, a photoredox interface, a substrate recognition site and a mediator for chemical reactions [3-6]. To further improve the performance of such systems, the design of long-term stable processes for artificial photosynthetic energy storage and green synthetic chemistry using artificial (photo)enzymes has to be achieved with sustainable, environmentally benign and earth-abundant bulding blocks. Another crucial aspect in the context of solar chemistry and catalysis is not only the requirement for using visible light, but also to shift the threshold wavelength of the photosensitizers as far as possible to the red and NIR-spectral regions. Some of our recent developments in this direction will be presented in this contribution. [1] G. Knör, Chem. Eur. J. 2009, 15, 568 [2] G. Knör, Coord. Chem. Rev. 2015, 304-305, 102 [3] M. Hajimohammadi, C. Schwarzinger, G. Knör, RSC Advances 2012, 2, 3257 [4] C. Uslan, K. T. Oppelt, L. M. Reith, B. Ş. Sesalan, G. Knör, Chem. Commun. 2013, 49, 8108 [5] K. T. Oppelt, E. Wöß, M. Stiftinger, W. Schöfberger, W. Buchberger, G. Knör, Inorg. Chem. 2013, 52, 11910 [6] M. Ertl, E. Wöß, G. Knör, Photochem. Photobiol. Sci. 2015, 14, 1826

Stabilising the lowest energy charge-separated state in a {metal chromophore - fullerene} assembly: a tuneable panchromatic absorbing donor-acceptor triad.

Photoreduction of fullerene and the consequent stabilisation of a charge-separated state in a donor-acceptor assembly have been achieved, overcoming the common problem of a fullerene-based triplet state being an energy sink that prevents charge-separation. A route to incorporate a C60-fullerene electron acceptor moiety into a catecholate-Pt(ii)-diimine photoactive dyad, which contains an unusually strong electron donor, 3,5-di-tert-butylcatecholate, has been developed. The synthetic methodology is based on the formation of the aldehyde functionalised bipyridine-Pt(ii)-3,5-di-tert-butylcatechol dyad which is then added to the fullerene cage via a Prato cycloaddition reaction. The resultant product is the first example of a fullerene-diimine-Pt-catecholate donor-acceptor triad, C60bpy-Pt-cat. The triad exhibits an intense solvatochromic absorption band in the visible region due to catechol-to-diimine charge-transfer, which, together with fullerene-based transitions, provides efficient and tuneable light harvesting of the majority of the UV/visible spectral range. Cyclic voltammetry, EPR and UV/vis/IR spectroelectrochemistry reveal redox behaviour with a wealth of reversible reduction and oxidation processes forming multiply charged species and storing multiple redox equivalents. Ultrafast transient absorption and time resolved infrared spectroscopy, supported by molecular modelling, reveal the formation of a charge-separated state [C60˙-bpy-Pt-cat˙+] with a lifetime of ∼890 ps. The formation of cat˙+ in the excited state is evidenced directly by characteristic absorption bands in the 400-500 nm region, while the formation of C60˙- was confirmed directly by time-resolved infrared spectroscopy, TRIR. An IR-spectroelectrochemical study of the mono-reduced building block (C60-bpy)PtCl2, revealed a characteristic C60˙- vibrational feature at 1530 cm-1, which was also detected in the TRIR spectra. This combination of experiments offers the first direct IR-identification of C60˙- species in solution, and paves the way towards the application of transient infrared spectroscopy to the study of light-induced charge-separation in C60-containing assemblies, as well as fullerene films and fullerene/polymer blends in various OPV devices. Identification of the unique vibrational signature of a C60-anion provides a new way to follow photoinduced processes in fullerene-containing assemblies by means of time-resolved vibrational spectroscopy, as demonstrated for the fullerene-transition metal chromophore assembly with the lowest energy charge-separated excited state.

Photoinduced Charge Accumulation in Molecular Systems.

Fuel-forming reactions such as CO2 reduction or water splitting require multiple redox equivalents. When aiming at light-driven production of energy-rich chemicals, nowadays often referred to as solar fuels, it therefore becomes important to master the photoinduced accumulation of electrons or holes on individual molecular components. Featured in this short review are some of the key molecular systems explored in this emerging field of research. This includes for example a trinuclear Ru(II)-Rh(III)-Ru(III) complex or an Ir(III)-sensitized polyoxotungstate hybrid, but also several systems in which electron or hole collection occurs at organic moieties such as perylenebis(dicarboximide), quinone-containing or oligotriarylamine-based units. In many cases the photodriven accumulation of charge requires the use of sacrificial electron donors, but there exist also a handful of studies in which redox equivalents can be accumulated without the use of such additives.

Photoinduced electron transfer in rhenium(I)-oligotriarylamine molecules.

