Multiple Cross Displacement Amplification Assay Research Articles

Development and clinical evaluation of a real-time multiple cross displacement amplification assay for rapid and sensitive detection of Mycobacterium tuberculosis

Molecular techniques of nucleic acid testing recommended by the World Health Organization (WHO) for the Mycobacterium tuberculosis (MTB) detection were considered to have the potential access to the accurate tuberculosis (TB) notifications. In this study, a new method, which coupled real-time (rt) fluorescence technique with multiple cross displacement amplification (MCDA), was developed for the rapid, sensitive and specific detection of MTB (termed MTB-rt-MCDA). According to the principle of the rt-MCDA test, a set of ten primers were designed for the MCDA reaction, of which one was engineered with a restrictive endonuclease recognition site, a fluorophore and a quencher for achieving the real-time fluorescence detection. MTB-rt-MCDA test was conducted under the optimized conditions (67 °C, 40 min) on the real-time fluorescence platform. The MTB-rt-MCDA assay accurately identified the MTB strains with no cross reaction with other bacteria. The lowest detectable genomic DNA concentration of the MTB-rt-MCDA assay was 25 fg/μl. We employed the genomic DNA templates extracted from sputum of clinical cases for validating the practical applicability of this assay, and the detection power of the MTB-rt-MCDA assay was comparable to that of the Xpert method and MCDA-based biosensor detection and superior to smear microscope method. The complete process of the MTB-rt-MCDA assay, including rapid extraction of DNA and rt-MCDA test, takes less than 1 h. In conclusion, the presented MTB-rt-MCDA assay provided an effective and simple option for the rapid screening of MTB infection.

Real-time multiple cross displacement amplification assay for rapid and sensitive detection of Haemophilus influenzae.

Haemophilus influenzae is an opportunistic pathogen usually causing bacteremia, meningitis, and pneumonia in children. Here, we developed a method based on multiple cross displacement amplification (MCDA) method and real-tme fluorescence technique for rapid detection of H. influenzae. A set of 10 primers was designed for the H. influenzae real-time MCDA reaction, and a core primer was modified with a restriction endonuclease recognition sequence, a fluorescent, and a quencher according to the principle of the real-time MCDA assay. The H. influenzae real-time MCDA reactions were performed using a fluorescence instrument at 63°C for 40 min. The H. influenzae real-time MCDA assay can specifically detect H. influenzae without any cross-reaction with other bacteria as our results confirmed. The sensitivity of our assay is as low as 10 CFU per reaction. To validate its feasibility, our assay was applied to 40 DNA extracted from sputum samples. The results obtained from H. influenzae real-time MCDA were compared with that of H. influenzae–loop-mediated isothermal amplification (H. influenzae-LAMP) and MCDA-based lateral flow biosensor (MCDA-LFB). The positive rate of the real-time MCDA assay was 62.5%, which was consistent with the H. influenzae-MCDA-LFB assay, but was more sensitive than H. influenzae-LAMP (57.5%). Furthermore, the H. influenzae real-time MCDA assay takes only 40 min, which was less than that of a traditional PCR test. Taken together, the H. influenzae real-time MCDA assay reported here offers a new and valuable diagnostic tool for the reliable and rapid detection of H. influenzae.

Multiple Cross Displacement Amplification Combined With Real-Time Polymerase Chain Reaction Platform: A Rapid, Sensitive Method to Detect Mycobacterium tuberculosis.