Two molecular triads with an oligotriarylamine multielectron donor were synthesized and investigated with a view to obtaining charge-separated states in which the oligotriarylamine is oxidized 2-fold. Such photoinduced accumulation of multiple redox equivalents is of interest for artificial photosynthesis. The first triad was comprised of the oligotriarylamine and two rhenium(I) tricarbonyl diimine photosensitizers each of which can potentially accept one electron. In the second triad the oligotriarylamine was connected to anthraquinone, in principle an acceptor of two electrons, via a rhenium(I) tricarbonyl diimine unit. With nanosecond transient absorption spectroscopy (using an ordinary pump-probe technique) no evidence for the generation of 2-fold oxidized oligotriarylamine or 2-fold reduced anthraquinone was found. The key factors limiting the photochemistry of the new triads to simple charge separation of one electron and one hole are discussed, and the insights gained from this study are useful for further research in the area of charge accumulation in purely molecular (nanoparticle-free) systems. An important problem of the rhenium-based systems considered here is the short wavelength required for photoexcitation. In the second triad, photogenerated anthraquinone monoanion is protonated by organic acids, and the resulting semiquinone species leads to an increase in lifetime of the charge-separated state by about an order of magnitude. This shows that the proton-coupled electron transfer chemistry of quinones could be beneficial for photoinduced charge accumulation.

Photoinduced Electron Transfer in a Chromophore–Catalyst Assembly Anchored to TiO2

Photoinduced formation, separation, and buildup of multiple redox equivalents are an integral part of cycles for producing solar fuels in dye-sensitized photoelectrosynthesis cells (DSPECs). Excitation wavelength-dependent electron injection, intra-assembly electron transfer, and pH-dependent back electron transfer on TiO(2) were investigated for the molecular assembly [((PO(3)H(2)-CH(2))-bpy)(2)Ru(a)(bpy-NH-CO-trpy)Ru(b)(bpy)(OH(2))](4+) ([TiO(2)-Ru(a)(II)-Ru(b)(II)-OH(2)](4+); ((PO(3)H(2)-CH(2))(2)-bpy = ([2,2'-bipyridine]-4,4'-diylbis(methylene))diphosphonic acid); bpy-ph-NH-CO-trpy = 4-([2,2':6',2″-terpyridin]-4'-yl)-N-((4'-methyl-[2,2'-bipyridin]-4-yl)methyl) benzamide); bpy = 2,2'-bipyridine). This assembly combines a light-harvesting chromophore and a water oxidation catalyst linked by a synthetically flexible saturated bridge designed to enable long-lived charge-separated states. Following excitation of the chromophore, rapid electron injection into TiO(2) and intra-assembly electron transfer occur on the subnanosecond time scale followed by microsecond-millisecond back electron transfer from the semiconductor to the oxidized catalyst, [TiO(2)(e(-))-Ru(a)(II)-Ru(b)(III)-OH(2)](4+)→[TiO(2)-Ru(a)(II)-Ru(b)(II)-OH(2)](4+).

Interfacial Electron Transfer Dynamics Following Laser Flash Photolysis of [Ru(bpy)2((4,4′‐PO3H2)2bpy)]2+ in TiO2 Nanoparticle Films in Aqueous Environments

Nanosecond laser flash photolysis has been used to investigate injection and back electron transfer from the complex [(Ru(bpy)(2)(4,4'-(PO(3)H(2))(2)bpy)](2+) surface-bound to TiO(2) (TiO(2)-Ru(II)). The measurements were conducted under conditions appropriate for water oxidation catalysis by known single-site water oxidation catalysts. Systematic variations in average lifetimes for back electron transfer, <τ(bet)>, were observed with changes in pH, surface coverage, incident excitation intensity, and applied bias. The results were qualitatively consistent with a model involving rate-limiting thermal activation of injected electrons from trap sites to the conduction band or shallow trap sites followed by site-to-site hopping and interfacial electron transfer, TiO(2)(e(-))-Ru(3+) → TiO(2)-Ru(2+). The appearance of pH-dependent decreases in the efficiency of formation of TiO(2)-Ru(3+) and in incident-photon-to-current efficiencies with the added reductive scavenger hydroquinone point to pH-dependent back electron transfer processes on both the sub-nanosecond and millisecond-microsecond time scales, which could be significant in limiting long-term storage of multiple redox equivalents.

Photocatalytic reactions of porphyrin-based multielectron transfer sensitizers

Individual metal centers assisted by redox-active ligands can serve as active sites for photocatalytic multielectron transfer (MET) substrate transformations. In porphyrin-based mononuclear systems, the primary steps of excitation and charge stabilization are mediated by the tetrapyrrole ligand acting both as photosensitizer and intermediate charge reservoir. Accumulation and transfer of multiple redox equivalents requires a binding site that provides at least two stable oxidation states separated by more than one unit. The reversible photoconversion between low- and high-valent antimony porphyrins is described as an example of MET sensitization.