In this study, we evaluated the diagnostic accuracy of multiple cross displacement amplification (MCDA) combined with real-time PCR platform in pulmonary tuberculosis (PTB) patients. Total 228 PTB patients and 141 non-TB cases were enrolled. Based on the analysis of the first available sample of all participants, MCDA assay showed a higher overall sensitivity (64.0%), with a difference of more than 10% compared with Xpert MTB/RIF (Xpert) assay (51.8%, P < 0.05) and combined liquid and solid culture (47.8%, P < 0.001) for PTB diagnosis. In particular, MCDA assay detected 31 probable TB patients, which notably increased the percentage of confirmed TB from 57.9% (132/228) to 71.5% (163/228). The specificities of microscopy, culture, Xpert and MCDA assay were 100% (141/141), 100% (141/141), 100% (141/141), and 98.6% (139/141), respectively. Among the patients with multiple samples, per patient sensitivity of MCDA assay was 60.5% (52/86) when only the first available sputum sample was taken into account, and the sensitivity increased to 75.6% (65/86) when all samples tested by MCDA assay were included into the analysis. Therefore, MCDA assay established in this study is rapid, accurate and affordable, which has the potential in assisting the accurate and rapid diagnosis of PTB and speed up initiation of TB treatment in settings equipped with real-time PCR platform.

Two target genes based multiple cross displacement amplification combined with a lateral flow biosensor for the detection of Mycobacterium tuberculosis complex

BackgroundTuberculosis (TB) is a serious chronic infectious disease caused by Mycobacterium tuberculosis complex (MTBC). Hence, the development of a novel, simple, rapid and sensitive method to detect MTBC is of great significance for the prevention and treatment of TB.ResultsIn this study, multiple cross displacement amplification (MCDA) combined with a nanoparticle-based lateral flow biosensor (LFB) was developed to simultaneously detect two target genes (IS6110 and mpb64) of MTBC (MCDA-LFB). One suite of specific MCDA primers designed for the IS6110 and mpb64 genes was validated using genomic DNA extracted from the reference strain H37Rv. The MCDA amplicons were analyzed using a real-time turbidimeter, colorimetric indicator (malachite green, MG) and LFBs. The optimal amplification temperature and time were confirmed, and the MCDA-LFB method established in the current report was evaluated by detecting various pathogens (i.e., reference strains, isolates and clinical sputum samples). The results showed that the two sets of MCDA primers targeting the IS6110 and mpb64 genes could effectively detect MTBC strains. The optimal reaction conditions for the MCDA assay were determined to be 67 °C for 35 min. The MCDA assay limit of detection (LoD) was 100 fg per reaction for pure genomic DNA. The specificity of the MCDA-LFB assay was 100%, and there were no cross-reactions for non-MTBC strains. For sputum samples and MTBC strain detection, the positive rate of MCDA-LFB for the detection of MTBC strains was consistent with seminested automatic real-time PCR (Xpert MTB/RIF) and higher than acid-fast staining (AFS) and culture assays when used for sputum samples. The MCDA-LFB assay was a rapid tool, and the whole procedure for MCDA-LFB, including DNA template preparation, MCDA reaction and amplification product analysis, was completed within 70 min.ConclusionThe MCDA-LFB assay targeting the IS6110 and mpb64 genes is a simple, rapid, sensitive and reliable detection method, and it has potential significance for the prevention and treatment of TB.

Multiple Cross Displacement Amplification Linked with Nanoparticles-Based Lateral Flow Biosensor in Screening of Hepatitis B Virus in Clinical Application.

BackgroundHepatitis B virus (HBV) is a common pathogen that predominantly causes severe liver disease, and remains one of a huge challenge worldwide, especially in many resource-constrained areas. Developing a low-cost, sensitive, specific, and rapid approach for screening HBV is critical for its treatment and prevention. In the current study, a novel molecular detection approach, multiple cross displacement amplification (MCDA) coupled with polymer nanoparticle-based lateral flow biosensor (MCDA-LFB), was applied for detection of HBV in blood samples.MethodsHBV standard substance and clinical donor serum samples were collected and used for the establishment and confirmation of the HBV-MCDA-LFB assay. A set of 10 MCDA primers was designed according to HBV-specific gene S. The HBV-MCDA-LFB assay conditions, including genomic template concentration, MCDA reaction temperature and time were optimized. The sensitivity and specificity of the HBV-MCDA -LFB assay were evaluated in this report. The HBV-MCDA-LFB assay was applied to detect the HBV agent from clinical samples.ResultsThe HBV-MCDA primers based on the S gene were valid for establishment of MCDA assay. The HBV-MCDA reaction with optimized conditions could be carried out at a constant temperature 64°C for 35 min. The whole process, including sample preparation (5 min), genomic template extraction (~30 min), MCDA amplification (35 min), and LFB reading (~2 min), could be completed within 80 min. The sensitivity of this assay was 5 IU per reaction. The specificity was 100% for HBV-MCDA-LFB assay.ConclusionThese results confirmed that the HBV-MCDA-LFB is a low-cost, sensitive, specific, simple, and rapid method for detecting HBV agents. This technique has great potential to develop a point-of-care testing (POCT) method in clinical practice, especially in endemic and resource-constrained regions.

Development and comparison of novel multiple cross displacement amplification (MCDA) assays with other nucleic acid amplification methods for SARS-CoV-2 detection

The development of alternative isothermal amplification assays including multiple cross displacement amplification (MCDA) may address speed and portability limitations of real-time PCR (rt-PCR) methods for SARS-CoV-2 detection. We developed a novel SARS-CoV-2 MCDA assay and compared its speed and sensitivity to loop-mediated isothermal amplification (LAMP) and rt-PCR. Two MCDA assays targeting SARS-CoV-2 N gene and ORF1ab were designed. The fastest time to detection and sensitivity of MCDA was compared to LAMP and rt-PCR using DNA standards and transcribed RNA. For the N gene, MCDA was faster than LAMP and rt-PCR by 10 and 20 min, respectively with fastest time to detection at 5.2 min. rt-PCR had the highest sensitivity with the limit of detection at 10 copies/µl compared with MCDA (100 copies/µl) and LAMP (500 copies/µl). For ORF1ab, MCDA and LAMP had similar speed with fastest time to detection at 9.7 and 8.4 min, respectively. LAMP was more sensitive for ORF1ab detection with 50 copies/µl compared to MCDA (500 copies/µl). In conclusion, different nucleic acid amplification methods provide different advantages. MCDA is the fastest nucleic acid amplification method for SARS-CoV-2 while rt-PCR is the most sensitive. These advantages should be considered when determining the most suitable nucleic acid amplification methods for different applications.

Visual multiple cross displacement amplification for the rapid identification of S. agalactiae immediately from vaginal and rectal swabs

Streptococcus agalactiae (S. agalactiae) is an important pathogen that can lead to neonatus and mother infection. The current existing techniques for the identification of S. agalactiae are limited by accuracy, speed and high-cost. Therefore, a new multiple cross displacement amplification (MCDA) assay was developed for test of the target pathogen immediately from vaginal and rectal swabs. MCDA primers screening were conducted targeting S. agalactiae pcsB gene, and one set of MCDA primers with better rapidity and efficiency was selected for establishing the S. agalactiae-MCDA assay. As a result, the MCDA method could be completed at a constant temperature of 61 °C, without the requirement of special equipment. The detection limit is 250 fg (31.5 copies) per reaction, all S. agalactiae strains displayed positive results, but not for non-S. agalactiae strains. The visual MCDA assay detected 16 positive samples from 200 clinical specimen, which were also detected positive by enrichment/qPCR. While the CHROMagar culture detected 6 positive samples. Thus, the MCDA assay is prefer to enrichment/qPCR and culture for detecting S. agalactiae from clinical specimen. Particularly, the whole test of MCDA takes about 63.1 min, including sample collection (3 min), DNA preparation (15 min), MCDA reaction (45 min) and result reporting (6 s). In addition, the cost was very economic, with only US$ 4.9. These results indicated that our S. agalaciae-MCDA assay is a rapid, sensitive and cost-efficient technique for target pathogen detection, and is more suitable than conventional assays for an urgent detection, especially for 'on-site' laboratories and resource-constrained settings.

Identification of Acinetobacter baumannii and its carbapenem-resistant gene blaOXA-23-like by multiple cross displacement amplification combined with lateral flow biosensor

Acinetobacter baumannii is a frequent cause of the nosocomial infections. Herein, a novel isothermal amplification technique, multiple cross displacement amplification (MCDA) is employed for detecting all A. baumannii strains and identifying the strains harboring blaOXA-23-like gene. The duplex MCDA assay, which targets the pgaD and blaOXA-23-like genes, could identify the A. baumannii isolates and differentiate these isolates harboring blaOXA-23-like gene. The disposable lateral flow biosensors (LFB) were used for analyzing the MCDA products. A total of sixty-eight isolates, include fifty-three A. baumannii strains and fifteen non-A. baumannii strains, were employed to optimize MCDA methods and determine the sensitivity, specificity and feasibility. The optimal reaction condition is found to be 63 °C within 1 h, with limit of detection at 100 fg templates per tube for pgaD and blaOXA-23-like genes in pure cultures. The specificity of this assay is 100%. Moreover, the practical application of the duplex MCDA-LFB assay was evaluated using clinical samples, and the results obtained from duplex MCDA-LFB method were consistent with conventional culture-based technique. In sum, the duplex MCDA-LFB assay appears to be a reliable, rapid and specific technique to detect all A. baumannii strains and identify these strains harboring blaOXA-23-like gene for appropriate antibiotic therapy.

Isothermal amplification and rapid detection of Klebsiella pneumoniae based on the multiple cross displacement amplification (MCDA) and gold nanoparticle lateral flow biosensor (LFB).

Klebsiella pneumoniae (K. pneumoniae) is a frequent pathogen causing nosocomial infections and outbreaks. We developed a multiple cross displacement amplification (MCDA) assay for the detection of K. pneumoniae, which can get the positive results within 40 minutes’ isothermal amplification. Gold-nanoparticle lateral flow biosensor (LFB) and colorimetric indicators were used for the rapid readouts of MCDA amplification. The detection limit of this assay was 100 fg per reaction at 65°C, which was confirmed to be the optimal amplification temperature according to the real time turbidimeters. For specificity, all of the 30 clinical-source K. pneumoniae strains were positive for the MCDA, and all of the non-K. pneumoniae strains belonging to 31 different species were negative for this MCDA assay. To evaluate the practical applicability of this method, we assessed its detection limit for K. pneumoniae strains in sputum samples (24 CFU per reaction), and DNA templates of 100 sputum samples further underwent the MCDA-LFB tests. All of the sputum samples being positive for K. pneumoniae (30/100) with the culture method were successfully identified with the MCDA assay, the detection power of which was higher than that of polymerase chain reaction (PCR) (25/100). Thus, the MCDA test for K. pneumoniae combined with the gold nanoparticle LFB as the results readout scheme, are simple, specific, and sensitive methods for the rapid diagnosis of K. pneumoniae in clinical samples.

Rapid and Sensitive Isothermal Detection of Nucleic-acid Sequence by Multiple Cross Displacement Amplification.

We have devised a novel amplification strategy based on isothermal strand-displacement polymerization reaction, which was termed multiple cross displacement amplification (MCDA). The approach employed a set of ten specially designed primers spanning ten distinct regions of target sequence and was preceded at a constant temperature (61–65 °C). At the assay temperature, the double-stranded DNAs were at dynamic reaction environment of primer-template hybrid, thus the high concentration of primers annealed to the template strands without a denaturing step to initiate the synthesis. For the subsequent isothermal amplification step, a series of primer binding and extension events yielded several single-stranded DNAs and single-stranded single stem-loop DNA structures. Then, these DNA products enabled the strand-displacement reaction to enter into the exponential amplification. Three mainstream methods, including colorimetric indicators, agarose gel electrophoresis and real-time turbidity, were selected for monitoring the MCDA reaction. Moreover, the practical application of the MCDA assay was successfully evaluated by detecting the target pathogen nucleic acid in pork samples, which offered advantages on quick results, modest equipment requirements, easiness in operation, and high specificity and sensitivity. Here we expounded the basic MCDA mechanism and also provided details on an alternative (Single-MCDA assay, S-MCDA) to MCDA technique.